F-to-HF reactions. IX. Nonthermal complications for the CH4/C3F6/C2F6 moderated nuclear recoil system

Results are reported from moderated nuclear recoil ¹⁸F experiments with the CH₄/C₃F₆/C₂F₆ mixture system. At a 99.5% confidence level measurement precision of ±3.4%, non-thermal F-to-HF reactions are phenomenologically suppressed at C₂F₆ moderator concentrations in the range of 95.0–99.95 mol-%. Effectively equilibrium reaction conditions can be established in well-designed experiments of this type.     

Dissociative charge exchange of C3F6

Charge exchange of neutral C₃F₆ by a variety of atomic and molecular ions in the 1 to 25 eV range of collision energies is used to characterize the energies associated with formation of [C₃F₆]⁺˙. The internal energy of the nascent [C₃F₆]⁺˙ ion, assessed by observing the degree to which it fragments, increases with the recombination energy of the charge-exchange reagent. The existence of excited states of the reagent ions is identified from the fragmentation behaviour of [C₃F₆]⁺˙ in the cases of [CS₂]⁺˙, NO⁺, O₂⁺˙, [NH₃]⁺˙ and possibly [CH₄]⁺˙. In addition, the data confirm that the [C₃F₆]⁺˙ parent ion fragments from both the ground state and a long-lived isolated electronic state. The latter is populated by near-resonant charge transfer. Translational excitation contributes relatively little to internal excitation of the charge-exchanged product ion and even less in the case of the isolated state.     

Pentafluorphenyliod(III)-Verbindungen. 2. Fluor-Aryl Substitution an Iodtrifluorid: Synthese von Pentafluorphenylioddifluorid C6F5IF2 und Bis(pentafluorphenyl)iodonium Pentafluorphenylfluoroboraten [(C6F5)2I]+[(C6F5)nBF4−n]−

Pentafluorophenyliodine(III) Compounds. 2. Fluorine-Aryl Substitution Reactions on Iodinetrifluoride: Synthesis of Pentafluorophenyliodinedifluoride C₆F₅IF₂ and Bis(pentafluorophenyl)iodonium Pentafluorophenylfluoroborates[(C₆F₅)₂I]⁺[(C₆F₅)_nBF_4?n]^? Mono- and disubstitution can be achieved in the fluorine-aryl substitution reaction on the low-temperature phase IF₃ in CH₂Cl₂ at ?78°C depending on the aryl transfer reagent. With B(C₆F₅)₃ [(C₆F₅)₂I]⁺ [(C₆F₅)_nBF_4?n]^? (68% yield) and with Cd(C₆F₅)₂ C₆F₅IF₂ (97% yield) is obtained whereas with C₆F₅SiMe₃ no fluorine-aryl substitution takes place on IF₃ even under basic conditions (EtCN or F^? addition). At ?78°C in EtCN solution IF₃ does not disproportionate but attacks the solvent under formation of HF.     

Replacement of Trimethylamine in Trimethylamine‐trispentafluoroethyl‐borane. Structures of [(C2F5)3BNMe3], [NMe4][(C2F5)3BOH], and K[(C2F5)3BCH2(CO)C6H5]

Trimethylamine‐tris(pentafluoroethyl)borane [(C₂F₅)₃BNMe₃] ( 1 ) reacts at 190 °C with water under displacement of the trimethylamine ligand to yield the hydroxy‐tris(pentafluoroethyl)borate [(C₂F₅)₃BOH]^? ( 2 ). In tributylamine 1 reacts with alkynes HC≡CR to form novel ethynyl‐tris(pentafluoroethyl)borate anions [(C₂F₅)₃BC≡CR]^? – R = C₆H₅ ( 3 ), C₆H₄CH₃ ( 4 ), Si(CH(CH₃)₂)₃ ( 5 ) – in moderate yields. Compound 3 adds water across the triple bond to form the novel anion [(C₂F₅)₃BCH₂(CO)C₆H₅]^? ( 6 ). The structures of [(C₂F₅)₃BNMe₃], [NMe₄][(C₂F₅)₃BOH] and K[(C₂F₅)₃BCH₂(CO)C₆H₅] have been determined by x‐ray crystallography.     

