A high‐performance liquid chromatography assay with a triazole‐bonded column for evaluation of d‐amino acid oxidase activity

Elution profiles of kynurenic acid (KYNA) and 7‐chlorokynurenic acid (Cl‐KYNA) were examined by high‐performance liquid chromatography (HPLC) using a triazole‐bonded stationary phase column (Cosmosil® HILIC) under isocratic elution of a mobile phase consisting of CH₃CN–aqueous 10 mm ammonium formate between pH 3.0 and 6.0. The capacity factors of KYNA and Cl‐KYNA varied with both the CH₃CN content and the pH of the mobile phase. The elution order of KYNA and Cl‐KYNA was reversed between the CH₃CN‐ and H₂O‐rich mobile phases, suggesting that hydrophilic interactions and anion‐exchange interactions caused retention of KYNA and Cl‐KYNA in the CH₃CN‐ and H₂O‐rich mobile phases, respectively. The present HPLC method using a triazole‐bonded column and fluorescence detection (excitation 250 nm, emission 398 nm) was applied to monitor in vitro production of KYNA from d ‐kynurenine (d ‐KYN) by d ‐amino acid oxidase (DAO) using Cl‐KYNA as an internal standard. A single KYNA peak was clearly observed after enzymatic reaction of d ‐KYN with DAO. Production of KYNA from d ‐KYN was suppressed by the addition of commercial DAO inhibitors. The present HPLC method can be used to evaluate DAO activity and DAO inhibitory effects in candidate drugs for the treatment of schizophrenia. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of mixed aqueous‐organic solvents on the rate of intramolecular carboxylic group‐catalyzed cleavage of N‐(4′‐methoxyphenyl)phthalamic acid

Kinetic study on the cleavage of N‐(4′‐methoxyphenyl)phthalamic acid (NMPPAH) in mixed H₂O‐CH₃CN and H₂O‐1,4‐dioxan solvents containing 0.05 M HCl reveals the formation of phthalic anhydride (PAn)/phthalic acid (PA) as the sole or major product. Pseudo first‐order rate constants (k₁) for the conversion of NMPPAH to PAn decrease nonlinearly from 60.4 × 10^?5 to 2.64 × 10^?5 s^?1 with the increase in the contents of 1,4‐dioxan from 10 to 80% v/v in mixed aqueous solvents. The rate of cleavage of NMPPAH in mixed H₂O‐CH₃CN solvents at ≥50% v/v CH₃CN follows an irreversible consecutive reaction path: NMPPAH PA. The values of k₁ are larger in H₂O‐CH₃CN than in H₂O‐1,4‐dioxan solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 316–325, 2004     

Retention studies of 2′-2′-difluorodeoxycytidine and 2′-2′-difluorodeoxyuridine nucleosides and nucleotides on porous graphitic carbon: Development of a liquid chromatography–tandem mass spectrometry method

The development of a method for the separation of 2′-2′-difluorodeoxycytidine (gemcitabine, dFdC), 2′-2′-difluorodeoxyuridine (dFdU) and their mono-, di- and triphosphates using a porous graphitic carbon column (Hypercarb), without ion-pairing agent, is described. The retention of dFdC and dFdU could be controlled with an organic modifier (acetonitrile, CH₃CN) and the retention of the anionic nucleotides with an eluting ion (bicarbonate). Separation of all analytes was achieved using a 0–25 mM ammonium bicarbonate gradient in CH₃CN–H₂O (15:85, v/v). Under these conditions, however, very long re-equilibration times were required. Injection of an acidic solution (100 μL 10% formic acid in H₂O, v/v; 2.65 M) after running a gradient directly restored the separation capabilities of the column. Still, separation between the analytes slowly deteriorated over a period of months. These problems were solved by preconditioning the column with a pH buffered hydrogen peroxide (H₂O₂) solution (0.05% H₂O₂ in CH₃CN–H₂O (15:85, v/v), pH 4) before starting an analytical run. The oxidation of the stationary phase with H₂O₂ prevented its slow reduction, which most likely caused the decreasing retention times. The analytes were detected using tandem mass spectrometry.     

