Disproportionation-to-combination ratios for cyclohexyl-h11 and -d11 radicals in the gas phase as determined by the radiolysis of water vapor–cyclohexane mixtures

In the radiolysis of water vapor containing small concentrations of cyclohexane, the principal products which account for about 98% of all end products are found to be hydrogen, cyclohexene, and bicyclohexyl. Cyclohexene and bicyclohexyl yields were determined over a range of temperatures (70–200°C), total pressures (50–2400 torr), and total doses (0.15–2.0 Mrad). The disproportionation–combination ratio k/k for c-C₆H₁₁ radicals could be determined as 0.56 ± 0.01 from the ratio of cyclohexene to bicyclohexyl yield. By using c-C₆D₁₂, the ratio k/k for c-C₆D₁₁ radicals is found to be 0.38 ± 0.01. Comparison of the reactivity pattern of C₆H₁₁ and C₆D₁₁ radicals leads to (k)/(k)/(k/k) = 1.47 ± 0.02. The corresponding values for the reactions of c-C₆H₁₁ with c-C₆D₁₁ were also determined.     

Alkane loss from collisionally activated alkylmethyleneimmonium ions

The collision-induced dissociation (CID) spectra of five alkylmethyleneimmonium ions (H₂C-N⁺R¹R², (a) R¹ = R² = C₂H₅, (b) R¹ = n-C₃H₇, R² = H, (c) R¹ = n-C₃H₇, R² = CH₃, (d) R¹ = n-C₃H₇, R² = C₂H₅, (e) R¹ = R² = n-C₃H₇) are reported and discussed in terms of the mechanism of alkane loss. The most abundant alkane losses result from 2-azaallylic bond cleavages within R¹ and R² leading to daughter ions of m/z 84. Ion d (R¹ = n-C₃H₇, R² = C₂H₅) was chosen for a deuterium-labelling study because it exhibited methane loss nearly free from interferences with other fragmentations. The methane lost consists to a great extent (95%) of the methyl moiety of R². Whereas the methyl moiety obviously stays intact during the fragmentation process, the hydrogen additionally needed originates from all positions of R¹ and the double-bonded methylene in an approximately random distribution, suggesting extensive hydrogen migrations preceding the transfer step.     

The Kinetics of alkyl radical reactions with aliphatic alcohol glasses as studied by electron spin resonance

Methyl radical reactions with matrix molecules in glasses C₂H₅OH, (CH₂OH)₂, n- and i-C₃H₇OH, n- and i-C₄H₉OH, n- and i-C₅H₁₁OH, C₂D₅OH, and i-C₃D₇OD, and the reactions of ?₂H₅, ?₃H₇, ?₄H₉, ?₅H₁₁ with methanol glasses have been studied. Alkyl radicals were produced by photolysis of diphenylamine–alkylhalide–alcohol mixtures using ultraviolet light. In all cases the alkyl radical decay follows the law c = c₀ exp(-k √t). The √t law should not be associated with alkyl radical diffusion in a matrix. A method of processing the kinetics of those reactions in which one paramagnetic species changes into another with the total concentration being constant and the electron spin resonance spectra of both species overlapping, is described.     

Synthesis of asymmetrical bis(arene) iron complexes

Visible light irradiation of the [(η-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in CH₂Cl₂ in the presence of alkyl-substituted benzenes results in arene exchange forming the [(η⁵-C₆H₇)Fe(η-C₆R₆)]⁺ cations (2a–d: C₆R₆ is toluene, p-xylene, mesitylene, and durene). The mixed bis(arene) [(η-C₆H₆)Fe(η-C₆R₆)]²⁺ iron complexes (3a–d) were synthesized by hydride ion abstraction from 2a–d by [Ph₃C]⁺. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1864–1865, September, 2007.     

