Synthesis,characterization, speciation and biological studies on metal chelates of 1-benzoyl(1,2,4-triazol-3-yl)thiourea

Proton-ligand association constants of 1-benzoyl(1,2,4-triazol-3-yl)thiourea (BTTU) and its complex formation constants with some bivalent metal ions Ni(II), Co(II), Mn(II), Zn(II), and Cu(II), have been determined potentiometrically in 50% EtOH–H₂O and 0.1 M NaNO₃. The complexes formed in solution have a stoichiometry of 1:1 and 1:2 [M:L], where M represents the metal ion and L the BTTU ligand. The corresponding thermodynamic parameters are derived and discussed. The complexes are stabilized by enthalpy changes and the results suggest that complexation is an enthalpy-driven process. The effects of metal ion, ionic radius, electronegativity, and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3d transition metals follow the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺. The metal complexes were synthesized and characterized by elemental analyses, conductance, IR, ¹H NMR, and magnetic measurements. The low magnetic moment of 0.11 BM for the Cu(II) complex is suggestive of dimerization through Cu–Cu interaction. The concentration distribution diagrams of the complexes were evaluated. The ligands and their metal complexes have been screened in vitro against some bacteria and fungi.     

Formation and Stability of Binary Complexes of Divalent Ecotoxic Ions (Ni, Cu, Zn, Cd, Pb) with Biodegradable Aminopolycarboxylate Chelants (dl-2-(2-Carboxymethyl)Nitrilotriacetic Acid, GLDA, and 3-Hydroxy-2,2′-Iminodisuccinic Acid, HIDS) in Aqueous Solutions

The protonation and complex formation equilibria of two biodegradable aminopolycarboxylate chelants {dl-2-(2-carboxymethyl)nitrilotriacetic acid (GLDA) and 3-hydroxy-2,2??-iminodisuccinic acid (HIDS)} with Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ ions were investigated using the potentiometric method at a constant ionic strength of I?=?0.10?mol·dm^?3 (KCl) in aqueous solutions at 25?±?0.1?°C. The stability constants of the proton?Cchelant and metal?Cchelant species for each metal ion were determined, and the concentration distributions of various complex species in solution were evaluated for each ion. The stability constants (log₁₀ K _ML) of the complexes containing Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ ions followed the identical order of log₁₀ K _CuL?>?log₁₀ K _NiL?>?log₁₀ K _PbL?>?log₁₀ K _ZnL?>?log₁₀ K _CdL for either GLDA (13.03?>?12.74?>?11.60?>?11.52?>?10.31) or HIDS (12.63?>?11.30?>?10.21?>?9.76?>?7.58). In each case, the constants obtained for metal?CGLDA complexes were larger than the corresponding constants for metal?CHIDS complexes. The conditional stability constants (log₁₀ $ K_{\text{ML}}^{'} $ ) of the metal?Cchelant complexes containing GLDA and HIDS were calculated in terms of pH, and compared with the stability constants for EDTA and other biodegradable chelants.     

Luminescence Method for Studying the Formation and Stability of Macromolecular Complexes of Transition Metals with Carboxyl-Containing Polymers in Organic Solvents

Quenching of the luminescence of carboxyl-containing polymer molecules containing a luminescent marker by transition metal ions (Cu²⁺, Ni²⁺) is observed not only in aqueous and aqueous-salt solutions, but also in polar organic solvents (methanol, ethanol, dimethylformamide). In dilute solutions, quenching refl ects binding of metal ions with the polymer and changes in the degree of filling of the polymer carboxyl groups with transition metal ions quenching the luminescence. The equilibrium stability constant of the formed macromolecular metal complex in organic media can be quantitatively estimated from the quenching effect using the relationships that follow from the law of mass action. The formation and stability of Cu²⁺ and Ni²⁺ complexes with polymethacrylic acid in protic (methanol, ethanol) and aprotic (dimethylformamide) solvents at low polymer concentrations (0.4–0.02 mg mL^–1) were studied using the quenching effect. In methanol, in contrast to ethanol and dimethylformamide, two mechanisms of binding of transition metal ions with different equilibrium stability constants of the complexes (\({K_{{1^{st}}}}\) > 3 × 10⁹ and \({K_{{2^{st}}}}\) ≈ 10⁶–10⁴) were revealed. The infl uence exerted on the stability of the complexes and on the complexation mechanism by the nature and acidity of the organic solvent, polymer concentration, kind of the transition metal ion quenching the luminescence, and NaOH and HCl additions was studied. The results obtained demonstrate the efficiency of the luminescence method used and prospects for its further use for studying polymer systems containing transition metal ions in organic solvents.     

