Phosphorus-containing imide resins. III

Three imide monomers were prepared by reacting maleic anhydride; 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride, bis(m-aminophenyl) methyl phosphine oxide, and tris(m-aminophenyl) methyl phosphine oxide, and tris (m-aminophenyl) phosphine oxide. The characterization was done by elemental analysis and infrared spectroscopy (IR). These monomers were soluble in acetone. Their thermal polymerization was investigated by differential scanning calorimetry (DSC). The temperature of the exothermic peak position was influenced by the presence of free amino group in the monomer and was about 50°C higher in monomers that did not contain amino group. Anaerobic char yield of imide monomers cured at 270 ± 2°C for 30 min ranged from 58 to 64%. Graphite cloth laminate fabricated from one of these resins had a limiting oxygen index of 100.     

Fire- and heat-resistant adhesive resins based on maleimido and citraconimido substituted 1-[(dialkoxyphosphinyl)methyl]-2,4- and -2,6-diaminobenzenes

A novel class of fire- and heat-resistant bisimide resins was prepared by thermal polymerization of maleimido or citraconimido derivatives of 1-[(dialkoxyphosphinyl)methyl]-2,4- and -2,6-diaminobenzenes (1). The neat bisimide resin prepared by curing 1-[di(2-chloroethoxyphosphinyl)methyl]-2,4- and -2,6-bismaleimidobenzene exhibited a limiting oxygen index 75% higher and smoke evolution about 30 times lower compared with the parent polymer obtained by curing m-phenylenebismaleimide. The char yield of cured bisimide resins at 700°C was 58–70% in a nitrogen atmosphere and 35–60% in air. An increase in formula weight between the imide groups slightly reduced the char yield. The polymer precursors were synthesized by reacting the phosphorus-containing diamines (1) (1 mol) with maleic anhydride/citraconic anhydride (2 mol) or by reacting the monomaleimido derivative of (1) with benzophenone tetracarboxylic dianhydride/methylenebis(4-phenylisocyanate) in a 2:1 mole ratio. The monomers were characterized by elemental analysis, Fourier-transform–infrared (FT-IR), proton nuclear magnetic resonance (¹H-NMR) spectroscopy, and gas chromatography–mass spectroscopy (GC-MS). Direct cleavage of the P? C bond and inversion of the synthesis reaction may occur during their pyrolysis. The thermal polymerization of the monomers was investigated by differential scanning calorimetry (DSC). Biscitraconimides are thermally polymerized at a relatively lower temperature than the corresponding bismaleimides.     

Synthesis and characterization of certain new poly(bisimide)s. I

Maleic and citraconic anhydrides were reacted with several diamines to obtain a novel class of high temperature resistant bisimides.^1–3 The bisimides were characterized by melting points, elemental analysis, UV–Vis, ¹H- and ¹³C-NMR, and mass spectral analysis. The bisimide monomers were then polymerized by the addition process. A poly(amidemaleimide) was also synthesized by reacting maleic anhydride with p-aminobenzhydrazide. The thermal stability of these highly crosslinked poly(bisimide)s were examined by TGA and DTA. A neat bisimide monomer obtained from 2,2′-bis[4(p-aminophenoxy)phenyl] propane with maleic anhydride namely, 2,2′-bis[4-(p-maleimidophenoxy)phenyl]propane was reacted with 2,2′-bis[4(p-aminophenoxy)phenyl]propane by the Michael reaction.⁴ A fiber glass cloth reinforced laminate was prepared from bismaleimide and amine mixture and the mechanical properties of the test laminate evaluated.     

Thermally stable polymers based on addition-type imidobenzoxazoles; synthesis and characterization of polybismaleimidobenzoxazoles and polybiscitraconimidobenzoxazoles

Four structurally different bisimidobenzoxazole monomers were synthesized, based on the reaction of two isomeric diaminobenzoxazoles, viz., 5-amino-2-(p-aminophenyl) benzoxazole and 5-amino-2-(m-aminophenyl) benzoxazole with maleic and citraconic anhydrides. The diamines were synthesized by a new route. The imides and the amic intermediates were characterized by elemental analysis, IR, NMR, and mass spectra. The imides could be thermally polymerized to crosslinked brittle polybisimidobenzoxazoles. The citraconimides polymerized at a lower temperature than the maleimide. Thermal stability of the cured resins was evaluated by TGA and was correlated to the structure of the polyimide. The polybismaleimidobenzoxazoles were stable up to about 500°C in N₂, leaving 50–60% anaerobic char yield at 800°C, whereas polybiscitraconimidobenzoxazoles were stable up to 420°C. Comparison of the thermal behavior of similar polyimides based on oxydianiline revealed that incorporation of benzoxazole structure enhances the decomposition temperature, lowers the rate of decomposition, and enhances the anaerobic char yield at high temperature. Addition of diamines as chain-extending agents decreased the thermal stability of the resins without any change in the anaerobic char yield.     

