Development and validation of high-performance thin-layer chromatographic method for determination of amygdalin

ABSTRACT

A new method for the extraction and quantitative determination of amygdalin has been proposed. Accelerated solvent extraction was applied for the extraction, and reversed-phase high-performance thin-layer chromatography method was developed, validated, and applied for the determination of amygdalin in the extracts of apricot, plum, almond, and peach kernels. The chromatographic system used was RP-18 silica, as stationary phase and acetonitrile/water (50:50, v/v), as mobile phase. Densitometric scanning was performed at 210 nm. The method was validated with respect to specificity, linearity, precision, and accuracy. The results showed that the peak area responses were linear within the concentration range of 2.5–50.0 µg/spot (R² = 0.9984). The limit of quantification was 4.28 µg/spot, and the detection limit 1.28 µg/spot. The intra-day and inter-day reproducibility, in terms of %RSD, were in the range of 0.81–1.15 and 1.32–1.89, respectively. The accuracy data were in the range from 99.98 to 100.56%. The method is linear, quantitative and reproducible, and could be used as an efficient and economical green chromatographic procedure for the determination of amygdalin in the fruit kernel.     

Determination of Trifloxystrobin,Tebufenozide, and Halofenozide in Foods by Micellar Electrokinetic Capillary Chromatography

A simple and rapid micellar electrokinetic capillary chromatography method of trifloxystrobin, tebufenozide, and halofenozide has been developed. The separation was performed in a 10 mM borate-18 mM SDS buffer solution (pH = 9.0), containing 22.5% v/v of acetonitrile, 25 kV and detection at 202 nm. The linear concentration range of application was 0.5–10.0 mg L^?1, with a detection limit of 0.094 mg kg^?1 for trifloxystrobin and 0.088 mg kg^?1 for tebufenozide and halofenozide. Analysis yielded good reproducibility (RSD between 1.7–8.7%). The applicability of the method was tested by analyzing several fortified samples of tomato, celery, and apple juices. Recovery levels were between 70.0 and 110.8%.     

HPLC Quantification of Azintamide and Papaverine Hydrochloride Simultaneously in Pharmaceutical Preparations

Abstract

A simple HPLC-procedure for quantification of azintamide and papaverine. HCl simultaneouly in dosage formulations has been investigated. The complete resolution and quantitative determination of both drug substances has been undertaken on a Hibar 100RP-18 Lichrospher (5 μm) column by using a solvent mixture composed of acetonirile – water (56:44, v/v) isocratically at a rate of 1 ml·min^?1with UV-detection at 240 nm. Recovery percentages of 100.39 ± 0.70 (n = 12) and 99.97 ± 1.11 (n = 12) were obtained for added azintamide and papaverine. HCl, in order.     

A Simple and Rapid Reversed Phase High Performance Liquid Chromatographic Method for Quantification of Alprazolam and α-Hydroxyalprazolam in Plasma

Abstract

A simple and rapid reversed-phase liquid chromatographic method for the determination of alprazolam and a-hydroxyalprazolam in plasma is described. Flunictrazepam was used as internal standard. Plasma samples were buffered with sodium borate and extracted with dichloromethane /n-pentane 4:6 v/v for 60 sec on a vortex apparatus. Extraction solvent was evaporated to dryness and extraction residues were reconstituted in the mobile phase. Samples were chromatographed on a 5μ Lichrospher RP-18 column (25cm × 4mm i. d) using acetonitrile/water 40:60 v/v as the mobile phase. The column effluent was monitored at 230nm. The lower limit of detection was 1ng/ml for alprazolam and a-hydroxyalprazolam while the lower limit of quantification was 2ng/ml for both compounds. Peak height and plasma     

Determination of 8-hydroxyquinoline sulfate in tuberculin solutions by planar and high performance liquid chromatography

