STUDIES ON THE POLYMERIZATION OF β-CYCLODEXTRIN WITH EPICHLOROHYDRIN*

Different proportions of β-cydodextrin and epichlorohydrin were used to prepare a group of β-cyclodextrin polymers. The relationship between the reaction extent and the molar ratios of reactants was discussed according to the results of ~1H-NMR, ~(13) C-NMR spectra and elemental analysis. Especially, high resolution ~1H-NMR spectra were usd for studying the reaction active sites and the extent of reaction. The solubility of oil soluble drugs in water was largely improved in the presence of water-soluble β-cyclodextrin polymer.     

STRUCTURE AND PROPERTIES OF PHOSPHROUS-CONTAINING POLY（ARYL ETHER KETONE） WITH BISPHENOL-A MOIETY

A phosphrous-containing poly(aryl ether ketone)was synthesized derived from bisphenol-A and bis[4-(4- fluorobenzoyl)phenyl] phenyl phosphine oxide(FPPPO)by nucleophilic substitution reaction.The structure of the polymer was characterized by FT-IR,~1H-NMR and ~(31)p-NMR.The thermal property of the PAEK was measured by DSC and TGA. The glass transition temperature(T_g)of the polymer was 205℃,and the 5% weight loss temperature under nitrogen was 475℃.Good solubility of the polymer in organic solvents,such as N-methylpyrrolidone,dimethylformamide, dimethylacetamide,dimethylsulfoxide and chloroalkanes was observed,flexible film was obtained from the polymer's CH_2Cl_2 solution.The limiting oxygen index(LOI)of the PAEK was 40,which indicated that organic phosphorus moiety can offer good flame retardant property to the polymer.     

NONLINEAR OPTICAL PROPERTIES OF X-TYPE CHROMOPHORES AND THEIR DOPED FILMS

Two X-type chromophores, 2-[4-(4,5-di(4-nitrophenyl) imidazolyl) phenyl]-4,5-di(4-methoxyphenyl)-imidazole (DNPIPDMOPI), 2-[4-(4,5-di(4-nitrophenyl)-imidazolyl) phenyl]-4,5-di(4-aminophenyl)-imidazole (DNPIPDAPI), were synthesized and characterized. The results show that they possess good nonlinearity, considerable blue-shifted absorption (385 nm and 379 nm in THF) and high decomposition temperature (377℃ and 405℃). These mean that the X-type chromophores possess a rather good nonlinearity-transparency-thermal stability trade-off. The multi-step corona-poling technique at elevated temperature and in-situ SHG measurements were used to obtain and evaluate the poled films of these chromophores doped in PMMA. The largest SHG signals appeared at 110-120℃, which are 12.5 pm/V and 16.7 pm/V respectively. The dependence of poling induced orientation stability on temperature was measured by depoling experiments and the results indicate that the poling-induced orientation of the films is stable at about 100℃. Theoretic analyses imply that better orientation stability arises from the X-type structure of chromophore. The X-type chromophore has two crossed intramolecular CT, both βxxx and βxyy can contribute to the second-order susceptibility, and the ratio of the tensorial components (γ = βxyy/βxxx) is about 1/3, so the orientation decay of the films induced by rising temperature will provide a certain compensation for the contribution of βxyy of chromophores.     

STUDY ON THE ADSORPTION OF OXIDATION OF CROSSLINKED β—CYCLODEXTRIN AND ITS CXOMPOSITE ADSORBENT WITH DIALYTIC MEMBRANE

An urea adsorbent with an aldo structure was obtained by the oxidation of a crosslinked β-cyclodextrin polymer.The highest urea adsorption capacity reached 56.7mg/g in 0.05Maqueous phosphate buffer 37℃ and pH=7.4,and decrease to 4.8mg/g in in aqueous human serum albumin.The composite adsorbent was prepared by the oxidation of a crosslinked β-cyclodextrin and dialytic membrane.It was found that the composite adsorbent has a higher urea adsorption selectivity and capacity compared to that of the oxidation of a crosslinked β-cyclodextrin adsorbent when urea is in aqueous human serum albumin.     

SYNTHESIS AND THERMAL PROPERTIES OF POLYBENZOXAZOLE FROM SOLUBLE PRECURSOR WITH HYDROXY-SUBSTITUTED POLYENAMINONITRILE

Aromatic polybenzoxazole (PBO) precursor, hydroxy-substituted polyenaminonitrile, was prepared by direct polycondensation of 1,4-bis(l-chloro-2,2-dicyanovinyl)benzene (CCB) and 4,6-diaminoresorcinol dihydrochloride (DAR) using pyridine and N,N-dimethylacetamide as condensing agent and solvent. The precursor has good solubility in polar aprotic solvent which is due to the strong dipolar nature of the main chain. The soluble precursor was subjected to thermal cyclization in an inert atmosphere to convert it into the corresponding PBO, which has its 5% weight loss temperature at 540℃ The fully cyclized PBO were characterized by FT-IR and TGA. The introduction of 10% mol 1,3,5-benzenetricarboxylic chloride (BTC) into the main chain not only has little effect on the solubility of PBO precursor but also raises its 5% weight loss temperature to 552℃ and char yield at 700℃ for the cyclized PBO with BTC.     