Addition polyimides. III. Thermal behavior of bismaleimides

This article describes the synthesis of N,N′-bis(3,3′-maleimidophenyl) sulfone (S) and its Michael addition products with (4,4′-diaminodiphenyl) methane (S-M), 4,4′-diaminodiphenyl ether (S-E), (3,3′-diaminodiphenyl) sulfone (S-DDS_m), (4,4′-diaminodiphenyl) sulfone (S-DDS_p), (3,3′,3″-tris aminophenyl) phosphine oxide (S-TAP), and 9,9-bis(p-aminophenyl) fluorene (S-B). Curing behavior of these bisimides was investigated by differential scanning calorimetry. Activation energy of curing reaction was determined by using isothermal and multiple heating rate method. Thermal stability of bisimides was evaluated by thermogravimetric analysis. Better char yields were obtained in S-TAP resins.     

Polyimides containing nonaromatic nitrogen linkages

Two diamines, 2,5-bis (4-aminophenyl)-2,5-diazahexane and 1,4-bis (4-aminophenyl)-1,4-diazacyclohexane were chosen as components for polyimidizations because they have melting points that differ by nearly 200°C (66–67 and 229–230°C, respectively) and are relatives of p-nitro-N,N-dimethylaniline. The melting points of the model compounds (phthalic anhydride) do not differ by as much as those of the free amines [303–304 and 386°C (DSC), respectively]. Six polyimides were prepared by a two-step polycondensation of the diamines with pyromellitic dianhydride, benzophenonetetracarboxylic dianhydride, and 5,5'-[2,2,2-trifluoro-1-(trifluoromethyl) ethylidene] bis-1,3-isobenzofurandione. DSC thermograms failed to indicate any distinct transitions up to 450°C, however, the polyimide prepared from 2,5-bis (4-aminophenyl)-2,5-diazahexane and pyromellitic dianhydride shows a slight break in its DSC curve at 233°C.     

Bismaleimides and bisnadimides derived from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and their polymerization to heat-resistant matrix resins

Six new structurally different bismaleimides or bisnadimides based on 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene (BADT) were synthesized and characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. Chain-extension of several bismaleimides was accomplished by incorporating various imide, amide, and urea groups. The bismaleimide and bisnadimide prepared by reacting BADT with maleic or nadic anhydride, respectively, were soluble in various organic solvents. The monomers were thermally polymerized or by a Michael reaction with certain aromatic diamines. Curing behavior was investigated by differential thermal analysis (DTA). The thermal and thermo-oxidative stability of polymers was evaluated by dynamic thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). The polymers derived from bismaleimide of BADT as well as from the bismaleimides chain-extended by imide groups were stable up to 355–392°C in N₂ or air and afforded anaerobic char yield 66–74% at 800°C. The polymers obtained by curing the bismaleimide-diamine adducts showed a relatively lower thermal stability.     

Studies on metathetical and thermal polymerization of 5-norbornene 2,3-dicarboximide end-capped resins Pt-II

The article deals with synthesis, characterization, and polymerization of 5-norbornene-2,3-dicarboximide end-capped resins (bisnadimides) based on 4,4′-diaminodiphenylether, 1,4/1,3-bis(4′-aminophenoxy) benzene, 2,2′-bis[4-(4′-aminophenoxy)phenyl]propane, and bis[4-(4′-aminophenoxy)phenyl]sulphone. Both exo and endo bisnadimides were prepared by reacting the aromatic diamines with exo or endo nadic anhydride in glacial acetic acid at 120°C. The exo or endo bisnadimides could be distinguished on the basis of differences observed in IR or ¹H-NMR spectra. Both thermal (in solid state) and metathetical polymerization (using WCl₆/tetramethyltin catalyst and chlorobenzene solvent) of bisnadimides was carried out. Only exo bisnadimides could be polymerized using metathesis reaction whereas thermal polymerization of both endo and exo bisnadimide could be successfully carried out at 300°C in static air atmosphere. The polymers were highly crosslinked and insoluble in common organic solvents. The polymers obtained by metathesis polymerization were light brown in color whereas those obtained by thermal polymerization were dark brown in color. Thermal stability of the thermally polymerized exo or endo bisnadimides was comparable. These polymers were stable up to 400°C and decomposed in a single step above this temperature. The char yield at 800°C depended on the structure of the polymer and was in the 39–56% range. The polymers formed by metathesis polymerization showed a 1–3% weight loss in the temperature range 226–371°C and decomposed in a single step above 440°C. The char yields were higher in these polymers (53–71%) compared to those obtained by thermal polymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2323–2331, 1997     

