Size Exclusion Chromatography of Polyamides

Abstract

We report here a new chromatographic method for characterization of polyamides and polyether-block-amide copolymers by Size Exclusion Chromatography. First, it concerns absolute characterization of polyamide probes by classical light scattering and Ubbelohde viscometry measurements and the choice of narrow distribution standards to calibrate the GPC system. The GPC analysis of polyamides 6, 11, 12 and copolymers is based upon the dual detection refractometer/on-line continuous viscometer at 130°C using columns packed with cross-linked polystyrene gels, benzyl alcohol as mobile phase and polytetrahydrofuran standards for calibration. The main results are absolute average molecular weights and distribution curve, intrinsic viscosity and viscosity law. In addition, viscometric data produced evidence of long-chain branching occuring beyond a limiting molecular weight in some polyamide 12 samples.     

High Performance Size Exclusion Chromatography Using Porous Glass Packing Materials

Abstract

Porous glass packing materials of average particle diameter 5 μm have been packed into a 7.2 mm i.d. x 25 cm column by viscousslurry packing parocedure. Average pore diameters of porous glasses were 170 Â, 500 Â, 1000 A, and 2000 A. The numbers of theoretical plates were between 7000 and 8000 per a column for porous glasses of pore diameters of 170, 500, and 1000 A, and 5000 for that of 2000 A. The retention volumes of narrow molecular weight-distribution polystyrene standards have been determined using tetrahydrofuran as mobile phase for the construction of calibration curves. Separations of polystyrene over molecular weight ranges of 1000 and 4,000,000 have been obtained by combining all four porous glass columns in series. Molecular weight averages of NBS 706 polystyrene have been measured and compared with the values determined with polystyrene gel columns. Both results were equivalent to the manufacturer's data. Porous glasses thus appear to be a useful packing materials for HPSEC.     

Carbohydrate Analysis by High Pressure Liquid Chromatography Using Water as the Eluent

Abstract

A μ-Bondapak C-18 column separates, by reverse phase process, mono, di and oligosaccharides within 40 min when water is used as eluent. The fractionation capabilities of this column are a function of experimental conditions (temperature and flow-rate). Chromatograms showing separations obtained for different carbohydrate mixtures are presented and discussed in terms of solubility parameters.     

Characterization of Xylansulfate by Size Exclusion Chromatography

Abstract

A sulfated, low molecular weight beech xylan was fractionated preparatively on Sephadex G-50 into ten fractions with molecular weights from 17 000 to 1 800. The degree of sulfation, refractive index increment, molecular weight, and specific optical rotation of each fraction was determined. The fractions were then used to calibrate a Sephacryl S–200 gel column for the molecular weight distribution analysis of xylansulfate.

The molecular weights, M _W, obtained by SEC for samples of xylansulfate were in good agreement (within 4 ± 1%) to the values derived by low angle light scattering.     

Continuous Viscometric Detection in Size Exclusion Chromatography

Abstract

Continuous viscometric detection is based on the measurement of pressure drop in an on-line small capillary tube in which chromatographic eluents flow at constant flow rate. This detector is always coupled with a concentration detector (usually refractometer) and located before it to avoid back pressure in the refractometer. In order to obtain reliable information for polymer samples, it is generally necessary to connect these two detectors to a computer which performs data acquisition and treatment.

First, we discuss the problem of shape, geometry and dimensions of the viscometer. The typical characteristics are the result of a compromise between contradictory targets, mainly small internal volume, low shear rate and low pressure drop. It is shown that Poiseuille's laminar flow is only obtained when coiling radius of the measurement tube is greater than 6 cm, which is not the case inside the refractometer. Accordingly, two pressure transducers are necessary to eliminate pressure drop data coming from refractometer.

In a second part, we show how to extract information from pressure variation data. By using concentration data, pure solvent pressure and sample pressure it is possible to calculate intrinsic viscosity extrapolated to zero concentration at each point of the chromatogram. By comparison with intrinsic viscosity of the polymer used for calibration, a correction of hydrodynamic volume according to Benoit's universal calibration leads to absolute molecular weights.

