Development of liquid-liquid extraction and separation method for ruthenium(III) with 2-octylaminopyridine from succinate media: Analysis of catalysts

Ruthenium(III) has been efficiently extracted from 0.05 M sodium succinate at pH 9.5 by 2-octylaminopyridine in xylene and stripped with aqueous 10% (w/v) thiourea solution and determined spectrophotometrically. Various parameters viz., pH, weak acid concentration, reagent concentration, stripping agents, contact time, loading capacity, aq.: org. volume ratio, solvent has been thoroughly investigated for quantitative extraction of ruthenium(III). The utility of method was analyzed by separating the ruthenium(III) from binary mixture along with the base metals like Cu(II), Ag(I), Fe(II), Co(II), Bi(III), Zn(II), Ni(II), Se(IV), Te(IV), Al(III) and Hg(II) as well as platinum group metals (PGMs). Ruthenium(III) was also separated from ternary mixtures like Os(VIII), Pd(II); Pd(II), Pt(IV); Pd(II), Au(III); Pd(II), Cu(II); Fe(II), Cu(II); Ni(II), Cu(II); Co(II), Ni(II); Se(IV), Te(IV); Rh(III), Pd(II); Fe(III), Os(VIII). The stoichiometry 1: 2: 1 (metal: succinate: extractant) of the proposed complex was determined by slope analysis method by plotting graph of logD _[Ru(III)] versus logC _[2-OAP] and logD _[Ru(III)] versus logC _[succinate]. The interference of various cations and anions has been studied in detail and the statistical evaluations of the experimental results are reported. The method was successfully applied for the analysis of ruthenium in various catalysts, synthetic mixtures corresponding to the composition of alloys and minerals.     

2,4-Dioxo-4-(4-hydroxy-6-methyl-2-pyrone-3-yl)butyric acid ethyl ester: Reagent for identifying and estimating metal ions in ring oven analysis

Ligand gave variously colored or fluorescent rings when reacted with several kinds of ions on a ring oven (Schleicher and Schuell filter paper 589²). With ions of Al(III), Be(II), Co(II), Cr(III), Cu(II), Fe(III), and Ni(II) the reactions were sensitive enough to enable application of ring colorimetry or fluorometry (excitation at 366 nm) for quantitation (detection limits, 0.1–2.0 μg of metal). A procedure for estimation of Al(III), Cr(III), and Fe(III) in mixtures was based on reaction with Ligand in combination with EDTA pretreatment, but omitting ion separation. Al(III) could be estimated reliably at its detection-limit-level, in the presence of up to 100 times as much of both Cr(III) and Fe(III).     

Quantitative separation of gold from cadmium, indium, zinc and other elements by cation-exchange chromatography in hydrochloric acid-acetone medium

Gold(III) can be separated from Cd, In. Zn, Ni, Cu(II), Mn(II), Co(II), Mg, Ca, Al, Fe(III), Ga and U(VI) by adsorbing these elements on a column of AG50W-X8 sulphonated polystyrene cation-exchange resin from 0.1M HCl containing 60% v v acetone, while Au(III) passes through and can be eluted with the same reagent. Separations are sharp and quantitative. The amounts of gold retained by the resin are between 1 and 2 orders of magnitude lower than encountered during adsorption from aqueous 0.1M HCl. Recoveries for mg amounts of gold are 99.9% or better and for ng amounts are still better than 99%, as shown by radioactive tracer methods. Hg(II), Bi, Sn(IV), the platinum metals and some elements which tend to form oxy-anions in dilute acid accompany gold. All other elements, though not investigated in detail, should be retained, according to their known distribution coefficients. Relevant elution curves, results of quantitative separations of binary mixtures and of recovery tests are presented.     

Complexation and Thermal Studies of Uric Acid with Some Divalent and Trivalent Metal Ions of Biological Interest in the Solid State

Nine new [metal uric acid] complexes [M(Ua) n ]°·XH 2 O have been synthesized. These complexes have been characterized by elemental analysis, X-ray diffraction (XRD), magnetic susceptibility ( w eff. ), FTIR spectra, thermal analysis (TG & DTA), and electronic spectra (UV/visible). Uric acid (HUa) coordinates as a bidentate ligand to Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Al(III), Cr(III) and Fe(III) through the protonated N-7 within the imidazole ring and O-6 within the pyrimidine ring. Uric acid forms neutral metal urate complexes with all the above metal ions. The quantitative compositions were determined as [M(Ua) 2 ·(H 2 O) 2 ]°·XH 2 O where M(II)=Mn, Fe, Co, Ni, Cu, Zn and X=2, 4, 2, 4, 2, 2, respectively. The M(II) complexes exhibit an isostructural octahedral coordination with N-7, O-6 of two uric acid ligand molecules, and O of two water molecules. Compositions were also determined as [M(Ua) 3 ]°·YH 2 O where M(III)=Al, Cr, Fe and Y=6, 3, 3 respectively. All the M(III) complexes form an isostructural octahedral coordination with N-7 and O-6 of three uric acid ligand molecules. Iron(III) complexes prepared with N 1 , N 3 and N 9 -methyl uric acid yielded brown complexes with a metal ligand ratio of 1 3, while N 7 -methyl uric acid did not yield a complex due to blockage of N-7 with a methyl group.     

