Long branching in poly(vinyl acetate) and poly(vinyl alcohol). III. Kinetic study of the branching reaction in the radical polymerization of vinyl acetate

The branching reaction in the radical polymerization of vinyl acetate was studied kinetically. Branching occurs by polymer transfer as well as terminal double-bond copolymerization. The chain-transfer constants to the main chain (C_p,2) and to the acetoxy methyl group (C_p,1) on the polymer were calculated on the basis of the experimental data described in the preceding paper giving C_p,2 = 3.03 × 10^?4, C_p,1 = 1.27 × 10^?4 at 60°C, and C_p,2 = 2.48 × 10^?4, C_p,1 = 0.52 × 10^?4 at 0°C. Chain transfer to monomer is important with respect to the formation of the terminal double bond. The total values of transfer constants to the α- or β-position in the vinyl group and the acetoxymethyl group in vinyl acetate was determined to be 2.15 × 10^?4 at 60°C. The transfer constant to the acetyl group in the monomer (C_m,1) was also evaluated to be 2.26 × 10^?4 at 60°C from the quantitative determination of the carboxyl terminals in PVA. These facts suggest that the chain-transfer constant to the α- or β-position in the monomer (C_m,2) is nearly equal to zero within experimental error. Copolymerization reactivity parameters of the terminal double bond were also estimated. In conclusion, it has become clear that the formation of nonhydrolyzable branching by the terminal double-bond reaction can be almost neglected, and hence that the long branching in PVA is formed only by the polymer transfer mechanism. On the other hand, a large number of hydrolyzable branches in PVAc are prepared by the terminal double-bond reaction rather than by polymer transfer.     

On the formation of iron(III) hydroxo acetate complexes

The formation of hydroxo acetate complexes of iron (III) ion has been studied at 25 degrees C in 3 M (Na)ClO4 ionic medium by measuring with a glass electrode the hydrogen ion concentration in Fe(ClO4)3-HClO4-NaAc mixtures (Ac = acetate ion). The acetate/metal ratio ranged from 0 to 6, the metal concentration varied from 0.005 to 0.06 M, whereas [H+] was stepwise decreased from 0.1 M to initial precipitation of hydroxo-acetates. This occurred, depending on the acetate/metal ratio, in the -log[H+] range 1.85-2.7. The potentiometric data are consistent with the presence of Fe3(OH)3Ac3(3+), Fe2(OH)2(4+), Fe3(OH)4(5+), Fe3(OH)5(4+) and, as minor species, of Fe3(OH)2Ac6+, FeAc2+, FeAc2+, FeOH2+ and Fe(OH)2+. Previously published EMF measurements with redox and glass half-cells were recalculated to refine the stability constants of FeAc2+, FeAc2+ and Fe3(OH)2Ac6+. Formation constants *beta pqr for pFe(3+)+(q-r)H2O + rHAc reversible Fep(OH)(q-r)(Ac)r3p-q + qH+ (in parenthesis the infinite dilution value): log*beta 111 = -1.85 +/- 0.02 (-0.67 +/- 0.15), log*beta 122 = -3.43 +/- 0.02 (-1.45 +/- 0.15); log*beta 363 = -5.66 +/- 0.03 (-2.85 +/- 0.40), log*beta 386 = -8.016 +/- 0.006 (-4.06 +/- 0.15), log*beta 220 = -2.88 +/- 0.02 (-2.84 +/- 0.05), log*beta 340 = -6.14 +/- 0.18 (-6.9 +/- 0.4), log*beta 350 = -8.44 +/- 0.09 (-7.65 +/- 0.15).     

Photodegradation of poly(vinyl acetate)

Poly(vinyl acetate) (PVAc) films with different molecular masses were exposed to ultraviolet radiation. The infra-red spectra of all the samples showed a continuous attenuation of the intensity of the carbonyl stretching bands (1740 cm⁻¹) and of the symmetrical methyl bending vibration bands (1375 cm⁻¹), which suggests a steady loss of acetate side groups during irradiation.The electronic spectra showed an increase in the uv absorption at about 272 nm, suggesting the occurrence of polyene sequences in the polymer chains.In the low molecular mass sample there was almost no insoluble gel fraction formed, even after 20 h irradiation; in the high molecular mass polymer there was already a 50% insoluble fraction after 5 h irradiation, indicating a high degree of crosslinking, although the average viscometric molecular mass of the soluble fraction was only about one sixth of the initial value.     

