BINUCLEAR METAL CHELATES OF BISACETYLACETONE BIPHENYLDIHYDRAZONE

Abstract

Reaction of bihenyl-4,4′-tetrazonium ion with 2,4-pentanedione leads to 3,3′-(4,4′-biphenyldihydrazoni)bis-(2,4-pentanedione).The compound exists in the intramolecularly hydrogen bonded dihydrazone state. Copper(II), nickel(II) and palladium(II) complexes having the composition M₂L₂ have been synthesised and characterised. Ir, ¹H and ¹³C nmr and mass spectroscopic data clearly indicate the binucleating nature of the chelates in which the hydrogen bonded carbonyls and one of the hydrazono nitrogens of each pentanedione group are involved in bonding with the metal ion.     

Synthesis of 4,4′-bis(dichloroamino)- and 4,4′-bis(chloroamino)-3,3′-azofurazans,the first representatives of dichloroamino- and chloroaminofurazans

First representatives of dichloroamino- and chloroaminofurazans, viz., 4,4′-bis(dichloroamino)- and 4,4′-bis(chloroamino)-3,3′-azofurazans, were synthesized by the chlorination of 4,4′-diamino-3,3′-azofurazan with sodium hypochlorite in the CH₂Cl₂—H₂O mixture.     

Vacuum annealing phenomena in ultrathin TiD y /Pd bi-layer films evaporated on Si(100) as studied by TEM and XPS

Using a combination of TEM and XPS, we made an analysis of the complex high-temperature annealing effect on ultrathin titanium deuteride (TiD _y ) films evaporated on a Si(100) substrate and covered by an ultrathin palladium layer. Both the preparation and annealing of the TiD _y /Pd bi-layer films were performed in situ under UHV conditions. It was found that the surface and bulk morphology of the bi-layer film as well as that of the Si substrate material undergo a microstructural and chemical conversion after annealing and annealing-induced deuterium evolution from the TiD _y phase. Energy-filtered TEM (EFTEM) mapping of cross-section images and argon ion sputter depth profiling XPS analysis revealed both a broad intermixing between the Ti and Pd layers and an extensive inter-diffusion of Si from the substrate into the film bulk area. Segregation of Ti at the Pd top layer surface was found to occur by means of angle-resolved XPS (ARXPS) and the EFTEM analyses. Selected area diffraction (SAD) and XPS provided evidence for the formation of a new PdTi₂ bimetallic phase within the top region of the annealed film. Moreover, these techniques allowed to detect the initial stages of TiSi phase formation within the film–substrate interlayer.     

Structural and chemical characterisation of titanium deuteride films covered by nanoscale evaporated palladium layers

Thin titanium deuteride (TiD_y) films, covered by an ultra-thin palladium layer, have been compared with the corresponding titanium and palladium films using a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The TiD_y layers were prepared under ultra-high vacuum (UHV) conditions by precisely controlled deuterium sorption at 298 K on a Ti film evaporated onto a Si(100) substrate. Both Ti and TiD_y films were then covered in situ by a nanoscale Pd layer. It was found that a 10- to 12-nm-thick Pd layer protects the TiD_y films efficiently against extensive air interaction. The morphology of both the surface and bulk Pd/TiD_y (Ti) films have been observed using SEM and cross-sectional TEM analysis, respectively. A polycrystalline bulk morphology in both Ti and TiD_y films accompanied by a fine-grained Pd surface was observed. High-magnification cross-sectional TEM images reveal the TiD_y film to be plastically deformed leading to an increase in the roughness of the top Pd layer. Complex structures, including Moiré patterns, have been identified within the Pd/TiD_y interface. The chemical nature of this interface has been analysed after partial sputtering of the Pd top layer using XPS. Besides TiD_y and Pd, TiO and PdO were found to be the main chemical species in the interface region of the Pd/TiH_y film. The XPS valence-band spectra of the Pd/TiD_y interface reveal electronic features characteristic of a Pd–Ti bimetallic structure.     

