Sodium Coumarin 6-Sulfonate,A Fluorometric Ion-Pairing Reagent for Tertiary Amines. Application to the Determination of Chlorpheniramine Maleate

Abstract

A study of sodium coumarin 6-sulfonate as a fluorescent ionpair reagent indicated that it could be useful in the analysis of tertiary amines such as chlorpheniramine maleate. The physical properties of the coumarin sulfonate that make it suitable as a fluorescent ion-pair reagent for basic drugs are its high relative quantum yield (0.76) and its acidity (pKa of ?7.66). Methylene chloride containing 5% n?pentanol was used to extract the coumarinchlorpheniramine ion-pair from aqueous solution. It was found that a 10^?2 M coumarin concentration yielded a 92% recovery of chlorpheniramine at pH 5. Following phase separation, the coumarin species was completely ionized by the addition of tetrabuty1 ammonium hydroxide to the organic phase. After irradiation for 30 min using long wavelength ultraviolet light (365 nm), the fluorescence intensity of the sample was measured using excitation and emission wavelengths of 400 and 540 nm, respectively. Comparison of fluorescence data of spiked aqueous samples to that of a chlorpheniramine maleate standard curve performed concurrently gave drug concentration in the samples. The calibration curve was linear in the 50–1000 ng/ml range (0.13 ? 2.6 × 10 ^?6 M). The procedure allowed the determination of chlorpheniramine maleate with an accuracy of 4–6% and a precision of 2–6% RSD (relative standard deviation). The minimum detectable concentration of drug (S/N = 2) that can be assayed by this method is 50 ng/ml of the maleate salt (35.3 ng/ml of chlorpheniramine free base).     

New insights into the transitional behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside using variable temperature FTIR spectroscopy and X-ray diffraction

The liquid crystalline behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside, 1, has been characterised using X-ray diffraction and variable temperature Fourier transform infrared (FTIR spectroscopy). 1 exhibits a monotropic interdigitated smectic A phase consisting of bilayers in which the alkyl chains are overlapped. The crystal–isotropic transition is accompanied by a pronounced decrease in the strength of the hydrogen bonding network involving the sugar groups resulting in a marked change in the environment of the alkyl chains. The isotropic phase consists of disordered smectic-like domains stabilised via hydrogen bonding between the sugar groups. At the transition to the smectic A phase, a subtle change in hydrogen bonding is observed which is manifested by a change in the temperature dependence of the OH stretching peak position in the FTIR spectrum. On crystallisation, the strong hydrogen bonding network is re-established accompanied by a change in the conformational distribution of the alkyl chains. A model is proposed in which a combination of hydrogen bonding (enthalpic effects) and conformational arrangements (entropic effects) promotes initially the formation of smectic-like domains in the isotropic phase and subsequently stabilises the smectic A phase by inhibiting the microphase separation leading to the crystal phase.     

Biamperometric and Differential Pulse Polarographic Methods for the Assay of Nomifensine Maleate

Abstract

Biamperometric titration and differential pulse polarography (DPP) are described for the analysis of nomifensine maleate powder and commercial capsules (Merital^R -50 mg). The biamperometric method involved the titration in cold dil. HCl medium against 0.01 M - NaN0₂ and electrometric detection of end point. The mean percent recoveries obtained were 100.0 ± 0.87 and 99.2 ± 0.95 for the authentic powder and capsules, respectively. The DPP method was performed by measuring the peak current, i_P, obtained from the recorded differential polarogram under constant 50mV modulation amplitude. The peak current was measured at the peak potential of ? 1.02 V on the dropping mercury electrode (DME) versus Ag/AgCl/KCl (sat.) reference electrode at pH 5.0 (acetate buffer). A linear relationship between peak current and concentration was demonstrated in the range 3 to 30μg ml^?1. The mean percent recovery for the capsules was 103.1 ± 1.26.     

