Characterization of Amino-, Cyano-alkyl Bonded Silica Columns in Normal-Phase Liquid Chromatography by Using Steroids

Abstract

In order to characterize the chemically bonded phases in HPLC analysis, the retention behavior of fifteen steroids including estrogen, androgen, progestogen and corticoid were systematically examined using dioxan as the stronger component in an n-hexane-binary system. A linear relationship between the logarithm of the capacity ratio and logarithm of the molar concentration of the binary solvent was confirmed for amino- and cyano-type bonded as well as non-bonded silica gel columns. Based on the retention indices of these phases, the retentivity of the packing materials was determined as follows: the amino-type is similar to and the cyano-type is weaker (0.7 times) than bare silica gel when using dioxan as the stronger component. The specific retentivity of an amino column for polar steroids containing phenolic and alcoholic hydroxyl groups suggests a molecular interaction associated with hydrogen bonding between the polar packing surface and solute compounds. The selectivity of amino packing was found to be larger than cyano packing whose retention selectivity is similar to a bare silica gel.     

Effect of Alkyl Chain Length of Bonded Silica Phases on Separation,Resolution and Efficiency in High Performance Liquid Chromatography

Abstract

A comparative study of alkyl bonded phases was carried out under optimum solvent conditions for each phase. Three columns, RP-2, RP-8 and RP-18, were tested for their efficiency and resolving power using three groups of compounds in three binary organic-water mobile phases. The organic solvents were acetonitrile, methanol and tetrahydrofuran which are widely used as solvent modifiers.

The results indicate that each of the three factors, i.e. solvent, solute and bonded alkyl chain length, play an important role, with the solvent being the most significant. When tetrahydrofuran-water was used as the mobile phase, the ratio of THF/H₂O did not vary by much when an RP-2, RP-8 or RP-18 column was used to separate naphthalene from biphenyl, dimethylphthalate from diethylphthalate or anthraquinone from methyl, anthraquinone and ethyl anthraquinone. When acetonitrile-water and methanol-water were used the ratio of organic modefier to water changed so as to accomodate the hydrophobic properties of the columns. The efficiency of the columns, expressed as theoretical plates per meter (TPM) was highest when acetonitrile-water was used as the mobile phase. Although there were variations in TPM and resolution from column to column, the three columns gave good separation of the components of the three groups of compounds.     

Turbidimetric titration and gradient high-performance liquid chromatography of polystyrene samples

Summary Polystyrene samples of narrow molecular-weight distribution have been eluted according to their molecular weight from columns packed with bare silica Si50, phenyl, or C18 bonded phase by gradients of methanol and tetrahydrofuran (THF) or ofiso-octane and THF. Among the six combinations investigated,iso-octane/THF with a silica column formed a proper normal-phase system whereas methanol/THF with a C18 column formed a proper reversed-phase system. The combinations of C18 column andiso-octane/THF or of Si50 column and methanol/THF gradient did not correspond to the approved polarity rules in high-performance liquid chromatography but were nevertheless effective in separating polystyrene mixtures by molecular weight. Methanol andiso-octane are nonsolvents for polystyrene whereas THF is a solvent. The solubility of polystyrene as a function of molecular weight and concentration was determined by means of turbidimetric titration of solutions in THF with the nonsolvents used in the gradients. The solubility and elution characteristics were almost identical on C18 columns or in methanol/THF combinations. The elution from phenyl bonded phase and Si50 columns usingiso-octane/THF gradients required more THF than the solubility experiments. Information is also given on the occurrence of multimodal elution patterns.     

Characterization of Column Packings in Normal-Phase Liquid Chromatography. I. Retention Behavior of Fat-Soluble Vitamins in Silica Gel-Binary Solvent Systems

Abstract

To characterize packing columns in high performance liquid chromatography, the retention indices of ten fat-soluble vitamins were systematically measured using binary solvents each containing ethyl acetate, tetrahydrofuran and 2-propanol in n-hexane for silica gel chromatography. A linear relationship between the logarithm of the capacity ratio and that of the concentration of the polar solvents was confirmed. The retention sequence of the solutes was determined as follows: retinol > ergocalciferol = cholecalciferol > δ- > γ- > β- > α - tocopherol > menadione > phylloquinone. The retention behavior of retinal was similar to that of tocopherol derivatives, but varied depending on the polar solvent used. Such a retention sequence of fat-soluble vitamins may be explained on the basis of hydrogen bonding interactions between the active functional group on the solute molecules and silanol groups on the silica gel surface. Based on the adsorption selectivity given by the phase systems used, the resolution of each class of vitamins but not that of vitamin D homologues was successfully carried out.     