speciation of Cadmium(II) Using Donnan Dialysis and Differential-Pulse Anodic Stripping Voltammetry in a Flow-Injection System

Abstract

A flow-injection/Donnan dialysis/differential pulse anodic stripping voltammetry system was developed for the determination of free cadmium concentrations, [Cd²⁺], in solutions containing organically complexed Cd(II). A small dialysis cell with a strong cation-exchange membrane separating the sample and the receiver channels, was equilibrated in a flow-injection system. The ionic strength of sample and receiver solutions was 0.1 M, with NaNO₃ as the bulk electrolyte. By determining a constant fraction of the Cd²⁺ associated with the membrane phase, [Cd²⁺] of the samples could be measured.

Experimentally determined [Cd²⁺] corresponded well with those calculated, using tabulated stability constants, when citric acid, nitrilotriacetic acid, and oxalic acid were added as ligands. Thus, negatively charged and uncharged complexes were excluded from the membrane. Using the experimental design presented, [Cd²⁺]>5 × 10^×8 M could be determined, but there is a great potential for increasing the sensitivity of the method.

In solutions containing 1.0 μM Cd(II) and 200 mg fulvic acid/l, the inorganic fraction (Cd²⁺ CdNO₃ ⁺ decreased from 57% to 10% when the pH increased from 4.04 to 5.51. In a soil solution from an orthic podzol, having a high concentration of dissolved organic carbon (22.4 mM), the inorganic fraction constituted 53% of the total Cd(II) concentration.     

Precise polarographic determination of the stability constants of cadmium and lead with oxalate and sulphate

Precise polarographic determinations of the stability constants of some complexes of lead and cadmium with oxalate and sulphate were made using differential-pulse polarography, normal- pulse polarography and direct-current polarography at three different concentrations of the metal ions in the range 1 × 10^?4 to 9 × 10^?8 M. The stability constants, evaluated with the DeFord-Hume procedure, at the different metal ion concentrations and using the different techniques are in good agreement with each other and with literature values. In the calculations corrections were made for changes in liquid-junction potentials and the effect of alterations in the diffusion coefficient of the reactant was also considered for diffusion towards a spherical electrode. For metal ion concentrations above approximately 10^?6 M the precision of the determinations of the half-wave potentials and of the calculations of the stability constants approaches that commonly obtained in potentiometric measurements on similar systems.     

Copper(II) ion-sensing mechanism of oligo-phenylene vinylene derivatives: syntheses and theoretical calculations

Oligo-phenylene vinylene (oligo-PV) with two picolinamide side-groups and six methoxy end-groups was synthesized in order to be a fluorescent sensing molecule. Various metal ion solutions (1.5×10^?4 M) were added to the 1.5×10^?6 M acetonitrile solution of the fluorescent molecule. The fluorescent emission spectra showed that, at about the same concentration (1.5×10^?4 M), only Cu(II) ion can quench the fluorescent emission of the picolinamide-PV solution. Possible metal ion-sensing mechanisms could be either the binding at picolinamide side-groups or methoxy end-groups, or interchain-stacking driven by the metal ions. Hence, oligo-PVs with six methoxy end-groups but without substituted side-groups, and another oligo-PV with six methoxy end-groups and two ethoxy side-groups were synthesized for comparison. These molecules turned out to be inactive to any metal ion solutions. Moreover, quantum calculation was used to confirm the result. Binding energy and conformation were calculated and simulated. It could be concluded that nitrogen and oxygen atoms of the picolinamide group and one oxygen atom from the methoxy group are involved in the metal ion-binding process.     