Quantitative Analysis of Amoxicillin, Clavulanic Acid, and Ticarcillin in Multi-Wells by Liquid Chromatography/Electrospray Ionization Mass Spectrometry as a Strategy for Quality Control

Liquid chromatography combined with electrospray ionization tandem mass spectrometry in both positive and negative ion modes was used to separate and detect amoxicillin, clavulanic acid, and ticarcillin in three matrices: H₂O, Cation Adjusted Muller Hinton Broth (CAMHB), and 5% Lysed Horse Blood (LHB) in CAMHB. Direct precipitation of protein with acetonitrile (CH₃CN) was used for sample clean up. Chromatographic separation was accomplished using an octadecyl silica (C₁₈) bonded phase column. The mobile phase was 1% aqueous formic acid and 1% formic acid in CH₃CN using a gradient elution program. Ampicillin was used as an internal standard. The mass spectrometer showed excellent linearity in the calibration of all drugs. Amoxicillin and clavulanic acid in a range of 10–15 ng mL^?1 were easily quantified. The method was used successfully to quantify these drugs in a series of multi-well panels.     

A Highly Sensitive Method to Identify the D,L-Configurations of Monosaccharides Based on (-)-TBMB Carboxylic Acid and HPLC

Abstract

D, L-Isomers of monosaccharides were coupled with a fluorescent chiral derivatizing agent, (-)-2-tert-butyl-2-methyl-1,3-benzodioxole-4-carboxylic acid [(-)-TBMB carboxylic acid], to afford a pair of diastereoisomers. The two were well separated with HPLC (reverse phase conditions; ODS, CH₃CN:H₂O:isoPrOH) within 60 min and could be detected by fluorescence of the TBMB group at the few picomolar level.     

Dipodal fluorescent chemosensor for Cu and resultant complex as a chemosensor for iodide

A dipodal receptor was synthesized by condensation of isophthalaldehyde and p-toluenesulfonylhydrazide. The receptor was found to be selective for Cu²⁺ recognition in CH₃CN. The resultant Cu²⁺ receptor complex selectively recognized iodide through cation displacement assay in a CH₃CN/H₂O (8:2, v/v) solvent system.     

Efficient electrochemiluminescent cyclometalated iridium(III) complexes: Synthesis,photophysical and electrochemiluminescent properties

A series of new cyclometalated iridium(III) complexes for electrochemiluminescence (ECL) system were synthesized and fully characterized. Using tri-n-propylamine (TPA) as an oxidative–reductive co-reactant, their ECL properties were studied in acetonitrile (CH₃CN) and mixed CH₃CN/H₂O (50:50, v/v) solutions, respectively. Meanwhile, the influencing factors of ECL efficiencies, including working electrode, pH, and surfactant were investigated. A remarkable ECL enhancement (up to about 13.5 times), in comparison with the commonly used Ru(bpy)₃²⁺ (2,2′-bipyridyl) ruthenium(II), is observed from Ir(FPP)₂(acac) (where FPP is 2-(4-fluorophenyl)-4-phenylpyridine, acac = acetylacetone) at Pt disk electrode. At the same time, an increase in ECL efficiency is also observed in surfactant media. This study provided a new method for further improving and tuning the ECL efficiency by designing new iridium complexes with the appropriate cyclometalated or ancillary ligands.     

Ratiometry of monomer/excimer emissions of dipyrenyl calix[4]arene in aqueous media

Variations in the ratio of monomer/excimer emissions from pyrenyl groups bound to a calix[4]arene through facing carboxamidomethyl substituents have been investigated in H₂O/CH₃CN mixtures. Above a level of 50% H₂O, monomer emission declines and the excimer emission concomitantly increases. DFT calculations support the argument that disruption of intramolecular NHO bonds by water results in a geometry, which favors contact of the pyrene units and thus a strong excimer emission. Addition of Fe(III) to a H₂O/CH₃CN (4:1, v/v) solution of 1 at pH 6.1 quenches both monomer and excimer emissions through electron transfer (eT) from excited pyrene to the metal ion.     