Liquid Chromatographic Characteristics of Ethylenethiourea with HPLC Carbon,Chiral, Polymer and Reverse-Phase Bonded Silica Columns

Abstract

Of the columns investigated, the graphitised carbon column provided the best chromatographic characteristics for the highly water-soluble compound ethylenethiourea (ETU). The stability of the carbon column in strongly acidic media permitted the incorporation of the phosphoric acid electrolyte into the 5% acetonitrile-in-water mobile phase. ETU eluted from the column in 200 s as a sharp symmetrical peak at a mobile phase flow rate of 1 mL/min and a column temperature of 35°C. The k' value was 1.72. ETU peak retention times and responses showed excellent repeatability with coefficients of variation of 0.28 and 1.40%, respectively, for 6 replicates with the high performance liquid chromatographic-electrochemical system using the graphitised carbon column. Although ETU eluted as a sharp symmetrical peak with the cyclodextrin chiral columns, their instability at low pH required post-column addition of the phosphoric acid electrolyte solution. ETU chromatographed poorly or degraded on the polymer columns. The chromatographic separation of ETU on the C-8 reverse-phase bonded silica column appeared to be due mainly to residual silanol groups. With the NH₂ bonded silica column ETU eluted immediately after the injection solvent.     

Enhancement of retentivity and selectivity for PAHs in NP-HPLC by high-density immobilization of poly(4-vinylpyridine) as an organic phase on silica.

Poly(4-vinylpyridine)-modified silica with high grafting density have been prepared by a grafting-from (g-from) approach through radical chain-transfer reactions. The widely used silane coupling agent 3-mercaptopropyltrimethoxysilane was used to prepare thiol-terminated silica. Chain-transfer reaction and polymerization of 4-vinylpyridine was carried out using alpha,alpha'-azobisisobutyronitrile as an initiator. Thiol-terminated silica and polymer-modified silica were both characterized qualitatively and quantitatively. The quantification of the organic phase has been done by thermogravimetric analysis and elemental analysis. Thus, the modified silica was used as a packing material and the retention behavior of polycyclic aromatic hydrocarbons (PAHs) was studied in normal-phase high-performance liquid chromatography. Results were compared with those of poly(4-vinylpyridine)-modified silica prepared by a grafting-to (g-to) approach. Commercially available aminopropyl-bonded silica and bare silica columns were also used as reference columns. The column of poly(4-vinylpyridine)-grafted silica prepared by the g-from method, having higher grafting density, provided the better retentivity and selectivity for PAHs compared to the other reference columns.     

Study of solvation processes on cholesterol bonded phases

Four cholesterol bonded phases with different structures were investigated. The columns studied were packed with stationary phase containing cholesterol attached to the silica surface using different types of linkage molecules. The presence of the polar amino and carboxyl groups in the structure of the bonded ligand strongly influence on the solvation process. The possibility of hydrogen bonding, dipole-dipole and π-π electron interactions lead to preferential solvation of bonded ligands. The coverage density of bonded ligands and length of the linkage strongly influence the adsorption of solvent from the mobile phase. The removal of residual silanols during the hydrosilation procedure significantly influences solvation of the bonded phase. Excess isotherms of the commonly used solvents in RP HPLC (methanol and acetonitrile) were obtained using the minor disturbance method. For comparison of the stationary phases prepared on different silica gels the excess adsorbed amounts were calculated per volume of the stationary phase in the column. The hydrosilated UDC Cholesterol bonded phase is preferentially solvated by methanol whereas the highest coverage Cosmosil Cholester phase exhibit high adsorption of acetonitrile. Polar groups in the Amino-cholesterol type bonded phase are solvated with both solvent but the mechanisms of these processes are different.     