The enthalpies of formation of bis-(benzene)molybdenum and of bis-(toluene)tungsten

Microcalorimetric measurements at 520–523 K of the heats of thermal decomposition and of iodination of bis-(benzene)molybdenum and of bis-(toluene)tungsten have led to the values (kJ mol^?): ΔH^o_f[Mo(η-C₆H₆)₂, c] = (235.3 ± 8) and ΔH^o_f[W(η⁶-C₇H₈)₂, c] = (242.2 ± 8) for the standard enthalpies of formation at 25°C. The corresponding ΔH^o_f(g) values, using available and estimated enthalpies of sublimation, are (329.9 ± 11) and 352.2 ± 11) respectively, from which the metalligand mean bond-dissociation enthalpies, $\text{D}$(Mo—benzene) = (247.0 ± 6) and $\text{D}$(W—toluene) = (304.0 ± 6) kJ mol^?1, are derived.     

Achieving strictly linear polyethylenes by the NNN-Fe precatalysts finely tuned with different sizes of ortho-cycloalkyl substituents

Six examples of newly synthesized α,α’-bis (aryl)-2,3:5,6-bis (pentame thylene)pyridyliron complexes [2,3:5,6-{C₄H₈C(NAr)}₂C₅HN]FeCl₂ (Ar = 2-(c-C₅H₉)-6-MeC₆H₃ Fe1 , 2-(c-C₆H₁₁)-6-MeC₆H₃ Fe2 , 2-(c-C₈H₁₅)-6-MeC₆H₃ Fe3 , 2-(c-C₅H₉)-4,6-Me₂C₆H₂ Fe4 , 2-(c-C₆H₁₁)-4,6-Me₂C₆H₂ Fe5 , 2-(c-C₈H₁₅)-4,6-Me₂C₆H₂ Fe6 ; c refers as cyclic), on activation with methylalumoxane (MAO) or modified MAO (MMAO), exhibit high activities towards ethylene polymerization, producing strictly linear polyethylenes with terminal vinyl groups. The catalytic performances are systematically investigated along with various polymerization parameters as well as the microstructures of resultant polyethylenes. The steric hindrances of ortho-cycloalkyl substituents of N_imino-aryl groups significantly affect the activities of the corresponding iron precatalysts as well as the microstructures of resultant polyethylenes: higher steric hindrance the ortho-cycloalkyl substituents, higher activity the iron precatalyst, lower molecular weight the resultant polyethylenes. Experimental observations are additionally supported by the computational study. The resultant polyethylenes exhibited excellent hydrophobicity.     

Carbon–nitrogen bond dissociation energy values in C-nitrosocompounds

Measurements of the D(R? NO) bond strength in some C-nitrosocompounds have been made using an electron impact method. The appearance potential of the radical ion (R⁺) has been determined, the D(R? NO) bond energy being obtained from the relation The values obtained are: D(C₆H₅? NO) = 41 kcal/mole, D(t-C₄H₉? NO) = 34 kcal/mole, D(t-C₅H₁₁? NO) = 36 kcal/mole and D(i-C₃H₇? NO) = 36.5 kcal/mole. These values are in good agreement with the numerous estimations of Benson and coworkers and confirm that the C? N bond strength in C-nitrosocompounds is very much less than in nitrocompounds or in amines.     

Transition-metal mediated heteroatom removal by reactions of FeL+ [L=O,C4H6, c-C5H6, c-C5H5, C6H6, C5H4(=CH2)] with furan,thiophene, and pyrrole in the gas phase