An NMR study of cyclodextrin complexes of the steroidal neuromuscular blocker drug Rocuronium Bromide

The interaction of Rocuronium Bromide, and a model steroid Org 7402, with three cyclodextrins (β‐cyclodextrin, γ‐cyclodextrin and Org 25969) was studied by solution state NMR experiments. Stoichiometries and binding constants were determined from ¹H chemical shift titrations. All of the systems formed 1 : 1 complexes. Most of the complexes were in fast exchange with unbound species on the NMR time scale, but the most tightly bound complex (Rocuronium Bromide–Org 25969) was in the slow exchange regime. The geometry of the complexes was inferred from ¹H and ¹³C NMR shift changes upon complexation and from intramolecular NOE correlations. Rocuronium Bromide forms a weak complex with β‐cyclodextrin (K_a = 3.3 ± 0.5 × 10³ M ^?1) and no clear picture of the structure of the complex emerges. The complexes with γ‐cyclodextrin (K_a = 1.8 ± 0.2 × 10⁴ M ^?1) and Org 25969 (K_a > 10⁵ M ^?1) are true inclusion complexes with the steroid located inside the central void of the cyclodextrin. Copyright © 2002 John Wiley & Sons, Ltd.     

Electrochemical properties and spectrophotometry of membranes based on holmium tetraphenylporphyrinchloride

Protolytic properties of holmium tetraphenylporphyrinchloride were studied by the method of two-phase spectrophotometric titration with potentiometric monitoring of pH of the medium. Apparent constants of the heterophase reaction of the exchange of an anion for the hydroxide ion were determined. It was found that the membranes based on holmium tetraphenylporphyrinchloride with dibutyl phthalate as a solvent-softener are selective to ions of alkaline earth metals (Ca²⁺ and Ba²⁺) in the region of pH > 7 over the concentration range from 1 up to 1×10⁻⁴ M. Selectivity coefficients were determined by two independent methods: the method of biion potentials and the method of mixed solutions. The found selectivity series coincides with traditional Hofmeister series for cations.     

Application of a Zeolite-Poly(vinyl chloride) Electrode to Potentiometric Studies of Alkali Metal Ions

Potentiometric electrodes based on the incorporation of zeolite particles into poly(vinyl chloride) (PVC) membranes are described. The electrode characteristics are evaluated regarding the response towards alkali ions. PVC membranes plasticized with dibutyl phthalate and without lipophilic additives (co-exchanger) are used throughout this study. The electrode exhibits a Nernstian response over the alkali metal cation concentration range of 1.0 × 10^?4 to 1.0 × 10^?1 M with a slope of 57.0 ± 0.9 mV per decade of concentration with a working pH range 3.0–9.0 and a fast response time of ≤15 s. The selectivity coefficients for cesium ion as test species with respect to alkaline earth, ammonium, and some heavy metal ions are determined. The proposed zeolite-PVC electrode is applied to the determination of ionic surfactant.     

Preparation of a solid-state ion-selective electrode based on polypyrrole conducting polymer for magnesium ion

In this study, a potentiometric sensor based on a pencil graphite electrode (PGE) coated with polypyrrole doped with Titan yellow dye (PPy/TY) was prepared for potentiometric determination of magnesium ion in aqueous solutions. The structural characteristics of magnesium sensor electrode (PGE/PPy/TYMg) were studied using scanning electron microscopy and Fourier transform infrared along with energy-dispersive spectroscopy. Under the optimal conditions, the electrode reveals a good Nernstian behavior with slope of 28.27 ± 0.40 mV per decade over the concentration range of 1.0 × 10^?5–5.0 × 10^?2 M and a detection limit of 6.28 × 10^?6 M. The potentiometric response of fabricated electrode toward magnesium ion was found to be independent of the pH of the test solution in the pH range of 4.5–8.0. The electrode showed fast response time (<10 s) and good shelf lifetime (>2 months). The prepared magnesium sensor electrode can also be used as an indicator electrode in potentiometric titration of Mg²⁺ with EDTA with distinguished end point. The electrode revealed good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The introduced magnesium electrode was used for measurement of Mg²⁺ ion in real samples without any serious interferences from other ions.     

