Poly(β-pinenes) carrying one,two, or three functional end groups. I. The effect of reaction conditions on the polymerization of β-pinene

β-Pinene was polymerized with H₂O/BCl₃ (protic) and p-dicumyl chloride and sym-tricumyl chloride (nonprotic) inifer systems in CH₂Cl₂ or CH₂Cl₂/n-C₆H₁₄ solvents from ?10 to ?70°C. The effect of solvent polarity, temperature, and monomer and inifer concentration on conversions and molecular weights was investigated. Low conversions and molecular weights, M?_n = 1300–2500, obtained under these conditions suggest rapid termination.     

Poly(4‐acryloylmorpholine) oligomers carrying a β‐cyclodextrin residue at one terminus

A straightforward synthesis of amphiphilic β‐cyclodextrin‐poly(4‐acryloylmorpholine) (β‐CD‐PACM) polymers of controlled molecular weight, consisting of the radical polymerization of 4‐acryloylmorpholine in the presence of 6‐deoxy‐6‐mercapto‐β‐cyclodextrin (β‐CD‐SH) as chain‐transfer agent, has been established. These derivatives carry a single β‐cyclodextrin (β‐CD) moiety at one terminus and their average molecular weight is in the order of 10⁴. Thus, their β‐CD content is ～ 10% by weight. No evidence of un‐functionalized PACM was found in the final products. The chain‐transfer constant (C_T) of β‐CD‐SH was found to be 1.30 by independently determining the reaction constants of both chain‐transfer and propagation reactions. This ensures that the molecular weight, hence the β‐CD content of the polymers, does not significantly vary with conversion. These β‐CD‐PACM polymers are highly soluble in water as well as in several organic solvents such as chloroform and lower alcohols. They proved capable of solubilizing in water poorly soluble drugs such as 9‐[(2‐hydroxyethoxy)methyl]guanine (Acyclovir) and of gradually releasing them in aqueous systems. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1607–1617, 2008     

Poly(γ‐glutamic acid) esters with reactive functional groups suitable for orthogonal conjugation strategies

We report on a series of novel poly(γ‐glutamic acid) (PGGA) esters, in which the chemical structure and composition, and the molecular weight are systematically changed. Modification of PGGA of microbial origin, used either as the sodium salt or in the free acid form, by means of alkylation with highly reactive bromides under S_N2 conditions, affords copolymers with an essentially random microstructure. These reaction conditions are applied iteratively to achieve full esterification, obtaining allyl or propargyl ester functionalities within the polymer backbone, diluted with inert functional groups, such as benzyl, ethyl, or hexyl ester functionalities. The copolymers have been characterized regarding their chemical structure and thermal and bulk properties using nuclear magnetic resonance, thermogravimetry, differential scanning calorimetry, and X‐ray diffraction techniques. We demonstrate that allyl and propargyl ester groups can be efficiently transformed using click chemistries, such as thiol‐ene or copper(I)‐catalyzed azide–alkyne cycloaddition reactions; such efficient conjugation strategies will be required to transform the native bacterial biopolymer into a material with tailored properties for bulk scale or biomedical applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(ε-caprolactone) modified by functional groups: Preparation and chemical–physical investigation

Functionalization of polymers is a particular relevant approach in the field of biodegradable polymers, where modifications are often required to allow these materials to replace more conventional, not biodegradable polymers in a wider range of applications. This article will report on functionalization of poly(ε-caprolactone) with unsaturated monomers bearing either anhydride groups (PCL-g-(MA-GMA)) or tertiary amines (PCL-g-DMAEA), obtained through radical grafting in a Brabender mixer. Crystallization kinetics parameters have been determined with several techniques (rheology, optical microscopy and differential scanning calorimetry) and the results obtained are in good agreement. It was observed that the crystallization rate significantly increases in the case of the modified polymers.     

