The separation by thin-layer chromatography of trace metals as their tetraphenylporphyrin chelates.

The tetraphenylporphyrin chelates of iron, cobalt, manganese, nickel, zinc, copper, rhodium lead, cadmium and mercury were prepared and their chromatographic behaviour investigated using four different adsorbents and eleven different solvent systems. Mixtures of lead, cadmium and mercury chelates exhibited isographic behaviour in all conditions; mixtures of the other metal chelates were adequately resolved on silica (MN Polygram Sil SHR) by the solvent system light petroleum (b.p. 80-100 degrees)-toluene-acetic acid-water (66:33:85:15, v/v, upper phase). The intense colours of the chelates permit their visual detection at levels of about 10(-10) moles; using the integrated ion-current mass spectrometric procedure, as little as 10(-14) moles of metal could be detected and assessed.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.     

Simultaneous determination of iron and copper ions by low-injection analysis with a multichannel photodiode-array detector

Iron(II) and copper(II) ions are determined simultaneously in a simple manifold by using a multichannel photodiode-array detector. 1-(2-Pyridlazo)-2-hydroxy-7-sulfonaphthalene (PAN-7S) is used as the sole chromogenic reagent. The absorbance at 550 nm is related to the PAN-7S chelates of iron(II) and copper(II)and that at 764 nm to the iron(II) chelate alone. Calibrations are linear over the range 0–8.0 x 10^?6 M for each metal. Interference from zinc is avoided by addition of nitrilotriacetic acid; nickel interferes. Appliation to the determination of iron and copper ions in blood serum is discussed.     

Chemical analysis of mixtures of some heavy metals by means of differential reaction rates of ligand substitution reactions

The simultaneous determination of some heavy metals in their mixtures is described. The method is based on the differential reaction rate of ligand substitution reactions involving ethyleneglycol bis(2-aminoethylether)N,N,N',N'-tetraacetic acid (EGTA) and 4-(2-pyridylazo)-resorcinol (PAR). Various combinations at the 10^-6M level of heavy metal ions such as manganese(II), iron(III), cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II), mercury(II) and lead(II) can be determined photometrically.     

Determination of transition metal ions in tobacco as their 2-(2-quinolinylazo)-5-dimethylaminophenol derivatives using reversed-phase liquid chromatography with UV-VIS detection

This paper reports the utilization of solid-phase extraction and the reversed-phase high-performance liquid chromatography for the determination of six important transition metal ions: iron, cobalt, nickel, copper, zinc and manganese in tobacco with 2-(2-quinolinylazo)-5-dimethylaminophenol (QADMAP) as chelating reagent. Iron, cobalt, nickel, copper, zinc and manganese ions react with QADMAP to form colored chelates in the medium of acetic acid-sodium acetate buffer solution (pH 4.0). These chelates can be enriched by solid-phase extraction with Waters Sep-Pak-C18 cartridge, and eluted the retained chelates from cartridge with tetrahydrofuran. The chelates were separated on a Waters Nova-Pak-C18 column (150x3.9 mm, 5 microm) by gradient elution with methanol (containing 0.5% of acetic acid) and 0.05 mol/l pH 4.0 acetic acid-sodium acetate buffer solution as mobile phase at a flow-rate of 0.5 ml/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 10, 12, 8, 13, 17 and 22 ng/l, respectively. This method had been applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in tobacco with good results.     

5-Methyl-7-nitroso-8-hydroxyquinoline and its sensitivity and selectivity towards certain metallic ions

5-Methyl-7-nitroso-8-hydroxyquinoline (5-methyl-7-nitroso-oxine), hitherto undescribed, has been prepared and tested for its sensitivity and selectivity towards various metallic ions at differing pH's. The metals tested include cadmium, ferrous and ferric iron, mercurous and mercuric mercury, lead, nickel, cobalt, thallous thallium, cerous and cerie cerium, copper, chromium, aluminium, zinc, magnesium, vanadium (as vanadate) and gallium. This reagent is comparatively “unsclective” in that it chelates with all the above metals under the conditions employed, and therefore closely follows the behaviour of the parent compound, 8-hydroxyquinoline (oxine). Its average sensitivity is somewhat greater than that of the parent compound, and it shows its greatest sensitivity with. divalent mercury.     

