共查询到20条相似文献,搜索用时 31 毫秒
1.
D. N. Marjit V. Kalpagam U. S. Nandi 《Journal of polymer science. Part A, Polymer chemistry》1983,21(3):803-810
The free radical polymerization of acrylonitrile (AN) initiated by Cu(II) 4-anilino 2-one [Cu(II) ANIPO] Cu(II), 4-p-toluedeno 3-pentene 2-one [Cu(II) TPO], and Cu(II) 4-p-nitroanilino 3-pentene 2-one [Cu(II) NAPO] was studied in benzene at 50 and 60°C and in carbon tetrachloride (CCl4), dimethyl sulfoxide (DMSO), and methanol (MeOH) at 60°C. Although the polymerization proceeded in a heterogeneous phase, it followed the kinetics of a homogeneous process. The monomer exponents were ≥2 at two different temperatures and in different solvents. The square-root dependence of Rp on initiator concentration and higher monomer exponents accounted for a 1:2 complex formation between the chelate and monomer. The complex formation was shown by ultraviolet (UV) study. The activation energies, kinetics, and chain transfer constants were also evaluated. 相似文献
2.
Sébastien Perrier Steven P. Armes X. S. Wang F. Malet David M. Haddleton 《Journal of polymer science. Part A, Polymer chemistry》2001,39(10):1696-1707
α-Methoxypolyethylene oxide methacrylate was polymerized by copper(I)-mediated living radical polymerization in aqueous solution to give polymers with controlled number-average molecular masses and narrow polydispersities. When equimolar quantities of initiator with respect to copper(I) bromide were used, the reaction was extremely fast with quantitative conversion achieved in less than 5 min at ambient temperature. However, the molecular weight distribution was broad, and control over the number-average molecular weight (Mn) growth was extremely poor; this is ascribed to an increase in termination because of the increased rate as a result of the coordination of water at the copper center. The complex formed between copper(I) bromide and N-(n-propyl)-2-pyridylmethanimine, bis[N-(n-propyl)-2-pyridylmethanimine]copper(I), was demonstrated to be stable in aqueous solution by 1H NMR over 10 h at 25 °C. However, on increasing the temperature to 50 °C, decomposition occurred rapidly. Thus, polymerization temperatures were maintained at ambient temperature. When longer alkyl chains were utilized in the ligand, that is, pentyl and octyl, the complex acted as a surfactant leading to heterogeneous solutions. When the catalyst concentration was reduced by two orders of magnitude, the rate of polymerization was reduced with 100% conversion achieved after 60 min with the Mn of the final product being higher than that predicted and the polydispersity equal to 1.43. Copper(II) was added as an inhibitor to circumvent these problems. When 10% of Cu(I) was replaced by Cu(II) {[Cu(I)] + [Cu(II)]/[I] = 1/100}, the mass distribution showed a bimodal distribution, and the rate of polymerization decreased significantly. With a catalyst composition [Cu(I)]/[Cu(II)] = 0.5/0.5 {[Cu(I)] + [Cu(II)]}/[I] = 1/100, polymerization proceeded slowly with 80% conversion reached after 22 h. Thus, the concentration of Cu(I) was further reduced with [Cu(I)]/[Cu(II)] = 10/90, {[Cu(I)] + [Cu(II)]}/[I] = 1/100. The system then contained [Initiator]/[Cu(I)] = 1000/1 and [I]/[Cu(II)] = 1000/9. Under these conditions, the reaction reached 50% after 5 h with the polymer having both an Mn close to the theoretical value and a narrow polydispersity of PDi = 1.15. Optimum results were obtained by increasing the amount of catalyst. When a ratio of [Cu(I)]/[Cu(II)] = 10/90 with a ratio of [Cu]/[I] = 1/1, a conversion of 100% was achieved after less than 20 h, leading to a product having Mn = 8500 and PDi = 1.15. Decreasing the amount of Cu(II) relative to Cu(I) to [Cu(I)]/[Cu(II)] = 0.5/0.5 (maintaining the overall amount of copper) led to 100% conversion after 75 min: Mn = 9500, PDi = 1.10. Block copolymers have been demonstrated by sequential monomer addition with excellent control over Mn and PDi. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1696–1707, 2001 相似文献
3.