Determination of the ammonium ion by voltammetry at the liquid-liquid interface using calixarenes as neutral carriers

The transfer of alkali and alkaline earth metal ions and ammonium ions facilitated by the calixarenes 5,11,17,23-tetra(tert-butyl)-26,28-dihydroxycalix[4]-25,27-crown-5-ether, 5,11,17,23-tetra(tert-butyl)-26,28-di(ethoxycarbonylmethoxy)calix[4]-25,27-crown-5-ether, and 5,11,17,23-tetra(tert-butyl)-25,26,27,28-tetra(ethoxycarbonylmethoxy)-calix[4]arene was studied by voltammetry at the interface between two immiscible electrolyte solutions. The formal energies, transfer potentials, stoichiometry, and stability constants of the complexes were determined. The optimum conditions for determining the ammonium ion by voltammetry at the liquid-liquid interface were selected on the basis of these studies (the detection limit was 3.5 × 10^?6 M). The ammonium ion determination showed selectivity relative to the sodium ion.     

Complex formation equilibria between aluminum(III), gadolinium(III) and yttrium(III) ions and some fluoroquinolone ligands. Potentiometric and spectroscopic study

Complex formation equilibria of aluminum(III), gadolinium(III), and yttrium(III) ions with the fluoroquinolone antibacterials moxifloxacin, ofloxacin, fleroxacin, lomefloxacin, levofloxacin, and ciprofloxacin were studied in aqueous solution by potentiometric and spectroscopic methods. The identity and stability of metal–fluoroquinolone complexes were determined by analyzing potentiometric titration curves (310 K, μ = 0.15 M NaCl, pH range = 2–11, C_L/C_M = 1?:?1 to 3?:?1, C_M = 1.0 mM) with the aid of Hyperquad2006 program. The main species formed in the system may be formulated as M_pH_qL_r (p = 1, q = ?2 to 2, r = 1–3, L = fluoroquinolone anion, logarithm of overall stability constant, log β_p,q,r = in the range ca. ?10 to 45). The stability of complexes is mostly influenced by metal ion properties (ionization potential, ionic radius) indicating partial ionic character of the coordination bond. The complexes were also characterized by spectroscopic measurements: spectrofluorimetry, ¹H-NMR, and ESI-MS. Fluorimetric data were evaluated with the aid of HypSpec2014 and indicated the formation of ML_r (r = 1–3) complexes with cumulative conditional stability constants significantly lower than the thermodynamic ones. NMR and MS data corroborate potentiometrically determined speciation. Calculated plasma mobilizing capacity of the ligands generally follows the order levofloxacin > moxifloxacin > ciprofloxacin at concentration levels of the ligands higher or equal to ca. 10^?4 M.     

Protonation Equilibria of Carminic Acid and Stability Constants of Its Complexes with Some Divalent Metal Ions in Aqueous Solution

