Novel titanium complexes bearing two chelating phenoxy‐imine ligands and their catalytic performance for ethylene polymerization

Three substituted salicylaldimine ligands ( 1a, 2a, 3a ) and their titanium complexes bis[N‐(5‐nitrosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 1 ), bis[N‐(5‐chlorosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 2 ) and bis[N‐(5‐bromosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 3 ) were synthesized and characterized by mass spectra, ¹H NMR and elemental analyses, as well as complex 1 by X‐ray structure analysis. In the presence of methylaluminoxane (MAO), 1, 2 and 3 are efficient catalysts for ethylene polymerization in toluene. Under the conditions of T = 60 °C, p = 0.2 MPa, and n(MAO)/n(cat) = 1500, the activities of 1–3 reached 4.55–8.80 × 10⁶ g of PE (mol of Ti h bar)^?1, which is much higher than that of the unsubstituted complex bis[N‐(salicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 4 ). The viscosity‐average molecular weight of polyethylene ranged from 24.8 × 10⁴ to 44.9 × 10⁴ g/mol for 1–3 and the molecular weight distribution M_w/M_n from 1.85 to 2.34. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature are favorable for 1–3 /MAO to rise the catalytic activity and the molecular weight of polyethylene. Copyright © 2007 John Wiley & Sons, Ltd.     

Aminopyridinate–FI Hybrids,Their Hafnium and Titanium Complexes,and Their Application in the Living Polymerization of 1‐Hexene

Based on two well‐established ligand systems, the aminopyridinato (Ap) and the phenoxyimine (FI) ligand systems, new Ap‐FI hybrid ligands were developed. Four different Ap‐FI hybrid ligands were synthesized through a simple condensation reaction and fully characterized. The reaction of hafnium tetrabenzyl with all four Ap‐FI hybrid ligands exclusively led to mono(Ap‐FI) complexes of the type [(Ap‐FI)HfBn₂]. The ligands acted as tetradentate dianionic chelates. Upon activation with tris(pentafluorophenyl)borane, the hafnium‐dibenzyl complexes led to highly active catalysts for the polymerization of 1‐hexene. Ultrahigh molecular weights and extremely narrow polydispersities support the living nature of this polymerization process. A possible deactivation product of the hafnium catalysts was characterized by single‐crystal X‐ray analysis and is discussed. The coordination modes of these new ligands were studied with the help of model titanium complexes. The reaction of titanium(IV) isopropoxide with ligand 1 led to a mono(Ap‐FI) complex, which showed the desired fac‐mer coordination mode. Titanium (IV) isopropoxide reacted with ligand 4 to give a complex of the type [(ApH‐FI)₂Ti(OiPr)₂], which featured the ligand in its monoanionic form. The two titanium complexes were characterized by X‐ray crystal‐structure analysis.     

Branched polyethylene prepared by in situ copolymerization of ethylene with monotitanocene and modified methylaluminoxane catalyst

Branched polyethylene was synthesized in heptane used as a polymerization medium with monotitanocene catalyst composed of η⁵‐pentamethylcyclopentadienyl tribenzyloxy titanium and modified methylaluminoxane (mMAO) that contained different amounts of residual trimethylaluminum (TMA). The residual TMA more strongly reduced Ti(IV) complexes to Ti(III) and Ti(II) ones, and Ti(IV) active species were suggested to be more effective for ethylene polymerization. Influences of the polymerization temperature and Al/Ti molar ratio on the catalytic activity and the degree of branching, branch length, and molecular weight of polyethylene were investigated. The obtained polymers were confirmed by ¹³C NMR to be higher molecular weight polyethylene containing significant amounts of isolated ethyl branches, butyl branches, or both. Branched polyethylene was prepared by the in situ copolymerization of ethylene with 1‐butene and 1‐hexene, which were formed through a proposed mechanism including metallcycloheptane and metallcyclopentane intermediates of Ti(II) species that were produced by the reaction of Ti(IV) complexes with TMA coexisting in mMAO. There was a remarkable increase in the chance of 1‐butene being produced from metallcyclopentane of Ti(II) intermediates with an increase in the polymerization temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4258–4263, 2000     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for a-Olefin Polymerization

Totally sixteen new titanium and zirconium non-Cp complexes supported by Schiff-base, or thiophene diamide ligands have been synthesized. The complexes are obtained by the reaction of M(OPr-i)4(M=Ti,Zr) with the corresponding Schiff-base ligand in 1:1 molar ratio in good yield. The thiophene diamide titanium complex has been prepared from trimethylsilyl amine [N,S,N] ligand and TiCl4 in toluene at 120℃. All complexes are well charac-terized by ^1H NMR, IR, MS and elemental analysis. When activated by excess methylaluminoxane (MAO), complexes show moderate catalytic activity for ethylene polymerization, and complex If (R^1=CH3,R^2=Br) exhibits the highest activity for ethylene and styrene polymerization. When the complexes were preactivated by triethylaluminum (TEA), both polymerization activities and syndiotacticity of the polymers were greatly improved.     