We report an electrospray ionization mass spectrometric study of Cu(I) and Cu(II) bipyridine complexes employed in atom transfer radical polymerization. Mass spectra of Cu(I)Br complexed with 2 equiv. of 4,4'-di(5-nonyl)-2,2'-bipyridine (dNbpy) in toluene, methyl acrylate or styrene showed the presence of [Cu(I)(dNbpy)(2)](+) cation and [Cu(I)Br(2)](-) anion. For the Cu(II)Br(2)/2dNbpy system, [Cu(II)(dNbpy)(2)Br](+), [Cu(II)(dNbpy)Br](+), [Cu(I)Br(2)](-), [Cu(II)Br(3)](-) and [Cu(II)(dNbpy)Br(3)](-) species were observed. In addition, for mixed Cu(I)Br/2dNbpy and Cu(II)Br(2)/2dNbpy systems, the negative ion mode showed only the presence of [Cu(I)Br(2)](-) anions, which are potentially formed through halogen exchange between [Cu(II)Br(3)](-) and [Cu(I)(dNbpy)(2)](+). Copyright 2000 John Wiley & Sons, Ltd. 相似文献
4.
Reaction of the known germylene Ge[N(SiMe3)2]2 and a new heterocyclic variant Ge[(NMes)2(CH)2] with [L(Me2)Cu]2 (L(Me2) = the beta-diketiminate derived from 2-(2,6-dimethylphenyl)amino-4-(2,6-dimethylphenyl)imino-2-pentene) yielded novel Cu(I)-Ge(II) complexes L(Me2)Cu-Ge[(NMes)2(CH)2] (1a) and L(Me2)Cu-Ge[N(SiMe3)2]2 (1b), which were characterized by spectroscopy and X-ray crystallography. The lability of the Cu(I)-Ge(II) bond in 1a and b was probed by studies of their reactivity with benzil, PPh3, and a N-heterocyclic carbene (NHC). Notably, both complexes are cleaved rapidly by PPh3 and the NHC to yield stable Cu(I) adducts (characterized by X-ray diffraction) and the free germylene. In addition, the complexes are highly reactive with O2 and exhibit chemistry which depends on the bound germylene. Thus, oxygenation of 1a results in scission and formation of thermally unstable L(Me2)CuO2, which subsequently decays to [(L(Me2)Cu)2(mu-O)2], while 1b yields L(Me2)Cu(mu-O)2Ge[N(SiMe3)2]2, a novel heterobimetallic intermediate having a [Cu(III)(mu-O)2Ge(IV)]3+ core. The isolation of the latter species by direct oxygenation of a Cu(I)-Ge(II) precursor represents a new route to heterobimetallic oxidants comprising copper. 相似文献
5.
Recep Ucan Umit Tunca Gurkan Hizal 《Journal of polymer science. Part A, Polymer chemistry》2003,41(13):2019-2025
The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003 相似文献
6.
The complexation between cupric ions (Cu(II)) and poly(gamma-glutamic acid) (gamma-PGA) in aqueous solutions (pH 3-11) has been studied by UV-visible absorption and electron spin resonance (ESR) techniques. Formation of the Cu(II)-gamma-PGA complex is confirmed by the observation of the blue shift of the absorption band in the visible region, anisotropic line shapes in the ESR spectrum at room temperature, and a computer simulation of the visible absorption spectrum of the complex. The structure of the Cu(II)-gamma-PGA complex, depending on the pH, has been determined. The in vitro insulin-mimetic activity of the Cu(II)-gamma-PGA complex is examined by determining both inhibition of free fatty acid release and glucose uptake in isolated rat adipocytes treated with epinephrine, in which the concentration of the Cu(II)-gamma-PGA complex for 50% inhibition of free fatty acid release is very similar to that of CuSO4. However, it is significantly lower than that of a previously reported insulin-mimetic bis(3-hydroxypicolinato)copper(II), [Cu(3hpic)2], complex. 相似文献
7.