Study of the miscibility of poly(vinyl pyridines) with poly(vinyl acetate), poly(vinyl alcohol) and their copolymers

Miscibility of poly(4-vinyl pyridine) (P4VP) and poly(2-vinyl pyridine) (P2VP) with poly(viny acetate) (PVAc), poly(vinyl alcohol) PVA and poly(vinyl acetate-co-alcohol) (ACA copolymers) has been investigated over a wide composition range. Differentiaal scanning calorimetry (DSC) results indicate that P2VP is immiscible with PVAC, PVA, and their copolymers over the whole composition range. In turn, P4VP appears to be immiscible with PVAC and PVA, but miscible with some ACA copolymers in certain range of composition. The P4VP-ACA phase diagram for different copolymer compositions has been determined. The variation of the glass transition temperature with composition for miscible mixtures was found to follow the Gordon-Taylor equation, with the parameter κ dependent upon copolymer composition. FTIR analysis of blends reveal the existence of specific interactions via hydrogen bonding between hydroxyl groups and the nitrogen of the pyridinic ring, which appear to be decisive for miscibility. © 1994 John Wiley & Sons, Inc.     

Interaction of water in polymers: Poly(ethylene‐co‐vinyl acetate) and poly(vinyl acetate)

We studied the interaction of water in poly(ethylene‐co‐vinyl acetate) of various vinyl acetate compositions and poly(vinyl acetate), on the basis of the infrared spectrum of the water dissolved therein. The spectrum shows a very sharp and distinct band at about 3690 cm^?1 (named as A), and less‐sharp two bands around 3640 (B) and 3550 cm^?1 (C), the A band being outstanding especially at a low vinyl acetate composition. As the vinyl acetate composition increases, the A band decreases in intensity relative to the C band, whereas the B band increases contrarily. Analysis of the spectral change has elucidated that one‐bonded water (of which one OH is hydrogen‐bonded to the C?O of an ester group and the other OH is free) and two‐bonded water (each OH of which is hydrogen‐bonded to one C?O) coexist in the copolymer and that two‐bonded water increases in relative population with increasing vinyl acetate composition. Dissolved water is entirely two‐bonded in poly(vinyl acetate), in which C?O groups are densely distributed in the matrix. We proved that dissolved water in polymers is hydrogen‐bonded through one or two OH groups to the possessed functional groups but does not cluster. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 777–785, 2005     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). I. Crosslinking and crosslinking cleavage of poly(vinyl acetate)

A crosslinked network was formed by the reaction of partially saponified poly(vinyl acetate) and toluylene diisocyanate in benzene. The yield of gel was markedly dependent on the degree of saponification and the concentrations of polymer and diisocyanate. Crosslinked poly(vinyl alcohol) was obtained by treating the poly(vinyl acetate) with a catalytic amount of sodium hydroxide in methanol without any change of the urethane crosslinks. The crosslink based on the urethane linkage was quantitatively cleaved by acids, especially by hydrobromic acid, releasing polymers of the same molecular weight as the original.     

