Mixed ligand complexes in vinyl polymerization—II: [NN′-ethylenebis(salicylideneiminato)] (benzoylacetonato)cobalt(III) as an initiator

The polymerization of methyl methacrylate initiated by a mixed ligand complex. [NN′-ethylenebis(salicylideneiminato)](benzoylacetonato)cobalt(III) has been studied in bulk and in benzene at 70° and 80°. The rate of polymerization is proportional to (concentration of the chelate)${}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ and the monomer exponent is close to 1.5. The activation energy and the kinetic and transfer constants are evaluated. A free radical mechanism has been proposed.     

Aquachloro[N,N′‐ethylenebis(salicylideneiminato)]manganese(III)

The title compound, aqua­chloro{2,2′‐[1,2‐ethanediyl­bis­(nitrilo­methyl­idyne)]­diphenolato‐κ⁴O,N,N′,O′}manganese(III),[MnCl(C₁₆H₁₄N₂O₂)(H₂O)], is a neutral manganese(III) complex with a pseudo‐octahedral metal centre. The equatorial plane comprises the four donor atoms of the tetradentate Schiff base ligand [Mn—O 1.886 (4) and 1.893 (4) Å, and Mn—N 1.978 (5) and 1.982 (5) Å], with a water mol­ecule [Mn—O 2.383 (4) Å] and a Cl^? ligand [Mn—Cl 2.4680 (16) Å] completing the coordination sphere. The distorted geometry is highlighted by the marked displacement of the Mn^III ion out of the least‐squares plane of the four Schiff base donor atoms by 0.165 (2) Å. These monomeric Mn^III centres are then linked into a polymeric array via hydrogen bonds between the coordinated water mol­ecule and the phenolic O‐atom donors of an adjacent Mn^III centre [O—H?O 2.789 (5) and 2.881 (5) Å].     

Metal chelates in vinyl polymerization. I. Ferric dipivaloylmethide as an initiator

The behavior of the chelate, ferric dipivaloylmethide, Fe(DPM)₃, in vinyl polymerization systems was investigated. The polymerization was found to be of free-radical nature. The rate of polymerization was proportional to the square root of the concentration of the chelate. The monomer exponent was close to 1.5 for the Fe(DPM)₃-initiated polymerization of styrene and methyl methacrylate. The kinetic and transfer constants and activation energies for these systems have been evaluated. Spectral studies revealed the possibility of a complex formation between the chelate and the monomer. A kinetic scheme for the Fe(DPM)₃-initiated polymerization is derived based on this initial complex formation.     

Ferromagnetically coupled heterobinuclear Cu(II)-Ln(III) complexes with N,N′-bis(2-aminoethyl)-oxamido dianion as a bridged ligand

Six novel μ-oxamido heterobinuclear complexes, namely Cu(oxae)Ln(Me₂bpy)₂-(ClO₄)₃ (Ln? La, Nd, Gd, Tb, Ho, Er), where oxae denotes N, N'-bis(2-aminoethyl)oxamido dianion, Me₂bpy is 4,4'-dimethyl-2,2'-bipyridyl, have been synthesized and characterised by elemental analyses, IR, conductivity measurements and electronic spectra. The temperature dependence of the magnetic susceptibility of Cu(oxae)Gd(Me₂bpy)₂(ClO₄)₃ has been measured over the range 4–300 K. The least-squares fit of the experimental susceptibilities yielded J = 1.87 cm^?1. The observed Gd(III)-Cu(II) coupling is ferromagnetic. One plausible mechanism that can cause a ferromagnetic coupling between Gd(III) and Cu(II) is discussed in terms of spin-polarization.     

Copper(II)-lanthanoid(III)-copper(II) trinuclear complexes with N,N′-bis(2-aminopropyl)-oxamido ligand

Six novel μ-oxamido trinuclear complexes, namely Cu₂(oxap)₂Ln(ClO₄)₃ (Ln: La, Pr, Nd, Gd, Yb, Ho), where oxap is N,N′-bis(2-aminopropyl)oxamido, have been synthesized. The complex Cu₂(oxap)₂Gd(ClO₄)₃ was characterized with variable temperature magnetic susceptibility (4—300 K). The exchange integrals J (Cu—Gd) and J′ (Cu–Cu) were found to be 0.83 cm^?1 and ?1.62 cm^?1, indicating that very weakly ferromagnetic spin-exchange interaction operates between Cu(II) and Gd (III) ions.     