Shigeru Tsuruya Kazutomo Okumoto Atkashi Yoshimatsu 《Journal of polymer science. Part A, Polymer chemistry》1978,16(2):379-389
The halogen displacement polymerization of 2,4,6-trihalophenol with heterogeneous basic copper(II) complex is described. The corresponding poly(dihalophenylene oxides) have been obtained from 2,4,6-trichloro-, 2,4,6-tribromo-, and 2,4,6-triiodophenol with the present catalytic system. In the halophenols used, the order of reactivity was as follows; 2,4,6-trichloro- < 2,4,6-tribromo- < 2,4,6-triiodophenol. With 2,4,6-trichlorophenol as a monomer, the 2,4,6-trichlorophenoxo–copper(II) complex, which had the composition Cu(OCH3)(C6H2Cl3O) and was considered to be a reaction intermediate, was isolated. The ESR spectrum of this complex at room temperature showed a sharp peak considered to be free organic radical, in addition to the broad one based on copper(II) ion. Poly(dichlorophenylene oxide) was obtained by thermal decomposition of the phenoxo–copper(II) complex. It was concluded that the formation and decomposition of the phenoxo–copper(II) complex were intermediate steps of halogen displacement polymerization of 2,4,6-trihalogenophenol with heterogeneous basic copper(II) catalyst. 相似文献
8.
Weihong Liu Frantiek Mike Yinzhong Guo Yasuhiro Koike Yoshi Okamoto 《Journal of polymer science. Part A, Polymer chemistry》2004,42(20):5180-5188
Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004 相似文献
9.
Guliashvili T Mendonça PV Serra AC Popov AV Coelho JF 《Chemistry (Weinheim an der Bergstrasse, Germany)》2012,18(15):4607-4612
The field of transition-metal-mediated controlled/"living" radical polymerization (CLRP) has become the subject of intense discussion regarding the mechanism of this widely-used and versatile process. Most mechanistic analyses (atom transfer radical polymerization (ATRP) vs. single-electron transfer living radical polymerization (SET-LRP)) have been based on model experiments, which cannot correctly mimic the true reaction conditions. We present, for the first time, a determination of the [Cu(I)Br]/[L] (L=nitrogen-based chelating ligand) ratio and the extent of Cu(I)Br/L disproportionation during CLRP of methyl acrylate (MA) in dimethylsulfoxide (DMSO) with Cu(0) wire as a transition-metal catalyst source. The results suggest that Cu(0) acts as a supplemental activator and reducing agent of Cu(II)Br(2)/L to Cu(I)Br/L. More importantly, the Cu(I)Br/L species seem to be responsible for the activation of SET-LRP. 相似文献
10.
Percec V Guliashvili T Ladislaw JS Wistrand A Stjerndahl A Sienkowska MJ Monteiro MJ Sahoo S 《Journal of the American Chemical Society》2006,128(43):14156-14165
Conventional metal-catalyzed organic radical reactions and living radical polymerizations (LRP) performed in nonpolar solvents, including atom-transfer radical polymerization (ATRP), proceed by an inner-sphere electron-transfer mechanism. One catalytic system frequently used in these polymerizations is based on Cu(I)X species and N-containing ligands. Here, it is reported that polar solvents such as H(2)O, alcohols, dipolar aprotic solvents, ethylene and propylene carbonate, and ionic liquids instantaneously disproportionate Cu(I)X into Cu(0) and Cu(II)X(2) species in the presence of a diversity of N-containing ligands. This disproportionation facilitates an ultrafast LRP in which the free radicals are generated by the nascent and extremely reactive Cu(0) atomic species, while their deactivation is mediated by the nascent Cu(II)X(2) species. Both steps proceed by a low activation energy outer-sphere single-electron-transfer (SET) mechanism. The resulting SET-LRP process is activated by a catalytic amount of the electron-donor Cu(0), Cu(2)Se, Cu(2)Te, Cu(2)S, or Cu(2)O species, not by Cu(I)X. This process provides, at room temperature and below, an ultrafast synthesis of ultrahigh molecular weight polymers from functional monomers containing electron-withdrawing groups such as acrylates, methacrylates, and vinyl chloride, initiated with alkyl halides, sulfonyl halides, and N-halides. 相似文献
11.
