Lactone polymers. VIII. Dynamic mechanical properties of ϵ-caprolactone and γ-(tert-butyl)-ϵ-caprolactone copolymers

The temperature dependencies of dynamic mechanical properties have been determined with a torsional pendulum for copolymers of ?-caprolactone and γ-(tert-butyl)-?-caprolactone over the entire composition range. Copolymers containing at least 25 mol % (33 wt %) of γ-(tert-butyl)-?-caprolactone units are amorphous in nature. The experimentally obtained glass transition temperatures of the copolymers and poly(γ-(tert-butyl)-?-caprolactone) were used to calculate the glass transition temperature of amorphous of poly(?-caprolactone) according to the Fox relation. This value of ?70°C is in excellent agreement with values obtained from similar calculations based on compatible blends of poly(?-caprolactone) with other homopolymers.     

Lactone polymers. III. Polymerization of ε-caprolactone

Polymerization of ε-caprolactone catalyzed by dibutylzine and triisobutylaluminum has been examined. Monomer conversion and polymer molecular weight increase simultaneously during the polymerization suggesting a living polymer system. Also, molecular weight is proportional to the reciprocal of catalyst concentration. However, the polymer molecular weights are three to five times that which would be calculated from the catalyst concentration assuming a living polymer system. In addition, fractionation of poly-ε-caprolactone prepared with dibutylzinc revealed that the distribution is considerably broader than expected for a Poisson distribution. While no mechanistic explanation for the broad molecular weight distribution observed has been defined, examination of the metal alkyl-catalyzed polylactones shows that the molecular weight distributions can and do change with time. This change is due to an ester interchange process occurring subsequent to polymerization. This phenomenon can be used to change the molecular weight distribution from very broad to the most probable distribution.     

Molecular weight distribution in emulsion polymerizations

A mathematical formulation is given which describes the evolution of the number distribution of the molecular weight (MWD) of linear polymer chains that grow in emulsion polymerization systems. The resulting set of coupled ordinary differential equations takes into account the microscopic events of free radical entry, exit, chain annihilation, bimolecular termination (by combination and disproportionation), and chain transfer in a mono- or polydisperse system. Simple analytic solutions are presented for systems in which the number of particles, as well as the average number of free radicals per particle, is constant and in which the rate coefficients are size independent. These solutions indicate that compartmentalization of the free radicals in the latex particles results in a significant increase in the polydispersity of the polymer produced by emulsion polymerization, compared with that in bulk systems. The theory shows that significant mechanistic information may be obtained from experimental MWDs and that, in principle, experimental conditions may be prescribed to grow a desired MWD. The MWDs are presented in a novel manner that facilitates the comparison of theory with experiment.     

Melt block copolymerization of ϵ-caprolactone and L-lactide

AB block copolymers of ϵ-caprolactone and (L )-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ϵ-caprolactone was polymerized first. Ethanol initiated the polymerization of ϵ-caprolactone producing a polymer with ϵ-caprolactone derived hydroxyl end groups which after addition of L -lactide in the second step of the polymerization initiated the ring-opening copolymerization of L -lactide. The number-average molecular weights of the poly(ϵ-caprolactone) blocks varied from 1.5 to 5.2 × 10³, while those of the poly(L -lactide) blocks ranged from 17.4 to 49.7 × 10³. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L -lactide was polymerized first, followed by copolymerization of ϵ-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ϵ-caprolactone derived hydroxyl end groups generated during the copolymerization of ϵ-caprolactone with pre-polymers of L -lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups. © 1997 John Wiley & Sons, Inc.     

Microspheres by dispersion polymerization of lactides and ϵ-caprolactone

Polyester microspheres were synthesized by the ring-opening polymerization of lactides (racemate or optically active L,L-isomer) and ϵ-caprolactone. Polymerizations were carried out in the 1,4-dioxane-heptane mixed solvents in the presence of poly(dodecyl acrylate)-g-poly(ϵ-caprolactone) (poly(DA-CL)) used as surface-active agent. Polymerizations were initiated with tin(II) 2-ethylhexanoate (lactides), diethylaluminum ethoxide or sodium trimethylsilanolate (ϵ-caprolactone). In the studies of the polymerization of lactides, relations were determined between diameters, the distribution of diameters of synthesized microspheres, and the structure of poly(DA-CL). It was found that it is possible, depending on thermal treatment of microspheres after synthesis, to obtain polylactide microspheres differing in the degree of crystallinity. Kinetics of the dispersion pseudoanionic and anionic polymerizations of ϵ-caprolactone were also investigated and the results of these studies were compared with the data for the corresponding polymerizations of ϵ-caprolactone in solution.     