Reactions of Pentafluorobenzenesulfanylamines (C6F5S)nNH3–n,n = 1, 2, 3 and the Structure of (C6F5S)3N

The crystal structure of (C₆F₅S)₃N has been examined. The compounds (C₆F₅S)₂NX, X = SiMe₃ and ½ Hg have been prepared from (C₆F₅S)₂NH and characterised. In a number of other reactions, such as oxidation and irradiation, the S? N bond in (C₆F₅S)₂NH was readily fractured, forming the disulfide, (C₆F₅S)₂. The compound (C₆F₅S)₃N has been found to be unreactive. Details of the mass and ¹³C NMR spectra of (C₆F₅S)_nNH_3–n, n = 1, 2, 3 are reported.     

Silver(I) Compounds with Perfluorinated Aromatic Thiols C6F5C6F4SH,C10F7SH,and C6F5SH as Precursors for Silver Nanoparticles

Silver(I) compounds with perfluorinated aromatic thiols (4-nonafluorodiphenylthiol C₆F₅C₆F₄SH (HL¹), 2-heptafluoronaphthalenethiol C₁₀F₇SH (HL²), and pentafluorothiophenol C₆F₅SH (HL³), namely AgL¹ (I), AgL² (II), AgL³ (III), were prepared. The thermal properties of compounds I–III and the composition of thermolysis products were studied. By powder X-ray diffraction and electron microscopy, it was shown that thermolysis of compounds I–III under argon and thermolysis of compound III in air yield Ag nanoparticles.     

Neue Synthesen und Kristallstrukturen von Bis(fluorphenyl)quecksilber,Hg(Rf)2 (Rf = C6F5, 2, 3, 4, 6‐F4C6H, 2, 3, 5, 6‐F4C6H, 2, 4, 6‐F3C6H2, 2, 6‐F2C6H3)

New Syntheses and Crystal Structures of Bis(fluorophenyl) Mercury, Hg(R_f)₂ (R_f = C₆F₅, 2, 3, 4, 6‐F₄C₆H, 2, 3, 5, 6‐F₄C₆H, 2, 4, 6‐F₃C₆H₂, 2, 6‐F₂C₆H₃) Bis(fluorophenyl) mercury compounds, Hg(R_f)₂ (R_f = C₆F₅, C₆HF₄, C₆H₂F₃, C₆H₃F₂), are prepared in good yields by the reactions of HgF₂ with Me₃SiR_f. The crystal structures of Hg(2, 3, 4, 6‐F₄C₆H)₂ (monoclinic, P2₁/n), Hg(2, 3, 5, 6‐F₄C₆H)₂ (monoclinic, C2/m), Hg(2, 4, 6‐F₃C₆H₂)₂ (monoclinic, P2₁/c) and Hg(2, 6‐F₂C₆H₃)₂ (triclinic, P1) are described.     

19F NMR Investigations of the Reaction of B(C6F5)3 with Different Tri(alkyl)aluminum Compounds

Tris(pentafluorophenyl)borane, B(C₆F₅)₃ reacts with triethylaluminum, AlEt₃ to a mixture of Al(C₆F₅)_3−nEt_n and Al₂(C₆F₅)_6−nEt_n compounds depending on the B/Al ratio. From excess borane to excess AlEt₃ the species Al(C₆F₅)₃ → Al(C₆F₅)₂Et Al₂(C₆F₅)₄Et₂ → Al₂(C₆F₅)₃Et₃ → Al₂(C₆F₅)₂Et₄ → Al₂(C₆F₅)Et₅ are formed and differentiated by their para-F signal in ¹⁹F NMR. The reaction between B(C₆F₅)₃ and the higher aluminum alkyls, tri(iso-butyl)aluminum and tri(n-hexyl)aluminum AlR₃ (R = i-Bu, n-C₆H₁₃) is slower and requires AlR₃ excess to shift the C₆F₅ R exchange equilibria to almost complete formation of Al(C₆F₅)R₂ and BR₃. At equimolar ratio the equilibrium lies on the side of the unchanged borane together with its boranate [B(C₆F₅)₃R]⁻ anion. For tri(n-octyl)aluminum even at large Al(n-C₈H₁₇)₃ excess no C₆F₅ alkyl exchange can be observed, but boranate anions form.     

