Characterisation of pitch by HPLC

Summary A new high performance liquid chromatography method for the characterisation of toluene-soluble fractions of pitches has been developed. Although a chromatographic system typical of size exclusion chromatography was used, results indicate that, for these structurally complex samples, separation does not follow the usual discrimination by molecular size. A differentiation between several classes of polyaromatic hydrocarbons is achieved instead. Data are reported on the analysis of individual standard polyaromatic hydrocarbons, showing that four different elution ranges can be observed: three ofcata-condensed compounds (Cata1, Cata2 and Cata3) and one ofperi-condensed compounds (Peri). Results are reported proving the capacity of this high performance liquid chromatography method to distinguish between pitches of different origin and nature. It is also effective for the study of the chemical reactions occurring during heat treatment.     

Determination of oxygen and nitrogen derivatives of polycyclic aromatic hydrocarbons in fractions of asphalt mixtures using liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization

Liquid chromatography coupled to mass spectrometry with atmospheric pressure chemical ionization was used for the determination of polycyclic aromatic hydrocarbon derivatives, the oxygenated polycyclic aromatic hydrocarbons and nitrated polycyclic aromatic hydrocarbons, formed in asphalt fractions. Two different methods have been developed for the determination of five oxygenated and seven nitrated polycyclic aromatic hydrocarbons that are characterized by having two or more condensed aromatic rings and present mutagenic and carcinogenic properties. The parameters of the atmospheric pressure chemical ionization interface were optimized to obtain the highest possible sensitivity for all compounds. The detection limits of the methods ranged from 0.1 to 57.3 μg/L for nitrated and from 0.1 to 6.6 μg/L for oxygenated derivatives. The limits of quantification were in the range of 4.6–191 μg/L for nitrated and 0.3–8.9 μg/L for oxygenated derivatives. The methods were validated against a diesel particulate extract standard reference material (National Institute of Standards and Technology SRM 1975), and the obtained concentrations (two nitrated derivatives) agreed with the certified values. The methods were applied in the analysis of asphalt samples after their fractionation into asphaltenes and maltenes, according to American Society for Testing and Material D4124, where the maltenic fraction was further separated into its basic, acidic, and neutral parts following the method of Green. Only two nitrated derivatives were found in the asphalt sample, quinoline and 2‐nitrofluorene, with concentrations of 9.26 and 2146 mg/kg, respectively, whereas no oxygenated derivatives were detected.     

Determination of nitrated-polyaromatic hydrocarbons (nitro-PAHs) in environmental samples by high resolution chromatographic techniques

An analytical procedure is described for the fractionation of organic compounds present in environmental samples and the determination of nitro polyaromatic hydrocarbons (nitro-PAHs). Both low and high resolution liquid chromatography are employed for the prefractionation of the soluble organic fraction (SOF) extracted from particulate matter or gaseous pollutants collected on adsorption traps. High resolution gas chromatography is used to analyze four fractions containing alkanes, PAHs, nitro-PAHs, and other polar PAHs. Nitrogen-containing species are separated by GC and detected specifically using an alkali flame (NPD) detector. Flame ionization (FID) detection, GC-MS of positive ions, and negative ion chemical ionization MS of the whole fraction is used for the identification and quantitation of the various components. The composition of SOF extracted from particulate matter emitted from diesel exhausts is elucidated and a large number of nitro-PAHs identified by the combination of the various techniques.     

Analysis of nitrated polycyclic aromatic hydrocarbons by glass capillary gas chromatography using different detectors

Glass capillary gas chromatography has been investigated as a method for the analysis of nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using both splitless and on-column injection techniques. The nitro-PAH showed good chromatographic performance and thermal stability under the GC conditions used. Retention times and response factors of several nitro-PAH were compared to those of conventional PAH. Simultaneous flame ionization and thermionic nitrogen selective detection was used to facilitate identification of nitro-PAH in complex samples. The feasibility of the method is demonstrated on two samples of commercial carbon black. Besides 1-nitropyrene several isomeric dinitropyrenes have been identified.     

