An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

Large Volume Injection of Biological Samples Dissolved in a Non-Eluting Solvent: A Way to Increase Sensitivity and a Means of Automating Drug Determination Using Hplc

Abstract

The injected volume of a sample dissolved in the mobile phase of an HPLC system must be maintained as small as possible so as to minimize the loss in efficiency. Generally this requirement limits the sensitivity of HPLC methods devoted to trace quantity determinations of drugs in biological fluids. In order to avoid this limitation and to increase the effective sensitivity of HPLC methods for determination of drugs such as antrafenine, nifuroxazide and cipropride, the samples were dissolved in a non-eluting solvent and a large volume (> 100 μl) was injected on to the chromatographic column.

The above-mentioned compounds and their internal standards were dissolved in a series of eluting and non-eluting solvents and increasing volumes (5 to 1000 μl) were injected. Peaks corresponding to injections made in an eluting solvent showed retention times independent of the injection volume but their variances increased with the volume injected. In contrast, peaks corresponding to injections made in a non-eluting solvent, similar to the mobile phase, had a variance independent of the injection volume but their retention times increased linearly with the injection volume. The repeated injection of such non-eluting solvents had no influence on chromatographic behaviour. Peaks corresponding to compounds injected in a non-eluting solvent made with components different from those of the mobile phase had a variance independent of the injection volume but their retention times varied both with the injection volume and with the interval between injection.

The application of non-eluting solvents has been defined theoretically and it has been demonstrated that solutions composed of 25% of the mobile phase diluted with the least eluting of its components act as non-eluting solvents and can be injected in large volume without loss in efficiency. This feature could be used to inject all the samples volume or only part of it, manually or automatically, since any automatic injector can be used with large volumes.

Thus, using the relatively simple procedure of making injections with a non-eluting solvent it is possible to increase both sensitivity and the rate of sample analysis.     

Solvent Effects in Reversed Phase Liquid Chromatooraphy for High and Low Loadings of Octadecylsilane on Microparticle Silica. I

Abstract

The selectivity of two ODS bonded phase packings, one with a high carbon load, the other with a low carbon load, were investigated. Many organic solvent/water mobile phases were used with three sample mixtures of varying polarity. When the separations were normalized, trends in the solubility parameters of the various classes of organic solvents were noted. Analyzing the separation factors and considering possible mobile phase, solute, and bonded phase interactions furnished some insight into possible separation/selectivity mechanisms.     

Effect of large volume injection of hydrophobic solvents on the retention of less hydrophobic pharmaceutical solutes in RP-LC

Injection of large volumes of samples in solvents other than mobile phase composition has been proved for some less hydrophobic compounds. Thus, the retention behavior of several compounds of pharmaceutical interest (isosorbide-2-nitrate, isosorbide-5-nitrate, tropicamide, pentoxifylline, and methyl p-hydroxybenzoate) was studied by using different hydrophobic solvents (n-hexane, n-heptane, or i-octane) as sample solvents. Two types of stationary phases were used: octyl and octadecyl modified silica (both of Zorbax Eclipse type). The experiments showed a linear dependence between capacity factor of each solute and sample injection volume, up to maximum volume values of about 680 microL for C8 stationary phase and 580 microL for C18 stationary phase, when the solutes are no longer retained in stationary phase. Injection of large volumes of these hydrophobic solvents is thus possible in RP-LC with a gradual reduction of retention and peak efficiency. Two major conditions are however necessary in order to apply such an injection approach: the solutes must have a proper solubility in hydrophobic solvents and meanwhile they have to be less hydrophobic than the sample solvent in order to avoid competition with solvent molecules in partitioning between mobile and stationary phases.     

Influence of solvent effects on retention in reversed-phase liquid chromatography and solid-phase extraction using a cyanopropylsiloxane-bonded,silica-based sorbent

Summary The solvation parameter model is used to characterize the retention properties of a cyanopropylsiloxanebonded, silica-based sorbent with methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as mobile phases. The system constants over the composition range 1 to 50 % (v/v) organic solvent indicate that retention occurs because of the relative ease of cavity formation in the solvated stationary phase compared to the same process in the predominantly aqueous mobile phase as well as from more favorable stationary phase interactions with solutes containing π- and n-electrons. The capacity of the solute for dipole-type interactions is not important whereas all hydrogen-bond-type interactions result in reduced retention. Graphing the system constants as a function of mobile phase composition provides a simple mechanism for interpreting the change in capacity of the chromatographic system for retention in terms of changes in the relative weighting of fundamental intermolecular interactions. A comparison is also made with the retention properties of an octadecylsiloxane-bonded, silica-based sorbent with 30 % (v/v) methanol in water as the mobile phase and the extraction characteristics of a porous polymer sorbent with 1 % (v/v) methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as the sample processing solvent. Changes in sorbent selectivity due to selective uptake of the processing solvent are much smaller for the cyanopropylsiloxane-bonded sorbent than the results found for a porous polymer sorbent.     