New poly(amide-imide)s syntheses. I. Soluble high-temperature poly(amide-imide)s derived from 2,5-bis(4-trimellitimidophenyl)-3,4-diphenylthiophene and various aromatic diamines

Novel aromatic poly(amide-imide)s with high inherent viscosities were prepared by direct polycondensation reaction of 2,5-bis(4-trimellitimidophenyl)-3,4-diphenylthiophene ( IV ) and aromatic diamines using triphenyl phosphite in the N-methyl–2-pyrrolidone (NMP)/pyridine solution containing dissolved CaCl₂. The diimide-diacid IV was readily obtained by the condensation reaction of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene ( III ₁) with trimellitic anhydride. The obtained poly(amide-imide)s showed high thermostability. Their decomposition temperatures at 10% weight loss in nitrogen atmospheres were above 550°C and the anaerobic char yield at 800°C ranged from 48 to 68%. Almost all the poly(amide-imide)s showed high glass transition temperatures above 300°C by differential scanning calorimetry (DSC) measurements. These polymers were readily soluble in various organic solvents and could be cast into transparent, tough, and flexible films. Their casting films showed obvious yield points in the stress-strain curves and had strength at break up to 74.2 MPa, elongation to break up to 70.1%, and initial modulus up to 4.56 GPa. The factors affecting the reaction of diimide-diacid IV and 4,4′-oxydianiline in view of monomer concentration, reaction temperature, and amount of CaCl₂ were also investigated. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of soluble aromatic polyamides from 2,5-bis(4-aminophenyl)—3,4-diphenylthiophene and aromatic diacid chlorides

New soluble aromatic polyamides with inherent viscosities of 1.0–1.7 dL/g were prepared by the low temperature solution polycondensation of 2,5-bis(4-aminophenyl)—3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic diacid chlorides in N,N-dimethylacetamide. The polyamides and copolyamides are generally soluble in amide-type solvents. They have glass transition temperatures in the range of 280–325°C and showed no weight loss below 390°C on thermogravimetry curves in both air and nitrogen atmospheres.     

Synthesis and characterization of acetylene-terminated aromatic amide resin precursors

A series of 10 acetylene-terminated aromatic amide monomers was synthesized by the triethylamine-promoted reaction of bis[p-(m-chlorocarbonylphenoxy)phenyl] sulfone or bis[p-(m-chlorocarbonylphenoxyl)phenyl]ketone with o- or p-ethynyl- and o- or p-trimethylsilylethynylaniline. Yields were essentially quantitative. Structures were verified by infrared and nuclear magnetic resonance spectroscopy and mass spectral data. Thermal characteristics of the monomers were investigated by means of differential scanning calorimetry and thermogravimetric analysis. The initial glass transition temperatures were generally well below the onset of cure which occurred in the 160–225°C range for the terminal ethynyl monomers and in the 260–295°C range for their trimethylsilylethynyl analogs. Onset of decomposition in air for the resinified terminal ethynyl monomers took place in the 400–485°C range, while resins from the trimethylsilylethynyl monomers underwent breakdown at substantially lower temperatures.     

Thermostable laminating resins based on aromatic diketone bis- and tetramaleimides

Twelve structurally different bis- and tetramaleimides were synthesized by Friedel–Crafts reaction between 4-maleimido-benzoylchloride or 3,5-bismaleimido-benzoylchloride and various aromatic reagents. They were characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. Crosslinked resins were obtained by curing the monomers at 250°C/6 h. Thermal characterization of monomers and cured resins was accomplished by differential thermal analysis (DTA), dynamic thermogravimetric analysis (TGA), and isothermal gravimetric analysis (IGA). Tetramaleimides were polymerized at lower temperatures than did the respective bismaleimides. The cured resins were stable up to 317–385°C in N₂ atmosphere and formed an anaerobic char yield of 52–66% at 800°C.     