Packed column SFC of gas oils part I: Hydrocarbon group separation using pure carbon dioxide

In this paper, the critical application of the ASTM method to hydrocarbon group separation in gas oils using conventional packed column SFC coupled to FID is described. Resolution of model compounds is studied using a recent commercial apparatus and the chromatographic conditions such as pressure, temperature, and density of the mobile phase and the nature of the stationary phase after FID detection conditions have been selected to give the best sensitivity. Three gas oils differing in composition (ratio arimatic/non-aromatic hydrocarbons)have been selected to evaluate the method for separation of the non-aromatic hydrocarbon group from mono-, di-, and polyaromatic hydrocarbons groups (sub-aromatic groups). The ASTM requiements for this analysis are very easy to obtain in adsorption chromatography. However, in adsorption or normal phase chromatography, SFC results cannot be perfect either for the quantification of aromatic and non-aromatic hydrocarbon fractions because there is still an overlap between the two groups (the separation is better in adsorption chromatography than in normal phase chromatography) or for sub-aromatic fractionation (the separation is better in normal phase chromatography than in adsorption chromatography); combination of both separation techniques only improves the sub-aromatic group fractionation. Thus, further enhancement of resolution for group and sub-group separation is needed.     

Selective determination of substituted PAH in aerosols using liquid CO2-extraction,HPLC prefractionation on chemically activated silica,and HRGC combined with negative ion mass spectrometry

A method is described which allows the determination of different substituted polycyclic aromatic hydrocarbons (PAH) such as NO₂-PAH, carbazoles, keto-PAH, and aza-arenes in aerosol samples. Liquid CO₂-extraction is used to minimize the loss of reactive compounds. High performance liquid chromatography on chemically activated silica is employed to prefractionate the samples into subfractions with a minimum of overlap between different PAH compound classes. Both electron capture detection and negative ion chemical ionization combined with capillary gas chromatography are used for identification and quantification. The latter method also allows distinction between isomers with different toxic properties when N₂O/CH₄ reaction gas mixtures are used. Selectivity for tetrachlorodibenzo-p-dioxins as against pesticides and polychlorinated biphenyls can be improved by this technique. The applicability of the method is critically discussed and different examples are given.     

Determination of nitro-polycyclic aromatic hydrocarbons in atmospheric aerosols using HPLC fluorescence with a post-column derivatisation technique

The objective of this study was to develop an efficient and sensitive analytical protocol for the determination of nitrated polycyclic aromatic hydrocarbons (NPAHs) in aerosol samples. The separation of 16 NPAH (mono-and dinitro-PAH) was achieved by reversed-phase high-performance liquid chromatography (HPLC) followed by on-line reduction of the NPAHs to their corresponding amino polycyclic aromatic hydrocarbons (APAHs) and quantification by fluorescence detection. The main factors affecting the on-line reduction efficiency, such as the flow rate, the temperature, the position and packing of the reduction column were evaluated and optimised. The optimal conditions obtained were: packing of the reduction column with Pt-Al(2)O(3); a reduction column oven temperature of 90 degrees C; a flow rate of 0.8 mL min(-1). The resulting detection limits of the method ranged between 0.06 (2 NN) and 1.25 microg L(-1) (1.8 DNN), with an uncertainty of about 6%. The lifetime of the reduction column was identical to that of a typical analytical column. This analytical method was applied to particulate matter samples collected during December 2005 and August 2006 in Strasbourg (Alsace, eastern France). The NPAH concentrations observed for this urban site showed that the compounds are more abundant during winter (average of 534 pg m(-3)) than during summer (average of 118 pg m(-3)). 1-Nitropyrene was the predominant NPAH species, independent of season.     

New stationary phases for normal-phase high-performance liquid chromatography (NP-HPLC)

3-(2,3-Dihydroxy-propoxy)-propyl-silica (diolsilica) was modified to bonded stationary phases for normal-phase high-performance liquid chromatography (NPLC) carrying phosphorous ester, boronic ester, and nitric acid ester groups. The NPLC phases were investigated with respect to their properties towards separations of polyaromatic hydrocarbons, and chlorinated and nitrated environmental pollutants. Aminopropyl-silica and nitrooxy-propyl-silica (the latter synthesized in our working group) are presented for comparison. Depending on the functionality used for the modification the retention behavior can significantly be changed towards the three analyte classes. Especially 2,2,2-tribromoethyl-phosphoromorpholino-chloridate modified diol-silica, 2,2,2-tribromoethyl-dichlorophosphate modified diol-silica and nitrated diol-silica (nitrooxy-propoxypropyl-silica) show specific properties for the separation of polyaromatic hydrocarbons, chlorinated analytes and nitrated analytes. Preparation and packing of the adsorbents are described. Principal Component Analysis (PCA) is used as a chemometric tool for effective data reduction and visualization of the results in terms of retention behavior of the stationary phases. Received: 4 August 1997 / Revised: 3 December 1997 / Accepted: 7 December 1997     