SYNTHESIS OF MAIN CHAIN LIQUID CRYSTALLINE COPOLYESTERS WITH X-SHAPED TWO-DIMENSIONAL MESOGENIC UNIT AND CROWN ETHER CYCLE

A novel series of main chain liquid crystalline copolyesters with X-shaped two-dimensional mesogenic unit and crown ether cycle of cis-4,4′-bis(4-hydroxyphenylazo) dibenzo-18-crown-6 was prepared via solution condensation polymerization from 4,4′-(α,ω-hexanedioyloxy) dibenzoyl dichloride (M1), 2,5-bis(p-octyloxybenzoyloxy) hydro-quinone (M2) and cis-4,4′-bis(4-hydroxyphenylazo) dibenzo-18-crown-6 (M3). Monomer M1 was synthesized by esterification and substitution of adipoyl chloride with p-hydroxybenzoic acid, monomer M2 was synthesized by esterfication and reduction reaction of 2,5-dihydroxybenzoquinone and p-octanoxybenzoyl chloride and monomer M3 was synthesized by diazotization and coupling reaction of cis-diaminodibenzo-18-crown-6 with phenol. The molecular weights of copolyesters are not high,and the intrinsic viscosity [η] of copolyesters ranges from 0.25-0.35. The monomers' structures were identified by using elemental analysis, IR, UV, 1H-NMR, MS, etc. All the copolyesters are yellowish powders and insoluble in THF and CHCl3 at room temperature except CP9. The properties of copolyesters were investigated by using GPC, [η] , DSC, TG,WAXD and POM. It was found that all the copolyesters entered into liquid crystal phase when they were heated to above their melting temperature (Tm). The typical smectic and nematic phase texture can be observed on POM. Their mesophase transition temperature and thermal stability change regularly with varying the content of cis-4,4′-bis(4-hydroxyphenylazo)dibenzo-18-crown-6 unit in the copolyesters.     

SYNTHESIS AND CHARACTERIZATION OF COPOLYMER OF 2,5-BIS[（4-METHOXYPHENYL）OXYCARBONYL]STYRENE AND STYRENE WITH HIGH MOLECULAR WEIGHT

The random copolymers of styrene and 2,5-bis[(4-methoxyphenyloxycarbonyl)styrene] (MPCS) with different copolymerization ratio were synthesized by conventional free radical polymerization. The copolymer having high molecular weight was experimentally elucidated using a combination of proton nuclear magnetic resonance spectroscopy and gel permeation chromatography. The liquid crystalline behavior of the copolymer was studied using differential scanning calorimetry, X-ray diffractometry and polarized optical microscopy. It was found that the liquid crystalline behavior was dependent on the content of styrene. Experimental results show that the copolymer could turn into a liquid crystalline phase at about 180℃ when the content of styrene was less than 20%. The mechanical properties of the copolymer were also studied. Preliminary results indicate that the tensile strength decreases while the tensile modulus increases as the content of MPCS is increased.     

SYNTHESIS AND POLYMERIZATION OF α-METHACRYLYOXYLETHYLOXYCARBONYLMETHYL-ω-(N,N-DIETHYLDITHIOCARBAMYL)POLYSTYRENE MACROMONOMERS

Polystyrene macromonomers with different molecular weight were prepared by radical polymerization of styrene(St) in benzene using β-methacryloxylethyl 2-N,N-diethyldithiocarbamylacetate (MAEDCA) as a monomer-iniferter.Characterization of the macromonomer by ~1H-NMR showed that the end groups were α-methacrylyoxylethyloxycarbonyl-methyl and ω-(N,N-diethyldithiocarbamyl). The macromonomer was difficult to homopolymerize, but it was easilycopolymerized with methyl methacrylate (MMA) initiated by AIBN to form graft copolymers (PMMA-g-PSt) with PStbranches randomly distributed along the PMMA backbone. Copolymerization reaction and the structure of the graftcopolymers were strongly affected by M_n and concentration of the macromonomer. The composition and M_n of the purified graft copolymer were determined by ~1H-NMR and GPC analysis.     