Development of Novel Stability-Indicating Method for the Determination of Dimethindene Maleate and Its Impurities

A novel and selective stability-indicating liquid chromatographic method has been developed and validated for the analysis of dimethindene maleate, the related substance 2-ethylpyridine, and three degradation products. Dimethindene maleate was subjected to forced degradation study by acid and basic hydrolysis, oxidation, and thermal decomposition. Three degradation products that were formed during the forced degradation study were separated from dimethindene using a Zorbax SB CN column (150 × 4.6 mm; 5 μm); cyanopropyl-bonded stationary phase was applied for the first time for the separation of dimethindene and its impurities. The proposed method was validated and was found suitable for quality control and stability tests of pharmaceuticals containing dimethindene maleate.

     

Simultaneous spectrophotometric and liquid chromatographic determination of dextromethorphan hydrobromide,phenylephrine hydrochloride,and carbinoxamine maleate in pharmaceutical preparations

Simultaneous determination of dextromethorphan hydrobromide (DEX), phenylephrine hydrochloride (PHEN), and carbinoxamine maleate (CAR) in pharmaceutical preparations was performed by using liquid chromatograpy (LC) and spectrophotometry. In LC, the separation was achieved on a C18 column and the optimal mobile phase for satisfactory separation in a gradient elution program was found to be acetonitrile-sodium perchlorate solution (5: 95, v/v) initially, then a linear gradient up to 60% acetonitrile in 8 min. In spectrophotometric method, a chemometric technique, principal component regression (PCR), was used. In the method, the absorbance data matrix corresponding to the concentration data matrix was obtained by the measurement of absorbances in their zero order spectra by Δλ = 1 nm in the 210–300 nm range. Then, the calibration was obtained by using this data matrix for the prediction of unknown concentrations of DEX, PHEN, and CAR in their ternary mixture. The methods proposed were validated and successfully applied to a pharmaceutical preparation, capsule, and the results were compared.     

Synthesis of Maleated Ionomers via Ring‐Opening Reaction of Epoxidized (Styrene‐Butadiene‐Styrene) Triblock Copolymer with Potassium Hydrogen Maleate and Study of their Properties

A novel method for synthesizing maleated ionomer of (styrene‐butadiene‐styrene) triblock copolymer (SBS) from epoxidized SBS was developed. The epoxidized SBS was prepared via epoxidation of SBS with performic acid formed in situ by 30% H₂O₂ and formic acid in cyclohexane in the presence of polyethylene glycol 600 as a phase transfer catalyst. The maleated ionomer was obtained by a ring‐opening reaction of the epoxidized SBS solution with an aqueous solution of potassium hydrogen maleate. The optimum conditions for the ring‐opening reaction and some properties of the ionomers were studied. It is necessary to use phase transfer catalyst, ring‐opening catalyst and a pH regulator (dipotassium maleate) for obtaining the epoxy group conversion over 90%. The product was characterized by FTIR spectrophotometry and transmission electron microcroscopy (TEM) to be an ionomer with domains of maleate ionic groups. With increasing ionic groups, the water absorbency and the dilute solution viscosity of the ionomer increase, whereas the oil absorbency decreases. The tensile strength and ultimate elongation of ionomers increase with ionic group content and are higher than those of the original SBS without using any ionic plasticizer, which is usually used with the sulfonated ionomer. The ionomers with 1.2–1.7 mmol ionic groups/g exhibit optimum mechanical properties and behave as thermoplastic elastomers. The ionomer can be used as a compatibilizer for the blends of SBS with oil resistant chlorohydrin rubber (CHR). Addition of 3 wt% ionomer to the blend can increase the tensile strength and ultimate elongation of the blend optimally. The compatibility of the blends enhanced by adding the ionomer was shown by scanning electron microscopy (SEM). The blend of equal weight of SBS and CHR compatibilized by the ionomer behaves as a toluene resistant thermoplastic elastomer.     

Melaminium maleate monohydrate

In the title compound, 2,4,6‐tri­amino‐1,3,5‐triazin‐1‐ium maleate monohydrate, C₃H₇N₆⁺·C₄H₃O₄⁻·H₂O, containing singly protonated melaminium residues, maleate(1−) anions and water mol­ecules, the components are linked by hydrogen bonds into a three‐dimensional framework structure. The melaminium residues are connected by two pairs of N—H⋯N hydrogen bonds into chains in the form of stacks, with a distance of 3.26 (1) Å between the triazine rings, clearly indicating π–π interactions. The maleate anion contains an intramolecular O—H⋯O hydrogen bond and the anions interact with the water mol­ecules via O—H⋯O hydrogen bonds, forming zigzag chains, also in the form of stacks, in which the almost‐planar maleate anions are separated by 3.26 (1) Å. The experimental geometries of the ions are compared with molecular‐orbital calculations of their gas‐phase geometries.     

