A Spectrophotometric Study on Complex Formation of Nickel (II) and Cobalt (II) with Bromopyrogallol Red

Nickel (II) and Cobalt (II) form in 50% ethanolic medium, a bluish violet complex with Bromopyrogallol Red (BPR) in the mole ratio of 1:1 (Ni(II)) and 1:2 (Co(II)), both having at 620 nm, stable in the pH ranges 6.0-7.5 and 5.5-7.0, respectively. The thermodynamic stability constants and overall changes in the free energy of formation, enthalpy and entropy have been determined in both the cases. Beer's law is obeyed over the concentration range 0.5-5.0 ppm of Nickel and 0.2-3.0 ppm of Cobalt at 620 nm. The net molar absorptivities are 1.6 × 10⁴ and 2.9 × 10⁴ and the sensitivities are 0.00367 and 0.00219 μg of Nickel and Cobalt per cm,/². The effect of diverse ions on the metal ions determination is also reported.     

Synthesis and spectrophotometric study of 2-[2-(3,5-dibromopyridyl,)azo] -5-dimethylaminobenzoic acid as an analytical reagent: Determination of nickel

2-[2-(3,5-Dibrornopyridyl)azo]-5-dimethyIam;nobenzoic acid (3,5-diBr-PAMB) has been synthesized and its potential for the spectrophotometric determination of metals studied. It reacts sensitively with nickel, cobalt, iron and copper, and is particularly useful for nickel. The apparent molar absorptivity in chloroform is 1.50 × 10⁵ l mol^-1 cm^-1 and the Sandell sensitivity is 0.4 ng Ni cm^-2. Nickel reacts with 3.5-diBr-PAMB at pH 4–10; at pH 4–7 the complex can be extracted into chloroform to give a stable purple solution. The optimal calibration range is 0.04–0.4 ppm Ni. Only Cu, Co, Fe, Pd and V interfere seriously but Pd, Cu and V can be masked by thiourea.     

Spectrophotometric Determination of Palladium(II) with n-Hydroxy-N,N-Diphenylbenzamidine and 1 -(2-Pyridylazo)-2-Naphthol

A spectrophotometric method to determine palladium(II) at trace levels is based on the extraction of palladium(II) as a binary complex with N-hydroxy-N,N′-diphenylbenzamidine (HDPBA) in chloroform at pH 5.0 ± 0.2. The complex shows maximum absorbance at 400 nm with molar absorptivity 6.4 × 10³ L mol^?1 cm^?1. The sensitivity of the Pd(II)-HDPBA complex was enhanced by the addition of l-(2-pyridylazo)-2-naphthol (PAN). The green coloured complex shows maximum absorbance at 620 nm with molar absorptivity 1.58 × 10⁴ L mol^?1 cm^?1. Sandell's sensitivity and the detection limit of the method are 0.0067 μg cm^?2and 0.1 μg Pd(II) mL^?1, respectively. Most common metal ions associated with palladium metal do not interfere. The effects of various analytical parameters on the extraction of the metal are discussed.     

Simultaneous Determination of Cobalt and Nickel Using Morpholinedithiocarbamate (MDTC) as Reagent by First and Second Derivative Spectrophotometry

A selective and sensitive derivative method has been proposed for the simultaneous determination of trace amounts of Co(II) and Ni(II) with morpholinedithiocarbamate (MDTC) in the presence of sodium lauryl sulphate (SLS). The molar absorption coefficients of the 1:2 complex of Co(II) and Ni(II) at 326 nm and 322 nm are 2.248 × 10⁴ and 2.505 × 10⁴ L mol^?1 cm^?1 for zero order. The analytical sensitivity for the second derivative of Co(II) and Ni(II) complexes are 0.0044 μg mL^?1 and 0.0060 μg mL^?1. The developed derivative procedure, using the zero‐crossing technique, has been successfully applied for the analysis of Co(II) and Ni(II) simultaneously in different alloy samples.     