Effects of mixed CH3CN(SINGLEBOND)H2O solvents on rate of intramolecular general base-catalyzed cleavage of ionized phenyl salicylate in the presence of 3-aminopropan-1-ol, 1,2-diaminoethane,and glycine

The effects of mixed CH₃CN(SINGLEBOND)H₂O solvents on rates of aminolysis of ionized phenyl salicylate, PS⁻, reveal a nonlinear decrease in the nucleophilic second-order rate constants, k_n^ms, (for aminolysis) with increase in the content of CH₃CN until it becomes ∼50%, v/v. The values of k_n^ms remain almost unchanged with change in the CH₃CN content within 50 to 70 or 80%, v/v. The effects of mixed CH₃CN(SINGLEBOND)H₂O solvents on pK_a of leaving group, phenol, and protonated amine nucleophile have been concluded to be the major source for the observed mixed solvent effects on k_n^ms. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 301–307, 1998.     

Determination of phenols by HPLC down to PPT levels

Summary A mixture of eleven priority pollutant phenols (PPP) have been separated using a Dionex 4000 chromatograph; VAL-U-PAK ODS (250 × 4.6 mm I.D.) column; eluents A: CH₃CN/0.2M NaH₂PO₄/CH₃COOH 40/60/1 and B: CH₃CN with/without gradient; detectors: UV-254 nm and Pulse Amperometric Detector (PAD) with glassycarbon electrode (+1.20V). With preconcentration unit (guard RP-18 column) on line and PAD, detectability limit at ten ppt was achieved. The method has been applied for determination of PPP in tap-water and in leachates from sanitary and industrial landfill sites.     

[FeFe] Hydrogenase: 2-Propanethiolato-Bridged {FeFe} Systems as Electrocatalysts for Hydrogen Production in Acetonitrile-Water

Diiron bis(monothiolato)-bridged hydrogenase mimics [Fe₂(μ-SⁱPr)₂(CO)₆] A (ⁱPr=isopropyl) and their phosphine derivatives [Fe₂(μ-SⁱPr)₂(CO)₅( L_1/2 )] and [Fe₂(μ-SⁱPr)₂(CO)₄( L₃ )] {tricyclohexylphosphine ( L₁ , PCy₃) 1 , triphenylphosphine ( L₂ , PPh₃) 2 and cis-1,2-bis(diphenylphosphino)ethylene ( L₃ , dppv) 3 } have been synthesized and investigated for electrocatalytic proton reduction activity in CH₃CN−H₂O. Based on the FTIR data (red-shift), the electron-donating ability of the phosphines followed the order: dppv>PCy₃>PPh₃ (average shift value with respect to complex A was 61 ( 1 ), 51 ( 2 ) and 80 ( 3 ) cm⁻¹). From CV measurements, it was seen that the catalytic reduction potential (acetic acid as proton source) shifted considerably towards positive potentials (anodic shift) on changing the solvent from pure CH₃CN to CH₃CN−H₂O (4 : 1 v/v). An increase in the percentage of water in CH₃CN led to the decomposition of complexes 1 and 3 . Though complexes A and 2 were stable in CH₃CN−H₂O (3 : 2 v/v), no improvement in electrocatalytic currents was observed.     

Quantification of 2,4-dinitrophenyl-hydrazones of low molecular mass aldehydes and ketones using HPLC

Summary This study was undertaken to evaluate the HPLC separation and quantification of several low molecular mass aldehydes and ketones, which may be produced during combustion in alcohol-fueled automobiles, by means of their dinitrophenylhydrazone derivatives. Stationary phases (ODS), mobile phase components (acetonitrile or methanol with water) and detection sensitivity at 254 and 365 nm were evaluated. Separation of eight dinitrophenylhydrazones could be achieved in approximately 20 minutes using a Zorbax ODS or a Supelcosil LC-PAH column with a MeOH:H₂O (7525 v/v) mobile phase. Complete separations were not obtained with either a Nova-Pack C-18 or an Ultrasphere ODS column. The use of acetonitrile-water mobile phases produces poorer resolution at all compositions tested. Quantification of the compounds by several methods was compared, with the lowest standard deviations being seen with the external than 1.5 pmol for each of the 2,4-dinitrophenylhydrazones in the test solution. The method is being applied to the analysis of aldehydes and ketones in the exhaust of automobile engines fueled by ethanolgasoline mixtures.Presented at the 19th ISC. Aix-en-Provence, France, September 13–18, 1992.     