(2‐Aminoethanethiolato‐N,S)bis(ethylenediamine‐N,N′)cobalt(III) dinitrate

In the title compound, [Co(C₂H₆NS)(C₂H₈N₂)₂](NO₃)₂, the Co^III atom has a slightly distorted octahedral geometry, coordinated by one 2‐amino­ethane­thiol­ate and two ethyl­enedi­amine ligands. The three five‐membered chelate rings adopt a gauche conformation with the unfavoured (lel)₂(ob) form, which is ascribed to hydrogen bonds between the amine groups in the complex cation and the nitrate counter‐anions [N?O 2.900 (3)–3.378 (3) Å].     

Tris­(ethyl­enedi­amine‐N,N′)cobalt(III) oxalate perchlorate dihydrate

The crystallization behavior of the title compound, [Co(C₂H₈N₂)₃](C₂O₄)(ClO₄)·2H₂O, has been studied in order to evaluate the effect of the counter‐anion on the crystalline structures of [Co(en)₃](C₂O₄)·X (en = ethyl­enedi­amine). Two‐dimensional intermolecular hydrogen‐bonding networks are formed between the amine protons of the [Co(en)₃]³⁺ cations and the O atoms of the oxalate anions. Perchlorate and water mol­ecules fill in the channels between the two‐dimensional networks and form hydrogen‐bonding interactions with the two‐dimensional layers, thus constructing a three‐dimensional hydrogen‐bonding network.     

Cobalt(III) complexes of ethylenediamine-N,N′-di-S-isobutylacetic acid

A new optically active ONNO-type tetradentate ligand, ethylenediamine-N,N′- di-S-isobutylacetate (SS-eniba), has been synthesized. During the preparation of diaqua cobalt(III) complexes of SS-eniba, [Co(SS-eniba)(H₂O)₂]⁺, the title ligand has coordinated stereospecifically to the cobalt(III) ion to give three isomers, Δ-s-cis, Δ-uns-cis and Λ-uns-cis, which have been isolated and characterized via electronic absorption, circular dichroism (CD), and ¹H NMR spectroscopy, along with elemental analysis data. The preparation of Δ-s-cis-[Co(SS-eniba)Cl₂]⁺ and Δ-s-cis-[Co(SS-eniba)CO₃]⁺ are also reported.     

N,N,N′,N′,N″‐penta(methyl acrylate)diethylenetriamine: A novel ligand for atom transfer radical polymerization of methyl methacrylate

A novel ligand, N,N,N′,N′,N″‐penta (methyl acrylate) diethylenetriamine (MA₅‐DETA), was synthesized by the reaction of diethylenetriamine with methyl acrylate in almost quantitive yield. The polymerizations of methyl methacrylate with MA₅‐DETA as the ligand and α,α‐dichlorotoluene (DCT) and ethyl 2‐bromoisobutyrate (2‐EBiB) as the initiators, respectively, under different conditions were examined. The polymerization with CuCl/MA₅‐DETA/DCT was closely controlled in bulk and gave polymers with quite narrow molecular weight distributions (M_w/M_n's) of 1.16–1.29. The polymerization with the system CuBr/MA₅‐DETA/EBiB in bulk gave high activity. However, the system was not well controlled and gave the polymers with M_w/M_n = 1.35–1.53. The solution polymerization in anisole with CuBr/MA₅‐DETA/EBiB showed a better‐controlled nature. Moreover, the addition of CuBr₂ into the aforementioned system can further improve its controllability. The M_w/M_n's of the resulting polymers ranged from 1.11 to 1.21. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1963–1969, 2004     

Thermal intramolecular electron transfer reactions of [N,N′-ethylene-bis(salicylideneaminato)](2,4-pentanedionato)cobalt(III) complexes in the solid state

The title complexes with the formula Co(salen)L where L is a series of 2,4-pentanedionates underwent thermally induced one-electron transfer reactions from L to Co(III). The reaction left behind a stoichiometric amount of the crystalline Co^II(salen) complex which took up oxygen in a molar ratio of Co:O₂ = 2:1. The kinetic analyses showed that the electron transfer reaction rate was apparently dominated by activation entropy rather than by activation enthalpy.     

N,N′-(disubstitutedmethylene)bisacrylamides: Preparation and polymerization

Preparative methods for the previously unreported N,N′-(disubstitutedmethylene)-bisacrylamides are presented. The solubility and thermal stability of these new bisamides are compared to the well known N,N′-methylenebisacrylamide. N,N′-Isopropyl-idenebisacrylamide, one of these new compounds, readily copolymerizes with a variety of vinyl monomers. It forms high molecular weight copolymers by the conjugate polyaddition of alkanedithiols or piperazine.     