Isomerization polymerization of β-propiolactones carrying side-chain ester groups

Based on our recent discovery of the isomerization polymerization of β-(2-acetoxyethyl)-β-propiolactone into poly-δ-ester,^1,2 we examined the generality of this phenomenon by using two related monomers. The catalysts were (EtAlO)_n and Et(ZnO)₂ZnEt. The side-chains in the monomers selected were the (CH₃)₂CHCOO? CH₂CH₂? (2) and (CH₃)CICHCOO? CH₂CH₂? (3) groups in which steric effects are almost identical but electronic effects are in opposition. The monomers yielded isomerized poly-δ-ester units, depending on the terminal substituent groups in the side-chain. These observations can be interpreted with the bicyclic intermediate proposed in the earlier work. Monomer (2) was reactive and produced a poly-δ-ester structure most readily, probably because of the higher electron density at the side-chain ester group which coordinated with the catalyst. In contrast, monomer (3) was less reactive, and the probability of isomerization was the lowest, i.e., the electron deficient side-chain ester group apparently interfered with the formation of the intermediate, especially in the Zn-catalysis. Equibinary random copolymers were prepared from (2) and (3) according to the catalyst and polymerization conditions chosen.     

Preparation of (S,S)‐Fmoc‐β2hIle‐OH, (S)‐Fmoc‐β2hMet‐OH,and (S)‐Fmoc‐β2hTyr(tBu)‐OH for Solid‐Phase Syntheses of β2‐ and β2/β3‐Peptides

The preparation of three new N‐Fmoc‐protected (Fmoc=[(9H‐fluoren‐9‐yl)methoxy]carbonyl) β²‐homoamino acids with proteinogenic side chains (from Ile, Tyr, and Met) is described, the key step being a diastereoselective amidomethylation of the corresponding Ti‐enolates of 3‐acyl‐4‐isopropyl‐5,5‐diphenyloxazolidin‐2‐ones with CbzNHCH₂OMe/TiCl₄ (Cbz=(benzyloxy)carbonyl) in yields of 60–70% and with diastereoselectivities of >90%. Removal of the chiral auxiliary with LiOH or NaOH gives the N‐Cbz‐protected β‐amino acids, which were subjected to an N‐Cbz/N‐Fmoc (Fmoc=[(9H‐fluoren‐9‐yl)methoxy]carbonyl) protective‐group exchange. The method is suitable for large‐scale preparation of Fmoc‐β²hXaa‐OH for solid‐phase syntheses of β‐peptides. The Fmoc‐amino acids and all compounds leading to them have been fully characterized by melting points, optical rotations, IR, ¹H‐ and ¹³C‐NMR, and mass spectra, as well as by elemental analyses.     

Poly(β-amino acid)s. IV. Synthesis and conformational properties of poly(α-isobutyl-L-aspartate)

Poly(α-isobutyl-L -aspartate) was prepared by the polycondensation reaction of p-nitrophenyl ester of α-isobutyl-L -aspartate and the conformation of the poly(β-amino acid) was investigated by X-ray diffraction, polarized infrared, circular dichroism (CD), optical rotatory dispersion (ORD), and NMR spectroscopy. α-Isobutyl β-p-nitrophenyl-L -aspartate hydrochloride and hydrobromide were used as monomers and dimethylformamide, chloroform, and chlorobenzene, as solvents. A high-molecular-weight polymer with [η] 1.0 dl/g (dichloroacetic acid, 25°C) was formed in the polymerization of the hydrochloride in chloroform at 25°C. The X-ray diagram and polarized infrared spectrum of the stretched polymer film obtained from a chloroform solution suggested a cross-β-form as the most probable structure in the solid state. The CD spectra of the polymer in a 2,2,2-trifluoroethanol (TFE) solution and its film cast from the solution showed a peak at 205 nm and a trough at 190 nm which were assigned to a β-structure. The polymer was associated in chloroform. The NMR and ORD spectra in chloroform were similar to those in TFE, which suggests that the polymer also exists in the β-structure in chloroform. The addition of small amounts of dichloroacetic acid and sulfuric acid to chloroform and TFE solutions, respectively, destroyed the β-structure. A random copolymer of α-isobutyl-L -aspartate with β-alanine was also prepared by polycondensation reaction. The copolymer apparently did not form an ordered structure in the solid state or in solution.     

Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

Syntheses,Structures, and Polymorphism of β‐Diketonato Complexes – Co(thd)3

Oxidation of Co(thd)₂ dissolved in different solvents has been investigated in air and oxygen atmosphere. In oxygen atmosphere and at the boiling point of the solvents this treatment leads to oxidation of Co^II to Co^III, but also to degradation of some of the thd ligands and formation of a new mixed‐ligand complex. Three pure‐cultivated crystalline Co(thd)₃ phases are reported: 1 (room‐temperature phase), 2 (low‐temperature phase), and 3 (metastable phase) and in addition there exists an amorphous Co(thd)₃ phase ( 4 ) with approximate composition Co(thd)₃·xH(thd); x = 0.06. Reaction of metal(II) oxides (MO, M = Mn, Fe, and Co) with H(thd) under air or O₂ atmosphere is an easy direct route to M(thd)₃ complexes. Structure determinations are reported for Co(thd)₃ ( 1 – 3 ) based on single‐crystal X‐ray diffraction data. Modification 1 crystallizes in space group with a = b = 18.8100(10), c = 18.815(2) Å at 295 K; R(wR2) = 0.180, modification 2 in space group C2/c with a = 28.007(12), b = 18.482(8), c = 21.356(9) Å, β = 97.999(5)° at 100 K; R(wR2) =0.211, and modification 3 in space group Pnma with a = 19.2394(15), b = 18.8795(15), c = 10.7808(8) Å at 100 K; R(wR2) = 0.193. The molecular structures of 1 – 3 all comprise a central Co atom octahedrally co‐ordinated by the ketonato O atoms of three thd ligands. The transformation between modifications 1 and 2 is of a fully reversible second‐order character. Modifications 1 and 3 are, on the other hand, related by a quasi‐reversible cycle. Heat treatment (specifically sublimation) of 1 leads to 3 whereas re‐crystallization or prolonged storage at room temperature is required to regenerate 1 . Co(thd)₃ has sufficient thermal stability to permit sublimation without degradation. The various forms of Co(thd)₃ are all diamagnetic, viz. a confirmation of the Co^III valence state.     

Hydrolytic degradation of poly(ε‐caprolactone) with different end groups and poly(ε‐caprolactone‐co‐γ‐butyrolactone): characterization and kinetics of hydrocortisone delivery

Asymmetric telechelic α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone) (HA‐PCL), α‐hydroxyl‐ω‐(benzylic ester)‐poly(ε‐caprolactone) (HBz‐PCL), and an asymmetric telechelic copolymer α‐hydroxyl‐ω‐(carboxylic acid)‐poly(ε‐caprolactone‐co‐γ‐butyrolactone) (HA‐PCB) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL). CL and CL/γ‐butyrolactone mixture were used to obtain homopolymers and copolymer respectively at 150°C and 2 hr using ammonium decamolybdate (NH₄) [Mo₁₀O₃₄] (Dec) as a catalyst. Water (HA‐PCL and HA‐PCB) or benzyl alcohol (HBz‐PCL) were used as initiators. The three polylactones reached initial molecular weights between 2000 and 3000 Da measured by proton nuclear magnetic resonance (¹H‐NMR). Compression‐molded polylactone caplets were allowed to degrade in 0.5 M aqueous p‐toluenesulfonic acid at 37°C and monitored up to 60 days for weight loss behavior. Data showed that the copolymer degraded faster than the PCL homopolymers, and that there was no difference in the weight loss behavior between HA‐PCL and HBz‐PCL. Caplets of the three polylactones containing 1% (w/w) hydrocortisone were placed in two different buffer systems, pH 5.0 with citrate buffer and pH 7.4 with phosphate buffer at 37°C, and monitored up to 50 days for their release behavior. The release profiles of hydrocortisone presented two stages. The introduction of a second monomer in the polymer chain significantly increased the release rate, the degradation rate for HA‐PCB being faster than those for HBz‐PCL and HA‐PCL. At the pH studied, only slight differences on the liberation profiles were observed. SEM micrographs indicate that hydrolytic degradation occurred mainly by a surface erosion mechanism. Copyright © 2009 John Wiley & Sons, Ltd.     