In addition, for a linear polymer, the knowledge of log [η] versus log M leads to the determination of Mark-Houwink relationship coefficients. For branched polymers, viscosity laws are curved and the comparison between the linear law corresponding to the linear equivalent polymer and the experimental law allows the determination of the g' branching parameter distribution.     

Size Exclusion Chromatography of Poly(vinylpyrrolidone)

Abstract

Poly(vinylpyrrolidone) and poly(ethylene oxide) separate by hydrodynamic volume on Toyo Soda TSK-PW columns in a mixed solvent mobile phase of 50:50 (v/v) MeOH/H₂O containing 0.1M LiNO₃. From this separation a single universal calibration curve based on hydrodynamic volume [η]M can be obtained. Accurate weight average molecular weights of PVP were obtained by both SEC/LALLS and universal calibration showing good agreement between the two methods. SEC/LALLS overestimates the number average molecular weight for broad distribution polymers due largely to the lack of sensitivity of the LALLS detector to the low molecular weight portion of the polymers, while the universal calibration method slightly underestimates the number average molecular weight as compared to osmometric values.     

Quantitative Size Exclusion Chromatography: Assessing New Developments

Abstract

Methods of assessing new technology are achieving increased importance because rapid technological changes cause obsolescence of evaluations before they are completed. Users now must often evaluate the specific version of the new technology that they receive. Four major areas are used here to provide examples of assessment methods: high resolution columns, coupled concentration-molecular weight-differential viscometer detectors, flow rate monitoring using a thermal pulse flowmeter and determination of Mark-Houwink constants from polydisperse standards. Specific methods of assessment examined centre about error analysis and sensitivity analysis. Several of the methods use the conventional calibration curve. The idea of correction priority (i.e. thoroughly examining the most fundamental significant corrections first) is emphasized.     

Size Exclusion Chromatography of Nonionic and Anionic Copolymers of Vinylpyrrolidone

Abstract

Size exclusion chromatography (SEC) of poly(vinylpyrrolidoneco-vinylacetate), PVPVA, and poly(vinylpyrrolidone-co-dimethylamincethylmethacrylate-co-vinylcaprolactan),PVPDMMAEMAVC, is evaluated in terms of resolution between polymer and solvent peaks using aqueous and nonaqueous mobile phases. A 1:1 (v/v) water/methanol, 0.1M LiNO₂ mobile phase is used with four Waters Ultrahydrogel columns with pore sizes of 120Å, 500Å, 1000Å, and 2000Å. DMF, 0.1M LiNO₃ mobile phase is used with three different two column sets. Two of the column sets are comprised of a mixed bed packing of poly(styrene-co-divinyl benzene), obtained from Shodex (KD80M), followed by either an Ultrahydrogel 120Å or a PLge1 100Å. The third two column set is a PLge1 10⁴Å followed by a PLgel 500Å. Any of the second columns in these sets improve separation between the trailing end of the polymer peak and the leading end of the solvent peak but the column set using an Ultrahydrogel 120Å yields a separation of these peaks whose valley is closer to the baseline. The aqueous mobile phase with the four column set yields a separation between the trailing end of the polymer peak and the leading end of the solvent peak whose valley is closest to the baseline. Recovery of PVPVA and PVPDMAEMAVC from the columns evaluated is 100%. Vinylpyrrolidone compositions of PVPVA ranging from 30 to 70 mole % were studied using both mobile phases. SEC of     

Comparing Dichromate Oxidation and Size Exclusion Chromatography of Dissolved Carbohydrates

Standardised methods are used to characterise the pulp or cellulosic material for its alkali resistance and alkali solubility. Today, pulp is usually characterised by its solubility in sodium hydroxide. The characterisation test was based on the treatment of pulp with sodium hydroxide solution of a defined concentration, according to a specified procedure. The dissolved organic matter was then determined by dichromate oxidation. The results obtained by size exclusion chromatography showed that both the amount and the molecular weight of the dissolved carbohydrates vary when investigating solubility and α-cellulose content of pulps. The results show further that S₁₈ values obtained by dichromate oxidation are overestimated when characterising pulps containing higher amounts of hemicellulose and/ or short chain cellulose, compared with results obtained by the SEC method. On the contrary, S₁₀ values are overestimated when determined by dichromate oxidation in higher alpha pulps.     