A rapid method for the spectrophotometric determination of palladium(II) and osmium(VIII)

Propionyl promazine phosphate is proposed as a new reagent for the rapid spectrophotometric determination of microgram amounts of Pd(II) and Os(VII). PPP instantaneously forms an orange-red 1:1 complex with Pd(II) in sodium acetate-hydrochloric acid buffer of pH 0.8 to 4.0 at room temperature. The reagent also forms an orange-red radical cation with Os(VIII) in 0.5 to 2.0 M hydrochloric acid. The Pd-PPP complex exhibits an absorption maximum at 490–500 nm with molar absorptivity of 7.1 × 10³ liter mol^?1 cm^?1. The Os-PPP radical cation has an absorption maximum at 505–515 nm with molar absorptivity of 2.21 × 10⁴ liters mol^?1 cm^?1. The Sandell sensitivity is 0.022 μg/cm² (Pd) and 0.008 μg/ cm² (Os). Beer's law is valid over the concentration range 0.2 to 21 ppm (Pd) and 0.2 to 4.2 ppm (Os). The proposed method offers the advantages of simplicity, rapidity, and without the need for heating or extraction. The reagent is used for the determination of Pd in the synthetic mixtures corresponding to Pd alloys used in jewelery and Os in osmiridium alloy.     

Extraction-spectrophotometric determination of nickel in steels and aluminium metal with 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine and ethyl tetrabromophenolphthalein

Nickel ions react with 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine in aqueous solution at pH 6.8 to form a red 1:3 complex cation which can be extracted at pH 6.3 into 1,2-dichloroethane with ethyl tetrabromophenolphthalein anion as an ion association compound having an absorption maximum at 610 nm. The apparent molar absorptivity is 2.21 × 10⁵ l mol^?1 cm^?1 and a linear calibration graph is obtained in the range 0–0.05 μg ml^?1 (0?8.52 × 10^?7 M) nickel in aqueous solution. The r.s.d, is 1.5%. This method can be applied to the determination of traces of nickel in steels and aluminium chips.     

Simultaneous spectrophotometric determination of binary mixtures of nickel,cobalt and vanadium with 3-(picolydene)benzenesulphonic acid 2-hydroxybenzoylhydrazone

The synthesis and characterization of a water-soluble reagent, 3-(picolydene)benzenesulphonic acid 2-hydroxybenzoylhydrazone, is described. The reagent is stable in aqueous media. The colour reations with nickel(II), cobalt(III) and vanadium(V) ions in slightly acidic solutions have molar absorptivities in the range 1.4–3.6 × 10⁴ l mol^?1 cm^?1. Simultaneous determinations of Ni, Co and V in binary mixtures are possible. Interference data are reported.     

Study of the solid phase extraction and spectrophotometric determination of nickel using 5-(4′-chlorophenylazo)-6-hydroxypyrimidine-2,4-dione in environmental samples

A rapid, sensitive and selective method for the determination of nickel based on the rapid reaction of nickel(II) with 5-(4′-chlorophenylazo)-6-hydroxypyrimidine-2,4-dione (CPAHPD) and the solid phase extraction of the Ni(II)–CPAHPD complex with C18 membrane disks has been developed. In the presence of pH 6.8 buffer solution and cetylpyridinium bromide (CPB) medium, CPAHPD reacts with nickel to form a red complex of a molar ratio of 1:1 (nickel to CPAHPD). This complex was enriched by solid phase extraction (SPE) with C18 membrane disks. An enrichment factor of 100 was obtained by elution of the complex from the disks with the minimal amount of isopentyl alcohol. The molar absorptivity and Sandell sensitivity of the complex was 3.11 × 10⁵ L mol^?1 cm^?1 and 0.0189 ng cm^?2, respectively at 549 nm in the measured solution. Beer's law was obeyed in the range of 0.01–0.37 μg mL^?1, while that obtained by Ringbom plot was in the range of 0.025–0.35 μg mL^?1. The detection and quantification limits were calculated and found to be 0.003 and 0.01 μg mL^?1. The proposed method was applied to the determination of nickel in water, food, biological and soil samples with good results.     