Development of a sequential supercritical fluid extraction method for the analysis of nitrated and oxygenated derivatives of polycyclic aromatic hydrocarbons in urban aerosols

A two-step supercritical fluid extraction (SFE) method has been developed for the analysis of oxygenated and nitrated polycyclic aromatic hydrocarbons (oxy- and nitro-PAHs, respectively) present in urban aerosol samples. The proposed SFE procedure first involves an extraction step using pure CO2 in order to remove the less polar compounds from the matrix and a second consecutive step using toluene-modified CO2. The oxy- and nitro-PAHs are obtained in the second step. Parameters affecting both collection efficiencies and the selective extraction of oxy- and nitro-PAHs in the second SFE step were optimised. Analysis of the extracts was performed using gas chromatography with electron-capture detection and coupled to mass spectrometry. The proposed SFE method was compared with a conventional extraction technique such as sonication and good agreement in the results was obtained. Nevertheless, clean up of sonication extracts was needed, whereas no purification was necessary for SFE extracts. The SFE method was applied to the analysis of oxy- and nitro-PAHs in urban aerosol samples and 9-fluorenone, 9,10-anthraquinone, 2-methyl-9,10-anthraquinone, benzanthrone, benz[a]anthracene-7,12-dione and 1-nitropyrene were identified at concentrations ranging between 15 and 364 pg m(-3).     

Determination of polynuclear aromatic hydrocarbons in environmental samples by Micellar liquid chromatography

A method for the separation of polycyclic aromatic hydrocarbons (PAHs) by high-performance liquid chromatography using a hybrid micellar mobile phase is described. The detection of PAHs was carried out using the fluorescence method with programmable excitation and emission wavelength. The method is applied to the analysis of several environmental samples (sea water, sediments, limpets, sea worms) and several of these compounds are quantitated at concentration below 70 ng L⁻¹(kg⁻¹) in the original samples.     

Investigation of sulphur compounds in coal tar using monodimensional and comprehensive two-dimensional gas chromatography

Coal is a non renewable fossil fuel, used mainly as a source of electrical energy and in the production of coke. It is subjected to thermal treatment, pyrolysis, which produces coke as a main product, in addition to a condensed liquid by-product, called tar. Tar is a complex mixture of organic compounds which contains different chemical classes, presenting aromatic and sulphur heterocyclic compounds. In general, identification of these compounds requires steps of isolation and fractionation, mainly due to co-elution of these compounds with polyaromatic hydrocarbons (PAH). The objective of this work is to characterize the sulphur compounds present in the coal tar obtained via pyrolysis, using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). Coal samples from the State of Paraná, Brazil were subjected to laboratorial scale pyrolysis. Several experimental conditions were tested, such as sample weight (5, 10 and 15g), heating ramp (10, 25 and 100°C/min) and final temperature (500, 700 and 900°C). Samples were analyzed by one dimensional gas chromatography (1D-GC) coupled to a quadrupole mass spectrometry detector (GC/qMS) and two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). The higher amount of sulphur compounds was obtained at a final temperature of 700°C and a heating ramp of 100°C/min. The main classes observed in the color plot were thiophenes, benzothiophenes and alkylated dibenzothiophenes. GC×GC/TOFMS allowed the identification of the greater number of compounds and the separation of several sulphur compounds from one another. Moreover, separation of sulphur compounds from polyaromatic hydrocarbons and phenols was achieved, which was not possible by 1D-GC. Comparing GC×GC/TOFMS and 1D-GC (SIM mode) also showed that 1D-GC, one of the most employed quantification tools for sulphur compounds, can be misleading for detection, identification and quantification, as the number of isomers of sulphur compounds found was greater than theoretically possible.     