高效体积排阻色谱法测定改性柑橘果胶的分子质量

改性柑橘果胶(MCP)是一种具有抗肿瘤细胞生长、侵袭和转移活性的多糖。由于多糖的分子质量对其活性有很大的影响,因而需要测定其分子质量。选择的色谱条件为：TSK G3000PWXL色谱柱,以50 mmol/L醋酸铵缓冲液为流动相,流速为0.5 mL/min,柱温为40 ℃,样品质量浓度为10 g/L,进样体积为20 μL,示差折光检测器检测。采用Pullulan糖标准品,经校正获得回归方程,通过回归方程计算得到的MCP平均相对分子质量为:Mn为21000,Mp为46000,Mw为43000,Mz为66000。MCP的多分散性指数(PD)为2。该方法具有良好的重现性,而且简便、快速,为MCP的生产工艺、质量控制和组效关系等的研究提供了实用的分析检测手段。     

Size Exclusion Chromatography of Polymers With Random Tetrafunctional Branching

Abstract

The behaviour of polydisperse branched copolymers of methyl methacrylate with a small amount of randomly situated tetrafunctional ethylenedimethacrylate units was investigated by means of size exclusion chromatography (SEC). A procedure has been suggested for the conversion of apparent values of molecular parameters of real polymer branched systems (M_{n, app}; M_{w, app} obtained from SEC data by calibration of the separation system using a linear polymer) into actual values. This was made possible by off-line coupling of SEC and viscometry. The branching was characterized by the weight average number of branching sites in the macro-molecule, m_w, and the branching index, y.     

Characterization of Polymer Architectures by Multidetection Size Exclusion Chromatography

Summary: This paper discusses the analysis of star-branched and dendritic polyisobutylenes (PIBs) using branching parameters based on radii of gyration R_g,z and hydrodynamic radii R_h,z. R_g,z and R_h,z were measured by Size Exclusion Chromatography equipped with a Wyatt Technology Viscostar viscometer (VIS), a Wyatt Optilab DSP RI detector, a Wyatt DAWN EOS 18 angle Multiangle Light Scattering (MALS) detector and a Wyatt Quasi-elastic Light Scattering QELS detector. Branching parameters were calculated from these measurements and compared with those computed for these architectures.     

Computer Assisted Data Acquisition and Analysis for Size Exclusion Chromatography

Abstract

Two programs, ACEACQ and ACEANN, provide data acquisition and analysis for Size Exclusion Chromatography (SEC). ACEACQ is used for data logging, real-time smoothing and data reduction by boxcar averaging. ACEACQ requires that traditional SEC hardware be coupled with a Hewlett Packard data logger and microcomputer. A Mettler electronic balance is connected to the computer in a novel fashion to continuously monitor the mass of solvent eluted during an experiment. ACEANN provides analysis for the data collected by ACEACQ. Calculations include molecular weight averages, molecular hydrodynamic diameter averages and column separation efficiency parameters. Significant reductions in analysis time have been realized along with improvements in accuracy of data acquisition, analysis and experimental reproducibility.     

芳香酸淋洗液的单柱阳离子色谱法测定碱金属,铵离子和烷基胺

研究了邻苯二甲酸、苯甲酸和对羟基苯甲酸３种芳香酸分别做淋洗液的单柱阳离子色谱法分离测定Ｌｉ＋、Ｎａ＋、ＮＨ４＋、Ｋ＋、甲胺、乙胺和正丙胺７种物质。３种芳香酸做淋洗液均可将７种物质分离开，且分离结果差异不大。在淋洗液浓度相同的条件下，邻苯二甲酸做淋洗液测定的检出限较低。选择３．０ ｍｍｏｌ／Ｌ邻苯二甲酸做淋洗液测得了上述７种物质的检出限和线性范围，并进行了叶面肥试样分析，７种物质的加标回收率在９６．４％～９８．６％之间。     

Characterization of LC Stationary Phases by Inverse Size Exclusion Chromatography

Abstract

The most efficient use of a porous particulate stationary phase can only be made when the material in the column is fully characterized. While complete characterization includes both chemical and physical aspects, the macro structure provides the framework for the microscopic chemical interactions. The physical analysis is therefore critically important for a more complete calibration of the chromatographic effects.     