Study on Determination of Six Transition Metal Ions in Biological Samples by SPE and RP‐HPLC

This paper reports the utilization of solid phase extraction and the reversed‐phase high‐performance liquid chromatography (RP‐HPLC) for the determination of six transition metal ions (iron, cobalt, nickel, copper, zinc and manganese) in biological samples. The samples were digested by microwave digestion. The iron, cobalt, nickel, copper, zinc and manganese ions in the digested samples can react with 2‐(2‐quinolinylazo)‐5‐diethylaminophenol (QADEAP) to form colored chelates in pH 4.0 acetic acid‐sodium acetic buffer solutions and cetyl trimethylammonium bromide (CTMAB) medium. These chelates were enriched by solid phase extraction with C₁₈ cartridge. Then the chelates were separated on a Waters Nova‐Pak‐C₁₈ column (3.9 × 150 mm, 5 μm) by gradient elution with methanol (containing 0.5% of acetic acid and 0.1% of CTMAB) and 0.05 mol/L pH 4.0 acetic acid‐sodium acetic buffer solution (containing 0.1% of CTMAB) as mobile phase at a flow rate of 0.5 mL/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 3 ng/L, 4 ng/L, 2 ng/L, 4 ng/L, 8 ng/L, 10 ng/L, respectively. This method was applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in biological samples with good results.     

The simultaneous determination of copper and nickel by solvent extraction and gas-liquid chromatography with bis (acetylpivalylmethane) ethylenediimine as reagent

The copper(II), nickel(II) and palladium(II) chelates of the bridged β-ketoamine, bis(acetylpivalylmethane) ethylenediimine, are described. The copper and nickel complexes are readily extracted by cyclohexane at pH 8.0 from aqueous solution. The gas chromatographic separation of the copper and palladium, the nickel and palladium, and the copper and nickel chelates is reported on a silicone gum rubber phase (E-350) supported on Universal B at 285°C. Optimal conditions for the complete separation of copper and nickel are reported; the solvent extraction—gas chromatographic procedures are applied to the determination of the individual metal ions (limit of detection, 1 ng) and to the simultaneous determination of copper and nickel in solution and in alloy samples. A rapid method for the determination of copper in domestic water samples is also described.     

Liquid Anion Exchange Studies and Separation of Mercury

Abstract

A new method is developed for the extractive separation of mercury from associated elements. Mercury is quantitatively extracted from 0.5 M acetic acid solution by aliquat 336 S, which acts as a liquid anion exchanger. The metal ion from the organic phase is stripped with sodium hydroxide solution and determined in the aqueous phase complexometrically. The extracted species is [2(R₄N⁺), Hg(OAc)₄ ^?2]. A working procedure for the selective separation of mercury from zinc, cadmium, nickel, cobalt, copper, bismuth and manganese is described.     

Liquid chromatographic determination of cobalt(II), copper(II) and iron(II) using 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone as derivatizing reagent

The complexing reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) was examined for high performance liquid chromatographic (HPLC) separations of cobalt(II), copper(II) and iron(II) or cobalt(II), nickel(II), iron(II), copper(II) and mercury(II) as metal chelates on a Microsorb C-18, 5-mum column (150x4.6 mm i.d.) (Rainin Instruments Woburn, MA, USA). The complexes were eluted isocratically with methanol:acetonitrile:water containing sodium acetate and tetrabutyl ammonium bromide (TBA). UV detection was at 254 nm. The solvent extraction procedure was developed for simultaneous determination of the metals, with detection limits within 0.5-2.5 mug ml(-1) in the final solution. The method was applied for the determination of copper, cobalt and iron in pharmaceutical preparation.     

