Copolymerization of 4-cyclopentene-1,3-dione with p-chlorostyrene and vinylidene chloride

The copolymerization of 4-cyclopentene-1,3-dione (M₂) with p-chlorostyrene and vinylidene chloride is reported. The copolymers were prepared in sealed tubes under nitrogen with azobisisobutyronitrile initiator. Infrared absorption bands at 1580 cm.^?1 revealed the presence of a highly enolic β-diketone and indicated that copolymerization had occurred. The copolymer compositions were determined from the chlorine analyses and the reactivity ratios were evaluated. The copolymerization with p-chlorostyrene (M₁) was highly alternating and provided the reactivity ratios r₁ = 0.32 ± 0.06, r₂ = 0.02 ± 0.01. Copolymerization with vinylidene chloride (M₁) afforded the reactivity ratios r₁ = 2.4 ± 0.6, r₂ = 0.15 ± 0.05. The Q and e values for the dione (Q = 0.13, e = 1.37), as evaluated from the results of the vinylidene chloride case, agree closely with the previously reported results of copolymerization with methyl methacrylate and acrylonitrile and confirm the general low reactivity of 4-cyclopentene-1,3-dione in nonalternating systems.     

Copolymerization of 2-sulfoethyl methacrylate

Copolymers of 2-sulfoethyl methacrylate, (SEM) were prepared with ethyl methacrylate, ethyl acrylate, vinylidene chloride, and styrene in 1,2-dimethoxyethane solution with N,N′-azobisisobutyronitrile as initiator. The monomer reactivity ratios with SEM (M₁) were: vinylidene chloride, r₁ = 3.6 ± 0.5, r₂ = 0.22 ± 0.03; ethyl acrylate, r₁ = 3.2 ± 0.6, r₂ = 0.30 ± 0.05; ethyl methacrylate, r₁ = 2.0 ± 0.4, r₂ = 1.0 ± 0.1; styrene, r₁ = 0.6 ± 0.2, r₂ = 0.37 ± 0.03. The values of the copolymerization parameters calculated from the monomer reactivity ratios were e = +0.6 and Q = 1.4. Comparison of the monomer reactivities indicates that SEM is similar to ethyl methacrylate with regard to copolymerization reactivity in 1,2-dimethoxyethane solution. The sodium salt of 2-sulfoethyl methacrylate, SEM^?Na^⊕, was copolymerized with 2-hydroxyethyl methacrylate (M₂) in water solution. Reactivity ratios of r₁ = 0.7 ± 0.1 and r₂ = 1.6 ± 0.1 were obtained, indicating a lower reactivity of SEM^?Na^⊕ in water as compared to SEM in 1,2-dimethoxyethane. This decreased reactivity was attributed to greater ionic repulsion between reacting species in the aqueous medium.     

Photosensitized copolymerization of optically active N-l-menthylmaleimide with styrene and methyl methacrylate

Photosensitized copolymerization of optically active N-l-menthylmaleimide (NMMI) with styrene (Sty) and methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) at 30°C with benzoyl peroxide (BPO). The monomer reactivity ratios for the copolymerization of NMMI (M₂) with Sty (M₁) and MMA (M₁) were r₁ = 0.08 ± 0.10, r₂ = 0.20 ± 0.05 and r₁ = 2.85 ± 0.06, r₂ = 0.07 ± 0.06, respectively. Copoly-MMA–NMMI and poly-NMMI showed positive circular dichroism(CD) curves of equal intensity and shape over the wavelength region from 230 to 270 nm; copoly-Sty–NMMI also showed a positive CD curve which was similar in shape but was different in intensity from that of poly-NMMI. The correlation between monomer unit ellipticity of the copolymers and their composition would suggest the alternating and stereoregular copolymerization of NMMI with Sty.     