Polymerization of ϵ-caprolactone using heterobimetallic lanthanocene complexes

The chiral heterobimetallic complexes Li[Ln(η⁵ : η¹-C₅R₄¹SiMe₂NCH₂CH₂R²)₂] (Ln = Y, Lu; C₅R₄¹ = C₅Me₄, C₅H₄, 3-C₅H₃ t Bu; R² = OMe, NMe₂; Me: methyl; tBu: tert-butyl) have been found to polymerize ϵ-caprolactone to give a polymer of high molecular weight (M̄_n < 20 000) and moderate polydispersity (M̄_w/M̄_n < 2.0). Failure to observe a correlation between monomer/initiator ratio and molecular weight suggests a polymerization mechanism different from a pseudo-anionic mechanism.     

Controlled polymerization of ϵ-caprolactone -from macromolecules to microspheres

Pseudoanionic polymerization of ϵ-caprolactone (CL), initiated with dialkylaluminum alkoxides, was used for the tailored synthesis of poly(CL) with M̄_n ≤ 100 000 and M̄_w /M̄_n < 1. 20. Macromolecules with functional groups at one or at both ends were obtained in this way. Controlled polymerization of CL allowed to prepare poly(dodecyl acrylate)-g-poly(ϵ-caprolactone) (poly(DAC)-g-poly(CL)) with well defined poly(CL) grafts. These copolymers were used as the surface active agents for the direct synthesis of poly(CL) microspheres. The number average diameter (D̄_n ) of poly(CL) microspheres varied from 0.628 μm to 0.94 μm and the diameter polydispersity (D̄_v /D̄_n ) varied from 1.038 to 1.26, depending on the composition of poly(DAC)-g-poly(CL). Human serum albumin (HSA) and human gamma globulins (_γ G) were attached to the poly(CL) microspheres. The maximal surface concentrations of HSA and _γ G adsorbed onto the microspheres were equal to 9·10⁻⁴ g/m² and 2.0·10⁻³ g/m² respectively.     

Enzymatic polyesterification in organic media. Enzyme-catalyzed synthesis of linear polyesters. I. Condensation polymerization of linear hydroxyesters. II. Ring-opening polymerization of ϵ-caprolactone

With the object to synthesize polyesters by enzymatic catalysis in organic media, two directions have been investigated: (1) the condensation polymerization of linear ω-hydroxyesters and (2) the ring-opening polymerization of lactones. The commercially-available crude porcine pancreatic lipase (PPL), suspended in organic solvents, was the preferred enzyme for the reactions. In order to determine the optimal conditions for the condensation polymerization, the bifunctional methyl 6-hydroxyhexanoate was used as a model compound to study the influence of the following parameters: type of the enzymecatalyst, kind of solvent, concentration, temperature, duration, size of the reaction mixture, and stirring. Film-forming polyesters with a degree of polymerization (DP) up to about 100 were obtained from linear aliphatic hydroxyesters in n-hexane at reflux temperature (69°C). Yet concurrently with the intermolecular condensation polymerization, macrolactones were also formed by intramolecular reaction. Two aromatic hydroxyesters did not react under these conditions. For the ring-opening polymerization of lactones the reaction of ?-caprolactone with methanol as the preferred nucleophile, was studied. Polyesters with a DP of up to 35 were obtained in n-hexane at temperatures between 25 and 40°C. The degrees of polymerization of the polyesters were determined by comparative analyses of the end groups in the ¹H-NMR spectra and by determination of molecular weights either by vapor phase osmometry, gel permeation chromatography, or intrinsic viscosity. © 1993 John Wiley & Sons, Inc.     

Cationic polymerization of ϵ-caprolactone in the presence of diols via activated monomer mechanism

The kinetics of noncatalytic and catalytic interaction of ϵ-caprolactone (ϵ-CL) with a variety of diols in the presence of onium-type catalysts as well as the resulting products structure were investigated. The phenomenon of the direction change of the lactone ring opening during the interaction with hydroxyl-containing compounds of different functionality was discovered. The features of the reactions investigated were discussed and their kinetic parameters were determined.     

