„Ytterbiumdisulfid”︁: Eine Korrektur

?Ytterbiumdisulfide”?: A Correction The still open questions concerning preparation and crystal structure of ?Ytterbiumdisulfide”? could be answered now using new experimental results. The formerly investigated single crystals were not Yb^IIS₂ but BaS₂.     

Variation of tube diameter and film thickness of capillary columns

This paper briefly surveys three important considerations related to the tube diameter and film thickness. These are the interrelationship of these two parameters through the phase ratio, the different meanings of the term “efficiency”, and the influence of film thickness and tube diameter on sample capacity. Comparative examples are given for columns having different diameters and film thicknesses.     

Über „Orthoindate”︁ der Alkalimetalle: Zur Kenntnis von K5[InO4]

A New ?Orthoindate”? of an Alkali Metal: K₅[InO₄] Hitherto unknown K₅[InO₄] was prepared by heating intimate mixtures of K₂O, In₂O₃ and elementar In (molar ratio 10.0 : 1.0 : 4.0) in closed Ni-cylinders (30 days, 500°C) in form of pale red, nearly colourless, transparent, single crystals. Same crystals were obtained by heating mixtures of K₂O, CdO and elementar In (molar ratio 3.1 : 1.0 : 1.0) in closed Ag-cylinders (30 days, 450°C), too. In this case we also found yellow-brown crystals of K₁₄[In₄O₁₃] [1]. Structure determination by four circle diffractometer data (MoKα, 15279 out 17454 I_o(hkl), R = 5.60%, R_w = 5.25%). Space group P1 with a = 1827.9 pm; b = 1694.4 pm; c = 1329.4 pm; α = 113.3°; β = 111.4°; γ = 105.2°; Z = 16. Characteristic feature of the structure are isolated [InO₄]^5?-tetraeder. The Madelung Part of Lattice Energy, MAPLE, the Mean Fictive Ionic Radii, MEFIR, Effective Coordination Numbers, ECoN, and Charge Distribution, VADI, are calculated.     

The “disturbing zone” in overpressure layer chromatography (OPLC)

This paper describes the fundamental factors causing the “disturbing zone” in OPLC. This phenomenon of distorted substance zones appears when the OPLC separation is started with a dry layer and is due to interaction between the gas that is physically bound to the surface of the sorbent (m_a) and the gas molecules dissolved in the eluent (m_s). Possibilities for elimination of the adverse effects of disturbing zones ultimately depend on the establishment of operating conditions that inhibit their initial formation. Since modification of the location of the disturbing zone is only possible within a very narrow range, the sole solution to this problem is to conduct a pre-run, which may be carried out with hexane in the case of separation of apolar compounds. For separation of polar substances, the pre-run may also be performed with hexane or with a solvent of the mobile phase in which the components are unable to migrate. The selection of this solvent may be considered during the optimization of the eluent system.     

Application of the “cooled needle” technique to split and splitless sampling onto capillary columns

Cooled needle sampling using syringes was applied to splitless injection and to simulated distillation analyses. Slight changes of the construction of the previous device are also described. The changes concern the temperature profile within the injector and especially the vaporization insert. Even with the low carrier gas flow through the injector during splitless injection, discrimination by component volatility can be avoided. Precision and accuracy of simulated distillation data obtained with split sampling also can be improved by the cooled needle technique.     

A general framework for the measurement of band broadening properties of GC capillary columns

In the approach to the developement of a practical procedure for the evaluation of band broadening properties of gas capillary columns, the expression for the variance of a solute band is cast in a dimensionless form. This expression supplies the basis for a valid bench mark for column evaluation. Experimental results demonstrate the applicability of the method.     

“Sock-Ball” Chromatographic Separation of High Molecular Weight Fullerenes with Sock-Shaped Stationary Phase

A method for “Sock-Bail” chromatographic separation of high molecular weight fullerenes is described. A prepared sock-shaped stationary phase (Sock-SAF-phase) was used for HPLC separation of several polycyclic aromatic hydrocarbons (PAHs) and fullerenes. Fullerenes, as ball-shaped molecules, are much more strongly retained than PAHs on this stationary phase and have the eluted order C₅₀ < C₇₀ < C₇₆ < C₇₈ < C₈₄ in the mobile phase of n-hexane/dichloromethane (100/0 ～ 80/20). In contrast, chromatography on the corresponding unmodified silica phase or SC-3OH-phase (an intermediate phase of Sock-SAF-phase) gave no separation of fullerenes. This fact indicated that the separation of fullerenes on Sock-SAF-phase was related to the selective interaction with the sock moiety.     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.     