Mechanical properties of blends of PAMAM dendrimers with poly(vinyl chloride) and poly(vinyl acetate)

Hybrid blends of poly(amidoamine) PAMAM dendrimers with two linear high polymers, poly(vinyl chloride), PVC, and poly(vinyl acetate), PVAc, are reported. The interaction between the blend components was studied using dynamic mechanical analysis, xenon nuclear magnetic resonance (NMR) spectroscopy, and tensile property measurements. The data suggest a much higher degree of interaction between components of PVAc-containing blends compared to those containing PVC. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2111–2117, 1998     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). IV. Polymerization of vinyl trimethylacetate in the presence of crosslinked poly(vinyl acetate)

In order to clarify the grafting behavior of vinyl trimethylacetate (VTMAc) onto poly-(vinyl acetate) (PVAc), the polymerization of a radioactive VTMAc in the presence of a crosslinked PVAc gel was studied in accordance with the experimental technique described in the previous papers. It was found that, at 60°C, the grafting onto the main chain of PVAc takes place about 2.8 times as readily as that onto the acetyl side group on PVAc.     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). II. Polymerization of vinyl acetate in the presence of crosslinked poly(vinyl alcohol)

It is a common view that poly(vinyl acetate) has many branches at the acetyl side group, but that the corresponding poly(vinyl alcohol) has little branching. In order to study the branching in poly(vinyl acetate) and poly(vinyl alcohol) which is formed by chain transfer to polymer, the polymerization of ¹⁴C-labeled vinyl acetate in the presence of crosslinked poly(vinyl acetate), which was able to be decrosslinked to give soluble polymers, was investigated at 60°C and 0°C. This system made it possible to separate as well as to distinguish the graft polymer from the newly polymerized homopolymer. Furthermore, the degree of grafting onto the acetoxymethyl group and onto the main chain were estimated. It became clear that, in the polymerization of vinyl acetate, chain transfer to the polymer main chain takes place about 2.4 times as frequently at 60°C as that to the acetoxy group and about 4.8 times as frequently at 0°C.     

Seeded polymerization of vinyl acetate using monodisperse poly(vinyl acetate) latex particles

The seeded polymerizations of vinyl acetate, using monodisperse poly(vinyl acetate) latex particles prepared in the absence of emulsifiers with potassium persulfate, have been investigated at 70°C with potassium persulfate as an initiator. New small particles were formed in the system containing a small amount of seed particles, but were not observed in the system containing a large amount of seed particles. The size of the secondary particles increased, and their number decreased, with an increase in the seed particle number. The minimum diameter of PVAc particles, which are stabilized by the sulfate ion groups bound at the end of polymer chains during polymerization, was determined to be 0.12 μm diameter from the limiting total surface area of seed particles which prevented further secondary nucleation. The minimum diameter of the particles increased as the speed of the stirrer increased. The new small particle number calculated using this value agreed well with that formed in the seeded polymerization.     

Structural relaxation in poly(vinyl acetate)

Structural relaxation in poly(vinyl acetate) (PVAc) in and slightly above the glass-transition region has been studied by monitoring the time dependence of enthalpy using differential scanning calorimetry and the frequency dependence of electric polarization by dielectric loss measurements. The results have been analyzed to yield the kinetic parameters characterizing the structural relaxation and are compared with similar analyses of previously published shear compliance and volume relaxation experiments. Relaxation of enthalpy, electric polarization, volume, and shear stress in PVAc all appear to be characterized by somewhat different relaxation times. The difference between the volume and enthalpy relaxation times, coupled with the fact that PVAc exhibits a Prigogine–Defay ratio greater than unity, is evidence for a previously proposed connection between the thermodynamics and kinetics of structural relaxation in terms of an order parameter model.     

Cycloalkyl-substituted salicylaldimine-nickel(II) complexes as mediators in controlled radical polymerization of vinyl acetate

