Calibration of Separation and Instrumental Peak Broadening in Sec Coupled with Light Scattering of Simple Polymers

Abstract

A recently developed procedure for calibration of separation and instrumental peak broadening in SEC was used for a comparative study of separation and axial dispersion of polystyrene, poly(methyl methacrylate) and poly(vinylchloride). The influence of the uncertainty in the volume lag between the concentration and LALLS detectors upon peak broadening was investigated and a new procedure for the determination of the lag was proposed. The applicability of the universal calibration concept was tested; all the polymers have been found to match a single universal calibration function. Polystyrene and poly(methyl methacrylate) also coincided very well with respect to the instrumental spreading, but for poly(vinylchloride) spreading was found to be a function of polymer concentration.     

Characterization of Nonionic Polyacrylamides by Aqueous Size Exclusion Chromatography Using a DRI/LALLSP Detector System

Abstract

Herein is reported an experimental investigation of the molecular weight characterization of nonionic polyacrylamides by aqueous SEC with a DRI/LALLSP detector system. Methodology for the use of the DRI/LALLSP detector responses to determine the molecular weight calibration curve and the peak broadening parameter, [sgrave]² (variance of a Gaussian instrumental spreading function) over a wide molecular weight range has been developed. The method is based on the use of a broad MWD standard made by blending Polysciences broad MWD standards and a generalized analytical solution of Tung's integral equation for the detector response corrected for peak broadening. Molecular weight averages measured by SEC/DRI/LALLSP are in excellent agreement with those measured offline by LALLSP.     

Influence of peak-broadening and interdetector volume error on size-exclusive chromatographic analysis with dual viscometric-concentration detection using the universal calibration method

The effect of peak-broadening and error in interdetector volume on the local calibration curve and experimental molecular-mass averages obtained by size-exclusion chromatography (SEC) with dual concentration/viscosity detection, and determination of molecular mass using the universal calibration (UC) method, is theoretically examined using a polymer sample with a molecular-mass distribution (MMD) approximated by the log-normal function. Although peak-broadening is often neglected, its effect on the slope of the local calibration curve and, consequently, on the experimentally obtained values of the weight-to-number average ratio is large. To obtain the right values of these parameters, a numerical correction is usually recommended. While using the UC method, the relationships between the extent of peak broadening, calibration slopes and interdetector volume are complex and can contribute to the occurrence of undiscovered errors. For this reason, an understanding of this problem, using a model, is necessary. The results of the UC method are compared with those obtained using dual-detection with known Mark-Houwink-Kuhn-Sakurada parameters (MHKS method), light-scattering (LS)/concentration detection as well as with the results obtained using conventional calibration. Due to peak-broadening, the slope of a local calibration curve and the weight-to-number average ratio, (Mw/Mn)", obtained using the UC method, increase compared to the theoretical values, whereas they decrease using the MHKS or LS methods. The increase when using the UC method is even larger compared to evaluation using conventional calibration. The effect of the error in interdetector volume on the slopes of local calibrations and the weight-to-number average ratios is opposite in the UC method to that found using the MHKS and LS methods.     

Size Exclusion Chromatography with Low Angle Laser Light Scattering Detection

Abstract

A review is given of the use of low angle laser light scattering (LALLS) detection in conjunction with size exclusion chromatography (SEC) to measure polymer molecular weight distributions without conventional SEC column calibration methods. A summary of light scattering theory is presented, and instrument configurations and principles of operation are described for two LALLS photometers. Also discussed are the overall performance of the SEC/LALLS technique and data from selected applications.     

Size Exclusion Chromatography of Polymers With Random Tetrafunctional Branching

Abstract

The behaviour of polydisperse branched copolymers of methyl methacrylate with a small amount of randomly situated tetrafunctional ethylenedimethacrylate units was investigated by means of size exclusion chromatography (SEC). A procedure has been suggested for the conversion of apparent values of molecular parameters of real polymer branched systems (M_{n, app}; M_{w, app} obtained from SEC data by calibration of the separation system using a linear polymer) into actual values. This was made possible by off-line coupling of SEC and viscometry. The branching was characterized by the weight average number of branching sites in the macro-molecule, m_w, and the branching index, y.     

The application of the size exclusion chromatography/ viscometry technique to the determination of molar-mass and long-chain branching in polychloroprene

The coupling of a low-pressure size exclusion chromatography (SEC) with a modified Ubbelohde capillary viscometer is described. This SEC/viscometry system measures the flow time of aliquot fractions (5ml) of the SEC effluent along with the refractive index change. This dual detection leads to the determination of the intrinsic viscosity as a function of the elution volume, thus allowing a precise use of Benoit's universal calibration. Moreover information of the branching factors (degree of long-chain branching, long-chain branching frequency) can be calculated under certain assumptions. As an example the changes in molar-mass distribution and branching factors during mechanical shear degradation (mastication) of special polychloroprene samples were investigated. It is shown that the SEC/viscometry system is especially suitable for the characterization of polymers with broad molar-mass distribution and extremely high molecular tails. The data provided by this method are useful for the investigation of the viscoelastic behaviour of concentated polychloroprene solutions and for quality control of polymers in the rubber and adhesives industries.     