Preparation and characterization of phenyl carbamate derivative P-cyclodextrin bonded phase for chiral HPLC

A partially substituted β-cyclodextrin chiral stationary phase was prepared by the reaction of phenyl isocyanate. The enantiomers of a series of O,O-diethyl(p-methylbenzenesulfonamido)-aryl(or alkyl)-methylphos-. phonates were studied on the prepared phenyl carbamate derivative β-cyclodextrin bonded phase and a commercial ( S)-(. )-l-(l-naphthyl)ethylcarbamate derivative β-cyclodextrin bonded phase on normal phase chromato-graphic condition. Results show that the prepared phenyl carbamate derivative β-cyclodextrin bonded phase has better enantiomeric selectivity to the series of compounds. A chiral recognition mechanism was suggested for the separation of these novel organic phosphorus enantiomers.     

SYNTHESIS AND CHARACTERIZATION OF SOLUBLE POLYPHENYLENE COMPOSED OF p-PHENYLENE AND m-PHENYLENE UNITS

NiCl_2(bpy) catalyzed polycondensation between p-dibromobenzene and m-dibromobenzene has been carried outunder vdrious conditions. The polycondensation endows the copolymer with an M_n of 2300 (by GPC, polystyrene standards)and good solubility in organic solvents. The fluorescence spectra of the copolymer measured with tetrahydrofuran solutionshows an emission maximum (λ_(max)) at 372.8 nm, whereas for the film the maximum shifts to 436.6 nm.     

COPOLYMERIZATION OF BUTADIENE AND ISOPRENE CATALYZED BY V(acac)_3-Al(i-Bu)_2Cl-Al_2Et_3Cl_3 CATALYST AND CHARACTERIZATION OF THE PRODUCTS

Copolymerization of butadiene and isoprene catalyzed by the catalyst system V(acac)_3-Al(i-Bu)_2Cl-Al_2Et_3Cl_3 has been studied. Composition, microstructure, crystallinity and melting point of the copolymer obtained were determined by PGC, IR, X-ray diffraction and DSC methods respectively. The results revealed that the product was a copolymer and not a blend. The butadiene units presented in the copolymer were of trans-1,4-configuration, while the isoprene units were of both trans-1,4-and 3,4-forms. The melting point and crystallinity of the copolymer decrcascd with increase of molar ratio of isoprene to hutadiene.     

SYNTHESIS AND PROPERITIES OF SHISH-KEBAB-TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENE）S

Abstract The novel shish-kebab-type liquid crystalline poly（p-phenylene）s were synthesized through Suzuki coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer 1） and 1,4-benzenediboronic acid bistrimethylene cyclic ester （monomer 2）. Their structure and properties were characterized by GPC, DSC, X-ray diffraction and polarizing optical microscope （POM）. It was found that the polymers turned to liquid crystalline phase above their melting point. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The mesophase was identified by X-ray diffraction method. The polymers could dissolve in common organic solvents and show strong blue fluorescence. The maximum absorption bands of polymers prepared from annealed films have large red-shift due to the spontaneous orientation of the liquid crystalline side chains. The same phenomena were also observed in the fluorescence spectra.     

SYNTHESIS OF POLYMERIC β-CYCLODEXTRIN SUPPORTED BY CROSSLINKED POLY(ACRYLAMIDE-co-VINYLAMINE)AND ITS CATALYSIS OF THE HYDROLYSIS OF p-NITROPHENYL ACETATE

Polymeric β-cyclodextrin (β-CD) supported by crosslinked poly(acrylamide-co-vinylamine) was synthesized as anartificial analog of hydrolytic enzyme and its catalysis of the hydrolysis of p-nitrophenyl acetate (p-NPA) was theninvestigated. The result showed that the polymer-supported β-CD could accelerate the hydrolytic reaction of p-NPA morequickly than β-CD itself and crosslinked poly(acrylamide-co-vinylamine) alone. The acceleration rate of the polymer-supported β-CD was about 10 times as fast as that of free β-CD in 0.01 mol/L phosphate buffer (pH 7.4) containing 32%DMSO at 37±0.1℃ when the molar amount of β-CD units in the polymer was equal to that of free β-CD in the experiments.The enhanced acceleration of thc polymer-supported β-CD should be ascribed to the cooperative contribution of theinclusion effect of β-CD ring and the nucleophilic effect of amino groups on the polymeric support.     

STRUCTURE AND THERMAL MECHANICAL PROPERTIES OF ORIENTED POLYIMIDE (PEI-E)

The strain induced crystallization behaviour in polyimide from 1,4-bis (3', 4'- dicarboxyphenoxy)benzene and 4,4'-oxydianiline (PEI-E)has been investigated by WAXD, DSC and FTIR. The results obtained show that crystallization in PEI-E did take place just after tensile yielding. Meanwhile, the effect of strain induced crystallization on the thermomechanical properties was studied by DMA and TMA, the results of which indicate that the crystallization and hot stretching have a certain influence on the dynamic mechanical properties, such as weakening the βrelaxation and decreasing the glass transition temperature. The TMA results confirm the shifting of glass transition temperature to lower temperature region after hot stretching. This phenomenon could be well explained by the effect of residual stress according to Eyring's theory.     