The Analysis of Purines from Rabbit Kidney Preservation Media by High Pressure Liquid Chromatography

Abstract

This paper demonstrates the application of High Pressure Liquid Chromatography (H.P.L.C.) for the separation and measurement of purines from perfusates of rabbit kidneys preserved for transplantation. A μ-Bondapak C₁₈ reverse phase column at pH 4.5 was included in a convex gradient elution program to facilitate optimal resolution in minimum time. The eluent comprised dipotassium hydrogen phosphate (K₂HPO₄) buffer with a final concentration of 10% methanol. A possible application of this method is discussed in relation to viability prediction of kidneys stored for transplantation.     

Analysis of Pheniramine Naleate and Cblorpheniramine Maleate Via Their Fe (III) Cohplexes

Abstract

A new spectrophotoraetric method has been developed for the analysis of pheniramine maleate and chlorphenlramine maleste, based on their reaction with iron (III). Pheniramine maleate and ch lor pheniramine maleate were found to form a 2:1 complex with iron (III) with an average log. stability constant of 12.26 and 12.36, respectively. The iron (III) complexes of both drugs showed maximum absorption at 273 nm, at pH 5, with slopes equal to 0.710 and 0.898 for pheniramine maleate complex and chlorpheniramine maleate complex, respectively. The proposed method was used for the determination of pheniramine maleate and chlorpheniramine maleate in quantities ranging between 0.25 × 10^?4 M to 2.5 × 10^?4 M with mean percentage recoveries of 100.17 ± 1.09% and 100.00 ± 1.13% for both drugs, respectively. The results obtained were compared with that of the B.P. (1980) method.     

Syntheses of Potential Degradation Products of Phenylephrine in OTC Products

Compound 1 and 2 are potential major degradants in over the counter (OTC) products containing phenylephrine HCl and dexbrompheniramine maleate or chlorpheniramine maleate. Compound 2 matches the unknown peak in the solution of stressed active and excipient and thus was identified as the correct degradation product. Whether the degradation product is racemic or chiral is not known. This article describes synthesis of both compounds. Compound 2 will be useful as an analytical standard for quantitative analysis of the major degradant in OTC products of phenylephrine HCl and dexbrompheniramine maleate or chlorpheniramine maleate.     

New Validated Methods for the Simultaneous Determination of Two Multicomponent Mixtures Containing Guaiphenesin in Syrup by HPLC and Chemometrics‐Assisted UV‐Spectroscopy

Abstract

High pressure liquid chromatographic (HPLC) and spectrophotometric methods are developed for the determination of two multicomponent mixtures containing guaiphenesin, dextromethorphane hydrobromide, and sodium benzoate together with either phenylephrine hydrochloride, chlorpheniramine maleate, and butylparaben (mixture 1) or ephedrine hydrochloride and diphenhydramine hydrochloride (mixture 2). The HPLC method depended on using an ODS column with mobile phase consisting of acetonitrile ?10 mM potassium dihydrogen phosphate, pH 2.7 (40∶60 v/v) containing 5 mM heptane sulfonic acid sodium salt (for mix 1) and a cyanopropyl column with mobile phase consisting of acetonitrile ?12 mM ammonium acetate, pH 5 (40∶60 v/v) (for mix 2) and UV detection at 214 nm. The cyanopropyl column is much less hydrophobic, less sterically restricted to the penetration of bulky solute molecules into the stationary phase, and has weaker hydrogen‐bond acidity than the ODS column. So the cyanopropyl column is more suitable for separation of components of mix 2. The chemometric‐assisted spectrophotometric method with, principal component regression (PCR) and partial least squares (PLS‐1) was used. For the chemometric method a calibration set of the mixture consisting of each compound in each mixture was prepared in distilled water. The absorbance data in the UV spectra were measured in the spectral region (210–240 or 210–224 nm for mix 1 and mix 2, respectively, as this range provided the greatest amount of information about the two mixture components). The spectrophotometric method does not require a separation step. The proposed methods were successfully applied for the analysis of the two multicomponents combinations in laboratory‐prepared mixtures and in commercial syrups, and the results were compared with each other.     

