Synthesis,Characterization, and Reactivity Ratios of Phenyl Methacrylate-N-vinyl-2-pyrrolidone Copolymers

Free radical solution copolymerization of phenyl methacrylate and N-vinyl-2-pyrrolidone was carried out using benzoyl peroxide in 2-butanone solution at 70°C. The composition of the copolymer was determined using ¹H-NMR spectra by comparing the intensities of aromatic protons to that of total protons. The results were used to calculaie the copolymerization reactivity ratios by both the Fineman-Ross (F-R) and Kelen-Tüdös (K-T) methods. The reactivity ratios are r ₁ = 4.49 ± 1.27 and r ₂ = 0.05 ± 0.09 as determined by the K-T method. These values are in good agreement with those determined by the F-R method. The FT-infrared and ¹³C-NMR spectra of the copolymer are discussed.     

Study of molecular motion of block copolymers in solution by high-resolution proton magnetic resonance

Molecular motions of hydrophobic–hydrophilic water-soluble block copolymers in solution were investigated by high-resolution proton magnetic resonance (NMR). Samples studied include block copolymers of polystyrene–poly(ethylene oxide), polybutadiene–poly(ethylene oxide), and poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide). NMR measurements were carried out varying molecular weight, temperature, and solvent composition. For AB copolymers of polystyrene and poly(ethylene oxide), two peaks caused by the phenyl protons of low-molecular-weight (M?_n = 3,300) copolymer were clearly resolved in D₂O at 100°C, but the phenyl proton peaks of high-molecular-weight (M?_n = 13,500 and 36,000) copolymers were too broad to observe in the same solvent, even at 100°C. It is concluded that polystyrene blocks are more mobile in low-molecular-weight copolymer in water than in high-molecular-weight copolymer in the same solvent because the molecular weight of the polystyrene block of the low-molecular-weight copolymer is itself small. In the mixed solvent D₂O and deuterated tetrahydrofuran (THF-d₈), two peaks caused by the phenyl protons of the high-molecular-weight (M?_n = 36,000) copolymer were clearly resolved at 67°C. It is thought that the molecular motions of the polystyrene blocks are activated by the interaction between these blocks and THF in the mixed solvent.     

Living Carbocationic Copolymerizations. V. Synthesis of Isobutylene/p-Methylstyrene Copolymers with the Constant Copolymer Composition Technique in the Leidenfrost Reactor

Abstract

Living copolymerization of the isobutylene (IB)-p-methylstyrene (pMeSt) monomer pair in combination with the constant copolymer composition (CCC) technique produces high molecular weight ( M _n ≈ 100,000 g·mol^?1) and narrow molecular weight distribution ( M _w/ M _n ≈ 1.45) compositionally uniform IB/pMeSt copolymer molecules in the industrially important IB/pMeSt = 97–99/3–1 mol% composition range. Syntheses were carried out with TiCl₄ coinitiator in n-butyl chloride homogeneous solution at ?85°C by the use of the Leidenfrost reactor (i.e., by direct cooling of the charge with liquid nitrogen). In order to carry out the CCC technique it was necessary to obtain reliable copolymerization reactivity ratios. These investigations led to r_IB = 0.5 ± 0.1 and r _pMeSt = 10 ± 4. The attainment of CCC and living copolymerization conditions has been quantitatively demonstrated by dedicated diagnostic plots. Specifically, the attainment of CCC conditions was proven by the analysis of composite rate plots (comonomers input and corresponding copolymer formed versus time) and composition plots (comonomer composition in feed and copolymer formed versus weight of copolymer formed, W _p), and living copolymerization was proven by linearly ascending number-average molecular weight of copolymer ( M _n) versus W _p plots starting at the origin.     

A Transformable and Bulky Methacrylate Monomer That Enables the Synthesis of an MMA-nBA Alternating Copolymer: Sequence-Dependent Self-Healing Properties

In this study, we designed a methacrylate molecule with an alkyl-substituted trichloro salicylic acid pendant as a transformable bulky monomer to enable the synthesis of an alternating copolymer of methyl methacrylate (MMA) and n-butyl acrylate (nBA). The adamantyl-substituted methacrylate monomer ( 1-Ad ) showed very low homopolymerization propensity in radical polymerizations, but afforded the alternating copolymer with nBA via copolymerization. The 1-Ad units in the resultant copolymer were quantitatively and selectively transformed into MMA via transesterification with methanol to yield the alternating copolymer of MMA and nBA. Its alternating sequence was clearly demonstrated by a structural analysis via ¹³C NMR spectroscopy as well as the low reactivity ratios for the 1-Ad and nBA pair. Finally, we verified the superior self-healing ability of the alternating copolymer compared to that of the corresponding 1 : 1 statistical copolymer.     