ESR studies on the structure of C6F−6 anions

Rigid solution spectra for C₆F^?₆ and C₄F^?₈ are compared, and it is concluded that C₆F^]t-₆ cannot have the planar, σ^* structure previously postulated. Instead, a puckered-ring structure with σ and pseudo π delocalisation is postulated.     

Adducts of (C6F5)3B with Selected Nitrogen

The Lewis acid (C₆F₅)₃B was reacted with ICN, NH₂CN, C₃N₃X₃ (X = H, Cl, F). The resulting Lewis acid base adducts ( 1—5 ) were fully characterized by analytic and spectroscopic methods. Additionally, the structures of the adducts 1—4 were determined by single crystal X‐ray analyses. It has been qualitatively shown, that a high field shift of the ¹¹B as well as the ¹⁹F NMR resonances of the o‐F atoms of the C₆F₅‐substituents suggests a longer B—N distance.     

B(C6F5)3/Chiral Phosphoric Acid Catalyzed Ketimine–Ene Reaction of 2-Aryl-3H-indol-3-ones and α-Methylstyrenes

The enantioselective ketimine–ene reaction is one of the most challenging stereocontrolled reaction types in organic synthesis. In this work, catalytic enantioselective ketimine–ene reactions of 2-aryl-3H-indol-3-ones with α-methylstyrenes were achieved by utilizing a B(C₆F₅)₃/chiral phosphoric acid (CPA) catalyst. These ketimine–ene reactions proceed well with low catalyst loading (B(C₆F₅)₃/CPA=2 mol %/2 mol %) under mild conditions, providing rapid and facile access to a series of functionalized 2-allyl-indolin-3-ones with very good reactivity (up to 99 % yield) and excellent enantioselectivity (up to 99 % ee). Theoretical calculations reveal that enhancement of the acidity of the chiral phosphoric acid by B(C₆F₅)₃ significantly reduces the activation free energy barrier. Furthermore, collective favorable hydrogen-bonding interactions, especially the enhanced N−H⋅⋅⋅O hydrogen-bonding interaction, differentiates the free energy of the transition states of CPA and B(C₆F₅)₃/CPA, thereby inducing the improvement of stereoselectivity.     

Multiple photon induced chemistry in mixtures of C2F6 with H2 or C6H14

CO₂ laser induced chemistry is demonstrated to occur efficiently in mixtures of C₂F₆ with H₂ or C₆H₁₄ at a fluence of 6 J/cm² and for a 30 cm^-1 red-shift from the C₂F₆ absorption maximum. H₂ or C₆H₁₄ pressure may be used to control the distribution of product species.     

Syntheses and Properties of Tetrakis(pentafluorophenyl)tellurium,Te(C6F5)4, and Related Compounds — Single Crystal Structures of Tris(pentafluorophenyl)tellurium Bromide,Te(C6F5)3Br,Tris(pentafluorophenyl)tellurium Trifluoromethanesulfonate, [Te(C6F5)3][OSO2CF3], and Bis(pentafluorophenyl)tellurium Oxide,Te(C6F5)2O