Thermodynamic, crystallographic and solvent extraction properties of cobalt(II), nickel(II) and copper(II) complexes of ethylenediamine- N,N,N′,N′-tetraacetanilide

Complexes of ethylenediamine-N,N,N′,N′-tetraacetanilide (edtan, C₃₄H₃₆N₆O₁₄) with cobalt(II), nickel(II) and copper(II) in the solid state and in solution are reported for the first time. Thermodynamic data (stability constant, and derived Gibbs energy, enthalpy and entropy changes)for the 1 : 1 complexation of edtan with the metal ions at 298.15 K in water-saturated butan-1-ol gave the selectivity sequence log₁₀K_s; Ni²⁺, 4.56±0.02; Cu²⁺, 4.41±0.01; Co²⁺, 4.18±0.04 as found from microcalorimetric titration studies. The entropies suggested that the structure of the 1 : 1 complex with copper(II) contains fewer chelate rings than those for nickel(II) and cobalt(II) (δ_cS⁰ : Cu-21.4, Co 5.7, Ni 3.9 J mol⁻¹K⁻¹). Solid complexes of the metal ions with edtan and perchlorate as the counter anion were prepared. For each, a complex with a 1 : 1 metal: edtan stoichiometry with non-coordinated perchlorate was isolated. The X-ray structure of [Cu(edtan)(H₂O)][ClO₄]₂·1.5H₂O (1) revealed a six-coordinate Cu centre with edtan acting as pentadentate ligand (2N, 3O) with the coordination sphere completed by an oxygen atom from water. In striking contrast to the Cu complex, the Co centre in [Co(edtan)(H₂O)][ClO₄]₂·H₂O·0.5C₂H₅OH (2) is seven-coordinate with hexadentate edtan (2N, 4O) and one coordinated water molecule. There is thus an excellent confirmation of the results obtained from the microcalometric study in that edtan forms four chelate rings to Cu but five to Co in the solid state. The ability of the ligand to extract metal ions from water to the water-saturated butan-1-ol phase was assessed from distribution data as a function of the aqueous phase hydrogen ion concentration and of the ligand concentration in the organic phase. The data showed that Cu²⁺ is selectively extracted over a wide range of aqeous phase hydrogen ion concentrations.     

Gold(III) fluorosulfate as an initiator of the polymerization

Gold(III) fluorosulfate was shown to have potential for initiating the polymerization and graft copolymerization of tetrahydrofuran (THF) and similar monomers at room temperature. Addition to THF of either gold(III) fluorosulfate or of gold(III) fluorosulfate and acetyl chloride (a model for a reactive polymer backbone) led to high yields (60–70%) of polytetrahydrofuran. IR, NMR, HPLC, and other studies were used to determine the mechanism of initiation in each case. They showed that in the absence of halide, the gold salt led to hydrogen abstraction from THF and formation of protonic acid, which then initiated polymerization. In the presence of halide, concurrent initiation due to the formation of tertiary oxonium ion by acetylation occurred. Gold(III) chloride precipitated simultaneously.     

Synthesis and magnetic properties of copper (II)-lanthanoid (III) binuclear complexes with N,N′-bis(3-aminopropyl) oxamido ligand

Six novel μ-oxamido binuclear complexes, namely Cu(axpn)Ln(L)₂(ClO₄)₃ (Ln: Eu, Gd, Tb, Nd, Ho, Er), where oxpn is N,N'-bis(3-aminopropyl) oxamido, L denotes 5-nitro,10-phenanthroline (abbreviated as NO₂-phen), have been synthesized and characterised. The magnetic susceptibility of complexes Cu(oxpn)Gd(NO₂-phen)2(ClO₄)₃.2H₂O was measured over the 4–300 K and the observed data were successfully simulated by equation based on spin Hamiltonian operator (H = -2J₁ · S₂), giving the exchange integral J(Cu-Gd)=-1.62 cm^?1. This indicates a weak antiferromagnetic interaction between the Cu(II) and Gd(III) ions.     

Bis[N,N′‐(2‐chlorobenzylidene)ethylenediamine‐κ2N,N′]copper(I) dichloridocuprate(I) acetonitrile solvate

The 1:1 adduct of N,N′‐bis(2‐chlorobenzylidene)ethylenediamine (cb₂en) with copper(I) chloride proves to be an ionic compound with Cu^I‐centred cations and anions, [Cu(C₁₆H₁₄Cl₂N₂)₂][CuCl₂]·CH₃CN. In the cation, the Cu^I atom has a flattened tetrahedral coordination geometry, with a small bite angle for the chelating ligands, which form a double‐helical arrangement around the metal centre. The anion is almost linear, as expected. The packing of the cations involves intermolecular π–π interactions, which lead to columns of translationally related cations along the shortest unit‐cell axis, with anions and solvent molecules in channels between them.