基于光电振荡器的宽带射频下转换及在高清视频传输的应用

以无压缩全高清视频的光载无线传输为背景,通过研究宽带射频光子下转换技术,从而构建全高清视频的实时传输系统,其中下转换系统主要基于光电振荡器实现.由于光电振荡器的注入锁定,光微波信号中的载波信号被提取出来,并反馈至调制器,与宽带光微波信号混频,在光域实现信号下转换.实验论证了载频为10GHz,码率大于2Gb/s的信号下转换和有线无线传输.利用天线和光纤实现了距离为0.5m的无线分发和距离为10km的有线传输.本文还成功实现了1.5Gb/s无压缩高清视频信号的实时传输.实验结果表明,该系统具有大带宽、抗电磁干扰等优点,同时利用光电振荡器的自动相位跟踪技术,无须外加锁相等操作.整个下转换系统简单稳定,为高清视频的有线无线传输提供了论证和演示平台.     

基于光电振荡器的宽带射频下转换及在高清视频传输的应用

以无压缩全高清视频的光载无线传输为背景,通过研究宽带射频光子下转换技术,从而构建全高清视频的实时传输系统,其中下转换系统主要基于光电振荡器实现.由于光电振荡器的注入锁定,光微波信号中的载波信号被提取出来,并反馈至调制器,与宽带光微波信号混频,在光域实现信号下转换.实验论证了载频为10GHz,码率大于2Gb/s的信号下转换和有线无线传输.利用天线和光纤实现了距离为0.5 m的无线分发和距离为10km的有线传输.本文还成功实现了1.5Gb/s无压缩高清视频信号的实时传输.实验结果表明,该系统具有大带宽、抗电磁干扰等优点,同时利用光电振荡器的自动相位跟踪技术,无须外加锁相等操作.整个下转换系统简单稳定,为高清视频的有线无线传输提供了论证和演示平台.     

Noise properties of an optical frequency comb from a SESAM-mode-locked 1.5-μm solid-state laser stabilized to the 10?13 level

We present a detailed investigation of the noise properties of an optical frequency comb generated from a femtosecond diode-pumped solid-state laser operating in the 1.5-??m spectral region. The stabilization of the passively mode-locked Er:Yb:glass laser oscillator, referred to as ERGO, is achieved using pump power modulation for the control of the carrier envelope offset (CEO) frequency and by adjusting the laser cavity length for the control of the repetition rate. The stability and the noise of the ERGO comb are characterized in free-running and in phase-locked operation by measuring the noise properties of the CEO, of the repetition rate, and of a comb line at 1558?nm. The comb line is analyzed from the heterodyne beat signal with a cavity-stabilized ultra-narrow-linewidth laser using a frequency discriminator. Two different schemes to stabilize the comb to a radio-frequency (RF) reference are compared. The comb properties (phase noise, frequency stability) are limited in both cases by the RF oscillator used to stabilize the repetition rate, while the contribution of the CEO is negligible at all Fourier frequencies, as a consequence of the low-noise characteristics of the CEO-beat. A?linewidth of ??150?kHz and a fractional frequency instability of 4.2×10^?13 at 1?s are obtained for an optical comb line at 1558?nm. Improved performance is obtained by stabilizing the comb to an optical reference, which is a cavity-stabilized ultra-narrow linewidth laser at 1558?nm. The fractional frequency stability of 8×10^?14 at 1?s, measured in preliminary experiments, is limited by the reference oscillator used in the frequency comparison.     

10、20、40Gb/s速率下恶化信号的光时钟提取

报道了一种全部由10GHz带宽的元件构成的、用于时钟提取的双环注入锁模光纤激光器.这种装置集光电振荡器(OEO)与注入锁模光纤激光器的优点于一体,利用它不仅从恶化的数据信号中实现了10Gb/s的位时钟提取,在采用了光电振荡器的分频、锁模光纤激光器的有理谐波锁模以及F-P梳状滤波器的频率倍乘技术以后,还从20Gb/s和40Gb/s的恶化信号中提取出了位时钟.该方案的另一个优点是无码型效应.     