Impact of pore structural parameters on column performance and resolution of reversed-phase monolithic silica columns for peptides and proteins

In this work, monolithic silica columns with the C4, C8, and C18 chemistry and having various macropore diameters and two different mesopore diameters are studied to access the differences in the column efficiency under isocratic elution conditions and the resolution of selected peptide pairs under reversed-phase gradient elution conditions for the separation of peptides and proteins. The columns with the pore structural characteristics that provided the most efficient separations are then employed to optimize the conditions of a gradient separation of a model mixture of peptides and proteins based on surface chemistry, gradient time, volumetric flow rate, and acetonitrile concentration. Both the mesopore and macropore diameters of the monolithic column are decisive for the column efficiency. As the diameter of the through-pores decreases, the column efficiency increases. The large set of mesopores studied with a nominal diameter of approximately 25 nm provided the most efficient column performance. The efficiency of the monolithic silica columns increase with decreasing n-alkyl chain length in the sequence of C18相似文献   

Separations in Thin Layer and High Performance Liquid Chromatography Using Alkyl Silica Gel Bonded Phases

Abstract

Separations in thin layer (TLC) and high performance liquid chromatography (HPLC) using alkyl bonded phases were carried out under optimum solvent conditions for each of three phases, RP-2, RP-8 and RP-18. The phases were tested for their efficiency and resolving power using three groups of compounds in three binary organic-water mobile phases. The organic solvents were acetonitrile, methanol and tetrahydrofuran, which are widely used as solvent modifiers in reversed phase liquid chromatography.

The results showed that, unlike HPLC, TLC using RP-18 plates was the most, and RP-2 plates the least, efficient. A naphthalene and biphenyl mixture which was resolved by HPLC using any of the three solvents and columns was not resolved by TLC using any plate or solvent combination, unless the plate was prewashed with an organic modifier. The addition of NaCl (1–2% wt/vol) to the solvent for TLC speeded development unless an alcohol was used, but did not greatly affect the separation.     

Relative Strength of Stronger Solvents for Silica,Amino- and Cyano-alkyl Bonded Silica Columns in Normal-Phase Liquid Chromatography

Abstract

The strength and selectivity of solvents such as ethyl acetate, dioxan and ethyl alcohol in n-hexane binaries were determined using steroids as solutes in normal-phase liquid chromatography of silica gel, amino- and cyano-propyl silica columns. Based on the linear relationship between the logarithm of the capacity ratio and logarithm of solvent composition, the relative strength of solvents was determined from the experimental retention data described in our earlier articles. A micro-computer data base was compiled for filing the retention behavior of the steroids. Using this computer data base, the optimization process of binary solvents for a given sample was improved. An example of the phase system design is described.     

HPLC separation of isomers of tetrahydro-1,5-benzothiazepines and tetrahydro-1,5-benzodiazepines

Summary Separation of positional and cis-trans-isomers of tetrahydro-1,5-benzothiazepines and tetrahydro-1,5-benzodiazepines was studied using reversed-phase chromatography and liquid-solid chromatography. The selection of solvent was based on the selective triangle for solvents. Systems of separation consisted of C₁₈ columns and methanol, THF or acetonitrile in water for the reversedphase method; it was suitable for the separation of positional isomers only but the liquid-solid method was suitable for separation of cis-trans-isomers as well as positional isomers using a silica column and ethyl ether, chloroform or ethyl acetate as the mobile phase respectively.     

Investigating retention characteristics of a mixed‐mode stationary phase and the enhancement of monolith selectivity for high‐performance liquid chromatography

The synthesis and chromatographic behavior of an analytical size mixed‐mode bonded silica monolith was investigated. The monolith was functionalized by an in situ modification process of a bare silica rod with chloro(3‐cyanopropyl)dimethyl silane and chlorodimethyl propyl phenyl silane solutions. These ligands were selected in order to combine both resonance and nonresonance π‐type bonding within a single separation environment. Selectivity studies were undertaken using n‐alkyl benzenes and polycyclic aromatic hydrocarbons in aqueous methanol and acetonitrile mobile phases to assess the methylene and aromatic selectivities of the column. The results fit with the linear solvent strength theory suggesting excellent selectivity of the column was achieved. Comparison studies were performed on monolithic columns that were functionalized separately with cyano and phenyl ligands, suggesting highly conjugated molecules were able to successfully exploit both of the π‐type selectivities afforded by the two different ligands on the mixed‐mode column.     

Design of Binary Solvent Systems for Separation of Protected Oligo-Peptides in Silica Gel Liquid Chromatography

Abstract

In order to adjust the binary mobile phase for the separation of protected oligo-peptides, a systematic investigation of the retention behaviour on silica gel columns was carried out using seven peptide derivatives. Quantitative correlation between the capacity ratios of solvent systems using various concentrations of the stronger eluent was determined. The strengths and selectivities of fourteen binary systems were discussed on the basis of their retention indices. The design of equi-eluotropic binary systems containing these stronger components is presented.     