SYNTHESIS AND POLYMERIZATION OF α-METHACRYLYOXYLETHYLOXYCARBONYLMETHYL-ω-(N,N-DIETHYLDITHIOCARBAMYL)POLYSTYRENE MACROMONOMERS

Polystyrene macromonomers with different molecular weight were prepared by radical polymerization of styrene(St) in benzene using β-methacryloxylethyl 2-N,N-diethyldithiocarbamylacetate (MAEDCA) as a monomer-iniferter.Characterization of the macromonomer by ~1H-NMR showed that the end groups were α-methacrylyoxylethyloxycarbonyl-methyl and ω-(N,N-diethyldithiocarbamyl). The macromonomer was difficult to homopolymerize, but it was easilycopolymerized with methyl methacrylate (MMA) initiated by AIBN to form graft copolymers (PMMA-g-PSt) with PStbranches randomly distributed along the PMMA backbone. Copolymerization reaction and the structure of the graftcopolymers were strongly affected by M_n and concentration of the macromonomer. The composition and M_n of the purified graft copolymer were determined by ~1H-NMR and GPC analysis.     

Investigation of the viscosity of solutions of graft copolymers

Living polystyrene was grafted on fractions of poly(methyl methacrylate) by an anionic grafting reaction. Unreacted polystyrene was separated by fractional precipitation. The composition of copolymer, i.e., the molecular weight of main chains and side chains, was determined. The influence of molecular weight and structure of graft copolymers on the intrinsic viscosity of solutions was examined. This may be expressed in the form [η] = KM^agⁿ. The dependence between a and n in this equation was established.     

NMR investigation of effect of dissolved salts on the thermoresponsive behavior of oligo(ethylene glycol)‐methacrylate‐based polymers

The synthesis of thermo‐ and ionic‐responsive copolymers based on polyethylene glycol methyl ether methacrylate (OEGMA) and 2,2,2‐trifluoroethyl acrylate (TFEA) via reversible addition‐fragmentation chain transfer polymerization is described. Reactivity ratios for the copolymerization of OEGMA and TFEA are r_OEGMA = 2.46 and r_TFEA = 0.22, indicating that OEGMA is incorporated more rapidly than TFEA monomers. The copolymers are thermosensitive and exhibit volume phase transitions (lower critical solution behavior) at temperature, which depend on copolymer composition and the presence of added salts in the aqueous solutions. It was found that the copolymers exhibited LCST transitions at temperatures below 353 K only in salt solutions. ¹H NMR measurements indicated that motion of the protons located in and near the hydrophobic main chain are more sensitive to temperature than protons in the hydrophilic OEGMA side chains. The hydrophilic side chains remain largely hydrated; however, the presence of two distinct conformations of the terminal groups of the side chains was confirmed. The influence of OEGMA side chain length, copolymer composition, and salt type on aggregation behavior and dynamics was examined in detail. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2375–2385     

Fluorescence studies of the self‐organization of a cholesterol‐bearing polymethacrylate in n‐hexane solution