Injection-locked fiber laser for tunable millimeter-wave generation

A dual-ring injection-locked fiber laser consisting of a ring of optoelectronic oscillator (OEO) and a ring of fiber laser is proposed and demonstrated for tunable millimeter-wave (mm-wave) generation. The approach combines the advantages of mm-wave generation based on OEOs and fiber lasers, which can generate a high-frequency, low-phase-noise, and a mode-hopping-free mm-wave signal with a large tuning range. A low-phase-noise mm-wave signal with a tunable frequency of 30-50 GHz and a tuning step of 10 GHz is obtained in a proof-of-concept experiment. The tuning range can be as large as 140 GHz if a high bandwidth photodetector is applied.     

64 GHz optical millimeter-wave generation by octupling 8 GHz local oscillator via a nested LiNbO3 modulator

A novel scheme to generate a 64 GHz optical millimeter (mm)-wave via a nested LiNbO₃ Mach-Zehnder modulator with an 8 GHz local oscillator is proposed and simulated. Since the frequency response of the modulator and the local oscillator frequency are greatly reduced, the bandwidth requirements of the optical and electrical components in the transmitter are significantly decreased. The simulation results show that the generated optical mm-wave signal maintains good performance even after being transmitted over 20 km standard single-mode fiber.     

Broadband optical frequency comb generation with a phase-modulated parametric oscillator

We introduce a novel broadband optical frequency comb generator consisting of a parametric oscillator with an intracavity electro-optic phase modulator. The parametric oscillator is pumped by 532-nm light and produces near-degenerate signal and idler fields. The modulator generates a comb structure about both the signal and the idler. Coupling between the two families of modes results in a dispersion-limited comb that spans 20 nm (5.3 THz). A signal-to-noise ratio of >30 dB in a 300-kHz bandwidth is observed in the beat frequency between individual comb elements and a reference laser.     

一种基于串联谐振腔的高性能光电振荡器

提出了一种利用串联谐振腔来抑制光电振荡器边模的方案. 此方案中, 在传统光电振荡器结构中加入无源微波谐振腔结构来提高滤波器的Q值. 分析了该结构的基本原理, 并与传统光电振荡器结构进行对比, 此结构能有效提高边模抑制比. 实验中产生了10 GHz的微波信号, 所测得的边模抑制比达72 dB, 单边带相位噪声为-122 dBc/Hz@10 kHz. 同时, 利用锁相技术, 振荡频率的稳定性得到了很大的改善, 在3 h内漂移小于± 4 Hz. 该方案无需增加有源器件, 保留了传统光电振荡器低相位噪声的优势, 又有效抑制了边模, 为光电振荡器的应用提供了一种新的方法.     

一种新型双环路光电振荡器

利用偏振分束器(PBS)和合束器(PBC)在不增加有源器件的基础上设计了一种双环路光电振荡器。该振荡器可以同时产生光、电两种输出。由于没有增加有源器件,可以避免附加电噪声的引入。此外,光载波在光域中是正交耦合,消除了随机干涉和拍噪声对振荡频率的影响。通过理论分析,双环结构的光电振荡器可以有效抑制每一单环路中起振的边模。经过实验对比,采用双环结构可以把边模抑制比提高30~70 dB。最后,利用该方案和普通商用器件得到了中心频率为12 GHz的振荡,测得边模抑制比为50~70 dB,相位噪声为-93 dBc/Hz at10kHz,Q值达到1010。     

基于双平行马赫-曾德尔调制器的大动态范围微波光子下变频方法

为了提高微波光子下变频链路的性能,提出了基于集成双平行马赫-曾德尔调制器的微波光子下变频方法.通过理论推导和数值仿真分析了系统的增益和无杂散动态范围,实验搭建了基于双平行马赫-曾德尔调制器的下变频链路,控制直流偏置电压使双平行马赫-曾德尔调制器工作在高载波抑制的双边带调制模式,并对链路进行了性能测试.实验结果表明:该下变频链路的增益为7.43 d B,无杂散动态范围达到了110.85 d B/Hz2/3,工作频段可覆盖5—18 GHz的宽频范围.基于双平行马赫-曾德尔调制器的下变频方法可优化设计输出频谱,系统结构简单、易于实现,为微波光子下变频链路提供了有效的解决方案.     