A revised assignment of the 13C NMR spectra of α- and β-pinenes

α-Pinene and β-pinene ¹³C enriched at the C-10 position were prepared by an unambiguous synthesis. ¹³C NMR spectral analysis provided evidence for a revised assignment for α-pinene at the C-9 and C-10 carbon atoms.     

Syntheses of stereodefined β-alkylidene-γ-lactones and substituted β, γ-unsaturated δ-lactones

1-Trimethylsilyl-1,3-diyne derived trans-bis(trimethylstannyl) enynes undergo stepwise transmetallation with methyllithium to furnish the corresponding enynyllithium reagents. The application, in various orders, of a sequence of transmetallation-protonation-alkylation-hydroxyalkylation-hydroboration-oxidation reactions provides a novel approach to stereo-defined β-alkylidene γ-lactones and β, γ-unsaturated δ-lactones.     

Superexchange in copper(II) Dimers. 3. Synthesis and characterization of binuclear adducts of copper(II) halides with some α,β-dione dioximes

Copper(II) halides, CuX₂ (X = Br^?, Cl^?), have been combined in non-aqueous medium with various α,-β-dione dioxime (α,β-dodoH) ligands to produce new 1:1 adducts, the di-μ-halo-bis[halo(α,β-dodoH)copper(II)] dimers. These are: Di-μ-bromo-bis[bromo(ethanedialdioxime)copper(II)]; di-μ-bromo-bis[bromo(diphenylethanedione dioxime)copper(II)]; di-μ-bromo-bis-[bromo(9,10phenanthrenedione dioxime)copper(II)]; di-μ-chloro-bis-[chloro(9,10-phenanthrenedione dioxime)copper(II)]. The materials were characterized by conventional methods. The results clearly indicate that the compounds crystallize in discrete dimers, quite consistent with the results of closely related dimers studied earlier.     

Syntheses and characterization of new (2S)-2-hydroxy-1,4-oxazin-3-ones derived from β-aminoalcohols

The reactions of methyl glyoxylate hemiacetal 1 with 2-(methylamino)ethanol 2 , (1R,2S)-(–)-ephedrine 3 and (1S,2S)-(+)-pseudoephedrine 4 provide the (2S)-2-hydroxy-1,4-oxazin-3-ones 2a , 3a , 4a in good yield. They were characterized by ¹H, ¹³C, NMR, and infrared and mass spectroscopy. The structures of 2a and 3a were established by X-ray diffraction. The configuration of C₂ (S) is demonstrated by ¹H NMR data and confirmed for compounds 2a and 3a by single-crystal X-ray diffraction studies. © John Wiley & Sons, Inc.     

Elementary reaction analysis of the radical polymerization of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups

The polymerizations of α‐ethyl β‐N‐(α′‐methylbenzyl)itaconamates carrying (RS)‐ and (S)‐α‐methylbenzylaminocarbonyl groups (RS‐EMBI and S‐EMBI) with dimethyl 2,2′‐azobisisobutyrate (MAIB) were studied in methanol (MeOH) and in benzene kinetically and with electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) at 60 °C was given by R_p = k[MAIB]^{0.58 ± 0.05}[RS‐EMBI]^{2.4 ± 0.l} and R_p = k[MAIB]^{0.61 ± 0.05}[S‐EMBI]^{2.3 ± 0.l} in MeOH and R_p = k[MAIB]^{0.54 ± 0.05}[RS‐EMBI]^{1.7 ± 0.l} in benzene. The rate constants of initiation (k_df), propagation (k_p), and termination (k_t) as elementary reactions were estimated by ESR, where k_d is the rate constant of MAIB decomposition and f is the initiator efficiency. The k_p values of RS‐EMBI (0.50–1.27 L/mol s) and S‐EMBI (0.42–1.32 L/mol s) in MeOH increased with increasing monomer concentrations, whereas the k_t values (0.20?7.78 × 10⁵ L/mol s for RS‐EMBI and 0.18?6.27 × 10⁵ L/mol s for S‐EMBI) decreased with increasing monomer concentrations. Such relations of R_p with k_p and k_t were responsible for the unusually high dependence of R_p on the monomer concentration. The activation energies of the elementary reactions were also determined from the values of k_df, k_p, and k_t at different temperatures. R_p and k_p of RS‐EMBI and S‐EMBI in benzene were considerably higher than those in MeOH. R_p of RS‐EMBI was somewhat higher than that of S‐EMBI in both MeOH and benzene. Such effects of the kinds of solvents and monomers on R_p were explicable in terms of the different monomer associations, as analyzed by ¹H NMR. The copolymerization of RS‐EMBI with styrene was examined at 60 °C in benzene. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1819–1830, 2003     

(η3-allyl)palladium(II) catalysts for the addition polymerization of norbornene derivatives with functional groups

Cycloaliphatic polyolefins with functional groups were prepared by the Pd(II)-catalyzed addition polymerization of norbornene derivatives. Homo- and copolymers containing repeating units based on bicyclo[2.2.1] hept-5-en-2-ylmethyl decanoate (endo/exo-ratio = 80/20), bicyclo[2.2.1]hept-5-ene-2-carboxylic acid methyl ester (exo/endo = 80/20), bicyclo[2.2.1]hept-5-ene-2-methanol (endo/exo = 80/20), and bicyclo[2.2.1]hept-5-ene-2-carboxylic acid (100% endo) were prepared in 49–99% yields with {(η³-allyl)Pd(BF₄)} and {(η³-allyl)Pd(SbF₆)} as catalysts. The catalyst containing the hexafluoroantimonate ion was slightly more active than the tetrafluoroborate based Pd-complex.     

Syntheses and reactions of functional polymers. XCVII. Chemical activation and functionalization of poly(γ-methyl-L-glutamate)

To enhance its solubility in common solvents poly(γ-methyl-L -glutamate) (PMG) was transesterificated with ethylene chlorohydrin, ethylene cyanohydrin, and β,β,β-trichloroethanol, respectively. The aminolyses of the resulting polymers proceeded easily in pendant ester groups to give the corresponding amides in reasonable yields without main chain fission. By these procedures the incorporation of functional groups such as azide, amino acid, and thiol into PMG is successfully performed.     

Structural Characterization and Enzymatic Degradation of α‐, β‐, and γ‐Crystalline Forms for Poly(β‐propiolactone)

A structural comparison of three different crystalline forms of poly(β‐propiolactone) (PPL) was carried out by wide‐angle X‐ray diffraction, Fourier‐transform infrared spectroscopy, and differential scanning calorimetry. The α‐form in a hot‐drawn and annealed film represents a 2₁ helix conformation. The β‐form in a cold‐drawn and annealed film represents a planar zigzag conformation. The γ‐form in an oriented sedimented mat of solution‐grown chain‐folded lamellar crystals also implies a planar zigzag conformation. The solution‐cast film depicts similar outlines with the γ‐form in lamellar crystals in all the experimental measurements, suggesting that the molecular chain in the solution‐cast film has a planar zigzag conformation. While elongation at break decreased, tensile strength and Young's modulus increased with an increase in the crystallinity, independent of the crystalline forms. The influence of the enzymatic degradation of these crystal structures has been investigated by using an extracellular PHB depolymerase purified from Ralstonia pickettii T1. The rate of degradation was in the order of β‐form > α‐form > solution‐cast (γ‐form) film, and the different surface morphologies after partial enzymatic degradation were observed in scanning electron micrographs. It is suggested that the crystal structure is one of the important factors for determining the rate of degradation together with crystallinity.

Enzymatic degradation profiles of poly(β‐propiolactone) films.