Determination of Metal Ions in Natural Waters by Flame-AAS after Preconcentration on a 5-Amino-1,3,4-Thiadiazole-2-Thiol Modified Silica Gel.

ABSTRACT

5-amino-1,3,4-thiadiazole-2-thiol groups attached on a silica gel surface have been used for adsorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II), Pb(II) and Zn(II) from aqueous solutions. The adsorption capacities for each metal ion were (in mmol.g^?1): Cd(II)= 0.35, Co(II)= 0.10, Cu(II)= 0.15, Fe(III)= 0.20, Hg(II)= 0.46, Ni(II)= 0.16, Pb(II)= 0.13 and Zn(II)= 0.15. The modified silica gel was applied in the preconcentration and quantification of trace level metal ions present in water samples (river, and bog water).     

Electro-migration on paper in the separation of ions

Summary Platinum and palladium ions have been separated electrophoretically from each other using hydrochloric acid and sodium citrate solutions. Their separation from Hg, Cu, Cd, Bi, Fe, Zn, Co and Ni has also been effected.Part III: Z. analyt. Chem. 155, 406 (1957).     

Amberlite XAD-7 impregnated with Xylenol Orange: a chelating collector for preconcentration of Cd(II), Co(II), Cu(II), Ni(II), Zn(II) and Fe(III) ions prior to their determination by flame AAS

A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5-5.0, 4.5, 4.0-5.0, 4.0, 5.0 and 5.0-7.0, respectively, and their desorptions by 2 mol L(-1) HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g(-1) of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO3, Na2SO4 and of cations, Mg2+ and Ca2+ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL(-1). The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD < or = 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of approximately 3.0%.     

Sorption-spectroscopy and test determination of uranium(VI) and iron(III) from a single sample on the solid phase of fiber materials filled with an AB-17 ion exchanger

Diffuse reflectance spectroscopy has been used for the study of the sorption of malonate and glycolate complexes of uranium(VI) and iron(III), present simultaneously in solution, onto the solid phase of fiber materials filled with an AB-17 anion exchanger. In the form of malonate complexes uranium(VI) is determined in 0.5 M HCl on substrate discs with immobilized Arsenazo III, while iron(III) is determined on substrate discs with potassium thiocyanate in 0.5 M HCl. The dependence of the analytical signals on the concentrations of U(VI) and Fe(III) is linear in the ranges 0.02–0.16 μg/mL; the detection limit is 0.01 μg/mL. The possibility of analysis of U(VI) and Fe(III) mixtures in ratio from 1: 5 to 5: 1 in the presence of 2-fold concentrations of Zr(IV), Th(IV), and Ti(IV), 5-fold concentrations of Bi(III), 10-fold concentrations of Cu(II), 20-fold concentrations of La(III), 100-fold concentrations of Ni(II) and Zn(II), and 200-fold concentrations of Co(II) and Ca(II) has been demonstrated. Standard color scales in the concentration range from 0.02 to 0.2 μg/mL have been used for the visual determination of uranium(VI) and iron(III).     

Thin Layer and Paper Chromatographic Separations of d-Block Cations Complexed with ANILS

Abstract

Diverse binary, ternary and quaternary mixtures of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II) and Au(III) d-block cations complexed with p-dimethylamino- and p-diethylamino- anils of thiopheneglyoxal have been separated by thin layer and paper chromatographic techniques. But quantitative separations have been done by thin layer chromatography, on account of wide difference in migration rates and high compectedness of complexes on gel layers. Chromatogram fragments visualised as such have been estimated spectrophotometrically.     

Flow Analysis of Transition Metals by Thermal Lensing

The conditions for the flow determination of Al(III), Bi(III), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Nd(III), Ni(II), Pb(II), Pr(III), and Zn(II) by reaction with Xylenol Orange in aqueous solutions at pH 4.5 and the determination of Cd(II), Co(II), Cu(II), Fe(II), Ni(II), Pb(II), and Zn(II) by reaction with 4-(2-thiazolylazo)resorcinol in water–ethanol mixtures (5 : 1) at pH 5.0 using an injected sample volume of 80 L were proposed. The limits of detection were n × 10^–8–n × 10^–7 mol/L; the linearity ranges in the calibration graphs were of about three orders of magnitude; the relative standard deviation was of 3–7%.     