Injection locked multi-section gain-coupled dual mode DFB laser for terahertz generation

A dual mode multi-section gain-coupled distributed feedback laser with tunable mode spacing is subharmonically injection locked at 0.315 THz. The injected signal consists of an optical comb with harmonics 35 GHz apart and a bandwidth of approximately 1.9 THz. The optical comb is a result of strong four-wave mixing in a highly-nonlinear dispersion-shifted fiber. In order to observe locking of the multi-section laser, the output is optically downconverted to RF frequencies using the same optical comb. The locked multi-section DFB laser is a coherent and tunable optical source suitable for continuous-wave terahertz generation systems.     

Coupled frequency-doubling optoelectronic oscillator based on polarization modulation and polarization multiplexing

A coupled frequency-doubling optoelectronic oscillator (OEO) is proposed and experimentally demonstrated, which is constructed based on the perfect combination of polarization modulation and polarization multiplexing. A fundamental microwave signal at 9.95 GHz or a frequency-doubled microwave signal at 19.9 GHz is generated with a wavelength-independent sidemode-suppression ratio (SMSR) as high as 78 dB obtained. The phase noise of the generated 19.9-GHz signal is ? 103.45 dBc/Hz at 10-kHz frequency offset, indicating a good short-term stability. The proposed scheme is simple and flexible, which can find applications in radars and wireless communications.     

A tunable frequency-decuple optoelectronic oscillator based on frequency comb and stimulated Brillouin scattering

An optically tunable frequency-decuple optoelectronic oscillator based on optical frequency comb (OFC) and stimulated Brillouin scattering has been proposed and theoretically analyzed. In the proposed structure, the OFC is generated using a cascaded Mach–Zehnder modulator and a dual-parallel Mach–Zehnder modulator (DPMZM), and multi-pump lights could be obtained instead of one pump. A quintuple Brillouin frequency shift oscillation signal generated by using Brillouin gain-loss compensation principle and carrier phase-shifted double sideband modulation is realized by using the DPMZM to double the oscillation frequency. As a consequence, a decuple frequency shift microwave signal is achieved. Profit from the wavelength-dependent nature of Brillouin frequency shift, a frequency-decuple signal at 10 \(f_{b}\) which could be tunable from 87.9750 to 94.4750 GHz by simply tuning the wavelength of the tunable laser source is obtained in theory.     

Ultra-stable microwave generation with a diode-pumped solid-state laser in the 1.5-μm range

We demonstrate the first ultra-stable microwave generation based on a 1.5-μm diode-pumped solid-state laser (DPSSL) frequency comb. Our system relies on optical-to-microwave frequency division from a planar-waveguide external cavity laser referenced to an ultra-stable Fabry–Perot cavity. The evaluation of the microwave signal at ~10 GHz uses the transportable ultra-low-instability signal source ULISS^®, which employs a cryo-cooled sapphire oscillator. With the DPSSL comb, we measured ?125 dBc/Hz phase noise at 1 kHz offset frequency, likely limited by the photo-detection shot-noise or by the noise floor of the reference cryo-cooled sapphire oscillator. For comparison, we also generated low-noise microwave using a commercial Er:fiber comb stabilized in similar conditions and observed >20 dB lower phase noise in the microwave generated from the DPSSL comb. Our results confirm the high potential of the DPSSL technology for low-noise comb applications.     

基于光学-微波同步的低噪声微波产生方法

低噪声微波在冷原子光钟、光子雷达、大科学装置远程同步等领域具有重要的应用价值.本文介绍了一种基于光学-微波相位探测技术的低噪声微波产生方案,利用光纤环路光学-微波鉴相器,将超稳激光的频率稳定度相干传递至介质振荡器.实验采用梳齿相位参考至超稳激光的窄线宽掺铒光纤飞秒光学频率梳,结合光纤环路光学-微波鉴相器和精密锁相装置,将7 GHz介质振荡器同步至光频梳重复频率的高次谐波,同步后的光脉冲序列与微波信号的剩余相位噪声为–100 d Bc/Hz@1 Hz,定时抖动为8.6 fs [1 Hz—1.5 MHz];通过搭建两套低噪声微波产生系统,测得7 GHz微波的剩余相位噪声为–90 d Bc/Hz@1 Hz,对应的频率稳定度为4.8×10^–15@1 s.该研究结果对基于光学相干分频的低噪声微波产生提供了一种新思路.     