Stability studies of an electrochemically formed [C60]fullerene-palladium two-component film

The stability of C₆₀ and palladium two-component films, C₆₀/Pd, has been investigated. The effect of different polymerization conditions on the electrochemical stability of the film upon prolonged potential cycling has been studied. Stable voltammetric behavior was observed for polymers formed at potentials less negative than the potential of third C₆₀ reduction step. The incorporation of palladium particles into the structure of C₆₀/Pd polymers increases the polymer stability. The C₆₀/Pd films are doped with supporting electrolyte cations during reduction. The size of these cations is a crucial factor in determining the stability of the film. A strong solvent effect on the potential stability of the film was also observed. The wildest range of stable voltammetric properties was found for acetonitrile and N,N-dimethylformamide. No effect of the temperature on the film stability was observed. The results reported in this work allow for the determination of the optimal conditions for the formation of stable C₆₀/Pd films.     

Two-component polymer films of palladium and fullerene with covalently linked crown ether voids: effect of cation binding on the redox behavior

Redox active films have been generated via electrochemical reduction in a solution containing palladium(II) acetate and fulleropyrrolidine with covalently linked crown ethers, viz., benzo-15-crown-5 and benzo-18-crown-6. In these films, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Films show ability to coordinate alkali metal cations from the solution. Therefore, in solutions containing salts of alkali metal cations, benzo-15-crown-5-C₆₀/Pd and benzo-18-crown-6-C₆₀/Pd films are doped with cations coordinated by crown ether moiety and anions of supporting electrolyte which enter the film to balance positive charge. These films are electrochemically active in the negative potential range due to the reduction of the fullerene moiety. Reduction of the polymer is accompanied by the transport of supporting electrolyte ions between solution and solid phase. In solution containing alkali metal salts, the process of film reduction is accompanied by the transport of anions from the film to the solution. In the presence of tetra(alkyl)ammonium salts, transport of cations from the solution to the film takes place during the polymer reduction.     

Synthesis and Characterization of Monomeric Aryloxo Palladium Complexes of the Type [Pd(N–N)(OAr)(C6F5)]. Crystal Structure of [Pd(tmeda)(C6F5)(OC6H4NO2‐p)]

Mononuclear palladium‐hydroxo complexes of the type [Pd(N–N)(C₆F₅)(OH)][(N–N) = 2,2′‐bipyridine (bipy), 4,4′‐dimethyl‐2,2′‐bipyridine (Me₂bipy), 1,10‐phenantroline (phen) or N,N,N′,N′‐tetramethylethylenediamine (tmeda) react with phenols ArOH in tetrahydrofuran giving the corresponding aryloxo complexes [Pd(N–N)(C₆F₅)(OAr)]. Elemental analyses and spectroscopic (IR, ¹H and ¹⁹F) methods have been used to characterize the new complexes. The X‐ray crystal structure of [Pd(tmeda)(C₆F₅)(OC₆H₄NO₂‐p)] has been determined. In the crystal packing the planes defined by two C₆H₄ rings show a parallel orientation. There are also intermolecular C–H···F and C‐H···O hydrogen bonds.     

Homo- and copoly(arylene ether ketones) with side hydroxyl groups

The polycondensation of 2-β-oxyethyl-3,3-bis(4-oxyphenyl)phthalimidine with 4,4′-difluorobenzophenone proceeding via the nucleophilic substitution of the activated halogen atom in aryl halide has been studied. Conditions ensuring formation of noncrosslinked high-molecular-mass homo- and copoly(arylene ether ketones) containing side alcoholic hydroxyl groups (4,4′-difluorobenzophenone: a mixture of bisphenols: K₂CO₃: Na₂CO₃ = 1: 1: 1: 0.05) have been established. The polymers have M _w = (20–88.7) × 10³ and show good solubility in organic solvents; their onset temperatures of softening are in the range 195–250°C. Polymer films cast from solution are characterized by a breaking strength of 78–109 MPa.     