Simultaneous Determination of Tin,Nickel, Lead,Cadmium and Mercury in Tobacco and Tobacco Additives by Microwave Digestion and RP‐HPLC Followed by On‐Line Column Enrichment

A new method for the simultaneous determination of five heavy metal ions, tin, nickel, lead, cadmium and mercury ions as metal‐tetra‐(2‐aminophenyl)‐porphyrin (T₂APP) chelates was developed using reversed‐phase high performance liquid chromatography (RP‐HPLC) equipped with a photodiode array detector and combined with an on‐line enrichment technique. The tin, nickel, lead, cadmium and mercury ions were pre‐column derivatized with T₂APP to form color chelates. The Sn‐T₂APP, Ni‐T₂APP, Hg‐T₂APP, Cd‐T₂‐APP and Pb‐T₂APP chelates can be absorbed onto the front of the enrichment column when they are injected into the injector and sent to the enrichment column [Waters Xterra? RP₁₈(5μ, 3.9 × 20 mm)] with a buffer solution of 0.05 mol/L pyrrolidine‐acetic acid (pH = 10.0) as mobile phase. After the enrichment had finished, by switching the six‐port switching valves, the retained chelates were back‐flushed by mobile phase and traveling towards the analytical column. These chelates separation on the analytical column [Waters Xterra? RP₁₈ (5μ, 3.9 × 150 mm)] was satisfactory by gradient elution with methanol (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) and acetone (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) as mobile phase. The linearity range is 0.01?120 μg/L for each metal ion. The detection limits (S/N = 3) of tin, nickel, lead, cadmium and mercury are 4.0 ng/L, 3.5 ng/L, 2.5 ng/L, 3.0 ng/L and 3.0 ng/L, respectively. This method was applied to the determination of tin, nickel, lead, cadmium and mercury ions in tobacco and tobacco additives with good results.     

Application of 8-mercaptoquinoline (thiooxine) for the separation of microamounts of elements

The separation of elements by means of thiooxine is reviewed. The extraction ranges of the thiooxinates of manganese, iron, cobalt, copper, zinc and mercury, for metal contents of 10⁻⁷–10⁻⁹g, were determined using the radioactive tracer method. Solubility values in chloroform and distribution coefficients in the system chloroform-water were determined for mercury, zinc and iron thiooxinates. Polytetrafluoroethylene powder was used to eliminate chloroform traces from the aqueous phase.     

Ion paired chromatography of iron (II,III), nickel (II) and copper (II) as their 4,7-Diphenyl-1,10-phenanthroline chelates

A reversed phase ion-paired chromatographic method that can be used to determine trace amounts of iron (II,III), nickel (II) and copper (II) was developed and applied to the determination of iron (II) and iron (III) levels in natural water. The separation of these metal ions as their 4,7-diphenyl-1,10-phenanthroline (bathophenanthroline) chelates on an Inertsil ODS column was investigated by using acetonitrile-water (80/20, v/v) containing 0.06 M perchloric acid as mobile phase and diode array spectrophotometric detection at 250-650 nm. Chromatographic parameters such as composition of mobile phase and concentration of perchloric acid in mobile phase were optimized. The calibration graphs of iron (II), nickel (II) and copper (II) ions were linear (r > 0.991) in the concentration range 0-0.5, 0-2.0 and 0-4.0 mug ml(-1), respectively. The detection limit of iron (II), nickel (II) and copper (II) were 2.67, 5.42 and 18.2 ng ml(-1) with relative standard deviation (n = 5) of 3.11, 5.81 and 7.16% at a concentration level of 10 ng ml(-1) for iron (II) and nickel (II) and 25 ng ml(-1) for copper (II), respectively. The proposed method was applied to the determination of iron(II) and iron(III) in tap water and sea water samples without any interference from other common metal ions.     

Preconcentration and selective metal ion separation using chelating micelles

Chelating aggregates consisting of Triton X100 host micelles and hydrophobic derivatives of PAN have been examined as suitable candidates for preconcentration and selective separation of transition metal ions through micellar-enhanced ultrafiltration. The effective accumulation in the surfactant-rich retentate of nickel(II), copper(II), cobalt(II), manganese(II) and zinc(II), present at trace levels in aqueous samples, has been achieved by operating at pH ca. 6 with a ligand having a binding constant to the host micelles higher than 2000 l./mol. The efficient separation of micelle-bound metal chelates from unreactive ions has been assessed, together with the feasibility of selective enrichment and purification of the investigated metal ions present in mixtures through a multistage process.     