Characterization of Nonionic Polyacrylamides by Aqueous Size Exclusion Chromatography Using a DRI/LALLSP Detector System

Abstract

Herein is reported an experimental investigation of the molecular weight characterization of nonionic polyacrylamides by aqueous SEC with a DRI/LALLSP detector system. Methodology for the use of the DRI/LALLSP detector responses to determine the molecular weight calibration curve and the peak broadening parameter, [sgrave]² (variance of a Gaussian instrumental spreading function) over a wide molecular weight range has been developed. The method is based on the use of a broad MWD standard made by blending Polysciences broad MWD standards and a generalized analytical solution of Tung's integral equation for the detector response corrected for peak broadening. Molecular weight averages measured by SEC/DRI/LALLSP are in excellent agreement with those measured offline by LALLSP.     

High Performance Size Exclusion Liquid Chromatography of Small Molecular Weight Peptides from Protein Hydrolysates Using Methanol as a Mobile Phase Additive

Abstract

The separation of low molecular weight peptides according to their molecular weight has been a challenge. The earlier works using chaotropic additives in the mobile phase such as SDS or guanidium chloride failed to give a linear response for the semilogarithmic graph of molecular weight versus retention time. Here we report a mobile phase composition suited to the size exclusion separation of the peptides of molecular weight between 6000 and 250 on a TSK-SW 2000     

两性化合物与离子对试剂的混合物作流动相的流动相离子色谱法测定气溶胶中水溶性阴离子

用流动相离子色谱法(MPIC),以两性化合物与离子对试剂的混合溶液为流动相,在C18柱上抑制电导检测分析气溶胶中常规无机阴离子和有机酸。实验采用氢氧化四丁基铵(TBAOH)为离子对试剂,与两性化合物3-(N-吗啉)-1-丙磺酸(MOPS)混合,加入Na2CO3无机添加剂作流动相,其浓度为1mmol／L TBAOH／5mmol／LMOPS／0．5mmol／LNa2CO3。分离柱采用硅质C18柱,抑制电导检测。可以较好地分离和检测常见的无机和有机阴离子。该方法具有较好的重现性和线性关系,F^-、Cl^-、NO2^-、Br^-、C3H3O3^-、NO3^-的回收率分别为102．0％、104．6％、102．4％、97．8％、97．75％和102．5％;检出限分别为0．017、0．014、0．0048、0．036、0．16和0．017mg／L。     

Relative Quantification of Sites of Peptide and Protein Modification Using Size Exclusion Chromatography Coupled with Electron Transfer Dissociation

One difficult problem in the analysis of peptide modifications is quantifying isomeric modifications that differ by the position of the amino acid modified. HPLC separation using C18 reverse phase chromatography coupled with electron transfer dissociation (ETD) in tandem mass spectrometry has recently been shown to be able to relatively quantify how much of a given modification occurs at each amino acid position for isomeric mixtures; however, the resolution of reverse phase chromatography greatly complicates quantification of isomeric modifications by ETD because of the chromatographic separation of peptides with identical modifications at different sequence positions. Using peptide oxidation as a model system, we investigated the use of size exclusion chromatography coupled with ETD fragmentation to separate peptide sequences. This approach allows for the benefits of chromatographic separation of peptide sequences while ensuring co-elution of modification isomers for accurate relative quantification of modifications using standard data-dependent acquisitions. Using this method, the relative amount of modification at each amino acid can be accurately measured from single ETD MS/MS spectra in a standard data-dependent acquisition experiment.

Open image in new window

Graphical Abstract ?