Salisaldehyde-2-aminobenzimidazole schiff base complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)

New metal complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with salicylidine-2-aminobenzimidazole (SABI) are synthesized and their physicochemical properties are investigated using elemental and thermal analyses, IR, conductometric, solid reflectance and magnetic susceptibility measurements. The base reacts with these metal ions to give 1:1 (Metal:SABI) complexes; in cases of Fe(III), Co(II), Cu(II), Zn(II) and Cd(II) ions; and 1:2 (Metal:SABI) complexes; in case of Ni(II) ion. The conductance data reveal that Fe(III) complex is 2:1 electrolyte, Co(II) is 1:2 electrolyte, Cu(II), Zn(II) and Cd(II) complexes are 1:1 electrolytes while Ni(II) is non-electrolyte. IR spectra showed that the ligand is coordinated to the metal ions in a terdentate mannar with O, N, N donor sites of the phenloic -OH, azomethine -N and benzimidazole -N3. Magnetic and solid reflectance spectra are used to infer the coordinating capacity of the ligand and the geometrical structure of these complexes. The thermal decomposition of the complexes is studied and indicates that not only the coordinated and/or crystallization water is lost but also that the decomposition of the ligand from the complexes is necessary to interpret the successive mass loss. Different thermodynamic activation parameters are also reported, using Coats-Redfern method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Beiträge zur Ringofenmethodik. XV

Microchimica Acta - Ein Trennungsschema für Cs(I), Ag(I), Ba(II), Zn(II), Cd (II), Mn(II), Pb(II), Cu(II), Ni(II), Co(II), Bi(III), Al(III) und Fe(III) unter Verwendung von Dithiooxamid als...     

Determination of Metal Ions by High Performance Liquid Chromatography

The mixture of metal ions [Bi(III), Fe(III), Fe(II), Cu(II), Zn(II), Ni(II), Co(II), Pb(II), Cd(II), Mn(II)] were separated in the bonded-phase strong cation exchange column (Vydac-401 SA) and monitored at 540 nm after a postcolumn reaction with 4-(2-pyridylazo)-resorcinol (PAR). Citrate, tartrate, lactate and α-hydroxyisobutyrate buffer were used as eluent and it has been found that the elution order of some metal ions were changed with different eluents. The detection limits and the calibration curves of metal ions were also studied.     

Cation-exchange separation of uranium from other elements in tetrahydrofuran-nitric acid media containing trioctylphosphine oxide

The batch distribution coefficients of Cu(II), Za, Cd, Fe(III), Hg(II), Mg, Co(II), Ni, Pb, Ca and Bi were determined on the strongly acidic cation-exchange resin Dowex 50 x 8 in 0.1M trioctylphosphine oxide in tetrahydrofuran-5% 12M nitric acid. In this mixture all these metal ions, except Bi, have high K(d)-values and can be separated quantitatively from uranium which has a distribution coefficient of 0.1. Mixtures of U with Cu, Ni, Co, Cd or Fe were analysed to test the applicability of such separations. Different titrimetric and spectrophotometric methods were used to determine the elements subsequent to their separation from uranium on ion-exchange columns. The results show that accurate and effective separations can be achieved.     

Reversed-phase HPLC separation of complex mixtures of trace metals as dibenzyldithiocarbamate chelates

The dibenzyldithiocarbamate chelates of Cd(II), Pb(II), Bi(III), Hg(II), Ni(II), Cu(II), As(III), Fe(III), Co(III) and In(III) are separated by reversed-phase HPLC in isocratic conditions. The procedure is simple, rapid, and gives satisfactory separations with high efficiency and sensitivity at mobile phase compositions very rich in organic modifier (85-88% CH(3)CN). The detection limits range from 1.4 to 14 mug/1. The elution order is correlated with the ability of the central metal atom to affect the electronic distribution of the ligand, which has readily polarizable donor atoms. Infrared spectroscopy data corroborate this assumption.     

Synthesis and structure investigation of the antibiotic amoxicillin complexes of d-block elements