Te(C₆F₅)₄ was prepared from the reactions of TeCl₄ or Te(C₆F₅)₂Cl₂ with Grignard reagents or AgC₆F₅ in moderate to good yields. Substitution reactions with Me₃SiX (X = Cl, Br, OSO₂CF₃), with equimolar amounts of Br₂, with AgNO₃ and with H[BF₄] or BF₃·OEt₂ yielded the Te(C₆F₅)₃X derivatives (X = Cl, Br, OSO₂CF₃, NO₃, BF₄). Oxidation reactions of Cd, Hg, and Pd⁰ complexes led to Te(C₆F₅)₂ and the corresponding bis(pentafluorophenyl) derivatives M(C₆F₅)₂ (M = Cd, Hg, Pd) and with InBr to In(C₆F₅)₂Br. From very slow hydrolysis of Te(C₆F₅)₄ the oxide Te(C₆F₅)₂O was prepared. The thermal decomposition, the NMR and mass spectra of the partially new compounds are discussed. The crystal structures of Te(C₆F₅)₃Br (monoclinic, P2₁/a, Z = 4), [Te(C₆F₅)₃][OSO₂CF₃] (monoclinic, P2₁/n, Z = 16) and [Te(C₆F₅)₂O]₂ (triclinic, P1¯, Z = 2) were determined.     

Dihalogen(pentafluorphenyl)sulfonium(IV)-hexafluoroarsenat C6F5SX2+AsF6− (X = Cl,Br) und Kristallstruktur von Di(pentafluorphenyl)sulfan (C6F5)2S

Dihalogen(Pentafluorophenyl)sulfonium(IV) Hexafluoroarsenate C₆F₅SX₂⁺AsF₆^? (X = Cl, Br) and Crystal Structure of Di(pentafluorophenyl)sulfane (C₆F₅)₂S The preparation and spectroscopic characterisation of the halogensulfonium salts C₆F₅SCl₂⁺AsF₆^? and C₆F₅SBr₂⁺AsF₆^? is reported. The new salts are much more stable than their trifluoromethyl derivatives. In addition the crystal structure of (C₆F₅)₂S is reported. Space group P4₃2₁2, Z = 4, 478 unique observed diffractometer data, R_int. = 0.07, lattice constants: a = 569.0(5) pm, c = 3785.8(22) pm, V = 1225 times; 10^?30 m³.     

Syntheses and Characterization of (C2F5)3BCO and (C3F7)3BCO

The new tris(perfluoroalkyl)borane carbonyls, (C₂F₅)₃BCO and (C₃F₇)₃BCO, were prepared by means of a novel synthetic route using commercially available precursors by reacting K[(C₂F₅)₃BCOOH] and K[(C₃F₇)₃BCOOH] with concentrated sulfuric acid in the last step. The carboxylic acids, K[(C₂F₅)₃BCOOH] and K[(C₃F₇)₃BCOOH], were prepared by oxidative cleavage of the C?C triple bonds in Cs[(C₂F₅)₃BC?CPh] and Cs[(C₃F₇)₃BC?CPh] in a two‐step process to yield K[(C₂F₅)₃BCO? COPh] and K[(C₃F₇)₃BCO? COPh] as isolable intermediates. Crystal structures were obtained of K[(C₂F₅)₃BCO? COPh], K[(C₂F₅)₃BCOOH] ? H₂O, (C₂F₅)₃BCO, K[(C₃F₇)₃BCOOH] ? 2 H₂O, and (C₃F₇)₃BCO. In the crystal structures of (C₂F₅)₃BCO and (C₃F₇)₃BCO the C?O bond lengths are 1.109(2) and 1.103(5) Å, respectively, which are among the shortest observed to date. Tris(pentafluoroethyl)borane carbonyl and (C₃F₇)₃BCO slowly decompose at room temperature to yield CO, difluoroperfluoroalkylboranes and perfluoroalkenes. The decomposition of (C₂F₅)₃BCO was found to follow a first‐order rate law with E_a=107 kJ mol^?1.     

The reaction of C3F6 with dioxygen under IR laser initiation

The mechanism of oxidation of C₃F₆ by molecular O₂ under IR multiphoton excitation was studied. The activation energy of C₃F₆ oxidation was estimated from the dependence of the reagent conversion on the O₂ pressure. The data obtained for the final reaction products, CF₃CFO and CF₂O, suggest the dioxetane mechanism of C₃F₆ oxidation. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 45–49, January, 1999.     

