醋酸水流动相体系中硅胶键合相上生物大分子保留行为的研究

 提出了以醋酸 水作为流动相的体系中 ,在ODS柱上分离生物大分子的反相高效液相色谱 (RPLC)方法。实验结果表明 ,醋酸 水的洗脱能力强于甲醇 水 三氟醋酸体系 ,在一定程度上克服了色谱分离中一些蛋白质的不可逆吸附且具有便于冷冻干燥的优点。用参数Z(1mol溶剂化溶质被溶剂化固定相吸附时从两者接触表面释放出置换剂的摩尔总数 ) ,logI(与 1mol溶质对固定相亲和势有关的常数 )和 j(与 1mol溶剂对固定相亲和势有关的常数 )对 9种蛋白质在此流动相体系中的保留进行了表征。     

在脂肪酸-水流动相中小分子在反相高效液相色谱中的保留表征

在反相液相色谱(RPLC)中用Snyder经验议程和计量置换保留模型(SDM-R)中的参数对深质为脂肪醇同系物,流动相为脂肪酸同系物时深质的保留行为进行了研究,结果表明用SDM-R参数具有明显的优越性,另外,由于用Snyder经验公式中二参数之间的作园无法准确求得斜率,且其不具有明确的物理意义,而由SDM-R二参数作图,不但能准确求得斜率j(与1mol溶剂和固相结合能有关的常数),而且j具有明确的物理意义并符合碳数规律,所以,参数j有可能用于RPLC中表征深剂强度,由此得出,在RPLC中,对同一置换剂面言,随同系物溶质的Z(1mol深剂化深质被深剂化固定相吸附时,从二接解面释放出的置换剂分子数)和logI(与1mol深质和固定相亲和势有关的常数)值增大,它们的保留时间也增大,对同一深质而言,随着在同系物置换剂中碳链的增长,Z和logI值的减小,它的保留时间也缩短,同时还可得出,随着同系物置换剂j值的减小,它们的洗脱能力也增强.     

反相高效液相色谱中溶质保留过程的热力学研究4: 焓熵补偿

依据液相色谱中溶质计量置换保留模型, 对溶质在反相液相色谱(RPLC)保留过程及其吸附、解吸附过程中的焓熵补偿进行了研究, 证实了在RPLC中焓熵补偿确实存在。从焓熵补偿的定义出发, 从理论上证明了溶质在保留过程中的焓熵补偿温度本质上为溶质保留值的收敛温度, 其数值为Z对1/T线性作图的斜率与截距之比。与惯常计算焓熵补偿温度的方法相比, 本文的方法所得补偿温度更为合理且不受流动相中强溶剂浓度变化的影响。     

Role of the water as a surface tension modifier for the retention of a series of dansylaminoacids on a beta-CD stationary phase

In reversed phase liquid chromatography (RPLC), using a surface tension treatment, the retention and separation of a series of d,l-dansylaminoacids were investigated with native beta-cyclodextrin as a chiral stationary phase. The enantioselectivity thermodynamic parameters were determined from linear van't Hoff plots. An analysis of the experimental variations in the retention factor with different fractions of water in the mobile phase was performed. The number of water molecules, n, excluded from the solute beta-cyclodextrin cavity interface when the analyte transfer occurred, was determined. Using these n values, the relative degrees of compound inclusion were calculated and correlated to both the steric bulkiness of the solute and the thermodynamic data.     

Preparation of pH-responsive stationary phase for reversed-phase liquid chromatography and hydrophilic interaction chromatography

Novel pH-responsive polymer-grafted silica was successfully synthesized through the radical "grafting from" polymerization on azo initiator-immobilized silica. The immobilization of azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4'-azobis(4-cyanovaleric acid chloride). The polymer-grafted silica was prepared by stirring suspension of the azo initiator-immobilized silica in anhydrous dioxane containing acrylic acid (AAc) and butyl acrylate (BA). The resulting polymer-grafted silica was demonstrated to be pH responsive to hydrophobic/hydrophilic property by reversed-phase liquid chromatography (RPLC) and hydrophilic interaction chromatography (HILIC). In RPLC mode, the retention of aromatic compounds decreased with the increase in the pH of mobile phase. However, the opposite result was obtained in HILIC mode; the retention of soybean isoflavones was stronger with the mobile phase at higher pH. Finally, the separations of sulfonamides and soybean isoflavones were carried out in RPLC mode and the separation of some nucleotides was achieved in HILIC mode.     