Summary TLC and HPLC methods for the determination of the preservative, 8-hydroxyquinoline sulfate in PPD-T tuberculin solution were developed. The planar chromatography method involved separation of 8-hydroxyquinoline sulfate on a TLC plate using a butyl-acetate: formic acid: 2-propanol mobile phase, detection and quantitation by densitometric scanning. The HPLC method was on a LiChrosorb RP-18 column with acetonitrile-water (65:35 v/v) mobile phase, adjusted to pH 3.05 by phosphoric acid. Linearity, reproducibility and accuracy were found to be satisfactory. Under selected conditions, the limit of detection (LOD) of both methods was similar-about 25 ng. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Determination of methylparaben,propylparaben, clotrimazole and its degradation products in topical cream by RP-HPLC

Summary Reversed-phase, high-performance liquid chromatographic (RP-HPLC) methods with UV detection were developed and validated for determination of compounds in a topical cream. The first method describes determination of the active component clotrimazole and two preservatives present in the cream; methylparaben and propylparaben. The second method describes determination of two degradation products of clotrimazole, imidazole and (2-chlorophenyl) diphenylmethanol, in a topical cream after long-term stability tests. Chromatographic separation was on a Purospher RP-18e column; the mobile phase in Method1 for separation of clotrimazole, methylparaben and propylparaben comprises acetonitrile and water (70:30 v/v). For determination of degradations products-imidazole and (2-chlorophenyl) diphenylmethanol—the optimum composition of mobile phase in Method2 was acetonitrile and water (75:25 v/v) apparent pH^* 2.7. Analysis time was <10 min for both methods. The methods were found to be applicable for routine analysis of the active compound clotrimazole, preservatives and degradation products in the pharmaceutical product: topical cream 1% Clotrimazol Cream. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Optimization and development of a high‐performance liquid chromatography method for the simultaneous determination of vitamin E and carotenoids in tomato fruits

A simple and reliable high‐performance liquid chromatography method was developed and validated for the simultaneous determination of lipophilic antioxidants in tomato fruits using C₃₀ column operated at 15°C and a gradient mobile phase based on acetonitrile/methanol/dichloromethane in a total run time of 30 min. Diode array and fluorescence detectors were used respectively for the detection of carotenoids (lutein, zeaxanthin, cryptoxanthin, lycopene, and β‐carotene) and vitamin E analogs (α‐, β‐, γ‐, and δ‐tocopherols, and tocotrienols). The best extraction yield of analytes in tomato fruits was achieved by employing ethyl acetate/hexane (1:1, v/v) after several treatments with various solvents. In addition, low extraction yields were obtained for carotenoids compared to tocopherols by adopting solid‐phase extraction as a second clean‐up step. The method was validated on the basis of recovery, precision, linearity, and limit of detection and quantification using spiked tomato samples. The method was applied to cherry and medium‐sized tomato fruits. Lycopene was found to be present in largest amount in tomato pulp, followed by β‐carotene and lutein. Due to its simplicity, rapidity, and efficiency, the method is suitable for routine analysis of lipophilic antioxidants in tomato fruits, and may also be applied to other vegetables of similar phytochemical profiles.     

LC Analysis of Lignans from Schisandra sphenanthera Rehd. et Wils.

Schisandra sphenanthera Rehd. et Wils. is widely used in traditional Chinese medicine. A rapid and convenient method to separate and quantify four lignans (schisandrin, schisantherin A, deoxyschizandrin, and γ-schizandrin) was established by reversed-phase liquid chromatographic. On a Shimadzu C₁₈ column (Phenomenex, 150 × 4.6 mm; 5 μm particle size), an isocratic flow elution program and a simplified sample pretreatment approach were used in the experiment. Samples from different parts of S. sphenanthera were extracted by chloroform and then separated with methanol and deionized water (70:30 v/v) at a flow rate of 0.8 mL min⁻¹. The detection wavelength was set at 280 nm. The content of lignans in fruits is the highest, and the quantities of schisantherin A, deoxyschizandrin, and γ-schizandrin from fruits are 0.56, 0.54 and 0.30%, respectively. Schisandrin is not detected in all the plant extracts. This research forms a basic framework for the better use of S. sphenanthera in medicine.