“Bicarburet of Hydrogen”. Reappraisal of the Discovery of Benzene in 1825 with the Analytical Methods of 1968

The historical background and the admirable analytical procedure that led Michael Faraday to the discovery of benzene in 1825 are discussed. Using modern techniques of instrumental analysis, the author retraces the isolation and analysis of benzene, and shows that the starting material used by Faraday must have been a very complex mixture of hydrocarbons, which would make severe demands even on present-day preparative analytical techniques, since it contains more than 300 components at concentrations greater than 100 ppm. The magnitude of the changes in analytical techniques can be seen from the fact that it is no longer necessary to isolate individual compounds, and that a great deal of information can be obtained with a much smaller quantity of material and in a much shorter time. Nevertheless, Faraday's persistence, experimental skill, and accuracy of measurement remain an example to the analyst of today.     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

“Assessing the RAFT Equilibrium Constant via Model Systems: An EPR Study”—Response to a Comment

We have presented an EPR‐based approach for deducing the RAFT equilibrium constant, K_eq, of a dithiobenzoate‐mediated system [Meiser, W. and Buback M. Macromol. Rapid Commun. 2011 , 32, 1490]. Our value is by four orders of magnitude below K_eq from ab initio calculations for the identical monomer‐free system. Junkers et al. [Macromol. Rapid Commun. 2011 , 32, 1891] claim that our EPR approach would be model dependent and our data could be equally well fitted by assuming slow addition of radicals to the RAFT agent and slow fragmentation of the so‐obtained intermediate radical as well as high cross‐termination rate. By identification of all side products, our EPR‐based method is shown to be model independent and to provide reliable K_eq values, which demonstrate the validity of the intermediate radical termination model.     

Gas chromatography of amino acids: Use of a fused-silica capillary column in the determination of plasma amino acids

A capillary chromatographic procedure using a fused silica column is described which can be used to quantitatively determine amino acids in plasma following the pre-chromatographic “clean-up” described in a recent paper [1]. In substituting this procedure for that involving a packed column, advantage has been taken of the greater resolving power to separate amino acids from background component peaks. In order to extend this advantage and provide a sound basis for quantitative analysis, the technique of cold on-column injection was employed. As a result, good precision of standard analysis was obtained with relative standard deviation (RSD) values for all amino acids of less than 4%. Application of the entire procedure to plasma samples yields RSD values of better than 10% for all amino acids with recoveries ranging from 72% to 104%. Simultaneous determination of plasma amino acid levels by gas chromatography (GC) using capillary columns and by classical ion exchange (CIE) showed reasonable agreement. Statistical evaluation showed no significant difference between twelve amino acids. Values for the remaining two, namely, phenylalanine and histidine are significantly different (p < 0.005). Comparison of the values obtained from GC capillary and packed columns reveals no significant difference between fourteen amino acids. Significant differences exist between results for phenylalanine and tyrosine (p < 0.001). It is concluded that there is good agreement between data obtained by GC capillary and CIE techniques and that differences between results for phenylalanine and histidine are method related.     

“Sock-Ball” Chromatographic Separation of Some Polycyclic Aromatic Hydrocarbons with C60-Fullerene Stationary Phase

Polycyclic aromatic hydrocarbons (PAHs) of different molecular shapes were tested and compared with a prepared C₆₀-fullerene-phase, and with the commercial Amino-phase or RP-18-phase in the mobile phase of methanol/dichloromethane (90/10 — 70/30) or n-hexane/dichloromethane (80/20). The chromatographic separation results indicate that C₆₀-fullerene-phase achieves the special selectivities and performances for the separation of PAHs. Based on the retention mechanism of “π-π” complex interaction or “Sock-Ball” shaped combination, PAHs undergo more pronounced interaction with C₆₀ ligand. For example, decacyclene, a sock-shaped PAH, the structure of which was calculated by means of semi-empirical molecular orbital methods, possesses stronger retention to give a “Sock-Ball” chromatographic separation with C₆₀-fullerene-phase. However, PAHs with bend, planar, or co-planar structures eluted on C₆₀-fullerene-phase undergo adsorption chromatography, but possess weaker retentions. The retention power of “Sock-Ball” chromatography can successfully recognize the different molecular shapes of PAHs.     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009