Kiyoshi Endo Takayuki Otsu 《Journal of polymer science. Part A, Polymer chemistry》1976,14(8):1889-1899
The polymerizations of 4-methyl-1-pentene(4M1P), 4-methyl-2-pentene (4M2P), 2-methyl-2-pentene (2M2P), and 2-methyl-1-pentene (2M1P) with Ziegler-Natta catalyst have been investigated. Both 4M1P and 4M2P were found to polymerize with TiCl3–(C2H5)Al catalyst to give high molecular weight poly(4M1P), while 2M2P and 2M1P did not give polymers with 4M1P units. However, when the polymerizations of 2M1P and 2M2P were carried out with ternary catalyst systems, TiCl3–(C2H5)AlCl–(PPh3)2PdCl2 and TiCl3–(C2H5)AlCl–Ni(SCN)2 polymers with 4M1P units were obtained in low yield. It was concluded that these four methylpentenes could polymerize with the monomer-isomerization polymerization mechanism to poly(4M1P). The results of the observed isomer distribution of methylpentenes recovered, and the rate of polymerization of four methylpentenes suggest that the isomerization from 2M1P to 4M1P with the above ternary catalyst systems might proceed via a direct one-step isomerization mechanism. 相似文献
12.
Poli R Stoffelbach F Maria S Mata J 《Chemistry (Weinheim an der Bergstrasse, Germany)》2005,11(8):2537-2548
Compound Al(OiPr)3 is shown to catalyze the halide-exchange process leading from [Mo(Cp)Cl2(iPrN=CH-CH=NiPr)] and CH3CH(X)COOEt (X=Br, I) to the mixed-halide complexes [Mo(Cp)ClX(iPrN=CH-CH=NiPr)]. On the other hand, no significant acceleration is observed for the related exchange between [MoX3(PMe3)3] (X=Cl, I) and PhCH(Br)CH3, by analogy to a previous report dealing with the Ru(II) complex [RuCl2(PPh3)3]. A DFT computation study, carried out on the model complexes [Mo(Cp)Cl2(PH3)2], [MoCl3(PH3)3], and [RuCl2(PH3)3], and on the model initiators CH3CH(Cl)COOCH3, CH3Cl, and CH3Br, reveals that the 16-electron Ru(II) complex is able to coordinate the organic halide RX in a slightly exothermic process to yield saturated, diamagnetic [RuCl2(PH3)3(RX)] adducts. The 15-electron [MoCl3(PH3)3] complex is equally capable of forming an adduct, that is, the 17-electron [MoCl3(PH3)3(CH3Cl)] complex with a spin doublet configuration, although the process is endothermic, because it requires an energetically costly electron-pairing process. The interaction between the 17-electron [Mo(Cp)Cl2(PH3)2] complex and CH3Cl, on the other hand, is repulsive and does not lead to a stable 19-electron adduct. The [RuCl2(PH3)3(CH3X)] system leads to an isomeric complex [RuClX(PH3)3(CH3Cl)] by internal nucleophilic substitution at the carbon atom. The transition state of this process for X=Cl (degenerate exchange) is located at lower energy than the transition state required for halogen-atom transfer leading to [RuCl3(PH3)3] and the free radical CH3. On the basis of these results, the uncatalyzed halide exchange is interpreted as the result of a competitive S(N)i process, whose feasibility depends on the electronic configuration of the transition-metal complex. The catalytic action of Al(OiPr)3 on atom-transfer radical polymerization (and on halide exchange for the 17-electron half-sandwich Mo(III) complex) results from a more favorable Lewis acid-base interaction with the oxidized metal complex, in which the transferred halogen atom is bound to a more electropositive element. This conclusion derives from DFT studies of the model [Al(OCH3)3]n (n=1,2,3,4) compounds, and on the interaction of Al(OCH3)3 with CH3Cl and with the [Mo(Cp)Cl3(PH3)2] and [RuCl3(PH3)3] complexes. 相似文献
13.
Kiyoshi Endo Hajime Tsujikawa Takayuki Otsu 《Journal of polymer science. Part A, Polymer chemistry》1986,24(7):1633-1642
5-Phenyl-2-pentene (5Ph2P) was found to undergo monomer-isomerization polymerization with TiCl3–R3Al (R = C2H5 or i-C4H9, Al/Ti > 2) catalysts to give a polymer consisting of exclusively 5-phenyl-1-pentene (5Ph1P) unit. The geometric and positional isomerizations of 5Ph2P to its terminal and other internal isomers were observed to occur during polymerization. The catalyst activity of alkylaluminum examined to TiCl3 was in the following order: (C2H5)3Al > (i-C4H9)3Al > (C2H5)2AlCl. The rate of monomer-isomerization polymerization of 5Ph2P with TiCl3–(C2H5)3Al catalyst was influenced by both the Al/Ti molar ratio and the addition of nickel acetylacetonate [Ni(acac)2], and the maximum rate was observed at Al/Ti = 2.0 and Ni/Ti = 0.4 in molar ratios. 相似文献
14.