     

Liquid-chromatographic determination of sulfadimidine in milk and eggs

A method for the determination/identification of residual sulfadimidine (SDD) in milk and eggs by high-performance liquid chromatography (HPLC) with a photo-diode array detector was developed. The sample preparation was performed by shaking with a mixture of 20% (w/v) trichloroacetic acid-methanol (4:1, v/v) followed by ultra-filtration using Molcut II^®. A LiChrospher^® 100 RP-8 (e) column and a mobile phase of 4% (v/v) acetic acid solution-acetonitrile (6:4, v/v) were used. The average recoveries from spiked SDD samples were 80.8–88.0% with coefficients of variation of 2.8–5.5%. The limits of detection in milk and eggs were 0.01 μg/mL and 0.01 μg/g, respectively. The total time required for the analysis of one sample was less than 20 min.     

LC Analysis of Lignans from Schisandra sphenanthera Rehd. et Wils.

Schisandra sphenanthera Rehd. et Wils. is widely used in traditional Chinese medicine. A rapid and convenient method to separate and quantify four lignans (schisandrin, schisantherin A, deoxyschizandrin, and γ-schizandrin) was established by reversed-phase liquid chromatographic. On a Shimadzu C₁₈ column (Phenomenex, 150 × 4.6 mm; 5 μm particle size), an isocratic flow elution program and a simplified sample pretreatment approach were used in the experiment. Samples from different parts of S. sphenanthera were extracted by chloroform and then separated with methanol and deionized water (70:30 v/v) at a flow rate of 0.8 mL min^?1. The detection wavelength was set at 280 nm. The content of lignans in fruits is the highest, and the quantities of schisantherin A, deoxyschizandrin, and γ-schizandrin from fruits are 0.56, 0.54 and 0.30%, respectively. Schisandrin is not detected in all the plant extracts. This research forms a basic framework for the better use of S. sphenanthera in medicine.     

High-performance liquid chromatographic determination/identification of oxytetracycline and sulphadimidine in meat and eggs

Summary A rapid method for the simultaneous determination/identification of residual oxytetracycline (OTC) and sulphadimidine (SDD) in meats (beef, pork, chicken) and eggs by high-performance liquid chromatography (HPLC) was developed. The extraction of OTC and SDD was performed using a Sep-Pak^? CN cartridge. The extracts contained OTC/SDD analytes when examined by HPLC using a LiChrospher^? 100 RP-8 end-capped column and a mobile phase of acetonitrile-acetic acid-water (28:4:68, v/v/v) with a photodiode array detector. The average recoveries from spiked samples (0.1 μg g⁻¹ and 1.0 μg g⁻¹) were in excess of 80.2% with coefficients of variation between 1.5 and 5.0%. The limits of detection for OTC and SDD were 0.05 and 0.02 μg g⁻¹, respectively.     

Development and Validation of a High-Performance Liquid Chromatographic Determination of Ceftriaxone Sodium and Its Application to Drug Quality Control

Abstract

A reliable and sensitive RP-HPLC method was developed and validated for the quantitative estimation of ceftriaxone sodium (CFTZ) in pure drug and pharmaceutical dosage forms. The separation of ceftriaxone sodium was achieved on a Waters XTerra RP-18 (5 µm, 250 × 4.6 mm i.d.) column using photodiode array detector at 240 nm. The mobile phase consisted of 0.1 M triethylammoniumacetate–acetonitrile (60:40 v/v) mixture delivered at a flow rate of 1.0 ml/min. Accuracy, evaluated by means of the spike recovery method, was excellent, with percent recovery in the range 99.5–102% with precision in the range 0.3–1.2%.     

Analysis of Aromatic Amines in Surface Waters Receiving Wastewater from a Textile Industry by Liquid Chromatographic with Electrochemical Detection