The study of some transition metals (M) and amoxicillin trihydrate (ACT) ligand complexes (M-ACT) that formed in solution involved the spectrophotometric determination of stoichiometric ratios and their stability constants and these ratios were found to be M:ACT = 1:1, 1:2 and 2:1 in some instances. The calculated stability constants of these chelates, under selected optimum conditions, using molar ratio method have values ranging from K(f) = 10(7) to 10(14). These data were confirmed by calculations of their free energy of formation deltaG, which corresponded to their high stabilities. The separated solid complexes were studied using elemental analyses, IR, reflectance spectra, magnetic measurements, mass spectra and thermal analyses (TGA and DTA). The proposed general formulae of these complexes were found to be ML(H2O)w(H2O)x(OH)y(Cl)2, where M = Fe(II), Co(III), w = 0, x = 2, y = 1, z = 0; M = Co(II), w = 0, x = 1, y = 0, z = 1; M = Fe(III), w = 0, x = 1, y = 2, z = 0; M = Ni(II), Cu(II) and Zn(II), w = 2, x = 0, y = 1, z = 0, where w = water of crystallization, x = coordinated water, y = coordinated OH(-) and z = Cl- in the outer sphere of the complex. The IR spectra show a shift of nu(NH) (2968 cm(-1)) to 2984-2999 cm(-1) of imino group of the ligand ACT and the absence of nu(CO) (beta-lactame) band at 1774 cm(-1) and the appearance of the band at 1605-1523 cm(-1) in all complexes suggest that 6,7-enolization takes place before coordination of the ligand to the metal ions. The bands of M-N (at 625-520 cm(-1)) and of M-O (at 889-7550 cm(-1)) proved the bond of N (of amino and imino groups) and O of C-O group of the ligand to the metal ions. The reflectance spectra and room temperature magnetic measurements refer to octahedral complexes of Fe(II) and Fe(III); square planner form of Co(II), reduced Co(III), Ni(II) and Cu(II)-ACT complexes but tetrahedral form of Zn-ACT complex. The thermal degradation of these complexes is confirmed by their mass spectral fragmentation. These data confirmed the proposed structural and general formulae of these complexes.     

Asymmetric Schiff Base (N 2 O 3 ) Complexes as Ligands Towards Mn(II), Fe(III) and Co(II), Synthesis and Characterization

Heterobi- and tri-nuclear complexes [LMM'Cl] and [(LM) 2 M'](M=Ni or Cu and M'=Mn, Fe or Co) have been synthesised. The heteronuclear complexes were prepared by stepwise reactions using two mononuclear Ni(II) and Cu(II) complexes of the general formula [HLM]·1/2H 2 O, as ligands towards the metal ions, Mn(II), Fe(III) and Co(II). The asymmetrical pentadentate (N 2 O 3 ) Schiff-base ligands used were prepared by condensing acetoacetylphenol and ethylenediamine, molar ratio 1 1, to yield a half-unit compound which was further condensed with either salicylaldehyde or naphthaldehyde to yield the ligands H 3 L 1 and H 3 L 2 which possess two dissimilar coordination sites, an inner four-coordinate N 2 O 2 donor set and an outer three-coordinated O 2 O set. 1 H NMR and IR spectra indicate that the Ni(II) and Cu(II) ions are bonded to the inner N 2 O 2 sites of the ligands leaving their outer O 2 O sites vacant for further coordination. Different types of products were obtained according to the type of metal ion. These products differ in stoichiometry according to the type of ligand in the parent compound. Electronic spectra and magnetic moments indicate that the structures of the parent Ni(II) and Cu(II) complexes are square-planar while the geometry around Fe(III), Mn(II) and Co(II) in their products are octahedral as elucidated from IR, UV-visible, ESR, 1 H NMR, mass spectrometry and magnetic moments.     

Organic acid solutions in the chromatography of inorganic ions VIII. Cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media

Summary The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the ammonium form. Separation of Fe(III)/Cu(II), Fe(III)/Cu(II)/Zn(II), Fe(III)/Co(II)/Mn(II), Cu(II)/Ni(II)/Mn(II), Fe(III)/Cu(II)/Co(II)/Mn(II), Fe(III)/Cu(II)/Ni(II)/Cd(II), Yb(III)/Eu(III), Sc(III)/Y(III),Sc(III)/Yb(III)/Dy(III) and Nb(V)/Yb(III)/Ho(III) has been achieved, among others.This work was supported by C.N.R. of Italy.     

X-ray fluorescence determination of As, Bi, Co, Cu, Fe, Ni, Pb, Se, V and Zn in natural water and soil extracts after preconcentration of their pyrrolidinedithiocarbamates on cellulose filters

A simple method for the elements preconcentration on thin-layer paraffin-treated cellulose filters was proposed. It was found that pyrrolydinedithiocarbamates of As(III), Bi, Cd, Co, Cu, Fe(III), Ni, Pb, Se(IV), V(V) and Zn obtained after mixing of sample (3-5 ml min⁻¹) and reagent (0.7-1.0 ml min⁻¹) streams were quantitatively recovered from 100 ml sample. The sample acidity was adjusted to pH 4.8-5.2 for preconcentration of Cd, Co, Cu, Fe(III), Ni, Pb, V(V) and Zn, and to 2 M HCl for preconcentration of As, Bi and Se. The optimum reagent concentration was found to be 0.1%. The elements were determined on the filters by X-ray fluorescence spectrometry. The detection limits achieved were 0.1-4.0 μg of element on the filter. Relative standard deviation (R.S.D.) was not higher than 0.08 while determining 5-50 μg of elements on filter. Accuracy and precision of the technique proposed were evaluated by the analysis of spiked natural samples.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.