以混旋邻氯扁桃酸为模板的分子印迹聚合物的制备及拆分性能研究

以混旋邻氯扁桃酸为模板分子和合成的(S)-(1-萘乙基)-丙烯酰胺为手性功能 单体制备分子印迹聚合物作为色谱固定相，对混旋邻氯扁桃酸有较好的拆分能力， 分离因子α达到1.36。但对模板分子的类似物混旋扁桃酸和对氯扁桃酸没有拆分能 力。用Hyperchem软件模拟了(S)-邻氯扁桃酸与(S)-(1-萘乙基)-丙烯酰胺形成的复 合物的结构模型，其在聚合物母体中留下的具有立体构型和作用力双重识别的S-S 型空穴，对(S)-邻氯扁桃酸有较强的保留作用，从而达到对混旋物拆分的目的。     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

Scalemic and racemic imprinting with a chiral crosslinker

The development of molecularly imprinted chiral stationary phases has traditionally been limited by the need for a chiral pure template. Paradoxically, availability of a chiral pure template largely defeats the purpose of developing a chiral stationary phase. To solve this paradox, imprinting of scalemic and racemic template mixtures was investigated using both chiral (N-α-bismethacryloyl-l-alanine) and achiral (N,O-bisacrylamide ethanolamine) crosslinkers. Imprinting of scalemic mixtures provided polymers capable of partial separation of Boc-tyrosine enantiomers with virtually the same results when using either the chiral or achiral crosslinker. However, the chiral crosslinker was required for chiral differentiation by the racemic imprinted polymers which were evaluated in both batch rebinding and chromatographic modes. Batch rebinding analysis revealed intersecting binding isotherms for the L- and D-Boc-tyrosine, indicating bias for the D or L enantiomer is concentration dependent. Partial chromatographic separation was achieved by the racemic imprinted polymers providing variable D or L bias in equal probability over multiple replicates of polymer synthesis. Correlation of enantiomer bias with the batch rebinding results and optimization of HPLC parameters are discussed.     

Gas Chromatographic Separation of Enantiomers on Optically Active Metal-Complex-Free Stationary Phases. New Analytical Methods (24)

If a stationary phase A employed in gas chromatography possesses a chemical affinity for substance B, which is to be separated, then the retention behavior is not only determined by the normal physical equilibrium between the gas and liquid phases but also by the chemical equilibrium A + B ? AB. If A and B are chiral and A is present in optically active form while B is a racemic mixture, then it is possible to achieve a gas chromatographic enantiomer resolution without the isolation of diastereomers: the energetically different diastereomeric associates A_R B_R and A_R B_S are formed rapidly and reversibly. This enantiospecific resolution principle was first demonstrated in 1966 by the quantitative resolution of racemic amino acid derivatives on optically active peptide phases in analogy to the well-known stereospecificity of enzymes. The anchoring of the chiral resolving agent to thermally stable polysiloxanes together with the employment of high resolution capillary columns and the use of appropriate derivatization strategies has led to the development of enantiomer resolution into a routine modern method for many classes of substances. The demonstration of enantiospecificity in the gas chromatographic separation process is of fundamental interest, and its systematic study can result in a significant contribution to the understanding of the molecular mechanism of “chiral recognition”. The gas chromatographic separation of enantiomers has also proven to be an accurate and sensitive method for the determination of the enantiomeric composition of natural products and products of enantioselective transformations (asymmetric syntheses, “chiral pool” transformations, kinetic resolutions, biomimetic reactions) and for the quantification of racemization, e.g. in the synthesis and hydrolysis of peptides. In any research program devoted to the phenomenon of chirality, the gas chromatographic separation of the enantiomers of volatile compounds constitutes an indispensable modern instrumental technique.     