Simultaneous Quantitative Determination of Codeine Phosphate,Chlorpheniramine Maleate Phenylephrine Hydrochloride and Acetaminophen in Pharmaceutical Dosage Forms Using Thin Layer Chromatography Densitometry

Abstract

A simple and specific method for the analysis of codeine phosphate, chlorpheniramine maleate, phenylephrine hydrochloride and acetaminophen in pharmaceutical dosage forms was developed. The procedure consists of direct application of diluted liquid dosage forms and the solutions of solid dosage forms on silica gel plates. The mobile phase for development consisted of n-butanol-methanol-toluene-water and acetic acid. The separated components were measured quantitatively by densitometry. Linearity, reproducibility and percentage recovery of active ingredients from dosage forms were calculated.     

Separation of abietane-type diterpenoids from Clerodendrum kaichianum Hsu by high-speed counter-current chromatography using stepwise elution

High-speed counter-current chromatography (HSCCC) was successfully used for the separation of abietane-type diterpenoids from the medicinal plant C. kaichianum, which were not separated in our previous study using preparative HPLC. The HSCCC separation employed the lower phases of n-hexane–ethyl acetate–methanol–water (HEMW) 4:5:4:5 and HEMW 4:5:5:4 as the mobile phase for stepwise elution while the upper phase of HEMW 4:5:4:5 was used as the stationary phase. HSCCC separation yielded 90.5 mg of compound 1(kaichianone A), 137.7 mg of compound 2 (kaichianone B), 125.0 mg of compound 3 (teuvincenone E), and 227.6 mg of compound 4 (taxusabietane A) with purities of 95.3%, 97.2%, 97.8%, and 98.6%, respectively, as determined by HPLC. Compounds 1–2 are two new abietane-type diterpenoids while Compounds 3–4 are known abietane-type diterpenoids, analyzed by ESIMS and NMR data. The results demonstrated that HSCCC can be an excellent alternative for other separation methods. The two new compounds showed significant cytotoxicity against ileocecal carcinoma HCT-8 and breast adenocarcinoma MCF-7 cells.     

Determination of Cefmenoxime in Human Serum by Ion-Pair Reverse-Phase High Performance Liquid Chromatography

Abstract

A highly reproducible ion-pair reverse-phase high performance liquid chromatographic assay for cefmenoxime in human serum has been developed. A simple sample cleanup procedure is employed. Cefoxitin is the internal standard and separation is achieved using a C-18 μ-Bondapak column. The mobile phase consists of 20% acetonitrile and 80% 0.05 M ammonium acetate buffer containing 0.005 M tetrabutylammonium hydrogen sulphate as the ion-pair agent. Samples are quantitated by UV detector at 254 nm and 0.02 aufs with an assay sensitivity of 0.625 μg/ml. The method has been successfully applied in a clinical setting.     

Ion-Pair RP-LC of Tegaserod Maleate and its Impurities in Pharmaceutical Formulations and in Dissolution Studies

A simple ion-pair reversed-phase high-performance liquid chromatographic (RP-HPLC) method has been developed for determination of tegaserod maleate and related impurities in tablet dosage forms. The mobile phase was 60:40 (v/v) acetonitrile-25 mmol L^?1 sodium dodecyl sulfate, adjusted to pH 2.6 with glacial acetic acid. A C18 column was used as stationary phase and UV detection was at 314 nm. The method was optimized and validated. Response was linearly dependent on concentration between 0.1 and 100 µg mL^?1 with a limit of quantification (LOQ) of 0.1 µg mL^?1 for tegaserod maleate (S/N = 10). Under optimum conditions, tegaserod maleate was successfully separated from related substances, including 5-methoxyindole-3-carboxaldehyde remaining after synthesis and other impurities possibly resulting from oxidization and decomposition. The excipients did not interfere with assay of tegaserod maleate in tablet dosage forms. It is suggested that the proposed method can be used for routine quality control and dosage-form assay of tegaserod maleate.     