Bismaleimides chain-extended by imidized benzophenone tetracarboxylic dianhydride and their polymerization to high temperature matrix resins

Heat-resistant polymers were obtained by thermal polymerization of several bismaleimides or their substituted derivatives. The chain of the polymer precursors was extended by incorporation of imidized benzophenone tetracarboxylic dianhydride between the maleimide rings in order to impart a degree of flexibility in the polymers. The bismaleimides and their corresponding tetraamic acids were characterized by infrared (IR) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The differential thermal analysis (DTA) thermograms of the monomers showed exotherms at 200–340°C attributed to the thermally induced polymerization reactions. The influence of different substituents in the maleic double bond on the curing temperature was investigated. The thermal stability of the cured resins was evaluated by thermogravimetric analysis (TGA) and isothermal gravimetric analysis (IGA). They were stable up to 367–433°C both in nitrogen and air atmosphere and afforded 57–68% char yield at 800°C under anaerobic conditions. The structure of the aromatic and aliphatic diamines utilized for imidization was correlated with the thermal stability of the cured resins. The bismaleimide derived from p-phenylenediamine gave the most heat-resistant resin because of its higher rigidity.     

New Organosoluble and Optically Transparent Polyamides Containing Xanthene Units and Methyl Pendant Groups From 9,9-Bis[4-(4-carboxyphenoxy)-3-methylphenyl]xanthene

A new aromatic dicarboxylic acid, 9,9-bis[4-(4-carboxyphenoxy)-3-methylphenyl]xanthene (BCAMPX) was prepared from the nucleophilic substitution reaction of 9,9-bis(4-hydroxy-3-methylphenyl)xanthene with p-fluorobenzonitrile, followed by alkaline hydrolysis. Then BCAMPX was polycondensated with various aromatic diamines to afford the polyamides with the number-average molecular weight in the range of 45,300–51,500 and the polydispersity index ranged from 1.67 to 1.85. These polyamides showed glass transition temperatures between 260–286°C and 10% weight loss temperatures ranging from 490 to 504°C and 480 to 490°C in nitrogen and air respectively, and char yields above 52% at 800°C in nitrogen. Nearly all polyamides were readily soluble polar aprotic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), tetrahydrofuran and pyridine, and afforded transparent, strong and flexible films upon casting from DMAc solvent. All polyamides were amorphous and exhibited tensile strengths of 80–91 MPa, elongations at break of 9–13%, and initial moduli of 1.95–2.82 GPa, as well as low moisture absorption in the range of 2.65–3.65%, and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 360–378 nm range.     

Synthesis and thermal stability of the resins prepared from the reactions of 1,4-bis(2,2-dicyanovinyl)benzene with aromatic diamines and electrical conductivity of the resulting materials following pyrolysis

New thermosetting resins were prepared from the reaction of 1,4-bis(2,2-dicyanovinyl)benzene with aromatic diamines in varying molar ratios. The thermal stability of these resins was correlated with their composition and the curing conditions. They were stable in N₂ up to 370–448°C and afforded anaerobic char yields of 73–84% at 800°C after curing at 300°C for 20–60 h. The temperature dependence of the electrical resistivity of all resins pyrolyzed at 700°C for 15 h was studied in the temperature range from ?173–327°C (100–600 K). The results showed that at room temperature the unpyrolyzed polymers have insulating properties, whereas a dramatic decrease in the electrical resistivity is observed following pyrolysis. The temperature dependence of the electrical resistivity suggests that all of the materials studied have semiconducting properties. The observed electrical conductivity is thermally activated with activation energies ranging from 0.03–0.06 eV. © 1994 John Wiley & Sons, Inc.     

Thermally stable polymers based on bismaleimides containing amide,imide, and ester linkages

Seven new structurally different bismaleimides were synthesized and characterized by infrared and proton nuclear magnetic resonance spectroscopy. The chain of these polymer precursors was extended by incorporating amidized, imidized, and esterified 4-chloroformyl phthalic anhydride. The bismaleimides containing amide and imide linkages were prepared by a simple synthetic route based on the reaction of the monomaleamic acid derived from various aromatic diamines (1 mol) with 4-chloroformyl phthalic anhydride (0.5 mol) and subsequent cyclodehydration of the intermediate triamic acid. In addition, chain extended bismaleimides were prepared by reacting the monomaleamic acid derived from p-phenylenediamine with several dianhydrides such as p-phenylene bis(trimellitamide anhydride), p-phenylene bis(trimellitate anhydride), and bis-phenol A bis(trimellitate anhydride). The differential thermal analysis scans of bismaleimides showed exotherms at 221–304°C associated with their polymerization reactions. The thermogravimetric analysis traces of polymers did not show a weight loss up to 351–393 and 344–372°C in N₂ and air atmospheres, respectively. The anaerobic char yield of polymers at 800°C was 44–61%. These polymers can be used for fabrication of composites having improved properties.     