Liquid-Liquid Extraction,Photometric and Atomic Absorption Spectrophotometric Determination of Mercury

Abstract

A selective and sensitive spectrophotometric and atomic absorption spectrophotometric method is developed for the determination of traces of mercury with N-phenylcinnamohydroxamic acid (PCHA) in the environment. Mercury is extracted into a chloroform solution of PCHA at pH 8.5-10.0 and determined by AAS. The mercury hydroxamate binary complex is yellow in colour having a maximum absorbance at 390 nm and molar absorptivity 4.3 × 10³ 1 mol^?1 cm^?1, sandell sensitivity 0.0466 μg/cm². The ternary system using 1-(2-pyridylazo)-2-naphthol has molar absorptivity 8.82 × 10³ 1 mol^?1 cm^?1 at 550nm, sandell sensitivity 0.0228 μ/cm². Beer's law is obeyed in the concentration range of 2.37-38.0 ppm and 0.80-19.5 ppm of mercury for binary and ternary system, respectively. The extraction of Hg-PCHA binary system is studied with a liquid cation exchanger, bis-(2-ethyl hexyl) phosphoric acid (HDEHP) and found to have better selectivity than Hg-PCHA-PAN system. The molar absorptivity of the Hg-PCHA-HDEHP system is 8.82 × 10³ 1 mol^?1 cm^?1 at 390 nm and Beer's law is obeyed in the concentration range of 0.47-20 ppm of mercury.

The present method is applied to the determination of mercury in eye drops, aurvedic drugs and environmental samples.     

Spectrophotometric Determination of Cobalt(II), Nickel(II) and Copper(II) with Acenaphthenequinone Monosemicarbazone (AQSC)

Cobalt(II), nickel(II) and copper(II) complexation with acenaphthenequinone monosemicarbazone (AQSC) has been studied spectrophotometrically. The Co(II), Ni(II) and Cu(II) complexes are soluble in ethanol medium and exhibit maximum absorbance at 410, 420 and 430 nm, respectively. The sensitivity of the reactions are 0.012, 0.02 and 0.01 μg/cm² for cobalt, nickel and copper systems. All the three complexes show maximum and constant absorbance in the pH range 8.4 to 9.8, 6.3 to 8.4 and 5.4 to 8.0 for Co-AQSC, Ni-AQSC and Cu-AQSC, respectively. Nickel and copper in some alloys have also been analysed.     

1‐(2,6‐dibenzhydryl‐4‐fluorophenylimino)‐2‐aryliminoacenaphthylylnickel halides highly polymerizing ethylene for the polyethylenes with high branches and molecular weights

A series of 1‐(2,6‐dibenzhydryl‐4‐fluorophenylimino)‐ 2‐aryliminoacenaphthylene derivatives ( L1–L5 ) and their halonickel complexes LNiX₂ (X = Br, Ni1–Ni5 ; X = Cl, Ni6–Ni10 ) are synthesized and well characterized. The molecular structures of representative complexes Ni2 and Ni4 are confirmed as the distorted tetrahedron geometry around nickel atom by the single crystal X‐ray diffraction. Upon activation with methylaluminoxane, all nickel complexes show high activities up to 1.49 × 10⁷ g of PE (mol of Ni)^?1 h^?1 toward ethylene polymerization, producing polyethylenes with high branches and molecular weights up to 1.62 × 10⁶ g mol^?1 as well as narrow polydispersity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1369–1378     

Spectrophotometric determination of nickel with cyclohexylidine-ammonium 2-aminocyclohexylidene-1-cyclohexene-1-dithiocarboxylate

An (extraction)-spectrophotometric method is reported for the determination of nickel(II) with cyclohexylidineammonium 2-aminocyclohexylidene-l-cyclohexene-l-dithiocarboxylate. The violet 1:2 chelate is soluble in aqueous ethanolic or acetonic media at pH 6–9, or can be extracted into methyl isobutyl ketone. The molar absorptivity of the complex is about 2.5 × 10⁴ l mol^?1 cm^?1 at 550 nm.     