Reactions of Fe⁺ and FeL⁺ [L=O, C₄H₆, c-C₅H₆, C₅H₅, C₆H₆, C₅H₄(=CH₂)] with thiophene, furan, and pyrrole in the gas phase by using Fourier transform mass spectrometry are described. Fe⁺, Fe(C₅H₅)⁺, and FeC₆H ₆ ⁺ yield exclusive rapid adduct formation with thiophene, furan, and pyrrole. In addition, the iron-diene complexes [FeC₄H ₆ ⁺ and Fe(c-C₅H₆)⁺], as well as FeC₅H₄(=CH₂)⁺ and FeO⁺, are quite reactive. The most intriguing reaction is the predominant direct extrusion of CO from furan by FeC₄H₆ ⁺, Fe(c-C₅H₆)⁺, and FeC₅H₄(=CH₂)⁺. In addition, FeC₄H ₆ ⁺ and Fe(c-C₅H₆)⁺ cause minor amounts of HCN extrusion from pyrrole. Mechanisms are presented for these CO and HCN extrusion reactions. The absence of CS elimination from thiophene may be due to the higher energy requirements than those for CO extrusion from furan or HCN extrusion from pyrrole. The dominant reaction channel for reaction of Fe(c-C₅H₆)⁺ with pyrrole and thiophene is hydrogen-atom displacement, which implies D^O(Fa(N₅H₅)⁺-C₄H₄X)>D^O(Fe(C₅H₅)⁺-H)=46±5 kcal mol^?1. D^O(Fe⁺-C₄H₄S) and D^O(Fe⁺-C₄H₅N)=D^O(Fe⁺-C₄H₆)=48±5 kcal mol^?1. Finally, 55±5 kcal mol^?1=D^O(Fe⁺-C₆H₆)>D^O(Fe⁺-C₄H₄O)>D^O(Fe⁺-C₂H₄)=39.9±1.4 kcal mol^?1. FeO⁺ reacts rapidly with thiophene, furan, and pyrrole to yield initial loss of CO followed by additional neutral losses. D^O(Fe⁺-CS)>D^O(Fe⁺-C₄H₄S)≈48±5 kcal mol^?1 and D^O(Fe⁺-C₄H₅N)≈48±5 kcal mol^?1>D^O(Fe⁺-HCN)>D^O(Fe⁺-C₂H₄)=39.9±1.4 kcal mil^?1.     

The use of transition-state theory to extrapolate rate coefficients for reactions of oh with alkanes

A method is described for extrapolating existing experimental data on the reactions of OH radicals with alkanes to higher temperatures using conventional transition-state theory. Expressions are developed for the estimation of the structural properties of the activated complex necessary for calculating ΔS^± and ΔH^±. The vibrational frequencies and internal rotations of the activated complex are given by those of the reacting alkane or the analogous alcohol and a set of additional internal modes that is the same for all OH + alkane reactions considered. Differences between primary, secondary, and tertiary hydrogen attack are discussed, and the validity of representing the activated complexes of all OH + alkane reactions by a fixed set of vibrational frequencies and other internal modes is evaluated. Calculations are presented for the reaction of OH with CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, i-C₄H₁₀, c-C₄H₈, c-C₅H₁₀, c-C₆H₁₂, (CH₃)₂CHCH(CH₃)₂, (CH₃)₃CCH(CH₃)₂, (CH₃)₄C, and (CH₃)₃CC(CH₃)₃, and the results are compared with experiments.     

Synthesis of the first metallacarborane triple-decker complexes with a central cyclopentadienyl ligand

The previously unknown metallacarboranes (η-C₅R₅)Ru(η-9-Me₂S-7,8-C₂B₉H₁₀) (R=H or Me) and (η-C₅H₅)Ni(η-9-Me₂S-7,8-C₂B₉H₁₀) were prepared and used in the synthesis of the first metallacarborane triple-decker complexes with a central cyclopentadienyl ligand, viz., [(η-C₅R₅)Ru(μ-η:η-C₅Me₅)Ru(η-9-Me₂S-7,8-C₂B₉H₁₀)]PF₆ (R=H or Me), [(η-9-Me₂S-7,8-C₂B₉H₁₀)Ni(μ-η:η-C₅H₅)Ni(η-9-Me₂S-7,8-C₂B₉H₁₀)]PF₆, and [(η-C₅H₅)Ni(μ-η:η-C₅H₅)Ni(η-9-Me₂S-7,8-C₂B₉H₁₀)]BF₄. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1368–1373, July, 1999.     