On the copolymerization model and microstructure of methyl acrylate - styrene radical copolymer. Influence of ZnCl2

Bulk radical copolymerization of methyl acrylate (MeA, M₁) with styrene (St, M₂) in presence and absence of ZnCl₂ as complexing agent was studied. ¹H-NMR spectra were used to establish copolymer composition and sequence distribution. The methoxy group signal was observed to be split due to pentads, but the analysis of sequence distribution is possible only at triad level. Both composition and sequence distribution data confirmed that bulk radical copolymerization respects quite well the terminal addition model; the values of r₁ = 0.14 ± 0.02 (from composition data) and r₁ = 0.25 ± 0.03 (from sequence distribution data) and r₂ = 0.83 ± 0.10 (from composition data) were found. The presence of ZnCl₂ increases the probability of alternating addition, e.g., for [ZnCl₂]/[MeA] = 0.2, r₁ = 0.03 ± 0.02 and r₂ = 0.17 ± 0.03. The radical copolymer obtained in bulk in the absence of ZnCl₂ presents a coisotactic configuration with σ = 0.75 ± 0.03, but the presence of the complexing agent reduces the probability of coisotactic addition, e.g., for [ZnCl₂]/[MeA] = 0.2, σ = 0.52 ± 0.03.     

Copolymerization of 1,6-anhydroglucose and 1,6-anhydromaltose derivatives

The copolymerization of 1,6-anhydro-2,3,4-tri-O-(p-methyl-benzyl)-β-D -glucopyrnose [TXGL, M₁] with 1,6-anhydro-2,3-di-O-benzyl-4-O-(2,3,4,6-tetra-O-benzyl-α-D -glucopyranosyl)-β-D -glucopyranose [HBMA, M₂] has been studied as a method of producing dextrans of controlled composition with a linear backbone and randomly distributed single glucose units as side chains. Copolymers of intrinsic viscosities ranging from 0.51 to 0.05 dl/g are produced. The copolymerization appears to follow classical copolymerization theory but is affected adversely by the low reactivity of the maltose derivative. Reactivity ratios have been calculated for runs catalyzed by 10 mole-% and 20 mole-% phosphorus pentafluoride (PF₅): r₁ = 1.91 ± 0.35, r₂ = 0.28 ± 0.25 and r₁ = 2.21 ± 0.15, r₂ = 0.21 ± 0.10, respectively.     

Cationic copolymerization of β-pinene and epichlorohydrin

β-Pinene and epichlorohydrin (ECH) have been copolymerized cationically using BF₃(C₂H₅)₂O and SnCl₄ as catalysts. Polymerizations were carried out at ?80°C in methylenechloride. Monomer reactivity ratios were determined in both catalysts which were r₁(ECH) = 1.06 ± 0.15 and r₂ (β-pinene) = 0.32 ± 0.08 in BF₃(C₂H₅)₂O and r₁(ECH) = 0.33 ± 0.11 and r₂(β-pinene) = 2.03 ± 0.44 in SnCl₄. Copolymers of different composition were soluble in acetone and insoluble in methanol. This characteristic was taken to indicate that the polymeric products were real copolymers and not a mixture of two homopolymers of epichlorohydrin and β-pinene.     

Effect of reaction medium on copolymerization of acrylonitrile and methyl acrylate

The copolymerization of acrylonitrile (AN) with methyl acrylate (MEA) has been investigated in three types of polymerization, i.e., emulsion polymerization in water with a water-soluble initiator, suspension polymerization in water with an oil-soluble and water-insoluble initiator, and solution polymerization in dimethyl sulfoxide (DMSO). Monomer reactivity ratios at 50°C. for AN and MEA are found to be r₁ = 0.78 ± 0.02, r₂ = 1.04 ± 0.02 in emulsion polymerization; r₁ = 1.02 ± 0.02, r₂ = 0.70 ± 0.02 in DMSO solution polymerization; r₁ = 0.75 ± 0.05, r₂ = 1.54 ± 0.05 in suspension polymerization. The large differences found in the reactivity ratios may be attributed to the different ratio of concentration of two monomers in the loci of polymerization. Chemically, AN is somewhat more reactive than MEA as shown by the reactivity ratios in DMSO. In the case of the suspension polymerization, the MEA/AN ratio in the polymer particles in which polymerization occurs may be higher than that in the total phase. Experimental results of the emulsion polymerization show that the emulsion polymerization of AN occurs both in the particles and in water. In addition, rates of the copolymerization of AN with MEA have also been investigated.     