Retention mechanisms in micellar liquid chromatography

Micellar liquid chromatography (MLC) is a reversed-phase liquid chromatographic (RPLC) mode with mobile phases containing a surfactant (ionic or non-ionic) above its critical micellar concentration (CMC). In these conditions, the stationary phase is modified with an approximately constant amount of surfactant monomers, and the solubilising capability of the mobile phase is altered by the presence of micelles, giving rise to diverse interactions (hydrophobic, ionic and steric) with major implications in retention and selectivity. From its beginnings in 1980, the technique has evolved up to becoming a real alternative in some instances (and a complement in others) to classical RPLC with hydro-organic mixtures, owing to its peculiar features and unique advantages. This review is aimed to describe the retention mechanisms (i.e. solute interactions with both stationary and mobile phases) in an MLC system, revealed in diverse reports where the retention behaviour of solutes of different nature (ionic or neutral exhibiting a wide range of polarities) has been studied in a variety of conditions (with ionic and non-ionic surfactants, added salt and organic solvent, and varying pH). The theory is supported by several mechanistic models that describe satisfactorily the retention behaviour, and allow the measurement of the strength of solute-stationary phase and solute-micelle interactions. Suppression of silanol activity, steric effects in the packing pores, anti-binding behaviour, retention of ionisable compounds, compensating effect on polarity differences among solutes, and the contribution of the solvation parameter model to elucidate the interactions in MLC, are commented.     

An Extension and New Interpretation of Ościk's Equation for Describing Liquid Chromatography with Mixed Mobile Phases. II. Partition and Adsorption Effects

Abstract

Previously [J. Liquid Chromatogr. 8 (1985) 1363] it was shown that an equation having a form similar to O?cik's classical equation was derivable from a model involving solute partitioning (with no solute and solvent displacement) between a bulk-liquid mobile phase and a surface-influenced stationary liquid layer. Based on a recent general theory, we now propose a solute retention model which reveals an alternative molecular basis of O?cik's equation, which has been successfully applied to a range of liquid adsorption chromatographic systems. According to this model, solute is distributed between the     

计量置换参数Z值分量的测定(英文)

 以计量置换吸附理论(SDT A)为基础,从理论上推导出计量吸附模型中表征溶质对固定相亲合势大小的参数βa值与流动相中强置换剂浓度的对数呈线性关系。计量置换模型中的参数n和q(n和q分别代表1摩尔溶剂化溶质被吸附时,从吸附剂表面和从溶质分子表面所释放出的溶剂的物质的量)是计量置换参数Z值的分量,是两个非常有用的参数,可以从这个定量关系中直接获得。推导出的方程用苯的衍生物进行了实验验证,获得了较满意的结果。将这种方法计算得到的分量值与SDT A与计量置换保留模型(SDT R)相结合的方法得到的分量值进行了比较。     

Reversed phase HPLC coupled on-line to GC by the vaporizer/precolumn solvent split/gas discharge interface; analysis of phthalates in water

Reversed phase liquid chromatography (RPLC) was coupled on-line to gas chromatography (GC) via the vaporizer chamber/preco-lumn solvent split/gas discharge interface outlined recently. Water-containing eluents were driven into a vaporizer chamber at 300°C by the LC pump. The Vapors were removed through an early vapor exist by the carrier gas. Solvent/solute separation occurred in hte retaining precolumn. Special attention was paid to the parame-ters determining the losses of the most volatile compounds. The oven temperature during transfer was lowered close to the dew point of the eluent (the temperature at which recondensation occurs) in order to maximise the retention power of the retaining precolumn. The dew point depends on the transfer rate, the gas flow rate, and the gas inlet pressure. Sometimes even better retention of the vola-tiles was observed at temperatures below the dew point, i.e. despite partial reconsideration. The method was applied to the analysis of phthalates in drinking and surface waters. The detection limits, using MS, were 5–10 ng/l.     

Separation of imidacloprid and its degradation products using reversed phase liquid chromatography with water rich mobile phases

Water rich mobile phases in RPLC are not generally used because of the longer retention times involved when organic modifiers such as methanol or acetonitrile are used. The problem of longer retention times can be addressed using hydrophobic alcohols such as pentanol in low quantities (less than 1%) as organic modifiers. The advantages of using these mobile phases in RPLC for the separation of water soluble and weakly retained congeners is demonstrated through the separation of imidacloprid and its degradation products using a 0.4% pentanol in water mobile phase with 0.2% acetic acid.     