Abstract

Nickel(II) complexes of Schiff base derived from cycloalkylamines (cycloalkyl?=?cyclopentyl (cpen), cyclohexyl (chex), and cycloheptyl (chep)) were synthesized: [Ni^II(L^cpen)₂] (1), [Ni^II(L^chex)₂] (2), and [Ni^II(L^chep)₂] (3). The Schiff base-Ni^II complexes 1-3 were characterized by FTIR, UV–Vis, elemental analysis, and computational methods. Electrodeposited films of complexes 1–3 were obtained by potential cycling CH₂Cl₂ on platinum electrode, and their electrochemical behavior were characterized by cyclic voltammetry. The polymerization of vinyl acetate (VAc) initiated by azobisisobutyronitrile (AIBN) at 55?°C were conducted according to an organometallic-mediated radical polymerization (OMRP) mechanism. The best conversions were obtained using a ratio of [VAc]/[AIBN]/[Ni]?=?542/3.25/1, reaching 50, 69 and 85% in 12?h for 1, 2 and 3, respectively. The kinetic of polymerization mediated by complex 1 exhibited a linear dependence of ln([VAc]₀/[VAc]) versus time, supporting a constant radical concentration; while for the complexes 2 and 3, the radical concentration was constant for a short period of time. The increase of molecular weights with the conversion coupled with low polydispersities indicate a certain level of control of the polymerization when using the complexes [Ni^II(L^R)₂] as controlling agents.     

Compatibility of binary systems of poly(methyl methacrylate), poly(vinyl chloride) and poly(vinyl acetate)

The influence of the thermal treatment on the stability in time of the dispersion degree of films containing binary polymer mixtures, poly(vinyl chloride)/poly(methyl methacrylate), poly(vinyl chloride)/poly(vinyl acetate) and poly(vinyl acetate)/poly(methyl methacrylate), was studied by thermogravimetry and optical microscopy with phase contrast. The dispersion degree depends particularly on the composition of the polymer mixture and can be improved by thermal treatment at temperatures above the glass temperatures of both homopolymers. It seems that this thermal treatment yields exclusively metastable structures with a general tendency to phase separation in a short time after thermal treatment, the heterogeneity mixtures (as film) being more pronounced.     

Reactions of carbonate radical anion with amino-carboxylate complexes of manganese(II) and iron(III)

Abstract

The reaction kinetics of eight amino-carboxylate complexes of Fe(III) and Mn(II) with carbonate radical anion were studied using the pulse radiolysis method and UV-vis spectroscopy. Difference spectra revealed the formation of Fe(IV) and Mn(III) after reaction with CO₃^??. Spectral measurements revealed the first step to be the coordination of carbonate to the metal center. All of these led to the conclusion that the role of coordinated carbonate is essential to the electron transfer process by carbonate radical anion.     

Low-frequency excitations in amorphous poly(vinyl acetate)

Raman-active modes have been detected in amorphous poly(vinyl acetate) in the frequency region 20–160 cm^?1. The low-frequency spectrum appears as a broad band for all three molecular weights examined. Spectra were recorded at two temperatures, 293 and 77 K, and found to show similar characteristics at both temperatures. The presence in solid amorphous polymers of broad structureless bands in general and their significance are discussed.     

Morphology of poly(ethylene oxide)/poly(vinyl acetate) blends

The morphology of poly(ethylene oxide)/poly(vinyl acetate) (PEO/PVAc) blends was examined using small angle X-ray scattering (SAXS) and optical microscopy. The morphological and structural parameters of the blends are dependent on both composition and crystallization conditions. Optical microscopy revealed that blend samples prepared by solution casting crystallized with volume-filling crystals up to a composition of 30/70 wt% PEO/PVAc; at higher PVAc content there was no evidence of crystallization in the temperature range studied. Pure PEO always crystallized with a spherulite-hedrite morphology. The formation of spherulites was relatively favoured at lower crystallization temperatures and by addition of PVAc to PEO. Small angle X-ray intensity profiles were analyzed using a recently developed methodology and it was found that, for a given crystallization temperature, the amorphous and interphase thicknesses increased with increasing PVAc content but that the average crystalline thickness was independent of composition. The morphological and structural properties of the PEO/PVAc blends were attributed to the presence of non-crystallizable material in both the interlamellar and interfibrillar regions.     

Carbon-13 NMR of poly(vinyl acetate) and ethylene–vinyl acetate copolymer

Carbon-13 nuclear magnetic resonance spectra of atactic poly(vinyl acetate) and ethylene–vinyl acetate copolymers are reported and analyzed. Carbon spectra at 22.6 and 62.9 MHz together with use of shift reagents have permitted a more complete assignment than previously reported; in some cases the published assignments are found to be in error.