Syntheses and Crystal Structures of Two One-Dimensional Chain Copper Benzoylacetone Complexes Bridged Through Azobispyridine Ligands

Two copper complexes [Cu(bzac)₂(4,4′-azpy)]·H₂O (1) and [Cu(bzac)₂(3,3′-azpy)] (2) (bzac = benzoylacetone, 4,4′-azpy = 4,4′-azobispyridine, 3,3′-azpy = 3,3′-azobispyridine) have been synthesized and characterized. The crystal structures were determined by X-ray diffraction analysis. In crystals of Complexes 1 and 2, the copper atoms have distorted octahedral symmetry. The two compounds possess very similar one-dimensional linear chains linked through the rod-like 4,4′-azpy or 3,3′-azpy ligands.     

Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

Organosoluble polyimides and copolyimides based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐phenylethane and aromatic dianhydrides

1,1‐Bis[4‐(4‐aminophenoxy)phenyl]‐1‐phenylethane (BAPPE) was prepared through nucleophilic substitution reaction of 1,1‐bis(4‐hydroxyphenyl)‐1‐phenylethane and p‐chloronitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Novel organosoluble polyimides and copolyimides were synthesized from BAPPE and six kinds of commercial dianhydrides, including pyromellitic dianhydride (PMDA, I_a ), 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA, I_b ), 3,3′,4,4′‐ biphenyltetracarboxylic dianhydride (BPDA, I_c ), 4,4′‐oxydiphthalic anhydride (ODPA, I_d ), 3,3′,4,4′‐diphenylsulfonetetracarboxylic dianhydride (DSDA, I_e ) and 4,4′‐hexafluoroisopropylidenediphthalic anhydride (6FDA, I_f ). Differing with the conventional polyimide process by thermal cyclodehydration of poly(amic acid), when polyimides were prepared by chemical cyclodehydration with N‐methyl‐2‐pyrrolidone as used solvent, resulted polymers showed good solubility. Additional, I_a,b were mixed respectively with the rest of dianhydrides (I_c–f) and BAPPE at certain molar ratios to prepare copolyimides with arbitrary solubilities. These polyimides and copolyimides were characterized by good mechanical properties together with good thermal stability. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2082–2090, 2000     

The synthesis of a precursor of polybenzimidazole (PBI) and blends with polyamic acid (PAA)

The precursor of polybenzimidazole (PBI), poly(3,3′-diamino-4,4′-benzidine isophthalamide) (PDABI), was synthesized from poly(3,3′-dinitro-4,4′-benzidine isophthalamide) (PDNBI) by reduction. With increasing temperature, the NH₂ moiety which was protected by SnCl₅^?1 could cyclize and form PBI. Blends with polyamic acid (LaRC-TPI) were prepared. Clear blend films were prepared at up to 400°C. The IR spectra displayed shifts in the NH stretching band, thereby providing evidence for specific interactions related to the miscibility of their cured blends. © 1993 John Wiley & Sons, Inc.     

High‐pressure sorption of carbon dioxide and methane in all‐aromatic poly(etherimide)‐based membranes

The sorption of compressed carbon dioxide and methane in a series of all‐aromatic poly(etherimide) (PEI) thin films is presented. The polymer films are derived from the reactions between an arylether diamine (P1) and four different dianhydrides [3,3′,4,4′‐oxydiphthalic dianhydride (ODPA), 3,3′,4,4′ biphenyltetra‐carboxylic dianhydride (BPDA), 3,3′,4,4′‐benzo‐phenonetetracarboxylic dianhydride (BTDA), and pyromellitic dianhydride (PMDA)] that have been selected to systematically change the flexibility of the polymer backbone, the segmental mobility, and the nonequilibrium excess free volume (EFV) of the polymer. The EFV, gas sorption capacities, and sorption‐ and temperature‐induced dynamic changes in film thickness and refractive index have been investigated by spectroscopic ellipsometry. The sorption capacity depends to a great extent on the PEI backbone composition. PMDA‐P1 shows the highest carbon dioxide sorption, combined with the lowest sorption selectivity because of the predominant sorption of methane in the EFV. For ODPA‐P1, the highest sorption selectivity is obtained, while it shows little long‐term relaxations at carbon dioxide pressures up to 25 bar. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 986–993     