电色谱模式下四肽印迹整体柱分子识别机理的研究

本文采用原位聚合法制备了以四肽YPLG为模板的毛细管分子印迹整体柱,在毛细管电色谱模式下以模板分子和它的结构类似物YPGL为样品,对分子印迹聚合物的识别机理进行了研究。这两种四肽由于化学结构相似且等电点非常相近,普通的电色谱和毛细管电泳方法分离非常困难。但我们的实验表明,印迹整体柱对模板分子具有特异性识别能力,因此YPLG与YPGL之间的分离因子为1.73,分离度达3.72。实验中系统地研究了流动相中有机溶剂的含量、缓冲溶液的pH值、缓冲溶液的盐浓度以及柱温对四肽识别的影响。实验中我们观察到模板在印迹柱上具有非线性的Van’t Hoff行为,揭示可能存在多重保留机理。本研究结果表明,在毛细管电色谱模式下,分子印迹整体柱的分子识别主要决定于样品与印迹聚合物之间的氢键作用以及印迹孔穴的三维结构。     

Direct HPLC Resolution of Racemic Nomifensine Hydrogen Maleate Using a Chiral Beta-Cyclodextrin-Bonded Stationary Phase

Abstract

A direct liquid chromatographic method was developed for the optimization of separation of racemic S, R-nomifensine hydrogen maleate, a psychotropic drug, this was achieved without any derivatization, using a β-cyclodextrin-bonded phase column. A separation factor of 1.46 and resolution of 4.30 were obtained for the enantiomers of nomifensine hydrogen maleate. The effect of pH, temperature and methanol content in mobile phase on retention and enantioselectivity of nomifensine hydrogen maleate was also demonstrated.     

Recognition of 6-benzyladenine using a molecularly imprinted membrane on a cellulose acetate support

A molecularly imprinted polymer membrane was prepared on a cellulose acetate support by the photopolymerization of methacrylic acid and a cross linker, ethyleneglycol dimethacrylate, in the presence of the template molecules of 6-benzyladenine (BA). The polymeric membrane morphologies were visualized by scanning electron microscopy and its selectivity was evaluated by a permeation test. The association ratio and apparent association constant of the complex formed between the methacrylic acid and BA were determined by cyclic voltammetry, and are 1 : 1 and 204.9, respectively. These results indicated that there existed some complementary cavities on the imprinted membrane corresponding in size, shape, and functional groups to the template molecules of BA. Hence, the imprinted membrane was able to recognize BA. It is predicted that this molecularly imprinted membrane may be applicable to the assay of BA or for the preparation of a molecularly imprinted polymer sensor for the determination of BA in plant samples. The text was submitted by the authors in English.     

Evaluation of A Chiral Crown Etherlc Column For the Separation of Racemic Amines

Abstract

Enantiomeric resolution of more than fifty racemic primary amines can be achieved on a column that utilizes a crown ether as a chiral selector. the racemic solute is solubilized in an acidic solvent, forming an ammonium ion from the primary amine functional group. an interaction between the lone pair electrons on the oxygens of the crown ether and the positive charge of the ammonium group leads to the formation of an inclusion complex. Due to the chirality of the crown ether there is stereoselective interaction resulting in enantiomeric separation. Excellent resolution is possible for amino acids, amino alcohols, amino esters and amines. Compounds are separated that were poorly resolved by conventional ligand exchange columns and by other means.     

Direct Chiral Liquid Chromatographic Separation of Tocainide Enantiomers on a Crownpak (Cr) Column and its Application to Pharmaceutical Formulations and Biological Fluids

Abstract

Direct chiral liquid chromatographic resolution of racemic tocainide was accomplished without any derivatization using a crownpak CR(+) column as a chiral stationary phase. The stereochemical resolution (R) with symmetrical peaks was 0.97 and a separation factor (α) of 1.44 were obtained. Optimization of separation was achieved using different concentrations of perchloric acid.     

Chiral separation of enantiomeric 1,2-diamines using molecular imprinting method and selectivity enhancement by addition of achiral primary amines into eluents.