一种新的标定体积排除色谱（SEC）的方法

基于体积排除色谱中测得的淋出体积和动态激光光散射中测得的平动扩散系数都直接依赖于高分子的流体力学体积这一事实，本文在理论上提出了一种把淋出体积分布和平动扩散系数分布二者结合起来标定体积排除色谱的新方法，并且在实验上通过对宽分布的聚苯乙烯标准样品的测试证实了该方法的可行性．     

Monitoring the Synthesis of Au Nanoparticles Using SEC

In this paper, it is demonstrated that size-exclusion chromatography (SEC) with SDS (10 mM) as the mobile phase can be used to rapidly determine the sizes of Au nanoparticles (NPs). It was found that standard particles at sizes ranging from 12.1 to 79.1 nm eluted in a linear manner with respect to the elution time. The reproducibility of the separation over the entire range of the calibration curve was high; the relative standard deviations of the elution times were less than 0.3%. Next, the separation conditions to characterize the sizes of Au NPs prepared through seed-assisted synthesis were employed. Using this approach, it was found that the rate of addition of the reducing agent influenced the sizes of the final products; for example, rapid addition of the reducing agent resulted in polydisperse Au NP products. SEC analysis revealed that the presence of NaOH in the synthesis medium decreased the sizes of the Au NPs dramatically. When using SEC to analyze Au NPs produced through seed-assisted synthesis, a good correlation existed between the sizes obtained using SEC and those provided by transmission electron microscopy (TEM). Based on these findings, SEC appears to be an efficient and accurate tool for characterizing the sizes of NPs fabricated through seed-assisted synthesis.     

稀土催化聚合的顺式聚丁二烯的单分散粘度方程

对十一个未经分级的多分散稀土顺丁橡胶试样作了渗透压和粘度的测量,计算得到的数均分子量_n及特性粘数[<η>]列于表中。     

Calibration in High Temperature Gel Permeation Chromatography of Linear Polyethylenes

Abstract

The mathematical relationship between the gel permeation chromatography calibration curves of polystyrene and linear polyethylene has been determined in 1,2,4-trichlorobenzene at 130, 135 and 140°C. The experimentally determined relationship is in good agreement with that predicted from application of the principles of the universal calibration technique and published Mark-Houwink coefficients. Definition of this relationship enables the use of polystyrene as a secondary standard for gel permeation chromatographic determination of linear polyethylene molecular weight determinations.     

Size Exclusion Chromatography of Poly(vinylpyrrolidone)

Abstract

Poly(vinylpyrrolidone) and poly(ethylene oxide) separate by hydrodynamic volume on Toyo Soda TSK-PW columns in a mixed solvent mobile phase of 50:50 (v/v) MeOH/H₂O containing 0.1M LiNO₃. From this separation a single universal calibration curve based on hydrodynamic volume [η]M can be obtained. Accurate weight average molecular weights of PVP were obtained by both SEC/LALLS and universal calibration showing good agreement between the two methods. SEC/LALLS overestimates the number average molecular weight for broad distribution polymers due largely to the lack of sensitivity of the LALLS detector to the low molecular weight portion of the polymers, while the universal calibration method slightly underestimates the number average molecular weight as compared to osmometric values.     

Polypropylene Characterization by High Temperature Sec Coupled with Lalls

Abstract

A new and less time consuming procedure for the preparation and the handling of polypropylene solutions has been developed. The precision of direct determination of molar mass from SEC/LALLS is satisfactory in the range near the maximum of the distribution function, but at low molar masses one better relies on a conventional calibration function. Molar mass distributions and averages were evaluated on the basis of a combination of SEC/LALLS and calibration with a broad HDPE standard.     

High Performance Size Exclusion Chromatography on Microparticulate Silicas and its Application to Forensic Analysis

Abstract

Size exclusion chromatography (SEC) on irregular silicas of 5–10 um particle size and 60–130 Å average pore size is shown to provide a rapid method for the comparison of a variety of forensically significant samples. Use of dual detectors (UV/fluorescence of UV/Refractive Index) was found to enhance the value of the technique for forensic screening.     

Data processing method for the determination of accurate molecular weight distribution of polymers by SEC/MALDI-MS.