Synthesis and Catalytic Properties of Di- and Trinuclear Palladium Complexes with PCP-Pincer Ligands

Linear and branched conjugated pincer ligands having Ph₂P groups were synthesized: 3,3',5,5'- tetrakis(diphenylphosphinomethyl)diphenylacetylene, 3,3',5,5'-tetrakis(diphenylphosphinomethyl)diphenyldi- acetylene, 1,3,5-tris[3,5-bis(diphenylphosphinomethyl)phenylethynyl]benzene, and hexakis[3,5-bis(diphenylphosphinomethyl)phenylethynyl]benzene. Palladation of these ligands by heating with Pd(BF₄)₂(MeCN)₄ in boiling acetonitrile gave the corresponding di- and trinuclear ionic pincer palladium complexes. No individual complex was obtained from hexakis[3,5-bis(diphenylphosphinomethyl)phenylethynyl]benzene. The ionic com- plexes were converted into the corresponding chloride complexes by treatment with sodium chloride in a mixture of water with methylene chloride. The structure of the ionic palladium complex with 3,3',5,5'-tetrakis(diphenylphosphinomethyl)diphenylacetylene was established by X-ray analysis. The obtained palladium complexes exhibited a considerable catalytic activity in the Heck reaction of iodobenzene with ethyl acrylate and in the Michael addition of ethyl cyanoacetate with methyl vinyl ketone. The catalytic activity per palladium atom decreases as the number of palladium atoms in the complex increases.     

Microstructural and chemical transformation of thin Ti/Pd and TiD<Subscript><Emphasis Type="BoldItalic">y</Emphasis></Subscript>/Pd bilayer films induced by vacuum annealing

Using a combination of scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction and X-ray photoelectron spectroscopy (XPS), we made a comparative study of the high-temperature annealing impact on thin titanium deuteride (TiD _y ) films covered by an ultrathin Pd layer, and on Ti/Pd bilayer films. The bilayer films were prepared under ultrahigh vacuum conditions and were in situ annealed using the same annealing procedure. It was found that the surface and the bulk morphology of both films undergo different annealing-induced transformations, leading to an extensive intermixing between the Ti and Pd layers and the formation of a new PdTi₂ bimetallic phase. Energy-filtered TEM imaging and energy-dispersive X-ray spectrometry analysis, as well as XPS depth profiling all provided evidence of a different distribution of Pd and Ti in the annealed TiD _y /Pd film compared with the annealed Ti/Pd film. Our results show that thermal decomposition of TiD _y , as a consequence of annealing the TiD _y /Pd film, modifies the intermixing process, thereby promoting Ti diffusion into the Pd-rich top layer of the TiD _y film and thus providing a more likely path for the formation of the PdTi₂ phase than in an annealed Ti/Pd film. Figure Figure Microstructural and chemical characterisation of thin TiDy/Pd film after annealing     

Synthesis and micropatterning properties of a novel base‐soluble,positive‐working,photosensitive polyimide having an o‐nitrobenzyl ether group

A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et₃N. The DHBA monomer was synthesized by exhaustive KMnO₄ oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from ¹H NMR absorption of benzylic CH₂ protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm² when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007     

The effect of morphology on sorption and transport of carbon dioxide in a polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and 4,4′-oxydianiline

Sorption and transport of CO₂ have been investigated for polyimide films prepared from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-oxydianilline (ODA) as well as for a chemically identical commercial polyimide film, Upilex-R. The BPDA-ODA polyimide films annealed above the glass transition temperature (270°C) are found to have some degree of ordering owing to molecular aggregation of polymer chains, whereas the films as-cast are amorphous. The solubility, permeability, and diffusion coefficients decrease significantly with increasing density or increasing average degree of molecular aggregation. The influence of morphology on the parameters in the dual-mode sorption and transport model has also been investigated. With an increase in density, the Langmuir capacity constant and the diffusion coefficients for Henry's law and Langmuir populations decrease by a larger factor than the Henry's law solubility constant. These results can be tentatively interpreted by assuming either a one-phase or two-phase structure for these polyimide films.     