Molecular weights and molecular weight distribution of polymers by equilibrium ultracentrifugation. Part II. Molecular weight distribution

A method has been developed for determining the molecular weight distribution of a polymer sample from the sedimentation–diffusion equilibrium data for a solution under pseudo-ideal conditions. From some theoretical examples it appears that the method works well and that the molecular weight distribution can be determined with a reasonable degree of resolution. From three polymer samples (polyethylene, polystyrene, and polycaprolactam) the molecular weight distribution was determined in this way. The average molecular weights, M?_n, M?_w, M?_z, and M _z+1, calculated from these distribution functions agree well with those calculated directly from the equilibrium data.     

Polymer–monomer binary mixtures. I. Eutectic and epitaxial crystallization in poly(ϵ-caprolactone)–trioxane mixtures

Binary mixtures of a linear polyester (poly(?-caprolactone)) and a crystallizable monomer (trioxane) have been investigated by means of differential scanning calorimetry and optical and electron microscopy. The phase diagram indicates the existence of a eutectic at a temperature T_mE = 314°K and for a polymer volume fraction ?_2E = 0.70, values close to those predicated by the Flory–Huggins theory (using χ = 0.3). Microscopic studies reveal unusual morphologies: (1) In hypoeutectic mixtures, at room temperature, the solvent crystallizes as highly ramified or branched needles. When the remaining melt reaches the eutectic composition, transcrystallization of the polymer is induced by the epitaxial deposition (as established by electron diffraction) of polycaprolactone on the existing trioxane crystals, and leads to highly ordered structures. (2) In hypereutectic mixtures a predominantly spherulitic texture is observed. Blends of trioxane and several other linear polyesters are found to exhibit similar behavior.     

Soluble bimetallic μ-oxoalkoxides. IX. ε-caprolactone and β-propiolactone block copolymerization

The fast and living ring-opening polymerization of lactones by bimetallic μ-oxoalkoxides in homogeneous organic phase has led to successful block copolymerization. The catalyst is coordinatively associated in organic media; however, interaction with lactones can induce, following their nature, different rearrangements of the catalytic aggregates, depending on the nature of these lactones. Consequently, ε-caprolactone and β-propiolactone block copolymers are quantitatively obtained only in the presence of a completely dissociated catalyst.     

Fourier-transform infrared studies of polymer blends. II. Poly(ϵ-caprolactone)–poly(vinyl chloride) system

Fourier-transform infrared (FTIR) studies of the poly(?-caprolactone) (PCL)–poly(vinyl chloride) (PVC) blend system are presented. The results indicate that there are specific interactions between the PCL and PVC in both the molten and solid states which could be responsible for the apparent compatibility of the amorphous component of these blends. Additionally, FTIR difference spectra are presented to illustrate the potential of this technique for following the kinetics of crystallinity in polymer blend systems.     

Molecular weight distribution in radiation-induced polymerization. I. γ-radiation-induced free-radical polymerization of liquid styrene

The kinetics of γ-radiation-induced free-radical polymerization of styrene were studied over the temperature range 0–50°C at radiation intensities of 9.5 × 10⁴, 3.1 × 10⁵, 4.0 × 10⁵, and 1.0 × 10⁶ rad/hr. The overall rate of polymerization was found to be proportional to the 0.44–0.49 power of radiation intensity, and the overall activation energy for the radiation-induced free-radical polymerization of styrene was 6.0–6.3 kcal/mole. Values of the kinetic constants, k_p²/k_t and k_trm/k_p, were calculated from the overall polymerization rates and the number-average molecular weights. Gelpermeation chromatography was used to determine the number-average molecular weight M?_n, the weight-average molecular weight M?_w, and the polydispersity ratio M?_w/M?_n, of the product polystyrene. The polydispersity ratios of the radiation-polymerized polystyrene were found to lie between 1.80 and 2.00. Significant differences were observed in the polydispersity ratios of chemically initiated and radiation-induced polystyrenes. The radiation chemical yield, G(styrene), was calculated to be 0.5–0.8.     

Molecular weight distribution studies. I. Radiation-induced polymerization of liquid α-methylstyrene

The concentration of water in purified and BaO-dried α-methylstyrene was found to be 1.1 × 10^?4M. The radiation-induced bulk polymerization of the α-methylstyrene thus prepared was studied in the temperature range of ?20°C to 35°C. The polymerization rate varied as the 0.55 power of the dose rate. The theoretical molecular weights and molecular weight distribution were calculated from a proposed kinetic scheme and these values were then compared with those found experimentally. The agreement between these two was reasonably close, and therefore it was concluded that, from the molecular weight distribution point of view, the proposed kinetic scheme for the cationic polymerization of α-methylstyrene is an acceptable one. The rate constant for chain transfer to monomer k_f changed with temperature and was found to be responsible for the decrease in the molecular weight of the polymer with increase in temperature. k_f and k_p at 20°C were found to be 0.95 × 10⁴ l./mole-sec and 0.99 × 10⁶ l./mole-sec, respectively.     