Spectrophotometric determination of nickel in biological samples using 1-azobenzene-3-(3-hydroxyl-2-pyridyl)-triazene

A new sensitive and selective chromogenic reagent, 1-azobenzene-3-(3-hydroxyl-2-pyridyl)-triazene (ABHPT), was synthesized. It has been found that ABHPT reacts with nickel(II) in a borax buffer solution (pH 10.0) to form 2: 1 red complexes with the maximum absorption at 530 nm. The apparent molar absorptivity of the complex is 2.6 × 10⁵ L/(mol cm). Most metal ions can be tolerated in considerable amounts, whereby only zinc and mercury may interfere with the determination of nickel(II). Nevertheless, this can be easily eliminated by prior separation with sulfhydryl dextran gel. A new method for the spectrophotometric determination of trace nickel(II) was developed. Beer’s law is obeyed for 0–15 μg of nickel(II) in 25 mL of solution. The limit of quantification, limit of detection, and relative standard deviation are 0.74 ng/mL, 0.25 ng/mL, and 1.0%, respectively. The method has been applied to the determination of trace nickel(II) in biological samples with satisfactory results. The text was submitted by the authors in English.     

Selectively Enhanced Retention of Neutral Iron(II) Complex in RP-LC with o-Hydroxy Pyrimidylazo Compounds as Precolumn Derivatizing Reagent

The diazo component of o-hydroxy heterocyclic azo compounds showed a remarkable effect on the retention of their neutral complexes of iron and nickel as a precolumn derivatizing reagent in the separation of metal ions by RP-HPLC using an octadecyl-bonded silica gel column. High resolutions of iron and nickel complexes were obtained with pyrimidyl derivatives. Acetonitrile-water or acetone-water was more suitable as a mobile phase than alcohol-water with regard to the separation of these metal ions. Thermodynamic study showed that the difference in transfer enthalpies of iron and nickel complexes from the mobile phase to the stationary phase dominated the resolution of two complexes with pyrimidyl compounds. High resolutions obtained by use of pyrimidyl compounds were ascribed to selectively enhanced retention of the iron complexes from the comparison with the retentions of the zinc complexes.     

Transition metal complexes derived from 2-iminocyclohexanedithiocarboxylic acid

Summary The ligating properties of 2-iminocyclohexanedithiocarboxylic acid were investigated. Complexes with halides of manganese(II), iron(II), cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and mercury(II) were synthesized and characterized by elemental analysis, magnetic measurements, electron and i.r.¹H n.m.r. spectral studies. The results are concordant with a bidentate coordination of the—CS₂ group to the metal ions.     

Metal chelates of phosphonate-containing ligands-III Analytical applications of N,N,N',N'-ethylenediaminetetra(methylenephosphonic) acid

N,N*,N',N'-Ethylenediaminetetra(methylenephosphonic) acid is used as a titrant for the direct determination of Cu, Co and Ni, with murexide as indicator. Indirect titrimetric procedures are suggested for the determination of silver, mercury, zinc and cyanide and both direct and indirect methods are applied for the analysis of binary mixtures of silver (or mercury) and copper (cobalt or nickel). The stoichiometry of the reaction, interferences of some metal ions and the pH effects on the complexation reactions are discussed. The values of the equilibrium constants of the protonated CuH(n)L (n = 1, 2, 3 and 4) as well as the unprotonated CuL chelates have been measured.     

Simultaneous determination of traces of iron, cobalt, nickel, copper, mercury and lead in water by energy-dispersive x-ray fluorescence spectrometry after preconcentration as their piperazino-1,4-bis(dithiocarbamate) complexes

A bidentate chelating agent has been proposed to preconcentrate seven metal ions dissolved in an aqueous sample for their simultaneous determination using energy-dispersive x-ray fluorescence spectrometry. The metal ions are precipitated as their polymeric piperazino-1,4-bis(dithiocarbamate) chelates, which are then collected by vacuum filtration on a Millipore membrane filter for direct examination by x-ray fluorescence analysis. Iron, cobalt, nickel, copper and zinc are determined by means of their K x-rays and mercury and lead by means of their L x-rays. A detection limit in the μg1⁻¹ range can be achieved for all metals tested in 250-ml water samples with a counting time of 600 s. Effective precipitation of all metals occurs at pH 6–7. The recoveries of eight analyses of the metals in a multielement standard using the proposed method ranged from 97 to 105% and the precision ranged from 2.3 to 3.1%. High concentrations of calcium and magnesium do not interfere with the method. The method is simple, sensitive and accurate, and has been used for the simultaneous determination of the seven metals under study in environmental samples and synthetic mixtures.     

Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.