The dissociation constants of carminic acid (7-D-glucopyronosyl-3,5,6,8-tetra- hydroxy-1-methyl-9,10-dioxo-anthracene-2-carboxylic acid) (CA), together with the stability constants of its Cu(II), Zn(II), Ni(II), Co(II) and Hg(II) complexes, were studied potentiometrically in aqueous medium at 25.0?(1)?°C, and at the ionic background of 0.1?mol?dm^?3 of NaCl, and determined with the SUPERQUAD computer program. It has been observed that carminic acid has five dissociation constants, and for H₅L their values are 3.39?(7), 5.78?(7), 8.35?(7), 10.27?(7), and 11.51?(7). This ligand behaves as a bi-dentate ligand, and the carboxyl and the ortho hydroxy groups of the ligand coordinate to the metal ions. Various metal complexes were produced in solution under the experimental conditions, for each metal ion used, including hydrolyzed species. The species distribution curves of the complexes formed in the solution were calculated and reviewed. The stability of the complexes was found to follow the order: Cu(II) > Zn(II) > Ni(II) > Co(II) > Hg(II).     

Synthesis of nucleobase-calix[4]arenes via click chemistry and evaluation of their complexation with alkali metal ions and molecular assembly

In this study, calix[4]arene derivatives (11–14) bearing a single nucleobase (adenine, thymine, cytosine or guanine) were synthesised via click chemistry. The complexation ability of the synthesised derivatives with alkali metal ions was measured using MALDI-TOF mass spectrometry, and their molecular assembly in CDCl₃ was determined using ¹H NMR. Calix[4]arene derivatives (11–14) formed 1:1 complexes with all alkali metal ions and the rank order for the complexation selectivity was Rb⁺ > Cs⁺ > K⁺ ? Na⁺ > Li⁺. The attachment of nucleobase at the upper rim of calix[4]arene had little effect on its complexation selectivity for alkali metal ions. Thymine-, adenine- and guanine-calix[4]arenes formed self-assembled structures in CDCl₃ via base–base interactions. In addition, adenine-calix[4]arene (11) bound to thymine-calix[4]arene (12) to form a discrete species via Hoogsteen hydrogen bonding.     

The effect of ligand donor atoms on ternary complex stability

Formation constants of mixed ligand complexes of Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, and Mn²⁺,with cyadine-5′-monophosphoric acid (CMP) and various primary ligands such as 1,10-phenanthroline(phen), glycylglycine(glygly) and salicylic acid (sal) have been determined in aqueous solution at 35°C and 0.1 M (KNO₃) by potentiomeric measurements. The acid dissociation constants of all the above mentioned ligands together with their 1 : 1 binary metal complex formation constants were also measured at 35°C. In general all the 1 : 1 binary complexes follow the Irving-Williams order of stability. Further the binary metal complexes of primary ligands are more stable than their ternary complexes with CMP. For ternary complexes, Δ(log K) values seem to change from positive to highly negative as the coordinating atoms of the primary ligands were varied from N,N to N,O^? to O^?O^?. The higher stability of ternary complexes involving phen is due to its Π-bonding interaction with the above metal ions and the relative decrease in the stability of other ternary systems is due to the coulombic repulsion of donor oxygen atoms of primary and secondary ligands. Thus for ternary complexes the stabilities follow a decreasing order of M-phen-CMP > M-glygly-CMP > M-sal-CMP.     

Conductometric studies of thermodynamics of complexation of Li+, Na+ and K+ ions with 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 in binary acetonitrile–nitromethane mixtures

The complexation reactions between 4′,4″(5″)-di-tert-butyldibenzo-18-crown-6 (DTBDB18C6) and Li⁺, Na⁺ and K⁺ ions were studied conductometrically in different acetonitrile–nitromethane mixtures at various temperatures. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance-mole ratio data at different temperatures. At 20 °C and in nitromethane solvent, the stability of the resulting complexes varied in the order K⁺ > Na⁺ > Li⁺. The enthalpy and entropy changes of the complexation reactions were evaluated from the temperature dependence of formation constants. It was found that the stability of the resulting complexes increased with increasing nitromethane in the solvent mixture. The TΔS° versus ΔH° plot of thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reactions. The ab initio studies calculated at B3LYP/6-31G level of theory, indicate the binding energy of complexes decreases with increasing cation size in the gas phase. In the solution phase, DTBDB18C6 preferentially forms complexes with the larger ions rather than the smaller ions because the solvation energies of the smaller ions are large enough to overcome and reverse the trends in gas phase complexation. The findings of this study suggest that the current understanding of the factors influencing the selectivity of metal ion complexation by crown ethers may be in need of revision.     