Molecular weight distributions in radiation-induced polymerization. III. γ-Ray-induced polymerization of styrene at low temperatures

The kinetics of the γ-radiation-induced polymerization of styrene was studied at radiation intensities of 8 × 10⁴, 2.4 × 10⁵, 3.1 × 10⁵, and 8.3 × 10⁵ rad/hr over a temperature range of ?10°C to 30°C. The water content of the irradiated samples varied from 1.0 × 10^?3 to 7.5 × 10^?3 mole/l. The power dependence of the rate of polymerization on the dose rate at ?10°C varied from 0.53 to 0.71 as the water content of the sample varied from 7.5 × 10^?3 to 1.0 × 10^?3 mole/l. A value of 3.1 kcal/mole was determined for the overall activation energy. Molecular weight distribution studies by gel-permeation chromatography indicated the presence of two distinct peaks. The contribution of each peak was dependent on specific experimental parameters. Kinetic data and molecular weight distribution data indicate the coexistence of two propagating species. Analysis of the data strongly suggests that a free-radical mechanism and a cationic mechanism are involved.     

Synthesis and characterization of poly(ϵ-caprolactone)-poly(ethylene glycol) block copolymer

Poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone) triblock copolymers (PECL) covering a wide range of poly(ethylene glycol) (PEG) lengths were synthesized with alkali metal alkoxide derivatives of poly(ethylene glycol). The effects of various factors, such as amount of the initiator, reaction time and temperature, polarity of solvent, length of PEG segment, and counterion on the polymerization were investigated. The copolymers were characterized by ¹H-NMR, IR, GPC, and DSC. It was found that THF system is superior to toluene system. The conversion of the monomer increased with increase of the initiator concentration. High molecular weight of the copolymer and high conversion of the monomer was obtained at below 30°C within 5 min. The polymerization process was studied by GPC and the coexistence of propagation and transesterification reaction was found, which leaded to relatively broad molecular weight distribution of the copolymers. © 1997 John Wiley & Sons, Inc.     

Anionic polymerization of lactones initiated by alkali graphitides. I. Polymerization of ϵ-caprolactone initiated by KC24

The influence of the reaction conditions (time, temperature, concentrations of the monomer, and the initiator) on the amount and composition of the oligomers and high molecular products formed during the heterogeneous anionic polymerization of ?-caprolactone was investigated. The polymerization was initiated by KC₂₄ in xylene or tetrahydrofuran. Conditions were found under which intra- and intermolecular transesterification was strongly suppressed, thus providing the opportunity for the formation of polyesters with viscometric molecular masses of more than 300,000 and good yields (80% and higher). The total quantity of products with a viscometric molecular mass below 2500 did not exceed 15%; that of the cyclic dimer was not in excess of 5%. Peculiar features of the KC₂₄ initiated polymerization are the insignificant rise in the number of oligomers and the formation of high polymers even in strongly diluted solutions of ?-caprolactone (0.2 mol/L and lower). The quantity and molecular mass of the polymers obtained decreased as the temperature increased. It was also established that the polymerization of the cyclic dimer of ?-caprolactone is not initiated by KC₂₄.     

Polymerization of glycolide promoted by ω-Al-alkoxide poly(ϵ-caprolactone) macro-initiators and formation of stable colloidal dispersions

Block polymerization of glycolide (GA) and ϵ-caprolactone (ϵ-CL) has been initiated with aluminum alkoxides, such as Al(OⁱPr)₃ and Et₂AlOCH₂X (where X = -CH₂-Br and -CH₂O-C(O)-C(Me)=CH₂), in THF at 40°C. Structure and composition of block copolyesters have been characterized with respect to the molecular weight by NMR spectroscopy and thermal analysis. Copolymerization is typically living, so that block copolyesters have been synthesized with predictable molecular weight and composition. The inherent insolubility of polyglycolide block is responsible for the heterogeneity of the polymerization medium and formation of stable, non-aqueous colloidal dispersions. This effect is especially pronounced at high GA/ϵ-CL molar ratios. Colloidal dispersions have been analyzed by transmission electron microscopy (TEM) and photocorrelation spectroscopy (PCS).