A copolymer of cholesteryl 6‐(methacryloyloxy)hexanoate and a small amount of (1‐pyrenylmethyl) 6‐(methacryloyloxy)hexanoate (Py‐C₅‐MA) was prepared by free radical copolymerization. A copolymer of 1‐eicosanylmethacrylate and a small amount of Py‐C₅‐MA was also prepared as a reference copolymer. A wide‐angle X‐ray diffraction pattern for an n‐hexane solution of the cholesterol(Chol)‐containing copolymer showed a peak corresponding to a spacing of 5.3 Å. In n‐hexane, the hydrodynamic radius (R_h) for the Chol‐containing copolymer (M_w = 7.8 × 10⁴) was 8.1 nm, while that of the eicosanyl‐containing copolymer (M_w = 4.9 × 10⁴) was 9.6 nm, R_h for the former being smaller than that for the latter, although M_w for the former was higher than that of the latter. ¹H‐NMR spectra of the Chol‐containing polymer in n‐hexane‐d₁₄ indicated a strong restriction of local motions of pendant Chol groups. Fluorescence spectra of the Chol‐containing copolymer in n‐hexane indicated that each pyrene group was isolated from others. In n‐hexane/benzene mixed solutions of the Chol‐containing polymer, the ratio of the intensity of the excimer relative to the monomer emission decreased with increasing the ratio of n‐hexane in the mixed solvent. Electron transfer from N,N‐dimethylaniline to singlet‐excited pyrene chromophores was suppressed in the Chol‐containing copolymer in n‐hexane. The pyrene chromophores exhibited a long triplet lifetime in n‐hexane. These observations led us to conclude that Chol groups formed stacks in n‐hexane, and that the pyrene chromophores were trapped in the Chol stacks, leading to the “protection” of pyrene from the bulk phase. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 47–58, 1999     

Controlled Free-Radical Copolymerization of N-vinyl succinimide and n-Butyl acrylate via a Reversible Addition–Fragmentation Chain Transfer (RAFT) Technique

Summary : Copolymerization of N-vinyl succinimide and n-butyl acrylate in the presence of dibenzyl trithiocarbonate as a reversible addition-fragmentation chain transfer agent was investigated. The linear dependence of molecular mass on conversion and low values of polydispersity index confirmed pseudo-living mechanism of the process. For the first time the soluble copolymers of N-vinyl succinimide and n-butyl acrylate with high composition homogeneity have been synthesized by copolymerization in bulk. The copolymerization kinetics was studied by NMR ¹H spectroscopy; the reactivity ratios were determined: r_VSI = 0.11, r_BA = 2.54. The copolymer microstructure was estimated; it was shown that in conditions of RAFT polymerization gradient copolymers enriched with BA on the tails of the macromolecule and with VSI in the middle can be obtained. The method of elimination of trithiocarbonate fragment by the reaction with an excess of AIBN was proposed leading to formation of the simplest gradient structure of N-vinyl succinimide – n-butyl acrylate copolymer.     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.     

In situ Fourier transform near infrared spectroscopy monitoring of copper mediated living radical polymerization

In situ Fourier transform near infrared (FTNIR) spectroscopy was successfully used to monitor monomer conversion during copper mediated living radical polymerization with N‐(n‐propyl)‐2‐pyridylmethanimine as a ligand. The conversion of vinyl protons in methacrylic monomers (methyl methacrylate, butyl methacrylate, and N‐hydroxysuccinimide methacrylate) to methylene protons in the polymer was monitored with an inert fiber‐optic probe. The monitoring of a poly(butyl methacrylate‐b‐methyl methacrylate‐b‐butyl methacrylate) triblock copolymer has also been reported with difunctional poly(methyl methacrylate) as a macroinitiator. In all cases FTNIR results correlated excellently with those obtained by ¹H NMR. On‐line near infrared (NIR) measurement was found to be more accurate because it provided many more data points and avoided sampling during the polymerization reaction. It also allowed the determination of kinetic parameters with, for example, the calculation of an apparent first‐order rate constant. All the results suggest that FTNIR spectroscopy is a valuable tool to assess kinetic data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4933–4940, 2004     

CRYSTALLIZATION SEGREGATION DSC STUDIES OF PP/PE COPOLYMERS

 The structural analysis of two PP/PE copolymer samples, I and 2, was conducted by using ¹³C-NMR, GPC and crystallization segregation DSC (CSDSC) techniques. A pure polypropylene sample was also used for comparison. It was found that the two copolymer samples are very close in composition (the ethylene mol content is 4.3% and 4.5%,respectively), stereoregularity (96% and 97%) and molecular weight (M_w, = 7.0 x 10⁴ and 7.3x10⁴; M_w/M_n = 5.0 and 6.1,respectively). While the CSDSC thermograms of the two samples are quite different from each other. Sample 1 shows a higher average melting temperature and a broader distribution of its thermogram. These phenomena were explained as an indication of a less uniform distribution of ethylene units along the PP chains for sample 1. It was noted that CSDSC is a very sensitive and convenient technique for structural studies of copolymers.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620     