Copolymerization and Copolymers of 2,4,5-Tribromostyrene with Styrene and Acrylonitrile

Abstract

2,4,5-Tribromostyrene (TBSt) was copolymerized with styrene (St) or acrylonitrile (AN) in toluene solution using 2,2′-azobisisobutyronitrile as free radical initiator. The copolymerization reactivity ratios were found to be for the system TBSt/St r ₁ = 1.035 ± 0.164 (TBSt) and r ₂ = 0.150 ± 0.057 (St), and for the system TBSt/AN r ₁ = 2.445 ± 0.270 (TBSt) and r ₂ = 0.133 ± 0.054 (AN). The e and Q values were also calculated. The initial copolymerization rate, R _p, for both systems linearly increases as the content of TBSt in the monomer mixture increases. However, these values are somewhat higher when AN was used as a comonomer. A similar behavior has also been established for the course of the copolymerization reactions to high conversion. The resulting copolymers and TBSt-homopolymer show similar thermal stabilities of polystyrene. However, the glass transition temperature increases markedly with increasing TBSt content.     

Transformation of copolymerization mechanism of N-phenyl maleimide and ethyl phenylacrylate in the mixture of dioxane and pyridine

The copolymerization of N-phenylmaleimide (NPMI) with ethyl phenylacrylate (EPA) in a mixture of dioxane (DIO) and pyridine (Py) was investigated. The apparent monomer reactivity ratio r₁ (NPMI) = 0.07 ± 0.01 and r₂ (EPA) = 0.09 ± 0.02 in DIO was turned to r₁ (NPMI) = 3.67 ± 0.07 and r₂ (EPA) = 0 ± 0.03 in Py. The copolymerization of NPMI and EPA with the fixed feed ratio (mol/mol 1 : 1) in different volume ratio of DIO/Py showed that the copolymer composition might be varied in a wide range from the 93.5% of NPMI contents in copolymer to 48.7%. When the volume fraction of Py in the mixture of DIO and Py was <10%, the copolymer with nice alternating structure was obtained and the copolymerization could be inhibited completely by hydroquinone; if the fraction of Py was >10%, the following two kinds of copolymers were formed: a copolymer in which the content of NPMI increased with the Py and the copolymerization also could be inhibited by hydroquinone and a copolymer with low molecular weight almost completely composed of homopolymer of NPMI and is not affected by radical inhibitor as hydroquinone. The transformation of the copolymerization mechanism from the radical to anionic, which was dependent on the volume ratio of DIO and Py, was suggested. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2755–2761, 1999     

Spontaneous alternating copolymerization of N-phenylmaleimide with ethyl α-phenylacrylate

The spontaneous copolymerization of N-phenylmaleimide (NPMI) (M₁) with ethyl α-phenylacrylate (EPA)(M₂) were carried out in dioxane at 85°C. A high alternating tendency was observed. The monomer reactivity ratios were r₁ = 0.07 ±0.01 and r₂ = 0.09 ± 0.02. The maximum copolymerization rate and molecular weight occurs at 70–80 mol% (M₁) in feed ratio. The spontaneous alternating copolymerization is considered to be carried out via a contact-type charge transfer complex (CTC) formed between the monomers. Thermogravimetric analyses (TGA) indicate the resulting copolymers have high thermal stability. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2927–2931, 1998     

Copolymerization of isopropenyl and isopropylidene oxazolones with styrene

2-Isopropenyl-4-isopropyl-2-oxazolin-5-one (M₂), was copolymerized with styrene (M₁), and the monomer reactivity ratios were determined to be r₁ = 0.31 ± 0.03, r₂ = 1.12 ± 0.10. New isomerized oxazolones (M₂), 2-isopropylidene-4-methyl-3-oxazolin-5-one, 2-isopropylidene-4-isopropyl-3-oxazolin-5-one, and 2-isopropylidene-4-isobutyl-3-oxazolin-5-one were prepared and copolymerized with styrene. The monomer reactivity ratios were: r₁ = 0.36 = 0.07, r₂ = 0.0; r₁ = 0.39 ± 0.06, r₂ = 0.00 ± 0.10; r₁ = 0.39 ± 0.10, r₂ = 0.0, respectively. The isomerized oxazolones showed no tendency towards homopolymerization by radical initiator. From the results of infrared and NMR spectra and hydrolysis of the copolymer, it was indicated that the isomerized oxazolones participated in copolymerization in the form of 1–4 polymerization of the conjugated dienes (exo double bond at C₂ and the C?N in the ring). Copolymers reacted with nucleophilic reagents such as amines and alcohols.     