The imprinted polymers based on a transient complex formation between methacrylic acid and template molecules were prepared by using methacrylic acid and ethylene dimethacrylate as a cross-linking agent. The template molecules used were (R,R)-cyclohexanediamine (1), (S,S)-1,2-diphenylethylenediamine (2) and (S)-1,1'-binaphthyl-2,2'-diamine (3). Another group of templates were those in which the amino group of these templates had been substituted by the hydroxy group: (R,R)-1,2-cyclohexanediol (4) and (S,S)-hydrobenzoin (5). Racemic 2 was separated by the polymer prepared with template 2 (P2) and that with template 1 (P1). Template 2 is larger than template 1 in steric bulkiness, but P1 was effective for the enantiomer separation of racemic 2. P1 was not effective for the separation of racemic 4. Enantioselectivity observed in racemic 2 in P2 was higher than that in racemic 1 in P1. P2 has no definite predetermined shape for solute 1, but it was capable of separating racemic 1. This separation should be thus ascribed to the orientation of at least two carbonyl groups reflecting the conformation of template 2 in P2 cavity. Racemic 5, having the same configuration of the two bulky phenyl groups as that of solute 2, was separated in P2. When the primary amines such as propylamine, cyclohexylamine and 1-adamantanamine were added into the acetic acid-methanol mixtures as eluents, both enantioselectivity and retentivity for racemic 2 were enhanced along with the remarkable peak tailing.     

MOLECULAR IMPRINTED POLYMERS—Novel Polymer Adsorbents

Molecular imprinted polymers(MIPs) are novel functional polymer materials and known as specific adsorbents for the template molecules,These novel functional polymers have promised potential applications in racemic resolution,sensor,chromatography,adsorptive separation and other fields.This review exhibits the approach for preparing MIPs,the features of MIPs obtained by different routes and the characteristics of adsorptive separations with MIPs.The molecular recognition mechanism and the idea of the present possibilities and limitations of molecular imprinting polymerization are discussed as well.     

MOLECULAR IMPRINTED POLYMERS——Novel Polymer Adsorbents

1. INTRODUCTIONMolecular imprinted polymers (MIPs) have attracted wide attention for its molecular recognition properties. More and more publications involved in the area of adsorption and separation with MIPs. As early as in 1931, Poljacov [1] found that the pore structure of silica gel was influenced by the size and shape of the molecules in the gas atmosphere when he removed water from the gel under the atmosphere of benzene, toluene and xylene. The gel dried in benzene atmosphere a…     

Investigation of enantiomer recognition of molecularly imprinted polymeric monoliths in pressurized capillary electrochromatography screening the amino acids and their derivatives

Molecularly imprinted monolithic columns were prepared for chiral separation of tyrosine and its amino acid derivatives by in situ therm-initiated copolymerization of methacrylic acid, 4-vinylpyridine and ethylene glycol dimethacrylate. The enantiomers were rapidly separated on monolithic columns in less than 10 min by pressurized capillary electrochromatography (pCEC). The influences of several parameters such as the content of cross-linking monomer on the composition of the pre-polymerization mixture were systematically investigated. The influence of the pCEC conditions including the composition of the mobile phase was also optimized to obtain the good enantioseparation. It was found that in addition to molecularly imprinted recognition, chromatographic retention and electrophoretic migration play important roles in the retention and chiral recognition of molecularly imprinted polymer (MIP) columns. The cross-selectivity for similar amino acids and its derivatives were systematical investigated for understanding the recognition mechanism on the MIP monolithic columns. The results indicated that molecularly imprinted polymer recognizes the template molecule by its molecular shape defined binding cavity.     