[(C6F5)2IF2][BF4], the First Salt with the Electrophilic Cation [(C6F5)2IF2]+: Synthesis,Reactivity, and Structure

The substitution of hypervalently bonded fluorine atoms in C₆F₅IF₄ was performed with C₆F₅BF₂ and resulted in the new salt [(C₆F₅)₂IF₂][BF₄]. The iodonium(V) salt was characterized by multi‐NMR and Raman spectroscopy and X‐ray crystal structure analysis. The fluorinating ability of the new electrophilic cation [(C₆F₅)₂IF₂]⁺ was exemplified in reactions with monovalent iodine compounds (C₆F₅I, p‐FC₆H₄I, and I₂) and with electron‐poor tri(organyl)pnictanes ER₃ (E = P, As, Sb, Bi; R = C₆F₅). In a heterogeneous reaction with CsF in MeCN the [(C₆F₅)₂IF₂]⁺ cation forms the dinuclear [{(C₆F₅)₂IF₂}₂F]⁺ cation.     

The B(C6F5)3 Boron Lewis Acid Route to Arene‐Annulated Pentalenes

4,5‐Dimethyl‐1,2‐bis(1‐naphthylethynyl)benzene ( 12 ) undergoes a rapid multiple ring‐closure reaction upon treatment with the strong boron Lewis acid B(C₆F₅)₃ to yield the multiply annulated, planar conjugated π‐system 13 (50 % yield). In the course of this reaction, a C₆F₅ group was transferred from boron to carbon. Treatment of 12 with CH₃B(C₆F₅)₂ proceeded similarly, giving a mixture of 13 (C₆F₅‐transfer) and the product 15 , which was formed by CH₃‐group transfer. 1,2‐Bis(phenylethynyl)benzene ( 8 a ) reacts similarly with CH₃B(C₆F₅)₂ to yield a mixture of the respective C₆F₅‐ and CH₃‐substituted dibenzopentalenes 10 a and 16 . The reaction is thought to proceed through zwitterionic intermediates that exhibit vinyl cation reactivities. Some B(C₆F₅)₃‐substituted species ( 26 , 27 ) consequently formed by in situ deprotonation upon treatment of the respective 1,2‐bis(alkynyl)benzene starting materials ( 24 , 8 ) with the frustrated Lewis pair B(C₆F₅)₃/P(o‐tolyl)₃. The overall formation of the C₆F₅‐substituted products formally require HB(C₆F₅)₂ cleavage in an intermediate dehydroboration step. This was confirmed in the reaction of a thienylethynyl‐containing starting material 21 with B(C₆F₅)₃, which gave the respective annulated pentalene product 23 that had the HB(C₆F₅)₂ moiety 1,4‐added to its thiophene ring. Compounds 12 – 14 , 23 , and 26 were characterized by X‐ray diffraction.     

Determination of D[C6F5-I] by the toluene carrier method

The pyrolysis of C₆F₅I has been studied by the toluene carrier method over the temperature range of 900–978°K with contact times of 0.4–2.0 seconds and total pressures of 11.2–19.5 torr. Percent decomposition ranged from 8.6 to 97.7%. With toluene-to-C₆F₅I molar ratios of greater than 150, 85–100% of the C₆F₅ released abstracts a hydrogen atom from toluene to produce C₆F₅H. No significant quantities of I₂ were observed and the only major gaseous product was HI. Within the limits of the experimental method the decomposition of C₆F₅I was first order and homogeneous. Least squares analysis of log k₁ and 10³/T(C₆F₅I → C₆F₅ + I) values gives while a weighted line of best fit yields. Based on this latter equation D[C₆F₅? I] at 298°K is estimated as 66.2 kcal/mole.     

Struktur des Diaza-diphosphetidins, [(C6F5)F2P?NCH3]2

Structure of Diaza-diphosphetidin, [(C₆F₅)F₂P? NCH₃]₂ The synthesis, n. m. r. spectra and crystal structure of the diaza-diphosphetidin, [(C₆F₅)F₂P? NCH₃]₂, are reported.