《Journal of Coordination Chemistry》2012,65(4):479-489
A modified synthetic route for the complexes [Cu(II)5,7,12,14-tetramethyldinaphtho [b,i][1,4,8,11]tetraaza[14]annulene], [Cu(II)tmdnTAA], and [Cu(II) 5,7,12,14-tetramethyl-6,13-dichloro-dinaphtho[b,i][1,4,8,11]tetraaza[14]annulene], [Cu(II)dCltmdnTAA], is presented in this work. The electrochemical characterization of both complexes and their precursors, [bis(2,4-pentanedionato)copper(II)], [Cu(II)(acac)2] and [bis(3-chloro-2,4-pentanedionato)copper(II)], [Cu(II)(3-Cl-acac)2], respectively, under nitrogen and carbon dioxide is also presented. The voltammetric response of [Cu(II)(acac)2] and [Cu(II)(3-Cl-acac)2] are different compared to [Cu(II)tmdnTAA] and [Cu(II)dCltmdnTAA] under nitrogen. Precursors show the reduction of Cu(I) to Cu(0) and the tetraazadinaphtho[14]annulene complexes do not. The chlorine substituted complex has a lower reduction potential than the unsubstituted homologue under nitrogen atmosphere. However, the contrary response is obtained in the presence of carbon dioxide: the unsubstituted complex is more catalytic in terms of potential because the current discharge appears 270?mV shifted to the anodic region. These facts can be explained in terms of electronic and steric effects. The modified electrode obtained by oxidative electropolymerization of [Cu(II)tmdnTAA] over glassy carbon electrode presented a suitable amperometric response for the sulfite reduction in acidic medium (pH?=?2.7). A linear correlation was observed for the catalytic current and sulfite concentration between 0.6–6.0?mM range. 相似文献
15.
Kundu N Maity M Chatterjee PB Teat SJ Endo A Chaudhury M 《Journal of the American Chemical Society》2011,133(50):20104-20107
Valence tautomeric compounds involving nondixolene-type ligands are rare. The triple-helicate copper(II) complex [Cu(II)(2)(L)(3)](ClO(4))(4)·3CH(3)CN (1) containing a redox-active N-heterocyclic ligand (L) has been prepared and displays VT equilibrium in solution, as established by electronic spectroscopy, electron paramagnetic resonance spectroscopy, and cyclic and differential pulse voltammetry carried out at variable temperatures. The process involves intramolecular transfer of an electron from one of the L ligands to a copper(II) center, leading to the oxidation of L to an L(?+) radical with concomitant reduction of the Cu(II) center to Cu(I), as shown by the equilibrium [Cu(II)Cu(I)L(?+)L(2)](4+) ? [Cu(II)(2)L(3)](4+). 相似文献
16.
The various phenolic compounds in conjunction with Cu(II) or Cu(I)‐N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) complexes are used to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate, styrene, and methyl acrylate in the presence of a limited amount of air at temperatures in the range of 80–110 °C. Meanwhile, an effort is directed toward the elucidation of the role of phenol and derivatives in ATRP catalyzed by Cu(II)/PMDETA. The catalytic sequence involves the formation of Cu(I) by electron transfer from phenol to Cu(II); Cu(I) so formed can then react in two distinctly different ways: with organic halide to form a propagating radical or with oxygen to form copper salt in its higher oxidation state; and regeneration of Cu(I) by excess phenol. Such regeneration of Cu(I) would be expected to lead to polymerization as a result of the consumption of oxygen and phenol as well. The phenols with electron releasing groups tended to increase the conversion of the polymerization. In this respect, sodium phenoxide, a more effective additive was found, whereas p‐nitro phenol was the least effective. The obtained polymers displayed the common features of a controlled polymerization such as molecular weight control and low polydispersity index value (Mw/Mn < 1.5). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 351–359, 2004 相似文献
17.