反相液相色谱中溶剂强度规律的研究

 以溶质计量置换保留模型 (SDM R)为依据 ,通过研究 3种正链醇同系物溶剂置换剂对 14种正链醇同系物溶质色谱保留行为的影响 ,发现计量置换参数Z(对应 1mol溶质被吸附时从溶质与固定相接触处释放出的溶剂的总摩尔数 )、lgI(与 1mol溶质对固定相亲和势有关的常数 )和 j(与 1mol溶剂对固定相亲和势有关的常数 )均随着同系物置换剂相对分子质量的增大而减小 ,并呈现出线性变化 ,表明溶剂强度与溶剂分子的大小有关 ,分子愈大 ,溶剂洗脱能力愈强 ,并遵循同系物规律。     

Effect of Alkyl Chain Length of Bonded Silica Phases on Separation,Resolution and Efficiency in High Performance Liquid Chromatography

Abstract

A comparative study of alkyl bonded phases was carried out under optimum solvent conditions for each phase. Three columns, RP-2, RP-8 and RP-18, were tested for their efficiency and resolving power using three groups of compounds in three binary organic-water mobile phases. The organic solvents were acetonitrile, methanol and tetrahydrofuran which are widely used as solvent modifiers.

The results indicate that each of the three factors, i.e. solvent, solute and bonded alkyl chain length, play an important role, with the solvent being the most significant. When tetrahydrofuran-water was used as the mobile phase, the ratio of THF/H₂O did not vary by much when an RP-2, RP-8 or RP-18 column was used to separate naphthalene from biphenyl, dimethylphthalate from diethylphthalate or anthraquinone from methyl, anthraquinone and ethyl anthraquinone. When acetonitrile-water and methanol-water were used the ratio of organic modefier to water changed so as to accomodate the hydrophobic properties of the columns. The efficiency of the columns, expressed as theoretical plates per meter (TPM) was highest when acetonitrile-water was used as the mobile phase. Although there were variations in TPM and resolution from column to column, the three columns gave good separation of the components of the three groups of compounds.     

The influence of organic sample solvents on the separation efficiency of basic compounds under strong cation exchange mode

This study investigated the influence of organic sample solvents on separation efficiency of basic compounds under strong cation exchange (SCX) mode. The mixtures of acidic aqueous solution and organic solvent such as acetonitrile, ethanol, methanol and dimethyl sulfoxide (DMSO) were tested as sample solvents. For later-eluting analytes, the increase of sample solvent elution strength was responsible for the decrease of separation efficiency. Thus, sample solvents with weak elution strength could provide high separation efficiencies. For earlier-eluting analytes, the retention of organic sample solvents was the main factor affecting separation efficiency. Weakly retained solvents could provide high separation efficiency. In addition, an optimized approach was proposed to reduce the effect of organic sample solvent, in which low ionic solvent was employed as initial mobile phase in the gradient. At last, the analysis of impurities in hydrophobic drug berberine was performed. The results showed that using acidic aqueous methanol as sample solvents could provide high separation efficiency and good resolution (R > 1.5).     

Influence of solvent effects on retention in reversed-phase liquid chromatography and solid-phase extraction using a cyanopropylsiloxane-bonded,silica-based sorbent

Summary The solvation parameter model is used to characterize the retention properties of a cyanopropylsiloxane-bonded, silica-based sorbent with methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as mobile phases. The system constants over the composition range 1 to 50% (v/v) organic solvent indicate that retention occurs because of the relative ease of cavity formation in the solvated stationary phase compared to the same process in the predominantly aqueous mobile phase as well as from more favorable stationary phase interactions with solutes containing - and n-electrons. The capacity of the solute for dipole-type interactions is not important whereas all hydrogen-bond-type interactions result in reduced retention. Graphing the system constants as a function of mobile phase composition provides a simple mechanism for interpreting the change in capacity of the chromatographic system for retention in terms of changes in the relative weighting of fundamental intermolecular interactions. A comparison is also made with the retention properties of an octadecylsiloxane-bonded, silica-based sorbent with 30% (v/v) methanol in water as the mobile phase and the extraction characteristics of a porous polymer sorbent with 1% (v/v) methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as the sample processing solvent. Changes in sorbent selectivity due to selective uptake of the processing solvent are much smaller for the cyanopropylsiloxane-bonded sorbent than the results found for a porous polymer sorbent.     