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENEVINYLENE）

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.     

Synthesis and Conformational Properties of Bis（calix [4] arene）

The bis(calix [4] arene)3 was synthesized in moderate yield by the reaction of p-tert-butylcalix [4] arene (1) with 1,4-bis(chloromethyl) benzene (2). The conformation of all alkylated product 4 was investigated by the variable-temperature ^1H-NMR.     

CHARGE-TRANSFER AND ENERGY-TRANSFER IN THE PHOTO-INDUCED COPOLYMERIZATION OF 2-VINYLNAPHTHALENE WITH MALEIC ANHYDRIDE

The initiation mechanism of the copolymerization of 2-vinylnaphthalene with maleic anhydride was studied under irradiation of 365 nm. The excited complex was formed from (1) the local excitation of 2-vinylnaphthalene followed by the charge-transfer interaction with maleic anhydride and (2) the excitation of the ground state charge-transfer complex, and then it collapsed to 1,4-tetramethylene biradical for initiation. A1: 1 alternating copolymer was formed in different monomer feeds. Addition of benzophenone could greatly enhance the rate of copolymerization through energy-transfer mechanism.     

Electrochemical Studies of 1,4-Bis[2-(2-pyridyl)-vinyl] Benzene and 1,4-Bis[2-(4-pyridyl) vinyl] Benzene Laser Dyes via Cyclic Voltammetry, Convolutive Voltammetry and Digital Simulation Methods

Electrochemical properties of two diolefinic laser dyes namely 1,4-bis[2-(2-pyridyl)-vinyl] benzene (2PVB) and 1,4-bis[2-(4-pyridyl) vinyl] benzene (4PVB) have been investigated using cyclic voltammetry and convolutive voltammetry combined with digital simulation at a platinum electrode in 0.1 mol/L tetrabutyl ammonium perchlorate (TBAP) in the two different solvents acetonitrile (CH3CN) and dimethylformamide (DMF). The species were reduced via consumption of two sequential electrons to form radical anion and dianion. In switching the potential to positive direction, the two compounds were oxidized by loss of one electron, which was followed by a fast isomerisation process. The electrode reaction pathway and the electrochemical parameters of the investigated compounds were determined using cyclic voltammetry. The extracted electrochemical parameters were verified and confirmed via digital simulation and convolutive voltammetry methods.     

CONFORMATION OF Asn-Ala-Gly-Ala-Asn AND ITS DERIVATIVES IN SOLUTION——A CD SPECTRA ANALYSIS

The CD method has been used to study the conformation of the pentapeptido Asn-Ala-Gly-Ala-Asn(NAGAN) and the tetrapeptides Asn-Ala-Gly-Ala(NAGA) and Asn-D-Ala-Gly-Ala-NH_2(NDAGA) in solution. At low pH the far UV CD speetra of aqueous solutions of NAGAN show a positive extremum at 215 nm and a negative extremum at 232.5 nm. Under this condition, the molecule of NAGAN may assume a β-turn structure. In the solution of 90% ethanol or tri-fluoroethanol at pH 5.8, NAGAN reveals CD spectra with a negative 218 nm extremum. The[θ]_218 values are independent of the concentration of NAGAN. Au intramolecular β-pleated sheet-like structure is suggested to explain the negative peak.The CD spectra of NAGA show a single positive band at around 215 nm. The possibility of forming a β-turn by NAGA has been discussed. Only the 196 nm negative extremum canbe seen in the spectra of NDAGA: It seems as if NDAGA is in the form of a random coil.According to the report made by Pan et al. all these peptides possess analgesic     

PERVAPORATION SEPARATION FOR TOLUENE/n-HEPTANE MIXTURE BY POLYIMIDE MEMBRANES CONTAINING FLUORINE

Five kinds of polyimides were synthesized using five dianhydrides (including 2,2-bis[4-(3,4-dicarboxyphenoxy)- phenyl] propane dianhydride (BPADA),3,3',4,4'-diphenylsulfone-tetracarboxylic dianhydride (DSDA),4,4'- (hexafluoroisopropylidene)-diphthalic anhydride (6FDA),1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride (HQDPA), and 4,4'-oxydiphthlic dianhydride (ODPA)) and 2,2-bis[4-(4-aminophenoxy)phenyl] hexafluoropropane (BDAF) via the two- step method that included polyaddition to form the polyamic aci...