Temperature dependence of the relative rate constants of the reactions of alkanes with oh radicals in aqueous solution

A study was carried out on the rate constant ratio (k _RH/k _EtH) in reactions of alkanes C₃H₈, n-C₄H₁₀, n-C₅H₁₂, n-C₆H₁₄, i-C₄H₁₀, c-C₅H₁₀, and c-C₆H₁₂ with OH radicals in water at 5-55°C and the relative activation parameters A _RH/A _EtH and E _EtH – E _RH. The values of E _EtH – E _RH in water and the gas phase have opposite signs. The values of k _RH/k _EtH decrease with increasing temperature in the gas phase but increase in water. The behavior of these reactions in water may be attributed to a solvent cage effect.     

Three ginkgolide hydrates from Ginkgo biloba L.: ginkgolide A monohydrate,ginkgolide C sesquihydrate and ginkgolide J dihydrate,all determined at 120 K

A low‐temperature structure of ginkgolide A monohydrate, (1R,3S,3aS,4R,6aR,7aR,7bR,8S,10aS,11aS)‐3‐(1,1‐dimethylethyl)‐hexa­hydro‐4,7b‐di­hydroxy‐8‐methyl‐9H‐1,7a‐epoxymethano‐1H,6aH‐cyclo­penta­[c]­furo­[2,3‐b]­furo­[3′,2′:3,4]­cyclopenta­[1,2‐d]­furan‐5,9,12(4H)‐trione monohydrate, C₂₀H₂₄O₉·H₂O, obtained from Mo Kα data, is a factor of three more precise than the previous room‐temperature determination. A refinement of the ginkgolide A monohydrate structure with Cu Kα data has allowed the assignment of the absolute configuration of the series of compounds. Ginkgolide C sesquihydrate, (1S,2R,3S,3aS,4R,6aR,7aR,7bR,8S,10aS,11S,11aR)‐3‐(1,1‐di­methyl­ethyl)‐hexa­hydro‐2,4,7b,11‐tetrahydroxy‐8‐methyl‐9H‐1,7a‐epoxy­methano‐1H,6aH‐cyclopenta­[c]­furo­[2,3‐b]­furo­[3′,2′:3,4]­cyclo­penta­[1,2‐d]­furan‐5,9,12(4H)‐trione sesquihydrate, C₂₀H₂₄O₁₁·1.5H₂O, has two independent diterpene mol­ecules, both of which exhibit intramolecular hydrogen bonding between OH groups. Ginkgolide J dihydrate, (1S,2R,3S,3aS,4R,6aR,7aR,7bR,8S,10aS,11aS)‐3‐(1,1‐di­methyl­ethyl)‐hexa­hydro‐2,4,7b‐tri­hydroxy‐8‐methyl‐9H‐1,7a‐epoxy­methano‐1H,6aH‐cyclo­penta­[c]­furo­[2,3‐b]furo[3′,2′:3,4]­cyclo­penta­[1,2‐d]­furan‐5,9,12(4H)‐trione dihydrate, C₂₀H₂₄O₁₀·2H₂O, has the same basic skeleton as the other ginkgolides, with its three OH groups having the same configurations as those in ginkgolide C. The conformations of the six five‐membered rings are quite similar across ­ginkgolides A–C and J, except for the A and F rings of ginkgolide A.     

η-Alkynyl and vinylidene transition metal complexes: 10. Reaction of the metal-acetylide [(η-C5H5)(CO)(NO)W---CC---C(CH3)3]Li with 1,2-diiodoethane as electrophile and with various nucleophiles