Narrowband and tunable ring optical parametric oscillator with a volume Bragg grating

We demonstrate a tunable nanosecond optical parametric oscillator with a narrowed signal spectrum. This was done by use of a volume Bragg grating based retroreflector, which makes the tuning simple and yields a compact design. Using periodically poled KTiOPO4 as the nonlinear medium, we generated 0.42 mJ of signal energy at 760 nm with a tuning range of 5 nm(2.6 THz) and a bandwidth of 0.25 nm(130 GHz) when the oscillator was pumped at 532 nm with 1.3 mJ of energy.     

Bandwidth scaling and spectral flatness enhancement of optical frequency combs from phase-modulated continuous-wave lasers using cascaded four-wave mixing

We introduce a new cascaded four-wave mixing technique that scales up the bandwidth of frequency combs generated by phase modulation of a continuous-wave (CW) laser while simultaneously enhancing the spectral flatness. As a result, we demonstrate a 10?GHz frequency comb with over 100?lines in a 10?dB bandwidth in which a record 75?lines are within a flatness of 1?dB. The cascaded four-wave mixing process increases the bandwidth of the initial comb generated by the modulation of a CW laser by a factor of five. The broadband comb has approximately quadratic spectral phase, which is compensated upon propagation in single-mode fiber, resulting in a 10?GHz train of 940?fs pulses.     

A novel optical mm-wave generation scheme based on three parallel Mach-Zehnder modulators

We propose a novel optical mm-wave generation scheme based on three parallel Mach-Zehnder modulators (MZMs) for the first time. First, the scheme is investigated theoretically, which suggests that it can be used for sextupling, 12-tupling, and 18-tupling mm-wave generation. Then simulation results are given, 60 GHz mm-wave is generated from 5 GHz, or 10 GHz RF oscillator based on frequency 12-tupling or sextupling, and 90 GHz mm-wave is generated from 5 GHz RF oscillator based on frequency 18-tupling. The optical sideband suppression ratio (OSSR) and the radio frequency spurious suppression ratio (RFSSR) are analyzed by simulation, in which several non-ideal factors are taken into consideration. Results indicate that all the three mm-wave generation methods are practical and very good performance can be obtained when the extinction ratio of the MZM is 30 dB, even if the extinction ratio of the MZM is 20 dB, the performance is still good, especially for the sextupling mm-wave generation method, whose performance is excellent and insensitive to the extinction ratio of MZM, the non-ideal RF driving voltage and the non-ideal DC bias. At last, we set up a RoF system by simulation to verify the transmission performance of the scheme. The BER performance and eye diagrams are given.     

Wideband optical comb generation using an injection-locked feedback loop

This paper presents a novel circuit for wideband optical comb generation which will be useful in DWDM applications. The injection-locked feedback loop broadens the bandwidth of the optical comb. The injection-locked laser diodes perform amplification, bandpass filtering as well as laser RIN suppression. Several hundred GHz bandwidth optical comb can be generated by this circuit within a reasonable power envelope.     

Ultrafast optical frequency comb synthesizer and analyzer

We propose an ultrafast optical arbitrary waveform synthesizing/analyzing technique demonstrated with 2 Tbit/s waveforms. An ultrafast waveform was generated by manipulating the amplitude and phase of a 400?GHz optical frequency comb using a newly developed colorless optical synthesizer. The 400?GHz optical frequency comb was generated from a 25?GHz optical frequency comb using a colorless arrayed waveguide grating. This waveform was then analyzed on the frequency axis using a custom heterodyne-detection technique based on the dual-heterodyne mixing method. The phase and amplitude spectra can be observed in parallel using another optical frequency comb as a reference combined with an arrayed waveguide grating. This optical system, named the ultrafast optical frequency comb synthesizer and analyzer, can synthesize and analyze an arbitrary waveform in the THz frequency region.