Polymerization of meta-naphthoquinone methide: 3,4-benzo-6-methylenebicyclo [3.1.0] hex-3-ene-2-one

Polymerization behavior of meta-naphthoquinone methide, 3,4-benzo-6-methylenebicyclo[3.1.0]hex-3-ene-2-one ( 1 ), was studied. Radical initiator 2,2′-azobis(isobutyronitrile) (AIBN) induced polymerization of 1 , but ionic initiators potassium tert-butoxide, butyllithium, and boron trifluoride etherate did not. Polymerization of 1 proceeded via ring-opening and aromatization to give a polymer with head-to-tail monomer unit placement. Compound 1 copolymerized with methyl methacrylate (MMA) in the presence of AIBN to obtain the monomer reactivity ratios r₁ ( 1 ) = 0.28 ± 0.07 and r₂(MMA) = 0.39 ± 0.02 at 60°C and Q and e values of Q = 1.04 and e = −1.03, indicating that 1 is a conjugative and electron-donating monomer. Ring-opening and aromatization of 1 also took place in the copolymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 741–746, 1997     

Copolymerization of glycidyl methacrylate with alkyl acrylate monomers

A newer approach to obtaining acrylic thermoset polymers with adequate hydrophilicity required for various specific end uses is reported. Glycidyl methacrylate (GMA) was copolymerized with n-butyl acrylate (n-BA), isobutyl acrylate (i-BA), and 2-ethylhexyl acrylate (2-EHA) in bulk at 60°C. with benzoyl peroxide as free radical initiator. The copolymer composition was determined from the estimation of epoxy group. Reactivity ratios were calculated by the Yezrielev, Brokhina, and Roskin method. For copolymerization of GMA (M₁) with n-BA (M₂) the reactivity ratios were r₁ = 2.15 ± 0.14, r₂ = 0.12 ± 0.03; with i-BA (M₂) they were r₁ = 1.27 ± 0.06, r₂ = 0.33 ± 0.031; and with 2-EHA (M₂) they were r₁ = 2.32 ± 0.14, r₂ = 0.13 ± 0.009. The reactivity ratios were the measure of distribution of monomer units in a copolymer chain; the values obtained are compared and discussed.     

Ethylene/1‐hexene copolymerization with tetramethyldisiloxane‐bridged bis(indenyl) metallocenes

Ethylene/1‐hexene copolymerizations with disiloxane‐bridged metallocenes, rac‐ and meso‐1,1,3,3‐tetramethyldisiloxanediyl‐bis(1‐indenyl)zirconium dichloride (rac‐ 1 , meso‐ 1 ) activated by modified methylaluminoxane were performed to investigate the influence of conformational dynamics on comonomer selectivity. Although ¹H NOESY (nuclear Overhauser and exchange spectroscopy) analysis indicated that the most stable conformation for the meso isomer in solution was that in which both indenes project over the metal coordination site, this isomer showed higher 1‐hexene selectivity in copolymerization (r_e = 140 ± 30, r_h = 0.024 ± 0.004) than the rac isomer with only one indene over the coordination site (r_e = 240 ± 20, r_h = 0.005 ± 0.001). The meso isomer showed high 1‐hexene selectivity, a high product of reactivity ratios (r_er_h = 3.3 ± 0.5) and produced copolymers that could be separated into fractions with different ethylene content suggesting that the active species exhibited multisite behavior and populated conformations with different comonomer selectivities during the copolymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3323–3331, 2004     

Comparative recalculation of the monomer reactivity ratios in copolymerization for styrene and methyl methacrylate

The monomer reactivity ratios (MMRs) in radical copolymerization for styrene and methyl methacrylate were recalculated by five different methods using literature copolymerization data. The use of approximate 95% confidence limits and their visual inspection helps to separate possibly biased copolymer composition data. The recalculated mean MRR values were r₁ (styrene) = 0.501 ± 0.031 and r₂ = 0.472 ± 0.031. The results of the linear least-squares calculation procedures seldom approach the quality of the nonlinear least-squares analysis according to the method of Tidwell and Mortimer.     