A novel data processing method for a hyphenated technique, size exclusion chromatography/matrix-assisted laser desorption/ionization-mass spectrometry (SEC/MALDI-MS), has been proposed to determine accurate molecular weight distributions on the basis of the individual oligomer species of a polymer. This method is based on the concept that the individual peak intensities of MALDI mass spectrum observed for every SEC fraction with narrow molecular weight distribution could be adjusted to the quantified values to reveal the accurate molecular weight distribution using the signal intensity of the corresponding fraction on the SEC chromatogram observed with a refractive index detector. At first, the theory of the proposed date processing is described in detail. Then, experimental verification of the method is described. This was performed through the characterization of mixtures of three kinds of monodispersed polystyrene reference materials (weight average molecular weight = ca. 6000, 10000, and 18000) as model samples. An accurate trimodal molecular weight distribution for the individual oligomer species of the sample was obtained without any influence of the chromatographic band broadening observed in the original SEC chromatogram. Moreover, the method for depicting the elution profiles of individual oligomer species during SEC separation was also obtained as a "mass chromatogram" using the data processing procedure.     

Use of Commercial Acrylonitrile Standard for Wastewater Analysis

Abstract

It was found that a commercially available aqueous standard solution of acrylonitrile (1 mg/ml) was below manufacturer specification in concentration when compared to an authentic standard prepared from the pure compound. Comparative analyses of the two solutions, commercial and laboratory prepared acrylonitrile, were conducted by gas chromatography using a flame ionization detector with analytical conditions similar to those recommended by the EPA for acrylonitrile analyses. The acrylonitrile content of the commercial solution was found to be approximately 30% lower than specified. Commercial venders have provided solutions of the 114 organic priority pollutants which are convenient for instrumental calibration. There needs to be concern for experimental results reported with regards to accuracy and estimated detection limit when using such standards.     

Two‐dimensional chromatography as a tool for studying band broadening in size‐exclusion chromatography

Comprehensive 2‐D size‐exclusion chromatography (SEC×SEC) has been realized. SEC×SEC is not a useful technique for characterizing complex polymers. However, it is potentially an elegant tool to study band‐broadening phenomena. If narrow fractions can be collected from the first dimension, the band broadening in the second dimension is only due to chromatographic dispersion. This would allow a clear distinction to be made between chromatographic band broadening (column and extra‐column) and SEC selectivity (band broadening due to sample polydispersity). In comparison with MALDI‐MS, SEC×SEC allows the study of polymers across a much broader molar‐mass range.     

Size exclusion chromatography with dual-beam refractive index gradient detection of polystyrene samples

Non-aqueous size exclusion chromatography (SEC) of polystyrenes (as model analytes) is examined using the microscale molar mass sensor (μ-MMS) for detection. The μ-MMS is combined with SEC to demonstrate this simultaneously universal and molar mass selective detection method for polymer characterization. The μ-MMS is based on measuring the refractive index gradient (RIG) at two positions (upstream and downstream) within a T-shaped microfluidic channel. The RIG is produced from a sample stream (eluting analytes in the mobile phase) merging with a mobile phase stream (mobile phase only). The magnitude of the RIG is measured as a probe beam deflection angle and is related to analyte diffusion coefficient, the time allowed for analyte diffusion from the sample stream toward the mobile phase stream, and the bulk phase analyte refractive index difference relative to the mobile phase. Thus, two deflection angles are measured simultaneously, the upstream angle and the downstream angle. An angle ratio is calculated by dividing the downstream angle by the upstream angle. The μ-MMS was found to extend the useful molar mass calibration range of the SEC system (nominally limited by the total exclusion and total permeation regions from ∼100,000 g/mol to ∼800 g/mol), to a range of 3,114,000-162 g/mol. The injected concentration LOD (based on 3 s statistics) was 2 ppm for the upstream detection position. The point-by-point time-dependent ratio, termed a ‘ratiogram’, is demonstrated for resolved and overlapped peaks. Within detector band broadening produces some anomalies in the ratiogram shapes, but with highly overlapped distributions of peaks this problem is diminished. Ratiogram plots are converted to molar mass as a function of time, demonstrating the utility of SEC/μ-MMS to examine a complex polymer mixture.     

Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

Simulation of size-exclusion chromatography distribution coefficients of comb-shaped molecules in spherical pores comparison of simulation and experiment

Simulations of the distribution coefficients of linear polymers and regular combs with various spacings between the arms have been performed. The distribution coefficients were plotted as a function of the number of segments in order to compare the size exclusion chromatography (SEC)-elution behavior of combs relative to linear molecules. By comparing the simulated SEC-calibration curves it is possible to predict the elution behavior of comb-shaped polymers relative to linear ones. In order to compare the results obtained by computer simulations with experimental data, a variety of comb-shaped polymers varying in side chain length, spacing between the side chains and molecular weights of the backbone were analyzed by SEC with light-scattering detection. It was found that the computer simulations could predict the molecular weights of linear molecules having the same retention volume with an accuracy of about 10%, i.e. the error in the molecular weight obtained by calculating the molecular weight of the comb-polymer based on a calibration curve constructed using linear standards and the results of the computer simulations are of the same magnitude as the experimental error of absolute molecular weight determination.