Quantitative determination of 15 bioactive triterpenoid saponins in different parts of Acanthopanax henryi by HPLC with charged aerosol detection and confirmation by LC–ESI‐TOF‐MS

Triterpenoid saponins are difficult to analyze using high‐performance liquid chromatography coupled to UV/vis spectrophotometry due to their lack of chromophores. This study describes the first analytical method for the determination of 15 triterpenoid saponins from the leaves, stems, root bark, and fruits of Acanthopanax henryi, using a high‐performance liquid chromatography with charged aerosol detection coupled with electrospray ionization mass spectrometry method. The separation was carried out on a Kinetex XB‐C18 column with an acetonitrile/water gradient as the mobile phase, followed by charged aerosol detection. The operating conditions of charged aerosol detection were set at 24 kPa for nitrogen pressure and 100 pA for the detection range. Liquid chromatography with electrospray ionization mass spectrometry is described for the identification of compounds in plant samples. The electrospray ionization mass spectrometry method involved the use of the [M + Na]⁺ and [M + NH₄]⁺ ions for compounds 1 – 15 in the positive ion mode with an extracted ion chromatogram. The developed method was fully validated in terms of linearity, sensitivity, precision, repeatability, and recovery, then subsequently applied to evaluate the quality of A. henryi.     

Structure-type separation of diesel fuels by solid phase extraction and identification of the two- and three-ring aromatics by capillary GC-mass spectrometry

A simple and effective solid phase extraction (SPE) method using silica gel micro glass columns has been developed for the separation of diesel fuel into groups of aliphatic, and mono-, di- and polyaromatic hydrocarbons. It is based on a stepwise gradient of dichloromethane in n-pentane. The resulting fractions were analyzed by capillary gas chromatography with a flame ionization detector and coupled gas chromatography-mass spectrometry. Commercially available standards, and retention indices and mass spectra were used for identification of individual aromatic compounds. The principal polycyclic aromatic hydrocarbons (PAHs) in diesel fuel are naphthalene, biphenyl, fluorene, phen-anthrene and their alkylated derivatives. Sulfur-containing PAHs are mainly represented by methyl-substituted dibenzo-thiophenes.     

Analysis of nitrated polycyclic aromatic hydrocarbons by liquid chromatography with fluorescence and mass spectrometry detection: air particulate matter, soot, and reaction product studies

Polycyclic aromatic hydrocarbons (PAH) and their nitrated derivatives (nitro-PAH) are environmental pollutants which pose a threat to human health even at low concentration levels. In this study, efficient analytical methods for the analysis of nitro-PAH and PAH (extraction, clean-up, chromatographic separation, and spectrometric detection) have been developed, characterized, and applied to aerosol samples. The separation and quantification of 12 nitro-PAH was carried out by reversed-phase high performance liquid chromatography (HPLC), on-line reduction, and fluorescence detection. The detection limits were in the range of 0.03–0.5 g L^–1 (6–100 pg in the investigated sample aliquots), and the recovery rates from soot samples were 70–90%. Nitro-PAH and PAH concentrations have been determined for different types of soot and for urban, rural, and alpine fine air particulate matter (PM2.5). For the first time, trace amounts of nitro-PAH have been detected in a high-alpine clean air environment. The on-line reduction and fluorescence technique has been complemented by atmospheric pressure chemical ionization time-of-flight mass spectrometry (APCI-TOF-MS). The MS detection allowed the analysis of partially nitrated and oxygenated PAH in laboratory studies of the heterogeneous reaction of PAH on soot and glass fiber substrates with gaseous nitrogen oxides and ozone. It led to the tentative identification of a previously unknown nitrated derivative of the particularly toxic PAH benzo[a]pyrene (BaP-nitroquinone), and provides the first experimental evidence that PAH-nitroquinones can be formed by reaction of PAH with atmospheric photooxidants.     

Palladium(II) chemically bonded to silica surface applied to the separation and identification of polycyclic aromatic sulfur heterocycles in heavy oil

Separation of polycyclic aromatic sulfur heterocycles among themselves and also from interferents in petrochemical matrices is a challenging task because of their low concentration, matrix complexity, and also due to the presence of polyaromatic hydrocarbons, as they present similar physico‐chemical properties. Therefore, the objective of this work was preparation, characterization, and application of a stationary phase for separation of these compounds in a heavy gas oil sample and their identification by comprehensive two‐dimensional gas chromatography. The stationary phase was prepared by grafting mercaptopropyltrimethoxisilane onto a silica surface, followed by palladium(II) chloride immobilization. Elemental analysis, thermogravimetry, nitrogen adsorption‐desorption isotherms, infrared analysis, and scanning electron microscopy were performed to characterize this solid phase. Sulfur compounds were separated in an open column packed with the stationary phase and analyzed by comprehensive two‐dimensional gas chromatography coupled to time‐of‐flight mass spectrometric detection. The number of compounds tentatively identified was 314 and their classes were thiophenes, benzotiophenes, dibenzothiophenes, naphthothiophenes, benzonaphthothiophenes, and dinaphthothiophenes. Separation among sulfur compounds and polyaromatic hydrocarbons was successful, which is a difficult goal to achieve with the traditionally employed solid phases. Some recalcitrant compounds (dibenzothiophenes with substituents of two and four carbons) were fully separated and tentatively identified.     