Life-time studies with capillary electrochromatography columns operated under different conditions

A test system has been established to permit the monitoring of the life-time performance of several reversed- phase capillary electrochromatography (CEC) columns. The retention factors, k(cec), peak symmetry coefficients, lambda(sym), and column efficiencies, N, of three neutral n-alkylbenzene analytes, namely ethyl-, n-butyl- and n-pentylbenzenes, were determined for Hypersil 3 microm n-octylsilica and n-octadecylsilica packed into CEC capillary columns of 100 microm I.D., with a packed length of 250 mm, and a total length of 335 mm. The performances of these CEC capillary columns were examined for a variety of eluents with pH values ranging between pH 2.0 - 8.0, similar to those employed to study the retention behaviour of peptides that we have previously reported. The relative standard deviation (RSD) of the retention factors (k(cec) values) of these n-alkylbenzenes, acquired with an eluent of (25 mM Tris-HCl, pH 8.0,)-acetonitrile (1:4, v/v), when the CEC capillary columns were used for the first time (virgin values), were 4% (based on data acquired with 4 CEC capillary columns) for the n-octyl bonded silica capillary columns, and 6% (based on 8 columns) for n-octadecyl bonded silica capillary columns. The RSD values of the k(cec) values of the n-alkylbenzenes for one set of replicates (n=6) with one CEC capillary column was < 0.5%. The theoretical plate numbers, N, for the virgin CEC capillary columns were ca. 60,000, whilst the observed N values for all new CEC capillary columns were > or = 40,000 for n-octyl bonded silica capillary columns and > or = 50,000 for n-octadecyl bonded silica capillary columns. The peak symmetry coefficients, lambda(sym), of the n-alkylbenzenes for virgin CEC capillary columns and for CEC capillary columns used for more than 1,000 injections were always in the range 0.95-1.05. The experimental results clearly document that the life-time performance of the CEC capillary columns depends on the eluent composition, as well as the nature of the analytes to which the CEC capillary columns are exposed.     

Studies on high-performance size-exclusion chromatography of synthetic polymers. I. Volume of silica gel column packing pores reduced by retained macromolecules

Macromolecules, which stay adsorbed within the active size-exclusion chromatography (SEC) column packings may strongly reduce effective volume of the separation pores. This brings about a decrease of retention volumes of the non-retained polymer samples and results in the increased apparent molar mass values. The phenomenon has been demonstrated with a series of poly(methyl methacrylate)s (PMMA) and a polyethylenoxide (PEO) fully retained by adsorption within macroporous silica gel SEC column from toluene or tetrahydrofuran, respectively. The non-retained probes were polystyrenes (PS) in toluene and both PS and PMMA in THF eluents. The errors in the peak molar mass values determined for the non-retained polymer species using a column saturated with adsorbed macromolecules and considering calibration curves monitored for the original "bare" column packing assumed up to several hundreds of percent. Errors may appear also in the weight and number averages of molar masses calculated from calibration dependences obtained with columns saturated with adsorbed macromolecules. Moreover, the SEC peaks of species eluted from the polymer saturated columns were broadened and in some cases even split. These results demonstrate a necessity not only to periodically re-calibrate the SEC columns but also to remove macromolecules adsorbed within packing in the course of analyses.     

Comparison of column properties in reversed-phase chromatography: monolithic, cholesterolic and mixed bonded stationary phases

A commercial Chromolith C18 column and two new stationary phases with mixed ligands bonded on the Kromasil silica gel support, SG-MIX and SG-Chol, were characterized using simple tests based on the retention of non-polar, basic and acidic compounds. Polar and methylene selectivity tests in acetonitrile-water and methanol-water mobile phases revealed lower hydrophobicities of the SG-MIX and SG-Chol columns in comparison to the Chromolith column. The columns were further characterized using new test criteria - gradient oligomer capacity and isomeric selectivity and peak symmetry of naphthalene di-sulphonic acids in aqueous mobile phases. The cholesterolic column shows greater gradient oligomer selectivity for the separation of oligoethylene glycol samples than the SG-MIX and the Chromolith columns. Increased retention and peak tailing, but decreased isomeric selectivity for naphthalene-di-sulphonic acids was observed with the SG-MIX column, because of interactions with various polar bonded groups.     