Kinetics and equilibrium study of nickel(II) complexation by pterin

The kinetics of complexation of Ni(II) by pterin was studied in aqueous solutions with a stopped‐flow apparatus under conditions of pseudo‐first order in the temperature range 5–45°C, pH between 4.0 and 6.5, and ionic strength 0.4 M. The equilibrium constants, stoichiometry, and pK_a of the ligand and complex were also determined using a spectrophotometric technique. The results are consistent with the formation of a 1:1 complex between the metal ion and pterin. The first‐order experimental rate constant k_app is pH independent and shows the following dependence with the ion metal concentration at 25°C: k_app/s⁻¹ = 3.8 × 10⁻³ + 1.6 × 10⁻⁴ × [Ni(II)]⁻¹. A global activation energy of 57 ± 2 kJ/mol associated with the formation of a 1:1 chelate was measured. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 231–237, 2000     

Determination of cerium(III) ions in soil and sediment samples by Ce(III) PVC-based membrane electrode based on 2,5-dioxo-4-imidazolidinyl

2,5-Dioxo-4-imidazolidinyl was used as an excellent sensing material in the preparation of a PVC membrane for a Ce(III)-selective sensor. The electrode shows a good selectivity for the Ce(III) ion with respect to most common cations including alkali, alkaline earth, transition, and heavy metal ions. The developed sensor exhibits a wide linear response with a slope of 19.6?±?0.3 mV per decade over the concentration range of 1.0?×?10^?6 to 1.0?×?10^?1 M, while the illustrated detection limit is 5.7?×?10^?7 M of Ce(III) ions. Moreover, it is concluded that the sensor response is pH-independent in the range of 3.1–9.8. The applications of the recommended electrode include the determination of concentration of Ce(III) ions in soil and sediment samples, validation with CRM's, and the Ce(III) ion potentiometric titration with EDTA as an indicator electrode.     

Construction and characterization of nano iron complex ionophore for electrochemical determination of Fe(III) in pure and various real water samples

Electrochemical methods represent an important class of widely used techniques for the detection of metal ions. The unique chemical and physical properties of nanoparticles make them extremely suitable for designing new and improved sensing devices, especially electrochemical sensors and biosensors. This study focused on the synthesis of a nano‐Fe(III)–Sud complex and its characterization using various spectroscopic and analytical tools, optimized using the density functional theory method, screened for antibacterial activity and evaluated for possible binding to DNA using molecular docking study. Proceeding from the collected information, nano‐Fe(III)–Sud was used further for constructing carbon paste and screen‐printed ion‐selective electrodes. The proposed sensors were successfully applied for the determination of Fe(III) ions in various real and environmental water samples. Some texture analyses of the electrode surface were conducted using atomic force microscopy. At optimum values of various conditions, the proposed electrodes responded towards Fe(III) ions linearly in the range 2.5 × 10^?9–1 × 10^?2 and 1.0 × 10^?8–1 × 10^?2 M with slope of 19.73 ± 0.82 and 18.57 ± 0.32 mV decade^?1 of Fe(III) ion concentration and detection limit of 2.5 × 10^?9 and 1.0 × 10^?8 M for Fe(III)–Sud‐SPE (electrode I) and Fe(III)–Sud‐CPE (electrode II), respectively. The electrode response is independent of pH in the range 2.0–7.0 and 2.5–7.0, with a fast response time (4 and 7 s) at 25°C for electrode I and electrode II, respectively. Moreover, the electrodes also showed high selectivity and long lifetime (more than 6 and 3 months for electrode I and electrode II, respectively). The electrodes showed good selectivity for Fe(III) ions among a wide variety of metal ions. The results obtained compared well with those obtained using atomic absorption spectrometry.