Open tubular layer of S‐ofloxacin imprinted polymer fabricated in silica capillary for chiral CEC separation

An open tubular molecule imprinted polymer (OT‐MIP) capillary column has been prepared for chiral separation of ofloxacin enantiomers in CEC. The S‐ofloxacin imprinted OT column was fabricated by thermally initiated non‐covalent polymerization procedure inside a pretreated and silanized fused silica capillary. The template molecule was incorporated with methacrylic acid (MAA), ethylene glycol dimethacrylate (EDMA) and 4‐styrenesulfonic acid (4‐SSA) and dissolved in a porogen mixture of ACN/2‐propanol (9:1). The separation efficiency of the 4‐SSA MIP column was found quite better than that of the MIP column without 4‐SSA. It has been demonstrated that our OT‐MIP column can separate ofloxacin enantiomers with excellent chiral separation efficiency after tuning the various chromatographic conditions. The optimized chromatographic eluent was 85:15, v/v%, ACN/60 mM sodium acetate at pH 7. The separation efficiency and selectivity of chiral separation of this study were far better than those obtained by previous methods for chiral separation of R‐ and S‐ofloxacin.     

Molecularly imprinted sol-gel nanotubes membrane for biochemical separations

In this study, we report a simple procedure for applying molecular imprinting functional groups to the inner surfaces of the template-synthesized sol-gel nanotubes for chemical separation of estrone. The silica nanotubes were synthesized within the pores of nanopore alumina template membranes using a sol-gel method by simultaneous hydrolysis of a silica monomer-imprinted molecule complex and tetraethoxysilane (TEOS). A covalent imprinting strategy was employed by generating a sacrificial spacer through the reaction of the isocyanate group of 3-(triethoxysilyl)propyl isocyanate and a phenol moiety of estrone to form a thermally cleavable urethane bond. This allowed us to remove the imprinted estrone by simple thermal reaction and to simultaneously introduce functional groups into the cavity formed by the silica nanotubes. Experiments indicated that estrone could be bound selectively by such an approach and have a binding affinity of 864 +/- 137 (n = 3).     

Study on composite membranes with high selective permeance properties

Flavonoids are natural products having several biological and physiological properties depending upon their molecular configurations. Flavonoids with similar configuration cannot be separated by traditional separation method and membrane separation technology whose selectivity is lower. This work investigates composite membranes with structural and functional molecular recognition properties prepared according to molecular imprinted technology. Functional silica sol was synthesized by taking luteolin as the template (or imprinting) molecule, γ-aminopropyltriethoxysilane (γ-APTS) as the functional monomer, and tetraethoxysilane (TEOS) as the cross-linker. The resultant functional silica sol was coated on Al₂O₃ microporous substrate followed by the removal of the template molecule. Scanning electron microscope micrographs showed a 5 μm thickness composite membrane with uniformly distributed porosity. Steady state flux was reached at ∼70 min at 215 L m⁻² h⁻¹ for the composite membrane, while a lower value of 168 L m⁻² h⁻¹ was measured for the blank membrane (i.e. non-templated). Further, in an aqueous mixture containing similar template molecules, the selectivity factor of luteolin to rutin was 14.1, thus suggesting that the imprinting process allowed for preferential permeance and affinity selectivity to the template molecule (i.e. luteolin). These results strongly suggest the formation of cavities, which are joined by channels to deliver the percolative effect for the permeation of luteolin. In addition to structural formation, further site recognition properties were accomplished by the functional silica sol in the composite matrix by electrovalent bonds. Considering the percolative effect in tandem with electrovalent bonds and under the influence of a concentration gradient (i.e. driving force), a mechanism of molecular recognition was proposed based on the molecular bond, followed by bond cutting and jumping to another site to form another molecular bond. The preparation method of the composite membrane was applied to other template molecules, and the template molecules can selectively permeate the membrane. So the method was universal for other substance. So it made it possible for the separation of the natural products exactly and efficiently. At the same time, it had great potential for the resolution of the chiral drugs and the preparation of the new membrane reactor.     