Preparative Hydrophobic Interaction Chromatography of Proteins Using Ether Based Chemically Bonded Phases

Abstract

This paper examines the use of 15–20 micron wide-pore silica-based ether bonded phases for the preparative hydrophobic interaction chromatography of proteins. In particular, silyl ethers are immobilized on large particle silica in an analogous manner to previously developed ether bonded 5 um analytical supports. The preparative supports are reproducibly prepared and exhibit constant chromatographic retention for at least five months of continual use. Preparative columns can be operated for protein chromatography with peak shapes and capacity as predicted by the Snyder gradient elution model. Moreover, similar retention times are obtained relative to those on the 5 um analytical columns, enabling the direct transition and scale-up of separation. Gradient optimization is seen to directly parallel that performed on 5 um bonded ether analytical columns. Acceptable chromatographic resolution was obtained with sample capacity of >15 mg protein/ml column volume using a repetitive injection technique. A column clean-up strategy is examined for rapid and safe removal of contaminants. An illustrative example of use of the bonded ether preparative columns is made by application to soybean trypsin inhibitor purification. Initial results are presented on a column-switching method for the analytical monitoring of preparative separation.     

Optimization of binary porogen solvent composition for preparation of butyl methacrylate monoliths in capillary liquid chromatography

Butyl methacrylate monolithic columns in 320 microm i.d. fused silica capillaries for reversed-phase capillary liquid chromatography were prepared by radical polymerization initiated thermally with azobisisobutyronitrile (AIBN). Polymerization mixture contained butyl methacrylate (BMA) as the function monomer and ethylene dimethacrylate (EDMA) as the crosslinking agent with 1,4-butanediol and 1-propanol as a binary porogen solvent. Ratio of 1,4-butanediol to 1-propanol in the porogen solvent was optimized regarding the monolithic column efficiency and performance. Total porosity, column permeability, separation impedance, Walters hydrophobicity index, retention factors, peak asymmetry factors, height equivalents to a theoretical plate and peak resolutions were used for characterization of the prepared monolithic columns. The polymerization mixture consisting of 17.8% of BMA, 21.8% of EDMA, 18.0% of 1,4-butanediol, 42.0% of 1-propanol and 0.4% AIBN generated monolithic columns of the best performance having a sufficient permeability and the lowest separation impedance. It was also demonstrated that monolithic columns of this composition exhibited good preparation reproducibility and an excellent pressure resistance when applied in capillary liquid chromatography.     

用C60键合硅胶固定相液相色谱分离杯芳烃及杯芳冠醚类化合物

以自合成的C60 键合硅胶液相色谱固定相 ,分别选用3种不同选择性的流动相体系 :异丙醇 -环己烷 ,氯仿 -环己烷和二氯甲烷 -环己烷 ,考察了流动相组成对杯芳烃及杯芳冠醚化合物保留行为和分离选择性的影响。在一定的流动相条件下溶质能得到较好分离。     

Effect of high-temperature on high-performance liquid chromatography column stability and performance under temperature-programmed conditions

Six commercially available analytical (4.1 or 4.6 mm i.d.) columns were evaluated under temperature-programmed high-temperature liquid chromatography (HTLC) conditions to access their stability and performance at extreme temperatures. Seven components consisting of acidic, basic and neutral compounds were analyzed under temperature-programmed conditions and solvent gradient conditions using three different mobile phase compositions (acidic, basic and neutral). Each column was checked with a two-component test mix at various stages of the evaluation to look for signs of stationary phase collapse. Three zirconia based stationary phases studied exhibited column bleed under temperature-programmed conditions. The other three columns, a polydentate silica column, a polystyrene-divinylbenzene (PS-DVB) polymeric column, and a graphitic carbon column performed well with no evidence of stationary phase degradation. The R.S.D. for the retention times and efficiencies were less than 10% for most conditions, and not more than 15% during the course of the evaluation for each column. The polydentate silica stationary phase was temperature programmed to 100 degrees C, the PS-DVB stationary phase was temperature programmed up to 150 degrees C, and the graphitic carbon column was used with temperature programming up to 200 degrees C. Comparable peak capacities and similar retention behaviors were observed under solvent gradient and temperature-programmed conditions. Temperature programming with dynamic mobile phase preheating can replace solvent gradient analysis without a loss of peak capacity when used with 4.1 or 4.6 mm columns.