Separation of the mineral oil aromatic hydrocarbons of three and more aromatic rings from those of one or two aromatic rings

An analytical method was developed for the quantitation of the mineral oil aromatic hydrocarbons in cosmetic raw materials separating those of one or two aromatic rings from those of three and more aromatic rings. Normal phase high performance liquid chromatography was used with donor‐acceptor complex chromatography. The composition of both fractions and the quantities of respective compounds were determined by comprehensive two dimensional gas chromatography with time of flight mass spectrometry and by liquid chromatography coupled to gas chromatography with flame ionization detection.     

Molecularly imprinted solid‐phase extraction coupled with ultra high performance liquid chromatography and fluorescence detection for the determination of estrogens and their metabolites in wastewater

Estrogens are an important class of endocrine‐disrupting compounds, and their contamination of environmental waters through the effluents of wastewater treatment plants could have an important impact on aquatic biota, even at low concentrations. For this reason, the development of selective and sensitive extraction methodologies, which permit the identification and quantification of these compounds at trace level concentrations, is very important. In this study, a quantitative method based on molecularly imprinted solid phase extraction coupled to ultra high performance liquid chromatography with fluorescence detection has been developed. It has been used for the simultaneous determination of three estrogens and two of their metabolites in water samples from wastewater treatment plants. The method developed presents satisfactory limits of detection (between 0.18 and 0.45 ng·mL^?1), good recoveries (higher than 60%) and low relative standard deviations (under 10%). The method was used to analyze wastewater from a veterinary hospital as well as influent and effluent samples of a wastewater treatment plant of Gran Canaria (Spain) The concentrations of the detected hormones ranged from 1.35 to 2.57 ng·mL^?1.     

Water CI+, a new selective and highly sensitive method for the detection of environmental components using ion trap mass spectrometers

A new method for mass spectrometric trace analysis using an ion trap detector is presented based on chemical ionization with water as a reactant. The technique has advantages over the methods commonly used with regard to selectivity and detection limit and it facilitates the detection of unstable organic compounds. Specific applications in the trace analysis of polyaromatic hydrocarbons, trinitroaromatics as well as glycols and their derivatives are described.     

Water CI+, a new selective and highly sensitive method for the detection of environmental components using ion trap mass spectrometers

A new method for mass spectrometric trace analysis using an ion trap detector is presented based on chemical ionization with water as a reactant. The technique has advantages over the methods commonly used with regard to selectivity and detection limit and it facilitates the detection of unstable organic compounds. Specific applications in the trace analysis of polyaromatic hydrocarbons, trinitroaromatics as well as glycols and their derivatives are described.     

Determination of organic compounds from wood combustion aerosol nanoparticles by different gas chromatographic systems and by aerosol mass spectrometry

Organic compounds in atmospheric nanoparticles have an effect on human health and the climate. The determination of these particles is challenged by the difficulty of sampling, the complexity of sample composition, and the trace-level concentrations of the compounds. Meeting the challenge requires the development of sophisticated sampling systems for size-resolved particles and the optimization of sensitive, accurate and simple analytical techniques and methods. A new sampling system is proposed where particles are charged with a bipolar charger and size-segregated with a differential mobility analyzer. This system was successfully used to sample particles from wood pyrolysis with particle sizes 30–100 nm. Particles were analyzed by four techniques: comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry, gas chromatography–time-of-flight mass spectrometry, gas chromatography–quadrupole mass spectrometry, and aerosol mass spectrometry (aerosol MS). In the chromatographic techniques, particles were collected on a filter and analyzed off-line after sample preparation, whereas in the aerosol MS, particle analysis was performed directly from the particle source. Target compounds of the samples were polyaromatic hydrocarbons and n-alkanes. The analytical techniques were compared and their advantages and disadvantages were evaluated. The sampling system operated well and target compounds were identified in low concentrations.