Polymerization of coordinated monomers. XVI. Stereoregulation in the alternating copolymerization of methyl methacrylate with styrene in the presence of metal halides

Triad cotacticities of alternating copolymers of methyl methacrylate with styrene prepared in the presence of zinc chloride, ethylaluminium sesquichloride, and ethylboron dichloride are investigated from the mechanistic point of view by means of ¹H- and ¹³C-NMR. The cotacticities from ¹H-NMR spectra are obtained accurately by using α-d-styrene in the place of styrene and by measuring the spectra on the copolymer in o-dichlorobenzene at 170°C. The relative intensities of three peaks of the splitting signal for the methoxy protons in the nonalternating copolymers obtained by the use of benzoyl peroxide in the absence of metal halides agree well with the cotacticity distribution calculated theoretically by the Lewis-Mayo mechanism with the stereoregulation following Bernoullian statistics. The splitting signals in the ¹H- and ¹³C-NMR spectra of the alternating copolymers prepared in the presence of metal halides cannot be explained by the same mechanism. The relative intensities of three peaks of the splitting signals for the methoxy protons and for the carbonyl carbon in the methyl methacrylate unit (the contents of cotactic triads centered by the methyl methacrylate unit) are not equal to those for the aromatic C₁ carbon in the styrene unit (the contents of cotactic triads centered by styrene unit). The value of f²Y - 4fxfz is not equal to zero, where fx, fy, and fz are the cosyndiotactic, coheterotactic, and coisotactic triad contents, respectively, in the alternating copolymer. Copolymers obtained in the presence of zinc chloride are not exactly equimolar alternating but always contain a methyl methacrylate unit in excess, and the relative intensities of the three peaks for the aromatic C₁ carbon change with the copolymer composition. These results are explained by a proposed mechanism: the alternating copolymerization proceeds through the homopolymerization of a ternary molecular complex composed of a metal halide, methyl methacrylate, and styrene, accompanied with the stereoregulation following first-order Markovian statistics; the increase of methyl methacrylate content in the copolymer prepared in the presence of zinc chloride is caused by the participation of the binary molecular complex composed of a metal halide and methyl methacrylate in addition to the ternary molecular complex.     

Determination of composition of ethylene–propylene copolymers by intrinsic viscosity

Intrinsic viscosities have been measured at 25° on five ethylene–propylene copolymer samples ranging in composition from 33 to 75 mole-% ethylene. The solvents used were n-C₈ and n-C₁₆ linear alkanes and two branched alkanes, 2,2,4-trimethylpentane and 2,2,4,4,6,8,8-heptamethylnonane (br-C₁₆). This choice was based on the supposition that the branched solvent would prefer the propylene segments and the linear solvent the ethylene segments, due to similarity in shape and possibly in orientational order. It was found that [η]_n ? [η]_br ≡ Δ[η] is indeed negative for propylene-rich copolymers, zero for a 56% ethylene copolymer, and positive for ethylene-rich copolymers. The Stockmayer–Fixman relation was used to obtain from Δ[η] a molecular-weight independent function of composition. The quantities (Δ[η]/[η])(1 + aM^?1/2) and Δ[η]/M are linear with the mole percent ethylene in the range investigated with 200 ≤ a ≤ 2000. The possibility of using these results for composition determination in ethylene–propylene copolymers is discussed. Intrinsic viscosities in the same solvents are reported for two samples of a terpolymer with ethylidene norbornene.     

Charge-mosaic membrane from gamma-irradiated poly(styrene-butadiene-4-vinylpyridine) triblock copolymer

Poly(styrene-butadiene-4-vinylpyridine) triblock copolymers were prepared from styrene (S), butadiene (B), and 4-vinylpyridine (P) by sequential anionic polymerization with n-butyllithium as initiator and benzene as solvent. The triblock copolymer was characterizated by gel-permeation chromatography (GPC), transmission electron microscopy (TEM), and viscoelastic spectrometry. Films of the triblock copolymer cast from solution in mixtures of chloroform and n-butyraldehyde were subjected to gamma-ray irradiation to form cross-linked networks, Cationic and anionic groups were introduced by sulfonation and quater-nization to obtain charge-mosaic membranes. The resulting membrane had substantial cation-exchange and anion-exchange capacities. The membranes were very permeable to electrolyte (J_KCI = 2.10×10^?8 mol/cm² s). © 1993 John Wiley & Sons, Inc.     