Novel Non‐Coplanar and Tertbutyl‐Substituted Polyimides: Solubility,Optical, Thermal and Dielectric Properties

A novel aromatic diamine monomer bearing tertbutyl and 4‐tertbutylphenyl groups, 3,3′‐ditertbutyl‐4,4′‐diaminodiphenyl‐4′′‐tertbutylphenylmethane (TADBP), was prepared and characterized. A series of non‐coplanar polyimides (PIs) were synthesized via a conventional one‐step polycondensation from TADBP and various aromatic dianhydrides including pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (OPDA), 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and 4,4′‐(hexafluoroisopropylidene)dipthalic anhydride (6FDA). All PIs exhibit excellent solubility in common organic solvents such as N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), dimethyl sulfoxide (DMSO), chloroform (CHCl₃), tetrahydrofuran (THF), and so on. Furthermore, the obtained transparent, strong and flexible polyimide films present good thermal stability and outstanding optical properties. Their glass transition temperatures (T_gs) are in the range of 298 to 347°C, and 10% weight loss temperatures are in excess of 490°C with more than 53% char yield at 800°C in nitrogen. All the polyimides can be cast into transparent and flexible films with tensile strength of 80.5–101 MPa, elongation at break of 8.4%–10.5%, and Young's modulus of 2.3–2.8 GPa. Meanwhile, the PIs show the cutoff wavelengths of 302–356 nm, as well as low moisture absorption (0.30% –0.55%) and low dielectric constant (2.78–3.12 at 1 MHz).     

Interaction of Pd-overlayers with SnO2: comparative XPS, SIMS, and SNMS studies

Summary We report about interaction processes between palladium (Pd) and tin dioxide (SnO₂) studied with various surface spectroscopic techniques. Total sputter yields necessary for absolute depth calibration in SIMS are determined for SnO₂. Clustering of palladium occurs at low temperatures. Small changes in the XPS relative core level intensities of Pd and Sn allow to determine cluster sizes. Oxidation of Pd in the presence of oxygen at T470 K is a prerequisite for diffusion of Pd²⁺ ions into SnO₂ layers. The latter process is confirmed and described quantitatively by evaluating the SIMS and SNMS measurements.     

Recyclable Palladium Catalysts for the Heck/Sonogashira Reaction under Microwave‐assisted Thermomorphic Conditions

The reaction of allyl palladium(II) chloride dimer and 4,4′‐bis(R_fCH₂OCH₂)‐2,2′‐bpy, 1a–b , in the presence of AgOT_f resulted in the synthesis of cationic palladium complex, [Pd(η³‐allyl)(4,4′‐bis‐(R_fCH₂OCH₂)‐2,2′‐bpy)](OT_f), 2a–b where R_f = C₉F₁₉ ( a ), C₁₀F₂₁ ( b ), respectively. The reaction of [PdCl₂(CH₃CN)] or K₂PdCl₄ with 1b , gave rise to the synthesis of [PdCl₂(4,4′‐bis‐(C₁₀F₂₁CH₂OCH₂)‐2,2′‐bpy)], 3b . The quantitatively determined solubility curves of 2a–b and 3b in DMF indicated dramatic increase of solubility for 2a – b and 3b from ?40 to 90 °C. The catalyst‐recoverable Pd‐catalyzed Heck/Sonogashira reactions were successfully achieved in DMF with microwave‐assistance. The cationic Pd‐catalyzed Heck arylation of methyl acrylate was selected to demonstrate the feasibility of recycling 2a–b using DMF as a solvent under microwave‐assisted thermomorphic conditions. At the end of each cycle, the product mixtures were cooled, and then the catalysts were recovered by decantation. The Heck arylation catalyzed by 2b under microwave‐assisted mode exhibited good recycling results favoring the trans product. To our knowledge, this is the first example of cationic Pd‐catalyzed Heck arylation under microwave‐assisted thermomorphic conditions. Additionally, recoverable 3b ‐catalyzed Sonogashira reactions were also achieved successfully in DMF. The reactions under microwave‐assistance gave much better results in yield and in efficiency than that under conventional thermal heating.