Abstract

A high performance liquid chromatography (HPLC) method with electrochemical detection (ED) was developed for the determination of benzidine, 3,3‐dimethylbenzidine, o‐toluidine and 3,3‐dichlorobenzidine in the wastewater of the textile industry. The aromatic amines were eluted on a reversed phase column Shimadzu Shimpack C₁₈ using acetonitrile+ammonium acetate (1×10^?4 mol L^?1) at a ratio 46:54 v/v as mobile phase, pumped at a flow rate of 1.0 mL min^?1. The electrochemical oxidation of the aromatic amines exhibits well‐defined peaks at a potential range of +0.45 to +0.78 V on a glassy carbon electrode. Optimum working potentials for amperometric detection were from 0.70 V to +1.0 V vs. Ag/AgCl. Analytical curves for all the aromatic amines studied using the best experimental conditions present linear relationship from 1×10^?8 mol L^?1 to 1.5×10^?5 mol L^?1, r=0.99965, n=15. Detection limits of 4.5 nM (benzidine), 1.94 nM (o‐toluidine), 7.69 nM (3,3‐dimethylbenzidine), and 5.15 nM (3,3‐dichlorobenzidine) were achieved, respectively. The detection limits were around 10 times lower than that verified for HPLC with ultra violet detection. The applicability of the method was demonstrated by the determination of benzidine in wastewater from the textile industry dealing with an azo dye processing plant.     

Determination of Florfenicol in Freshwater, Sediments and Bryophyte Fontinalis antipyretica by HPLC with Fluorescence Detection

Novel procedures for the determination of florfenicol in freshwater, sediments and bryophyte Fontinalis antipyretica, using reversed-phase high-performance liquid chromatography are described. Liquid chromatography was performed on a 5 µm PuroSpher RP-18E^® column using methanol and 0.05 M phosphate buffer (18/82 v/v, pH 7.3) as mobile phase (0.8 ml min^?1) and fluorescence detection (excitation wavelength 265 nm and emission wavelength 295 nm). Florfenicol was determined in centrifuged freshwater samples. Florfenicol was extracted from sediments and bryophytes samples by using a solid-liquid extraction step followed by a solid phase extraction step. Linearity was confirmed over the concentration range 25–1000 ng mL^?1 water and 50-1000 ng g^?1 sediment or bryophyte. Limits of detection and quantitation were 8 and 25 ng mL^?1 water and 17 and 50 ng g^?1 sediment or bryophyte respectively. Mean extraction recoveries of florfenicol from sediments and bryophyte were from 85.9 to 109.1%.     

Development and Validation of Stability-Indicating HPLC Methods for Quantitative Determination of Pravastatin,Fluvastatin, Atorvastatin,and Rosuvastatin in Pharmaceuticals

Abstract

High-performance liquid-chromatographic (HPLC) methods were validated for determination of pravastatin sodium (PS), fluvastatin sodium (FVS), atorvastatin calcium (ATC), and rosuvastatin calcium (RC) in pharmaceuticals. Two stability-indicating HPLC methods were developed with a small change (10%) in the composition of the organic modifier in the mobile phase. The HPLC method for each statin was validated using isocratic elution. An RP-18 column was used with mobile phases consisting of methanol–water (60:40, v/v, for PS and RC and 70:30, v/v, for FVS and ATC). The pH of each mobile phase was adjusted to 3.0 with orthophosphoric acid, and the flow rate was 1.0 mL/min. Calibration plots showed correlation coefficients (r) > 0.999, which were calculated by the least square method. The detection limit (DL) and quantitation limit (QL) were 1.22 and 3.08 µg/mL for PS, 2.02 and 6.12 µg/mL for FVS, 0.44 and 1.34 µg/mL for ATC, and 1.55 and 4.70 µg/mL for RC. Intraday and interday relative standard deviations (RSDs) were <2.0%. The methods were applied successfully for quantitative determination of statins in pharmaceuticals.     

Simultaneous Determination of Avermectin and Milbemycin Residues in Bovine Tissue by Pressurized Solvent Extraction and LC with Fluorescence Detection

A rapid and sensitive method has been developed for the simultaneous determination of four avermectins and one milbemycin residues in bovine tissue. The isolation of the analytes from muscle and liver samples was accomplished utilizing a pressurized solvent extractor. The optimized extraction procedure using acetonitrile/water (40:60, v/v) as extraction solvent, was automatically carried out at 100 °C and 10 MPa, applying two static cycles for 3 min. The extracts were cleaned up on a C₁₈ solid-phase extraction cartridge and analyzed by liquid chromatography with fluorescence detection after derivatization. Mean recoveries of the five analytes from fortified samples were between 84.8 and 101.8%, with relative standard deviations lower than 10.8%. The limit of detection and quantification were in the ranges of 0.1–0.2 and 0.5–0.6 μg kg^–1, respectively. The application of the newly developed method was demonstrated by analyzing bovine meat samples from market.     