Polymerization of β-cyanopropionaldehyde. X. Anionic copolymerization with methyl isocyanate

Anionic copolymerization of β-cyanopropionaldehyde (M₁) with methyl isocyanate (MeI, M₂) was studied with use of benzophenone–dilithium complex as initiator at ?78°C. The values of monomer reactivity ratio were determined to be r₁ = 8.3 ± 0.3 and r₂ = 0.01 ± 0.01. The structure of resulting copolymer was investigated by means of NMR analysis. The MeI unit is presumed to enter the copolymer chain through its C?N opening.     

Monomer reactivity ratio and Q–e values for copolymerization of hydroxyalkyl acrylates and 2-(1-aziridinyl)ethyl methacrylate with styrene

Copolymers of 2-hydroxyethyl acrylate, hydroxypropyl acrylate, and 2(1-aziridinyl)-ethyl methacrylate (M₂) with styrene (M₁) were prepared in benzene solution at 60°C. Benzoyl peroxide, 0.1–0.2 mole-%, was used as initiator. Copolymer samples with the molar concentrations of M₂ feed ranging from 0.10 to 0.85 were used to determine the reactivity ratios. Elemental analysis and nuclear magnetic resonance spectroscopy (NMR) were used to determine copolymer compositions. There was a solubility problem when the latter technique was applied. When samples which were completely soluble were analyzed, the results obtained from NMR and elemental analysis were in excellent agreement. The monomer reactivity ratios and the corresponding parameters for the copolymerization of (M₁) with 2-hydroxyethyl acrylate are: r₁ = 0.38 ± 0.02, r₂ = 0.34 ± 0.03; Q₂ = 0.85, e₂ = 0.64; with hydroxypropyl acrylate are: r₁ = 0.45 ± 0.03, r₂ = 0.36 ± 0.03; Q₂ = 0.75, e₂ = 0.56; with 2(1-aziridinyl)ethyl methacrylate are: r₁ = 0.53 ± 0.02, r₂ = 0.63 ± 0.04; Q₂ = 0.82, e₂ = 0.25.     

Synthesis,Characterization, and Reactivity Ratios of Phenyl Methacrylate-N-vinyl-2-pyrrolidone Copolymers

Free radical solution copolymerization of phenyl methacrylate and N-vinyl-2-pyrrolidone was carried out using benzoyl peroxide in 2-butanone solution at 70°C. The composition of the copolymer was determined using ¹H-NMR spectra by comparing the intensities of aromatic protons to that of total protons. The results were used to calculaie the copolymerization reactivity ratios by both the Fineman-Ross (F-R) and Kelen-Tüdös (K-T) methods. The reactivity ratios are r ₁ = 4.49 ± 1.27 and r ₂ = 0.05 ± 0.09 as determined by the K-T method. These values are in good agreement with those determined by the F-R method. The FT-infrared and ¹³C-NMR spectra of the copolymer are discussed.     

Determination of the reactivity ratios of methyl acrylate with the vinyl acetate,vinyl 2,2-dimethyl-propanoate,and vinyl 2-ethylhexanoate

The course of composition drift in copolymerization reactions is determined by reactivity ratios of the contributing monomers. Since polymer properties are directly correlated with the resulting chemical composition distribution, reactivity ratios are of paramount importance. Furthermore, obtaining correct reactivity ratios is a prerequisite for good model predictions. For vinyl acetate (VAc), vinyl 2,2-dimethyl-propanoate also known as vinyl pivalate (VPV), and vinyl 2-ethylhexanoate (V2EH), the reactivity ratios with methyl acrylate (MA) have been determined by means of low conversion bulk polymerization. The mol fraction of MA in the resulting copolymer was determined by ¹H-NMR. Nonlinear optimization on the thus-obtained monomer feed–copolymer composition data resulted in the following sets of reactivity ratios: r_MA = 6.9 ± 1.4 and r_VAc = 0.013 ± 0.02; r_MA = 5.5 ± 1.2 and r_VPV = 0.017 ± 0.035; r_MA = 6.9 ± 2.7 and r_V2EH = 0.093 ± 0.23. As a result of the similar and overlapping reactivity data of the three methyl acrylate–vinyl ester monomer systems, for practical puposes these data can be described with one set of reactivity data. Nonlinear optimization of all monomer feed–copolymer composition data together resulted in r_MA = 6.1 ± 0.6 and r_VEst = 0.0087 ± 0.023. © 1994 John Wiley & Sons, Inc.     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.