Synthesis of New Reagent 2,6‐Diacetylpyridine Bis‐4‐Phenyl‐3‐Thiosemicarbazone (2,6‐DAPBPTSC): Selective,Sensitive and Extractive Spectrophotometric Determination of Co(II) in Vegetable,Soil, Pharmaceutical and Alloy Samples

New synthesized reagent 2,6‐diacetylpyridine bis‐4‐phenyl‐3‐thiosemicarbazone (2,6‐DAPBPTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a reddish brown colored complex with 2,6‐DAPBPTSC, which is extracted into isoamylalcohol, under optimum conditions. The maximum absorption of the isoamylalcohol extract is measured at 400 nm. Beer's law is applied in the range 0.6‐6.0 ppm of cobalt(II). The molar absorptivity and Sandell's sensitivity of the complex is calculated as 2.2 × 10⁴ L mol^?1 cm^?1 and 2.68 × 10^?3 μg cm^?2, respectively. An adequate linearity with a correlation coefficient value of 0.969 is obtained for the Co(II)‐2,6‐DAPBPTSC complex. The instability constant of the complex, calculated from Asmus' method is 3.75 × 10^?4 The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.388 and the detection limit a value is 0.0028 μg mL^?1. The method is successfully employed for the determination of cobalt(II) in real samples, such as vegetables, soil, water samples, standard alloy samples, and the performance of the present method was evaluated in terms of Student ‘t’ test and Variance ‘f’ test, which indicates the significance of the present method is an inter comparison of the experimental values, using atomic absorption spectrometer (AAS).     

Extraction-spectrophotometric determination of nickel as Ni-(PAR)2-(CTAB)2 complex in polymetallic sea-bed nodules and steels

A red, water-soluble complex of nickel with PAR can be extracted into chloroform with CTAB at pH 7.0. The system obeys Beer's law upto 0.5 μg/ml with a molar absorptivity of 45 200 L·mol^?1·cm^?1 at 540 nm. Job's method of continuous variations revealed that the composition of the extracting species is 1:2:2 for nickel:PAR:CTAB. Based on this extraction, a highly sensitive and selective spectrophotometric method for the determination of nickel in polymetallic sea-bed nodules and in steels, after prior separation of iron and manganese, was developed. The standard deviation was 0.04–0.127 μg for 5–25 μg of nickel.     

A Sensitive Spectrophotometric Determination of Tantalum (V) with 5,7-Diiodo-8-Hydroxyquinoline

A spectrophotometric method for the determination of trace amounts of tantalum (V) with 5–7-diiodo-8-hydroxyquinoline is described. With this reagent tantalum forms a yellowish-orange coloured complex which is stable in the pH range of 8.5–9.0. The coloured complex obeys Beer's law over the concentration range of 1–10 μg tantalum (V) ml^?1 at 415 nm in aqueous solution with a molar absorptivity of 5.305×10³ l mol^?1 cm^?1. The metal; ligand ratio ML₂ was confirmed by Job's continuous variation and mole ratio methods. The method was used to determine tantalum in steels.     

Analytical Properties of 4, 4′-Biazobenzenediazoaminobenzene and its Applications in Spectrophotometry

Abstract

The spectral characteristics and analytical properties of 4, 4′-Biazobenzenediazoaminobenzene as a new chromogenic reagent have been described and the optimum conditions for reaction with eight metal ions are presented. In the presence of Triton X-100 and sodium tetraborate solution, the reagent can be used for the determination of Hg, Ni, Cd. The molar absorptivities are 1.8×10⁵ l.mol^?1. cm^?1 at 515 nm for mercury, 2.0×10⁵ l.mol^?1. cm^?1 at 540 nm for nickel, and 1.8×10⁵ l.mol^?1.cm^?1 at 526 nm for cadmium. The recommended procedure has been used for the spectrophotometric determination of cadmium in waste water.     