Simultaneous Estimation of Ceftazidime and Ceftizoxime in Pharmaceutical Formulations by HPLC Method

The aim of the present study was to develop a fast, sensitive and reliable method for rapid screening of cephalosporin injectable dosage forms namely ceftazidime and ceftizoxime to the detection of counterfeit and substandard drugs that might be illegally commercialized. Ceftazidime, ceftizoxime and cefixime (IS) were separated in a X-Terra RP-18 column (250 × 4.60 mm ID × 5 ??) and DAD detector set at 290 and 260 nm. The mobile phase consisted of a mixture of methanol:water 20:80 (v/v) at a flow rate of 1.0 mL min^?1. Additionally, in order to find the optimum pH value of separation the pK _a values of studied compounds were determined by using two different methodologies. Aqueous pK _a values of studied compounds have been determined by UV-spectrophotometry and liquid chromatography were used for the determination and direct characterization of the dissociation constants by using the dependence of the capacity factor on the pH of the mobile phase in 20% (v/v) methanol?Cwater binary mixture in which separation was performed. The pH of the mobile phase was adjusted with 25 mM H₃PO₄ to 3.2. The method was shown to be linear, sensible, accurate, and reproducible over the range of analysis and it can be used to pharmaceutical formulations containing a single active ingredient within a short analysis time.     

A derivative UV spectrophotometric method for the determination of levothyroxine sodium in tablets

A derivative UV (D-UV) spectrophotometric method was developed for the determination of Levothyroxine Sodium (L-T₄) in tablets of different doses. Quantification was performed using the second derivative of the absorption spectrum at 253 nm (²D₂₅₃) in methanol: water (50: 50; v/v) (pH 11.2). The method was validated and compared with an HPLC procedure carried out using a RP-18 column (125 × 4 mm, 5 μm) and methanol: phosphoric acid (0.1%) (70: 30, v/v) (pH 3) as mobile phase. Flow rate was set at 1.5 mL/min, and detection was performed at 225 nm. The proposed D-UV method was linear in the range 3.0–40.0 μg/mL with an appropriate precision and accuracy, and it was selective for the drug under study. On the other hand, results obtained by ²D₂₅₃ analysis were similar to those obtained by HPLC, with no statistically significant differences between them. Therefore, it was concluded that the developed method is suitable for the determination of L-T₄ in tablets at the tested doses.     

Development of a Validated Stability-Indicating LC Assay and Stress Degradation Studies of Linezolid in Tablets

This paper describes the validation of an isocratic LC method for the assay of linezolid in tablets. Validation parameters such as linearity, precision, accuracy, specificity, limit of detection, limit of quantitation and robustness were determined. LC was carried out by reversed phase technique on an RP-18 column with a mobile phase composed of 1% acetic acid:methanol:acetonitrile (50:25:25, v/v/v). Linezolid and your combination drug product were exposed to acid, base, oxidation, dry heat and photolytic stress conditions. A linear response (r > 0.9999) was observed in the range of 8.0–20.0 μg mL⁻¹. The retention time of linezolid was 4.6 min. The method showed good recoveries and intra- and inter-day relative standard deviations were less than 1.0%. The LOD and LOQ were 0.21 and 0.63 μg mL⁻¹, respectively. The developed LC method for determination of related substances and assay determination of linezolid can be used to evaluate the quality of regular production samples. It can also be used to test the stability samples of linezolid.

     

Chemical Studies on Tobacco Smoke LXVII. Quantitative Determination of Alkaloids in Tobacco by Liquid Chromatography

Abstract

An HPLC method was developed for the quantitative determination of individual alkaloids of the basic fraction of tobacco extracts. Two reverse phase RP-18 columns were used, eluting with a gradient of aqueous triethylamine phosphate buffer (pH 7.56) and acetonitrile.

The method was optimized and compared favorably with existing quantitative techniques in regard to time factors, sensitivity and accuracy.