First-Derivative Spectrophotometric Assay of Timolol Maleate in Ophthalmic Solutions

Abstract

This research reports the application of derivative spectrophotometry to the determination of timolol maleate in ophthalmic solutions. A systematic approach developed for optimisation of the derivative order, graphical measurements and instrumental conditions led to the adoption of first-order spectrophotometry as a method with suitable precision and selectivity for the determination of timolol maleate in ophthalmic solutions without previous treatment.     

1H NMR studies of solvent and substituent effects on strong intramolecular hydrogen bonds

Chemical shifts of H-bonded protons in tetrabutylammonium hydrogen maleate and 14-substituted picolinic acid N-oxides have been measured in a number of dry solvents, of different activity, in order to distinguish between symmetrical single minimum and asymmetrical hydrogen bonds. In tetrabutylammonium hydrogen maleate the resonance was observed at 20.70 ppm and its was independent of the nature of the solvent used. The chemical shift value of picolinic acid N-oxide varies with the solvent. These observations suggest that the hydrogen bond is symmetrical in tetrabutylammonium hydrogen maleate but that it is asymmetrical in picolinic acid N-oxide. The chemical shifts of substituted picolinic acid N-oxides were correlated with σ_p, σ_m and Δ_pK_a. The substituent and solvent effects are compared and the position of the intramolecular H-bonded protons in picolinic acid N-oxides are estimated and discussed.     

Bis(2‐aminopyridinium) maleate

Two cyclic eight‐membered hydrogen‐bonded rings exist in the title compound, 2C₅H₇N₂⁺·C₄H₂O₄²⁻, involving the 2‐amino­pyridinium and maleate ions. The dihedral angle between the two pyridinium rings hydrogen bonded to the maleate ion is 74.80 (4)°. The maleate anion lies on a twofold axis and is linked to the pyridinium cations by intermolecular N—H⃛O hydrogen bonds. The heterocycle is fully proton­ated, which enables amino–imino tautomerization.     

Preparation and Evaluation of P-tert-Butyl-calix[8]arene-bonded Silica Stationary Phase for High Performance Liquid Chromatography

ABSTRACT

A new p-fert-butyl-calix[8]arene-bonded silica gel stationary phase was synthesized through heterogeneous functionalisation of suspended porous silica. A characterization of its structure was carried out by using elemental analysis, FTIR and ¹³C solid state NMR spectroscopy. Chromatographic performance of the new packing material was investigated by employing polycyclic aromatic hydrocarbons (PAHs) as probes and using methanol-water as mobile phase. The investigations show that the new stationary phase behaves as a reversed phase stationary phase. The liquid chromatographic separation of PAHs solutes on the new bonded phase was compared with that on a p-tert-butyl-calix[4]arene-bonded silica stationary phase. The new p-tert-butyl-calix[8]arene-bonded phase exhibited higher retention and better separation selectivity, although the carbon content and coverage of the new packing material was lower than that of the p-tert-butyl-calix[4]arene bonded silica stationary phase. A possible retention mechanism for the new packing material was also proposed.     

RP-HPLC Method for the Simultaneous Estimation of Eight Cardiovascular Drugs

The present study describes a convenient method for the separation and simultaneous determination of eight drugs used in cardiovascular diseases, viz., atenolol (ATN), lisinopril (LISI), hydrochlorothiazide (HCTZ), enalapril maleate (ENA), amlodipine besylate (AMLO), losartan potassium (LOSA), valsartan (VAL) and atorvastatin calcium (ATOR) in pharmaceutical formulations. A ZORBAX Rx-C8 column (250 × 4.6 mm, 5 μm particle size) was used with mobile phase consisting of acetonitrile, 10 mM dipotassium hydrogen phosphate buffer (pH 2.2 adjusted with orthophosphoric acid) using a gradient program and quantitative evaluation was performed at 210 nm with a flow rate of 1.0 mL min^?1. Suitability of this method for the quantitative determination of the drugs was proved by validation in accordance with International Conference on Harmonization guidelines. The method is selective, precise, robust, accurate and can be used for routine analysis of 15 combination pharmaceutical formulations in quality control.