Transient cavities and the excess chemical potentials of hard-spheroid solutes in dipolar hard-sphere solvents

Monte Carlo computer simulations are used to study transient cavities and the solvation of hard-spheroid solutes in dipolar hard-sphere solvents. The probability distribution of spheroidal cavities in the solvent is shown to be well described by a Gaussian function, and the variations of fit parameters with cavity elongation and solvent properties are analyzed. The excess chemical potentials of hard-spheroid solutes with aspect ratios x in the range of 15< or =x< or =5, and with volumes between 1 and 20 times that of a solvent molecule, are presented. It is shown that for a given molecular volume and solvent dipole moment (or temperature) a spherical solute has the lowest excess chemical potential and hence the highest solubility, while a prolate solute with aspect ratio x should be more soluble than an oblate solute with aspect ratio 1x. For a given solute molecule, the excess chemical potential increases with increasing temperature; this same trend can be observed in hydrophobic solvation. A scaled-particle theory based on the solvent equation of state and a fitted solute-solvent interfacial tension shows excellent agreement with the simulation results over the whole range of solute elongations and volumes considered. An information-theoretic model based on the solvent density and radial distribution function is less successful, being accurate only for small solute volumes and low solvent densities.     

The Significance of Metallophilic and Silanophilic Interactions is Reversed Phase Hplc

Abstract

The poor peak shape encountered for amines in reversed phase high performance liquid chromatography (RPLC) is widely recognized. In order to improve chromatographic efficiency, the mechanism of the broadening must be understood. In addition to the silanol groups on the support surface, raetal sites have been implicated as possible adsorption sites for amines.

We have investigated the relative role of metallophilic and silanophilic interactions in the non-ideal behavior of amines and proteins. Stainless steel frits appear to have a deleterious effect on column efficiency via both mechanical and chemical interactions. The use of stainless steel meshes or screens is recommended. The residual metal sites on the support material have been found to play an insignificant role in solute retention or peak broadening. Minimization of silanophilic interactions is therefore the key to increasing efficiency in the separation of basic amines.     

Retention mechanism of poly(ethylene oxide) in reversed-phase and normal-phase liquid chromatography

The retention behavior of low- and high-molecular-mass poly(ethylene oxide) (PEO) in reversed-phase (RP) and normal-phase (NP) liquid chromatography was investigated. In RPLC using a C18 bonded silica stationary phase and an acetonitrile-water mixture mobile phase, the sorption process of PEO to the stationary phase showed deltaH(o) > 0 and deltaS(o) > 0. Therefore, PEO retention in RPLC separation is an energetically unfavorable, entropy-driven process, which results in an increase of PEO retention as the temperature increases. In addition, at the enthalpy-entropy compensation point the elution volume of PEO was very different from the column void volume. These observations are quite different from the RPLC retention behavior of many organic polymers. The peculiar retention behavior of PEO in RPLC separation can be understood in terms of the hydrophobic interaction of this class of typical amphiphilic compounds with the non-polar stationary phase, on the one hand, and with the aqueous mobile phase, on the other. The entropy gain due to the release of the solvated water molecules from the PEO chain and the stationary phase is believed to be responsible for the entropy-driven separation process. On the other hand, in NPLC using an amino-bonded silica stationary phase and an acetonitrile-water mixture mobile phase, PEO showed normal enthalpy-driven retention behavior: deltaH(o) < 0 and deltaS(o) < 0, with the retention decreasing with increasing temperature and PEO eluting near the column void volume at the enthalpy-entropy compensation point. Therefore, high-resolution temperature gradient NPLC separation of high-molecular-mass PEO samples can be achieved with relative ease. The molecular mass distribution of high-molecular-mass PEO was found to be much narrower than that measured by size-exclusion chromatography.     

Effect of ionization and the nature of the mobile phase in quantitative structure-retention relationship studies

The octanol-water distribution constant, commonly called partition coefficient, Po/w, is a parameter often retained as a measure of the hydrophobicity of a molecule. log Po/w, for a given molecule, can be conveniently evaluated constructing correlation lines between standard retention factor logarithms (log k) in reversed-phase liquid chromatography (RPLC) and standard log Po/w values. Many compounds of pharmaceutical interest can be quite hydrophobic and have, simultaneously, basic nitrogen atoms or acidic sulfur containing groups in their structure. This renders them ionizable. The hydrophobicity of the molecular drug form (Po/w value) is completely different from its ionic form (log Po/w(+ or -) value). The actual hydrophobicity of such ionizable molecule depends on the pH. It can be represented by an apparent Papp value that takes into account the amount of compound in its molecular and ionic state combining the Po/w and Po/w(+ or -) values. In this work, log k in RPLC for ionizable as well as non-ionizable pharmaceutical compounds with different therapeutic properties (10 beta-blockers, seven tricyclic antidepressants (TA), eight steroids and 12 sulfonamides) were correlated with log Po/w. Similar correlations were done between log k and the corrected log Papp values at pH 3. Aqueous-organic mobile phases containing acetonitrile (conventional RPLC) and micellar-organic mobile phases (micellar liquid chromatography, MLC), prepared with the anionic surfactant sodium dodecyl sulfate and the organic solvents acetonitrile, propanol or pentanol, were also used to elute the compounds. All mobile phases were buffered at pH 3. Using conventional retention RPLC data, the correlation of log k with log Po/w, was satisfactory for steroids because they cannot ionize. For ionizable beta-blockers and TAs, the use of log Papp values improved the quality of the correlations, but yielded similar results for sulfonamides. In MLC, since an electrostatic interaction is added to hydrophobic forces, poorer correlations were obtained in all cases. The retention data obtained in RPLC also seems to correlate better with the biological activity of the drugs.     