Stereocontrolled Iodolactonization of Acyclic Olefinic Amides

Acyclic olefinic amides were iodolactonized in the mixed solvent of CH₃CN and H₂O (90:10₂ v/v) under reflux to give products with trans configuration of the newly formed iodomethyl to the inherent alkyl group in high yield.     

Formation of Cu<Superscript>I</Superscript>(CH<Subscript>3</Subscript>CN)<Subscript>4</Subscript>ClO<Subscript>4</Subscript> in the reactions of copper(II) perchlorate with acetonitrile in the presence of sulfur-containing organic compounds

Cu(ClO₄)₂·6H₂O was shown to react with 2,2′-[propane-1,3-diylbis(thio-2-phenylnemethylidene]-bis(3-pyridylamine) (I) or (5Z)-2-ethoxycarbonylmethyl-(2-pyridylmethylidene)-3,5-dihydro-4H-imidazol-4-one (II) in the presence of CH₃CN with the reduction of copper(II) to copper(I) and the formation of the tetrahedral complex Cu^I(CH₃CN)₄ClO₄ (III). In the course of the reaction the organic ligands I and II were oxidized to the corresponding sulfoxides.     

Optimization of chromatography to overcome matrix effect for reliable estimation of four small molecular drugs from biological fluids using LC–MS/MS

The article describes a systematic study to overcome the matrix effect during chromatographic analysis of gemfibrozil, rivastigmine, telmisartan and tacrolimus from biological fluids using LC–ESI–MS/MS. All four methods were thoroughly developed by the appropriate choice of analytical column, elution mode and pH of mobile phase for improved chromatography and overall method performance. Matrix effect was assessed by post-column analyte infusion, slope of calibration line approach and post-extraction spiking. The best chromatographic conditions established were: Acquity BEH C₁₈ (50 × 2.1 mm, 1.7 μm) column with 5.0 mm ammonium acetate, pH 6.0–methanol as the mobile phase under gradient program for gemfibrozil; Luna CN (50 × 2.0 mm, 3 μm) column with a mobile phase consisting of acetonitrile–10 mm ammonium acetate, pH 7.0 (90:10, v/v) for rivastigmine; Inertsustain C₁₈ (100 × 2.0 mm, 5 μm) column using methanol–2.0 mm ammonium formate, pH 5.5 (80: 20, v/v) as the mobile phase for isocratic elution of telmisartan; and Acquity BEH C₁₈ (50 × 2.1 mm, 1.7 μm) with methanol–10 mm ammonium acetate, pH 6.0 (95:5, v/v) as mobile phase for tacrolimus. The methods were thoroughly validated as per European Medicines Agency and US Food and Drug Administration guidance and were successfully applied for pharmacokinetic studies in healthy subjects.     

High-performance liquid chromatographic separation of polyolefin antioxidants and light-stabilisers

Summary A scheme was devised for the identification of 22 common antioxidants and light-stabilisers in polyolefins. The separation of these stabilisers was performed by isocratic reversed phase high-performance liquid chromatography on a RP-18 column. Three different separation conditions have been used: the mobile phase composition was 100% acetonitrile (MeCN), 90/10 meCN/H₂O and 80/20 MeCN/H₂O. The UV₂₅₄/UV₂₈₀ ratio and the elution time of each stabiliser were determined for these three mobile phase compositions. The values of UV₂₅₄/UV₂₈₀ ratios may be used together with the retention time values for the identification of unknown stabilisers in polyolefin samples.     

Speciation of phenyltin(IV) compounds using high‐performance liquid chromatography. Part 2: The direct analysis of mixed standard solutions of triphenyltin halides/pseudohalide and of triphenyltin carboxylates containing functional group variations in the esteryl moiety