Synthesis and characterization of new polyamideimides with a highly flexible soft block

Five new polyamideimides (PAI) were synthesized from five diacid chlorides with preformed imide rings and a telechelic α,ω-diamino-polyoxyethylene (Jeffamine JFA ED600). The diacid chloride monomers could be obtained in high yields (77–92%) from chlorinating the corresponding diacids which were obtained from the reaction of trimellitic anhydride with aromatic diamines (1,4-phenylene diamine; 2,2-bis(4-aminophenyl)methane; 2,2-bis(4-aminophenyl)propane; 4,4′-oxydianiline and 1,1-bis(4-aminophenyl)cyclohexane). The telechelic monomers were characterized by FTIR and ¹H-NMR. After a few preliminary experiments aimed at optimizing the polymerization conditions for particularly poorly soluble diacid chlorides, five new PAI were synthesized with inherent viscosities in the range of 0.35–0.65 dL/g. Their characterization by transmission FTIR and by advanced NMR techniques, including heteronuclear 2D NMR, fully confirmed their chemical structure as shown by the complete assignments of their ¹H and ¹³C-NMR spectra. Compared with other PAI described in the literature, these polymers proved to be much more sensitive towards polar organic solvents even showing significant solubilities in chloroform and tetrahydrofuran. These materials enabled the casting of transparent films which were very tough in the dry state. However, and as further evidenced by a DSC investigation, their phase separation is usually not sufficient to provide a very strong physical crosslinking by the aggregation of the polymer hard blocks. Consequently, their physical crosslinking would have to be significantly improved for preventing the material failure in highly solvating media and open the way for new performances in membrane separation systems. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2873–2889, 1999     

Synthesis and characterization of soluble aromatic polyazomethines from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and aromatic dialdehydes

New soluble aromatic polyazomethines with inherent viscosities of 0.4–0.8 dL/g were prepared by the solution polycondensation of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic dialdehydes in o-chlorophenol at 20°C. The copolyazomethines are generally soluble in chlorinated hydrocarbons, amide-type or phenolic solvents. The thermal stability of the polymers, which showed no weight loss up to 400°C in both air and nitrogen atmospheres.     

Styrylpyridine-based epoxy resins: Synthesis and characterization

Polymers containing rigid aromatic structures in the chain backbone usually gave high thermal stability and good flammability resistance. Three glycidyl ethers of epoxy resins were prepared from 2,4-di(p-hydroxystyryl)pyridine (2,4-DGESP), 2,6-di-(p-hydroxystyryl)pyridine (2,6-DGESP), and 2,4,6-tri-(p-hydroxystyryl)pryidine (2,4,6-TGESP) to study the relationships of structure to polymer degradation. To prepare a highly crosslinked material, trimethoxyboroxine (TMB) was used as the curing agent. The relative char yields of the three different resins, as measured by TGA, were 2,4-DGESP ≈ 2,6-DGESP > 2,4,6-TGESP. The char yield of the cured 2,6-DGESP varied with different amounts of the TMB curing agent, and was higher than the uncured 2,6-DGESP. The oxygen index increased as a function of thermal curing time for the 2,6-DGESP epoxy resin. An intermolecular Diels–Alder reaction with 2,6-DGESP is proposed as a primary reaction during thermal curing.     

Preparation and Properties of Novel Aromatic Polyamides from Diamines Containing 4,5-Imidazolediyl Structure

Novel aromatic polyamides were prepared from aromatic diamine containing 4,5-imidazolediyl unit, either by low temperature solution polycondensation or by direct polycondensation. Used diamines were 4,5-bis(4-aminophenyl)-2-phenylimidazole 1, 4,5-bis[4-(4-aminophenyl)]-2-(4-methylphenyl)imidazole 2 and 4,5-bis[4-(4-aminophenoxy)phenyl]-2-phenylimidazole 3. The obtained aromatic polyamides were produced with moderate to high inherent viscosity and soluble in polar aprotic solvents such as N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidone (NMP), N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Thermogravimetric analysis showed those polymers were stable up to 422°C in nitrogen atmosphere. The glass transition temperature (T _g)s of the polymers derived from diamine 3 were in the range between 243 and 275°C, and these values were approximately 120–160°C lower than those analogue polyamide I series containing no phenoxy units. The properties of polyamide I series are also compared with those of analogue polymers that order of aromatic nuclei and amide linkage is reversible.