New model of surface diffusion in reversed-phase liquid chromatography

A new model of surface diffusion in reversed-phase liquid chromatography (RPLC) was derived by assuming a correlation between surface and molecular diffusion. Analysis of surface diffusion data under different conditions of sample compounds, mobile and stationary phases, and temperature in RPLC systems validates this assumption and shows that surface diffusion should be regarded as a molecular diffusion restricted by the adsorptive interactions between the adsorbate molecule and the stationary phase surface. A surface-restricted molecular diffusion model was proposed as a first approximation for the mechanism of surface diffusion. The model is formulated according to the absolute rate theory. The activation energy of surface diffusion (Es) was quantitatively interpreted assuming that Es consists of the contributions of two processes, a hole-making and a jumping one. The former contribution is nearly equal to the activation energy of molecular diffusion and is correlated with the evaporative energy of the mobile phase solvent. The latter contribution is a fraction of the isosteric heat of adsorption. An appropriate explanation based on this new model of surface diffusion is provided for two contradictory results related to the relationship between retention equilibrium and surface diffusion in RPLC and to the surface diffusion coefficient for weakly retained sample compounds.     

Naphthyl methacrylate-phenylene diacrylate-based monolithic column for reversed-phase capillary electrochromatography via hydrophobic and π interactions

A neutral naphthyl methacrylate-phenylene diacrylate-based monolith (NPM) was introduced for RP-CEC of various neutral and charged solute probes via hydrophobic and π interactions. The NPM column was prepared by the in situ polymerization of naphthyl methacrylate as the functional monomer and 1,4-phenylene diacrylate (PDA) as the crosslinker in a ternary porogenic solvent containing cyclohexanol, dodecanol and water. The NPM column exhibited cathodal EOF despite the fact that it was devoid of any fixed charges. NPM exhibited stronger EOF than its counterpart naphthyl methacrylate monolith (NMM) made from the in situ polymerization of naphthyl methacrylate and trimethylolpropane trimethacrylate (TRIM). As for NMM, it is believed that the EOF arises from the adsorption of mobile phase ions onto the monolith surface. The higher EOF exhibited by NPM may be attributed to the acrylate nature of PDA as compared to the methacrylate nature of TRIM, and therefore PDA has a higher binding capacity for mobile phase ions due to its higher polarity than TRIM. The adsorption of mobile phase ions together with the additional π interactions offered by the aromatic rings of the NPM matrix modulated solute retention and separation selectivity. The applications of NPM were demonstrated by the separation of a wide range of small and large solutes including peptides, tryptic peptide maps and proteins.     

Retention of Ionized Solutes in Reversed-Phase High Performance Liquid Chromatography

Abstract

The mechanism of retention in reversed-phase high performance liquid chromatography is affected by both solute-eluent interactions and the nature of the stationary phase. The hydrophobic expulsion of ionized solutes plays a major role in affecting solute behavior in the water-rich range of hydroorganic eluents. In the water-lean range of eluent composition, there is little hydrophobic expulsion, and specific interactions between the solute and surface can be observed. The nature of the surface affects the retention of a variety of ionized species, both large cations and anions. Octadecylsilane (ODS) bonded phases can exhibit two different binding sites: one exhibiting a weak interaction and the second a strong specific interaction with a solute. Styrenedivinylbenzene polymeric surfaces exhibit the potential for weak dispersion interactions, and in addition pi-bonding interactions with a solute. A variety of solutes have been injected in a water: methanol eluent system in order to assess solute-surface effects on reversed-phase supports.     

Solvent–solute and solute–solute interactions from NMR in nematic phases

Abstract

The use of NMR spectroscopy of molecules oriented in liquid-crystalline media to study solvent–solute and solute–solute interactions in π-systems such as benzene–chloroform and in charge transfer complexes, for example pyridineiodine, is illustrated. Changes in molecular order and chemical shifts as a result of complexation are employed in such studies. The extraordinary symmetry of C₆₀ has also been investigated by using a mixture of liquid crystals of opposite diamagnetic anisotropies indicating, thereby, negligible solvent–solute/solute–solute interactions.