Liquid-liquid extraction and spectrophotometric determination of palladium with 2-mercaptobenz-amide

2-Mercaptobenzamide (MBA) was investigated as a reagent for the extraction of palladium. The palladium complex of MBA was extracted into tributyl phosphate (TBP). The pK_a of the ligand was 5.45 with the stability constant of the palladium complex β₂=10^7.1. The composition of the complex in TBP was Pd:MBA:TBP=1:2:2. Addition of sodium chloride accelerated the rate of extraction. Various interfering ions could be masked with EDTA; Ag(I), Au(III), Os(VIII), Se(IV), Te(IV) etc. interfered. The molar absorptivity was 1.59×10⁴ l mol^?1 cm^?1; 1–35 μg Pd could be determined at pH 6.0.     

The extractive spectrophotometric determination of palladium(ii) as the mixed-ligand complex with picolinealdehyde-2-hydroxy-5-phenylanil and chloride ion

The extraction of palladium(II) with chloroform in the presence of PHPA and chloride ions is described. The extracted species has an absorption maximum at 627 nm, and Beer's law is obeyed over the range 10–200 μg of palladium. The molar absorptivity is 4.90·10³ l mol^?1 cm^?1 at 627 nm. The 1:1:1 Pd(PHPA)-Cl complex is extracted from aqueous solution. The effect of foreign ions on the determination of palladium(II) is examined.     

A novel spectrophotometric method for determination of cyanide using cobalt (II) phthalocyanine tetracarboxylate as a chromogen

Cobalt (II) phthalocyanine tetracarboxylate [Co (II)Pc-COOH] has been prepared and used in aqueous solutions as a novel chromogenic reagent for the spectrophotometric determination of cyanide ion. The method is based on measuring the increase in the intensity of the monomer peak in the reagent absorbance at 682 nm due to the formation of a 1 : 2 [Co (II)Pc-COOH] : [CN] complex. The complex exhibits a molar absorptivity (ε) of 7.7 × 10⁴ L mol^?1 cm^?1 and a formation constant (K_f ) of 5.4 ± 0.01 × 10⁶ at 25 ± 0.1°C. Beer's law is obeyed over the concentration range 0.15–15 µg mL^?1 (5.8 × 10^?6–5.8 × 10^?4 M) of cyanide ion, the detection limit is 20 ng mL^?1 (7.7 × 10^?7 M) the relative standard deviation is ±0.7% (n = 6) and the method accuracy is 98.6 ± 0.9%. Interference by most common ions is negligible, except that by sulphite. The proposed method is used for determining cyanide concentration in gold, silver and chromium electroplating wastewater bath solutions after a prior distillation with 1 : 1 H₂SO₄ and collection of the volatile cyanide in 1 M NaOH solution containing lead carbonate as recommended by ASTM, USEPA, ISO and APAHE separation procedures. The results agree fairly well with potentiometric data obtained using the solid state cyanide ion selective electrode.     

2-Methyl-1, 4-Naphthoquinone Thiosemicarbazone as a Sensitive and Selective Chromogenic Reagent for Microdetermination of Palladium (II)

A simple, sensitive and selective procedure has been developed for the spectrophotometric determination of palladium. Palladium (II) reacts with 2-methyl-1,4-naphthoquinone thiosemicarbazone to form an orange brown complex in the pH range 8.2–9.5. The sensitivity, in terms of Sandell's definition, is 0.0025 μg Pd/cm² at 500 nm. The system adheres to Beer's law upto 2.66 ppm of palladium and optimum concentration range for the determination of the metal is 0.3–2.29 ppm with molar absorbtivity of 4.2×10⁴ ? mole^?1 cm^?1. The complex has 1:1 molar composition, as deduced by Job's method. The determination of palladium has been carried out in presence of foreign ions especially in presence of eighth group metals.