Simultaneous speciation of mixed standard solutions of triphenyltin halides (triphenyltin chloride, bromide, iodide) and pseudohalide (triphenyltin isothiocyanate) has been achieved with reversed‐phase high‐performance liquid chromatography on a Waters Spherisorb S5W ODS‐2 (octadecyl‐silica) column. An isocratic mixture of 95:5 (v/v) acetonitrile:water was used as the mobile phase at a flow rate of 1 ml min^?1. A series of selected triphenyltin carboxylates, Ph₃SnOCOZ, where Z = Me, Ph, CH:CHPh, CH:NOMe, CH₂SC₅H₄N and CH₂SC(S)NMe₂, was also similarly analysed using this system with two separate isocratic elutions using 100% acetonitrile and 96:4 (v/v) acetonitrile:water as the mobile phase. UV detection was done at 254 nm and the total run time for each analysis was less than 3 min. The detection limits for all the phenyltin(IV) compounds were in the range 0.01–0.03 ppm. Spiked water samples containing the triphenyltin carboxylates could also be simultaneously analysed by the above method without the need for any prior derivatization, following extraction with hexane. Pretreatment of the aqueous sample with NaCl/HCl and of the organic phase with hexamethylphosphoramide enabled recoveries of about 80% of the triphenyltins. Copyright © 2002 John Wiley & Sons, Ltd.     

Analysis of inorganic anions by electrostatic ion chromatography using zwitterionic/cationic mixed micelles as the stationary phase

The inability to separate fluoride, phosphate and sulfate by electrostatic ion chromatography (EIC) was overcome by using an ODS silica column coated with mixed zwitterionic-cationic surfactants as the stationary phase. The best results were obtained using the zwitterionic surfactant, 3-(N,N-dimethylmyristylammonium)-propanesulfonate (C₁₉H₄₁NO₃S), and the cationic surfactant, myristyltrimethylammonium, CH₃(CH₂)₁₃N⁺(CH₃)₃, in a 10:1 molar ratio in the column coating solution. With a dilute solution of sodium tetraborate as the eluent the model analyte anions were completely separated in the following elution order: F^–, HPO₄ ^2–, SO₄ ^2–, Cl^–, NO₂ ^–, Br^–, NO₃ ^–. The very early elution of phosphate and sulfate is most unusual and is unique to this system. Detection limits better than 1.1 × 10^–4 mM and linear calibration plots up to 7.0 mM were obtained with a suppressed conductivity system.     

Efficient Transition‐Metal‐Free Oxidation of Benzylic and Secondary Alcohols to the Carbonyl Compounds Using an N‐Bromosuccinimide/NH4Cl System

The oxidation of a variety of benzylic and secondary alcohols was achieved in excellent yields using an NBS/NH₄Cl system in aqueous acetonitrile (CH₃CN‐H₂O; 7/3 v/v) at 80°C under very mild conditions.     

Simultaneous determination of thiols and disulfides by high-performance liquid chromatography with fluorescence detection

The proposed simultaneous determination of thiols and disulfides requires 4- (aminosulfonyl)- 7-fluor-2,1,3,-benzoxadiazole (ABD-F) as the pre-column derivatization reagent for thiols and ammonium 7-fluoro-2,1,3,-benzoxadiazole-4-sulfonate (SBD-F) for disulfides followed by chromatography. The thiols and disulfides in solution are treated with ABD-F at 60°C for 5 min in pH 9.3 borate buffer containing 1 nM disodium-EDTA. After removal of excess of ABD-F with ethyl acetate, the remaining disulfides in the aqueous phase are treated with SBD-F at 60°C for 20 min in the presence of tri-n-butylphosphine, a reducing agent. The ABD-thiols and SBD-thiols thus produced are separated by reversed-phase chromatography and detected by fluorimetry (380- nm excitation, 510 - nm emission). SBD-cystein, SBD-homocystein, ABD-homocysteine, ABD-cysteine, SBD-glu- tathione, ABD-homocystein, SBD-N-acetylcystein, ABD-glutatione and ABD-N-acetylcysteine are well separated by linear gradient elution from 0.15 M H₃PO₄/CH₃CN (96:4) to 0.15 M H₃PO₄/CH₃CN (85:15) over 30 min followed by isocratic elution with 0.15 M H₃PO₄/CH₃CN (85:15) fro 10 min. The detection limits for the derivatives are in the range 0.09–0.9 pmol. When the method was applied to the determination of thiols and disulfides in rat tissues, cystein (0.75 μmol g^-1) and cystine (0.62 μmol g^-1) were obtained in kidney and reduced glutathione (1.4–3.4 μmol g^-1) was observed in liver, spleen, heart and testicle.