Treatment of the η¹-acetylide complex [(η⁵-C₅H₅)(CO)(NO)W---CC---C(CH₃)₃]Li (4) with 1,2-diiodoethane in THF at −78 °C, followed by the addition of Li---CC---R [R=C(CH₃)₃, C₆H₅, Si(CH₃)₃, 6a–6c] or n-C₄H₉Li and protonation with H₂O, afforded the corresponding oxametallacyclopentadienyl complexes (η⁵-C₅H₅)W(I)(NO)[η²-O=C(CC---R)CH=CC(CH₃)₃] (7a–7c), 8c and (η⁵-C₅H₅)W(I)(NO)[η²-O=C(n-C₄H₉)CH=CC(CH₃)₃] (9). The formation of these metallafuran derivatives is rationalized by the electrophilic attack of 1,2-diiodoethane onto the metal center of 4 to form first the neutral complex [(η⁵-C₅H₅)(I)(CO)(NO)W---CC---C(CH₃)₃] (5). Subsequent nucleophilic addition of Li---CC---R 6a–6c or n-C₄H₉Li and a reductive elimination step followed by protonation leads to the products 7a–7c and 9. One reaction intermediate could be trapped with CF₃SO₃CH₃ and characterized by a crystal structure analysis. The identity of another intermediate was established by infrared spectroscopic data. The oxametallacyclopentadienyl complex 10 forms in the presence of excess 1,2-diiodoethane through an alternative pathway and crystallizes as a clathrate containing iodine.     

Reactions of nucleophilic addition of primary amines to the nitrilium derivative of the <Emphasis Type="Italic">closo</Emphasis>-decaborate anion [2-B<Subscript>10</Subscript>H<Subscript>9</Subscript>(N≡CCH<Subscript>3</Subscript>)]<Superscript>−</Superscript>

Compounds (Bu₄N)[2-B₁₀H₉{NH=C(NHR)CH₃}]⁻ are obtained by reactions of the tetrabutylammonium salt of the [2-B₁₀H₉(N≡CCH₃)]⁻ anion with aliphatic and aromatic primary amines RNH₂ (R = n-C₃H₇, n-C₄H₉, cyclo-C₅H₉, C₆H₅, cyclo-C₆H₁₁, n-C₆H₁₃, C₇H₇, C₈H₈NH₂, C₆H₄NO₂, and C₁₈H₃₇) and identified by IR, ESI/MS, and NMR (¹H, ¹¹B, and ¹³C) spectroscopy. The structures of the amidine-type derivatives [2-B₁₀H₉{Z-NH=C(NH-cyclo-C₅H₉)CH₃}]⁻ and [2-B₁₀H₉{Z-NH=C(NH-C₇H₇)CH₃}]⁻ are determined by X-ray diffraction.     

Studies on the composition and kinetics of chromium(III)-alanine system

Kinetics of the complex formation of chromium(III) with alanine in aqueous medium has been studied at 45, 50, and 55°C, pH 3.3–4.4, and μ = 1 M (KNO₃). Under pseudo first-order conditions the observed rate constant (k_obs) was found to follow the rate equation: Values of the rate parameters (k_an, k, K_IP, and K) were calculated. Activation parameters for anation rate constants, ΔH^≠(k_an) = 25 ± 1 kJ mol^?1, ΔH^≠(k) = 91 ± 3 kJ mol^?1, and ΔS^≠(k_an) = ?244 ± 3 JK^?1 mol^?1, ΔS^≠(k) = ?30 ± 10 JK^?1 mol^?1 are indicative of an (I_a) mechanism for k_an and (I_d) mechanism for k routes (‥substrate Cr(H₂O) is involved in the k route whereas Cr(H₂O)₅OH²⁺ is involved in k′ route). Thermodynamic parameters for ion-pair formation constants are found to be ΔH°(K_IP) = 12 ± 1 kJ mol^?1, ΔH°(K) = ?13 ± 3 kJ mol^?1 and ΔS°(K_IP) = 47 ± 2 JK^?1 mol^?1, and ΔS°(K) = 20 ± 9 JK^?1 mol^?1.     

Disproportionation reactions between alkyl and fluoroalkyl radicals. IV. Pentafluoroethyl and ethyl radicals

A new determination of the disproportionation/combination ratio for C₂F₅ and C₂H₅ radicals gives a value of Δ(C₂F₅, C₂H₅) = 0.24 ± 0.02, independent of temperature. The cross-combination ratio for the two radicals was found to increase with temperature and the significance of this is discussed in evaluating Δ.     