Mobile phase effects in reversed-phase liquid chromatography: a comparison of acetonitrile/water and methanol/water solvents as studied by molecular simulation

Molecular simulations of water/acetonitrile and water/methanol mobile phases in contact with a C(18) stationary phase were carried out to examine the molecular-level effects of mobile phase composition on structure and retention in reversed-phase liquid chromatography. The simulations indicate that increases in the fraction of organic modifier increase the amount of solvent penetration into the stationary phase and that this intercalated solvent increases chain alignment. This effect is slightly more apparent for acetonitrile containing solvents. The retention mechanism of alkane solutes showed contributions from both partitioning and adsorption. Despite changes in chain structure and solvation, the molecular mechanism of retention for alkane solutes was not affected by solvent composition. The mechanism of retention for alcohol solutes was primarily adsorption at the interface between the mobile and stationary phase, but there were also contributions from interactions with surface silanols. The interaction between the solute and surface silanols become very important at high concentrations of acetonitrile.     

Influence of solvent effects on retention for a porous polymer sorbent in reversed phase liquid chromatography

Summary The influence of acetonitrile, methanol and isopropanol as retention selectivily modifiers in reversed phase liquid chromatography on a poly(styrene-divinylbenzene) macroporous polymer sorbent (PLRP-S) is evaluated using the solvation parameter model. Retention results from a combination of adsorption and partitioning and is influenced by the equilibrium absorption of organic solvent by the polymer from the mobile phase. The sorption of solutes is dominated by the ease of cavity formation in or on the solvated sorbent, with a small contribution from lone pair-lone pair electron interactions. All polar interactions, such as dipole-type and hydrogenbond formation, are more favorable in the mobile phase and reduce retention. Changes in the uptake of organic solvent from the mobile phase affect kinetic properties of the column such as band broadening and porosity as well as retention. The PLRP-S solvated sorbent is suitable for solid-phase extraction and is more retentive than typical silica-based, bonded phase sorbents for extraction from water. As a surrogate system for estimating solute lipophilicity and biological activity through retention-property correlations it provides a poor fit for hydrogen-bond acid solutes and is too dipolar/polarizable to fit some models.     

A New Equation for Solute Retention in Liquid Chromatography

In consideration of the adsorption of solvent, diluent and solute molecules on the surface of a stationaryphase, a new equation for solute retention in liquid chromatography is presented. This equation includesthree parameters: the displacement equilibrium constant (Ksd) between the solvent and diluent molecules onthe surface of the stationary phase, the total number(N) of the solvent and diluent molecules released fromthe stationary phase after one solute molecule being adsorbed, and the parameter (I) related to the thermody-namic equilibrium constant for the solute adsorption on the stationary phase. Over the whole concentrationrange of the solvent in the mobile phase, the experimental retention data can be well described by this equa-tion, parameters K~, N and I can be obtained by the regression analysis of the experimental retention data,and consequently the number of the solvent and the diluent molecules displaced by one solute molecule fromthe stationary phase can also be derived at different solvent concentrations in the mobile phase,     

The Effects of an Ionic Mobile Phase Modifier and Thermal History on a Reversed-Phase Liquid Chromatographic System

Abstract

The addition of millimolar quantities of potassium chloride to a totally aqueous mobile phase increased retention and reduced band broadening with an RP-8 column and polar solute as compared to pure water. This effect was minimized after cycling the solvent-conditioned column through a temperature gradient. These effects are explained by a dynamic surface model in which entrapped conditioning solvent as well as imbibed ionic species all play a part in structuring the interfacial region where retention occurs.     

梯度液相色谱保留时间公式在梯形梯度洗脱研究中的应用

根据前期得到的梯度液相色谱保留时间计算公式,在不指定溶剂强度模型形式的前提下,探讨了梯形梯度洗脱的一些特点。对于溶质在梯形梯度坡度上流出时的情形,推导得到溶质流出色谱柱所对应的流动相组成(φ_R)随梯度斜率(B)变化的表达式。该公式表明,在该情形中φ_R将会随着B值的增加而增加。对于溶质在梯形梯度最后一个等度区间流出时的情形,如果初始和终止流动相组成保持不变而仅有梯度的斜率发生变化时,从理论上证明了溶质保留时间(t_R)与梯度斜率的倒数(1/B)之间呈线性关系。实验中以C18色谱柱为固定相,甲醇-水为流动相,联苯为样品,测定了不同流动相组成以及梯形梯度条件下的保留时间,所得到的实验值与理论值吻合,从而验证了理论方法的正确性。     