Composition and Microstructure Determination of the Syndiotactic Copolymer of para-Methylstyrene and Styrene by Pyrolysis Gas Chromatography

The composition and microstructure of syndiotactic para-methylstyrene/styrene copolymer was determined by a pyrolysis gas chromatography (Py-GC) method. This method uses the styrene and para-methylstyrene monomer peak intensities to determine the styrene and para-methylstyrene composition in the copolymer. The number average sequence length of styrene was calculated by using the triad peak intensities. Because of the low concentration of para-methylstyrene in the copolymer, the number average sequence length of para-methylstyrene was determined with formulas that incorporate the copolymer composition and the number average sequence length of styrene. The distribution of para-methylstyrene defined by the terms “percent of single units” and “percent of desired distribution” was calculated by the number average sequence of para-methylstyrene. This method has been tested with copolymers containing up to 24 mole% of para-methylstyrene. The composition results from Py-GC of para-methylstyrene and styrene copolymers used in this study were in excellent agreement with ¹H-NMR results.     

Living Carbocationic Polymerization. LII. Living Carbocationic Copolymerization of Indene and p-Methylstyrene. 2. Synthesis,Characterization, and Physical Properties of Poly((Indene-co-p-Methylstyrene)-b-Isobutylene-b-(Indene-co-p-Methylstyrene)) Thermoplastic Elastomers

Abstract

Novel thermoplastic elastomers (TPEs) consisting of a central rubbery polyisobutylene (PIB) segment flanked by two glassy outer segments comprising indene (Ind)-co-p-methylstyrene (pMeSt) random copolymers have been prepared. The synthesis was effected by sequential monomer addition in one reactor: The process starts by the biliving homopolymerization of isobutylene (IB) and yields the living dication ⁺PIB⁺; the latter, upon the introduction of Ind/pMeSt mixtures, induces the living copolymerization of these monomers and yields the target TPE P(Ind-co-pMeSt)-b-PIB-b-P(Ind-co-pMeSt) triblock. The length of the rubbery midblock and the composition of the Ind-co-pMeSt random copolymer outer blocks (i.e., the overall composition of the triblocks) can be readily controlled. The glass transition temperature (T_g ) of the outer blocks can be fine-tuned by controlling the relative Ind/ pMeSt composition. The triblocks are excellent TPEs; for example, a P(Ind-co-pMeSt)-b-PIB-b-P(Ind-co-pMeSt) of M _n ≈ 115,000 g/mol containing a PIB midblock of M _n ≈ 70,200 g/mol and glassy copolymer outer blocks of P(Ind-co-pMeSt) [Ind/pMeSt = 41/59 (w/w)] exhibited 23.4 MPa tensile strength and 460% elongation. Tensile strengths and 300% moduli increase with the relative amount of the glassy segment present. Hardness increases with increasing Ind content.     

A New Cyanofluorene–Triphenylamine Copolymer: Synthesis and Photoinduced Intramolecular Electron Transfer Processes

A new π‐conjugated copolymer, namely, poly{cyanofluore‐alt‐[5‐(N,N′‐diphenylamino)phenylenevinylene]} ((CNF–TPA)_n), was synthesized by condensation polymerization of 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)diacetonitrile and 5‐(N,N′‐diphenylamino)benzene‐1,3‐dicarbaldehyde by using the Knoevenagel reaction. By design, diphenylamine, alkylfluorene and poly(p‐phenylenevinylene) linkages were combined to form a (CNF–TPA)_n copolymer which exhibits high thermal stability and glass‐transition temperature. Photodynamic measurements in polar benzonitrile indicate fast and efficient photoinduced electron transfer (≈10¹¹ s^?1) from triphenylamine (TPA) to cyanofluorene (CNF) to produce the long‐lived charge‐separated state (90 μs). The finding that the charge‐recombination process of (CNF^.?–TPA^.+)_n is much slower than the charge separation in polar benzonitrile suggests a potential application in molecular‐level electronic and optoelectronic devices.     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003