Optically active transition-metal compounds: XXII. Stereochemistry and crystal structure determination of (η5-C5H5)CoI(NC4H3C(R)=N(S)-CH(CH3)(C6H5)) (R = H,CH3)

The crystal structures and absolute configurations of (η⁵-C₅H₅)-CoI(NC₄H₃-C(R)=N(S)-CH(CH₃)(C₆H₅)) (R = H, compound I; R = CH₃, compound II) have been determined by single crystal X-ray diffraction. Crystals of compound I are orthorhombic, with a 11.084(6), b 12.107(6) and c 13.121(7) Å, space group ^P2₁2₁2₁ and d (calcd, Z = 4) 1.69 g cm^?3 The structure was solved by the Patterson technique and refined with use of full matrix least-squares methods to R(F) = 0.031 and R_w(F) = 0.028. Compound II is nearly isomorphous and isostructural; a 11.246(6), b 11.923(6) and c 13.370(7) Å, d(calc., Z = 4) 1.71 g cm^?3 and was refined to the final agreement factors of R(F) = 0.044 and R_w(F) = 0.035. The Co atom has a distorted tetrahedral coordination, with Co-I 2.595(2) for I and 2.607(2) Å for II; Co-(η⁵-C₅H₅ ring centroid) 1.681(4) and 1.703(5) Å; Co-N(pyrrole) 1.905(9) and 1.885(9) Å; Co-N(imine) 1.971(8) and 2.003(9) Å, all the parameters being well within values found in the literature. The configuration around the chiral carbon of the phenylethylamine is S for both compounds, whereas the configuration around the metal is R in I and S in II. The different metal configurations in I and II have their origin in the two different substituents (R = H, CH₃) at the imine carbon atoms of the chelate ring, which induce completely different conformations of the (S)-CH(CH₃)(C₆H₅) moiety in the two complexes. For both compounds the thermodynamically less stable isomer is enriched upon crystallization. Also, for compound I the solution and solid state conformations are almost opposite to each other, the conformation in the solid reflecting intramolecular interactions (phenyl/C₅H₅ attraction).     

π-complexes of monoanionic carborane ligand [9-(Me2S)-7,8-C2B9H10]− with [η-C5R5Fe]+ (R=H, Me) and [η-C4Me4Co]+ cationic fragments

Compounds (η-C₅R₅)Fe[η-9-(Me₂S)-7,8-C₂B₉H₁₀] (R=H, Me) and (η-C₄Me₄)Co[η-9-(Me₂S)-7,8-C₂B₉H₁₀] were synthesized by the reactions of Na[9-(Me₂S)-7,8-C₂B₉H₁₀] with complexes [(η-C₅H₅)Fe(MeCN)₃]PF₆, [(η-C₅Me₅)Fe(MeCN)₃]BF₄, and [(η-C₄Me₄)Co(MeCN)₃]PF₆, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 177–179, January, 1999.     

Study of a molybdenum dithiocarboxylato complex. Chemical characterization,crystal and molecular structure of tetrakis(α-dithionaphthoato)molybdenum(IV)

Summary The complex Mo(-C₁₀H₇CS₂)₄ has been prepared from several starting materials: [Mo(NNHPh)₂(butane-2,3-diolate)₂] · H₂NNHPh, [MoCl(NNMe₂)₂(PPh₃)₂]⁺Cl^–, [MoO₂ (MeCHOCHOHMe)₂] · 2MeCHOHCHOHMe or [(C₄H₉)₄N]₆Mo₇O₂₄, reacted with-C₁₀H₇CS₂H. The complex Mo(-C₁₀H₇CS₂)₄ crystallizes from CH₂Cl₂-Et₂O in the orthorhombic space group Pbca,a=13.655(3)Å,b=21.707(5)Å,c= 26.365(2)Å, V=7814.81ų, Z=8; 5075 reflections collected, 2723 used in solution to give R=0.0517, R_w=0.0564. The molybdenum is eight coordinate with geometry approximating to aD _2d dodecahedron. The average Mo-S bond lengths are 2.526(3)Å and 2.479(3)Å for the dodecahedrala andb sites, respectively.