几种苯甲酰胺类抗精神病药物的手性色谱拆分及其对映体含量的测定

采用直链淀粉-三(5-氯-2-甲基苯基氨基甲酸酯)手性固定相(CSP),以0.1%二乙胺正己烷和0.1%二乙胺乙醇为流动相梯度洗脱,以舒必利、阿米舒必利和莫沙必利为目标物,利用高效液相色谱法研究了这3种苯甲酰胺类药物的手性色谱分离行为。分别考察了流动相组成、添加剂及柱温对3种药物对映体分离的影响,从热力学和结构上探讨了色谱拆分的机理。结果表明: 在优化的色谱条件下,舒必利、阿米舒必利和莫沙必利对映体的分离度Rs＞1.5;计算了3种药物对映体的色谱保留因子k和分离因子α,以及与CSP相互作用的热力学函数,其相互作用大小依次为舒必利＞阿米舒必利＞莫沙必利。已将该方法成功地应用于上述3种药物片剂和血清中其对映体的测定,方法简便、准确、可靠。     

Preparation and characterization of a molecularly imprinted monolithic column for pressure‐assisted CEC separation of nitroimidazole drugs

A polymethacrylate‐based molecularly imprinted monolithic column bearing mixed functional monomers, using non‐covalent imprinting approach, was designed for the rapid separation of nitroimidazole compounds. The new monolithic column has been prepared via simple in situ polymerization of 2‐hydroxyethyl methacrylate, dimethylaminoethyl methacrylate and ethylene dimethacrylate, using (S)‐ornidazole ((S)‐ONZ) as template in a binary porogenic mixture consisting of toluene and dodecanol. The composition of the polymerization mixture was systematically altered and optimized by altering the amount of monomers as well as the composition of the porogenic solvent. The column performance was evaluated in pressure‐assisted CEC mode. Separation conditions such as pH, voltage, amount of organic modifier and salt concentration were studied. The optimized monolithic column resulted in excellent separation of a group of structurally related nitroimidazole drugs within 10 min in isocratic elution condition. Column efficiencies of 99 000, 80 000, 103 000, 60 000 and 99 000 plates/m were obtained for metronidazole, secnidazole, ronidazole, tinidazole and dimetridazole, respectively. Parallel experiments were carried out using molecularly imprinted and non‐imprinted capillary columns. The separation might be the result of combined effects including hydrophobic, hydrogen bonding and the imprinting cavities on the (S)‐ONZ‐imprinted monolithic column.     

Novel stereoselective molecularly imprinted polymers via ring-opening metathesis polymerisation

Stereoselective molecularly imprinted polymers (MIPs) have been synthesised via ring-opening metathesis polymerisation, in essentially, quantitative yield. A covalent imprinting strategy was followed during the network formation of the chiral sorbent. Recognition of the substrate however involved non-covalent interactions; a combination of hydrogen bonding and the chiral environment presented by the imprinted cavities. The enantiomeric excess achievable with these new MIPs is solvent dependent and stereoselectivities of up to 20% e.e. (separation factor α=2.2) were found in batch equilibrations.     

Molecularly imprinted stationary phase prepared by reverse micro-emulsion polymerization for selective recognition of gatifloxacin in aqueous media

A new stationary phase for selectively recognizing gatifloxacin in aqueous media based on molecularly imprinted microspheres (MIMs) has been prepared by water/oil reverse micro-emulsion polymerization. The MIMs were prepared using gatifloxacin as the template, N, N'-methylenebisacrylamide as cross-linker and acrylamide and acryloyl-β-CD (β-CD-A, synthesized by ester reaction of acrylic acid with β-CD) as combinatorial functional monomers. The surface morphology of MIMs was characterized by scanning electron microscopy. The properties of MIMs recognition for gatifloxacin in water were studied by adsorption kinetics, adsorption isotherms combined with Scatchard analysis and selective recognition experiments. The results showed that the synthesized MIMs had an excellent ability to selectively recognize gatifloxacin in aqueous media. MIMs were employed as the chromatographic stationary phase to successfully separate the template gatifloxacin from its analogues. Discovering the mechanism of the MIMs recognition revealed that the memory cavities in the surface of the MIMs and hydrophobic effects between the template and the cavities of the β-CD residues were the primary contributions to the special recognition process.