醋酸水流动相体系中硅胶键合相上生物大分子保留行为的研究

 提出了以醋酸 水作为流动相的体系中 ,在ODS柱上分离生物大分子的反相高效液相色谱 (RPLC)方法。实验结果表明 ,醋酸 水的洗脱能力强于甲醇 水 三氟醋酸体系 ,在一定程度上克服了色谱分离中一些蛋白质的不可逆吸附且具有便于冷冻干燥的优点。用参数Z(1mol溶剂化溶质被溶剂化固定相吸附时从两者接触表面释放出置换剂的摩尔总数 ) ,logI(与 1mol溶质对固定相亲和势有关的常数 )和 j(与 1mol溶剂对固定相亲和势有关的常数 )对 9种蛋白质在此流动相体系中的保留进行了表征。     

The Effect of Binary Solvent Composition and Polarity on Separations in Reversed Phase Thin Layer and High Performance Liquid Chromatography

Abstract

The effect of the solvent's composition and polarity on separation in reversed phase thin layer and high performance liquid chromatography is discussed. These results show that retention times cannot be predicted merely from the polarity of the binary mobile phase. Although organic modifiers with the same physico-chemical properties and from the same solvent group were used, the retention times obtained using binary mobile phases having the same polarity, were different. It was also observed that normal chain carbon alcohols gave retention times different from those with a branched chain (n-propanol vs. iso-propanol), and the longer the alcohol chain the higher the R_f value. The results also show that not only the organic modifier used is important but the solute mixture used.     

Effect of temperature on competitive adsorption of the solute and the organic solvent in reversed-phase liquid chromatography

In analysis of the temperature effect on chromatographic separations the influence of the adsorption of organic solvent on the retention properties of solute is generally not taken into account. In fact, adsorption behavior of solutes is strongly affected by competitive adsorption of organic solvents, which is temperature dependent. In this work changes of adsorption equilibrium of an organic solvent as well as a solute with temperature have been analyzed. Data of the excess adsorption of methanol from aqueous solutions on octadecyl-bonded silica have been acquired at different temperature. Experiments have been performed over a relatively narrow temperature range corresponding to typical chromatographic conditions, i.e., 10-50 degrees C. The competitive adsorption equilibria of model solutes (i.e., two homologous compounds: cyclopentanone and cyclohexanone) have been measured at different temperature and composition of the mobile phase. Temperature alterations to the retention properties were found to result from combined effects of changes in adsorption behavior of the organic solvent and of the solute. The influence of temperature on the separation selectivity has been considered.     

Insights into the Retention Mechanism of Small Neutral Compounds on Octylsiloxane-Bonded and Diisobutyloctadecylsiloxane-Bonded Silica Stationary Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an octylsiloxane-bonded (Kinetex C8) and diisobutyloctadecylsiloxane-bonded (Kinetex XB-C18) superficially porous silica stationary phases for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not for methanol–water mobile phases. Compared with an octadecylsiloxane-bonded silica stationary phase (Kinetex C18) retention is reduced due to a less favorable phase ratio for both the octylsiloxane-bonded and diisobutyloctadecylsiloxane-bonded silica stationary phases while selectivity differences are small and solvent dependent. Selectivity differences for neutral compounds are larger for methanol–water but significantly suppressed for acetonitrile–water mobile phases. The selectivity differences arise from small changes in all system constants with solute size and hydrogen-bond basicity being the most important due to their dominant contribution to the retention mechanism. Exchanging the octadecylsiloxane-bonded silica column for either the octylsiloxane-bonded or diisobutyloctadecylsiloxane-bonded silica column affords little scope for extending the selectivity space and is restricted to fine tuning of separations, and in some cases, to obtain faster separations due to a more favorable phase ratio. For weak bases larger differences in relative retention are expected with acetonitrile–water mobile phases on account of the additional cation exchange interactions possible that are absent for the octadecylsiloxane-bonded silica stationary phase.     

Intramolecular Hydrogen Bonding Effects on the Reversed-Phase Retention of Substituted Acetophenones

Abstract

Reversed-phase 1 iquid chromatography (RPLC) is widely recognized as a valuable technique for the separation of compounds of varying 1 ipophil ic/hydrophobic nature. RPLC on hydrocarbon stationary phases has been used for the separation of homologues of various compound classes with outstanding success (1–3). Excellent correlations have been obtained between RPLC capacity factors and various parameters of the solvophobic theory (4–6). This theory suggests that solute-solvent interactions assume the primary role in the RPLC retention process (7–9). The creation of a suitable cavity in the mobile phase is a key factor affecting the retention of the solute. The size and shape of the cavity formed in the solvent depends on solute molecular volume and hydrophobic surface area as well as the dielective constant and surface tension of the solvent. Relationships between RPLC capacity factors, partition coefficients (10,ll) and biological activities (12) have been reported. These high correlations suggest RPLC can be a very useful tool for the study of molecular phenomena in solution.