Jong‐Bum Kim Wenxi Huang Matthew D. Miller Gregory L. Baker Merlin L. Bruening 《Journal of polymer science. Part A, Polymer chemistry》2003,41(3):386-394
Although atom transfer radical polymerization (ATRP) is often a controlled/living process, the growth rate of polymer films during surface‐initiated ATRP frequently decreases with time. This article investigates the mechanism behind the termination of film growth. Studies of methyl methacrylate and methyl acrylate polymerization with a Cu/tris[2‐(dimethylamino)ethyl]amine catalyst system show a constant but slow growth rate at low catalyst concentrations and rapid growth followed by early termination at higher catalyst concentrations. For a given polymerization time, there is, therefore, an optimum intermediate catalyst concentration for achieving maximum film thickness. Simulations of polymerization that consider activation, deactivation, and termination show trends similar to those of the experimental data, and the addition of Cu(II) to polymerization solutions results in a more constant rate of film growth by decreasing the concentration of radicals on the surface. Taken together, these studies suggest that at high concentrations of radicals, termination of polymerization by radical recombination limits film growth. Interestingly, stirring of polymerization solutions decreases film thickness in some cases, presumably because chain motion facilitates radical recombination. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 386–394, 2003 相似文献
18.
P. Elayaperumal T. Balakrishnan M. Santappa R. W. Lenz 《Journal of polymer science. Part A, Polymer chemistry》1980,18(8):2471-2479
The kinetics of redox -initiated polymerization of acrylic acid (AA) by the systerm Mn3+-isobutyric acid (IBA) in sulfuric acid was studied in the temperature range of 35–50°C. The overall rates of polymerization (Rp), disappearance of manganic ion (?Rm), and degree of polymerization (X n), were measured with variation in [monomer], [Mn3+], [IBA], H+, μ, [Mn2+], and temperature. The polymerization is initiated by the organic free radical that develops from the Mn3+-isobutyric acid oxidation reaction. Two types of termination reactions, one by the metal ion (Mn3+) and the other by the MN3+-isobutyric acid complex are proposed to explain the kinetic results. The various rate parameters were evaluated an discussed. 相似文献
19.
Electron paramagnetic resonance (EPR) spectroscopy was applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and methyl acrylate (MA) in order to investigate the mechanism of the controlled/“living” radical polymerization system. Although initially only copper(I) species was added to the system as a catalyst, EPR signals of copper(II) species were observed during the polymerization of MMA initiated by ethyl 2-bromoisobutyrate and p-methylbenzenesulfonyl chloride, and polymerization of MA initiated by methyl 2-bromopropionate. As the polymerization proceeded, the concentration of copper(II) increased gradually until a steady state was reached. The EPR results indicate that 5–6% of copper(I) species converted to copper(II) species in polymerization of MMA and about 3% in polymerization of MA at 90°C. 相似文献
20.
Siu CK Ke Y Guo Y Hopkinson AC Siu KW 《Physical chemistry chemical physics : PCCP》2008,10(38):5908-5918
The dissociations of two types of copper(II)-containing complexes of tryptophan (Trp), tyrosine (Tyr), or phenylalanine (Phe) are described. The first type is the bis-amino acid complex, [Cu(II)(M)(2)].(2+), where M = Trp, Tyr, or Phe; the second [Cu(II)(4Cl-tpy)(M)].(2+), where 4Cl-tpy is the tridendate ligand 4'-chloro-2,2':6',2'-terpyridine. Dissociations of the Cu(ii) bis-amino acid complexes produce abundant radical cation of the amino acid, M.(+), and/or its secondary products. By contrast, dissociations of the 4Cl-tpy-bearing ternary complexes give abundant M.(+) only for Trp. Density functional theory (DFT) calculations show that for Tyr and Phe, amino-acid displacement reactions by H(2)O and CH(3)OH (giving [Cu(II)(4Cl-tpy)(H(2)O)].(2+) and [Cu(II)(4Cl-tpy)(CH(3)OH)].(2+)) are energetically more favorable than dissociative electron transfer (giving M.(+) and [Cu(I)(4Cl-tpy)](+)). The fragmentation pathway common to all these [Cu(II)(4Cl-tpy)(M)].(2+) ions is the loss of NH(3). DFT calculations show that the loss of NH(3) proceeds via a "phenonium-type" intermediate. Dissociative electron transfer in [Cu(II)(4Cl-tpy)(M-NH(3))].(2+) results in [M-NH(3)].(+). The [Phe-NH(3)] (+) ion dissociates facilely by eliminating CO(2) and giving a metastable phenonium-type ion that rearranges readily into the styrene radical cation. 相似文献