Carrier influence on the paramagnetic and catalytic properties of supported titanium complexes

Alumina-silica possessing various Al₂O₃/SiO₂ ratios was used as a carrier of surface titanium complexes. The systems obtained were examined as models for the investigation of the macroligand (inorganic gel) influence on the physicochemical properties of supported transition metal complexes. The titanium complexes were prepared first by the reaction of CpTiCl₃, with the hydroxyl groups of the gel and then reduced by an excess of BuLi. The influence was established of the basic gel properties on: (a) the amount of titanium(IV) and titanium(III) complexes on the alumina-silica gel surfaces; (b) the symmetry of the surface Ti^III surface complexes; (c) the electron density around the surface-Ti^III ions, ionic or covalent bonds character in a complex; and (d) the catalytic activity in olefin hydrogenation.     

Observation and identification of the catalytically active species of bis(phenoxy-imine) group 4 transition metal complexes for olefin polymerization using 1H NMR spectroscopy

Solution structures of bis(phenoxy-imine) group 4 transition metal complexes (FI Catalysts) were investigated using ¹H NMR spectroscopy. At least two isomers exist in equilibrium for FI Catalysts precursors, bis[N-(3-tert-butylsalicylidene)anilinato]zirconium(IV) dichloride ( 1 ), and bis[N-(3,5-dicumylsalicylidene)anilinato]zirconium(IV) dichloride ( 2 ), while bis[N-(3-tert-butylsalicylidene)-2,3,4,5,6-pentafluoroanilinato]titanium(IV) dichloride ( 3 ) exhibits only one isomer under the conditions examined. Upon activation with MAO, all FI Catalysts ( 1-3 ) generate two species at ambient temperature judging from some key signals in the ¹H NMR. When temperature is raised (up to 75°C), one species ( 1a-3a ) converts irreversibly to the other species ( 1b-3b ). The resulting species, 1b-3b , are stereochemically rigid, in contrast to precursors 1 and 2 . Species 3b , derived from a living FI Catalyst, exhibited virtually no reactivity toward olefin insertion. The imine protons of species 1b-3b are temperature and solvent polarity sensitive. Two possibilities are proposed for the assignment of species 1b-3b, i) heterobinuclear complexes of group 4 metal and alkylaluminum with methyl and/or chlorine as bridging groups and ii) phenoxy-imine ligated aluminum complexes whose ligands are transferred from the group 4 metal. The latter is more probable from the separate synthesis of LAlMe₂ (L: phenoxy-imine ligand). When 3 was activated with MAO in the presence of olefins, a new imine signal was observed. This species ( 3c for ethylene and 3d for propylene) is thermally more robust than 3a toward transformation to 3b and assignable to the living propagating species.     

Photochemical properties of peroxo complexes of titanium,intermediate products in the photocatalytic liquid-phase oxidation of alcohols

A study has been made of the photochemical reactions of titanium(IV) peroxo complexes formed in the reaction of titanium tetrachloride with hydrogen peroxide in alcoholic solutions and which are characterized by intense charge transfer bands at 360–425 nm. Irradiation of the solutions with light of = 254 nm leads to the decomposition of the titanium(IV) peroxo complexes, the formation of titanium(III) compounds, as well as the oxidation of the alcohol to aldehyde. In the irradiated frozen solutions associated complexes of titanium(III), organic free radicals formed from the alcohol molecule, as well as peroxy radicals have been identified by EPR. Irradiation with light corresponding to the longwave band of the peroxo complexes leads to their decomposition but titanium(III) compounds and alcohol oxidation products are not formed in this case. In irradiated frozen solutions the formation of paramagnetic titanium(IV) complexes containing the fragment Ti...O ₂ has been established, as well as other paramagnetic particles identified tentatively as coordinated Ti...O ₂ ^· radicals or radical pairs. It is shown that the decomposition of hydrogen peroxide in the presence of titanium(IV) compounds is photocatalytic.Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 24, No. 1, pp. 67–74, January–February, 1988.     

Chromatographic retention of molybdenum,titanium and uranium complexes for removal of some interference in inductively-coupled plasma mass spectrometry

Complexes of molybdenum(CI) or titanium(IV) with N-mehylfurohydroxamic acid (N-MFHA) are retained on a column packed with polystyrene/divinylbenzene. At the pH values chosen, copper , zinc and cadmium are washed rapidly through the column and are detected by inductively-coupled plasma mass spectrometry (i.c.p./m.s.) without interference from metal oxide ions of titanium or molybdenum. Detections limits are 1 to 2 μg 1^?1, and analyte recoveries are essentially 100%. the resin capacity for the titanium and molybdenum complexes is sufficient for several hundred injections and the complexes can be radily washed from the column. Uranium(IV) also forms a stable complex with N-MFHA, and ionizatin interference caused by excess of uranium can be avoided by chromatographic removal of the uranium complex. Various other potentially interfering elements with aqueous oxidations states of ⁺4 or higher (e.g., Sn, W, Hf or Zr) could also be separated by this technique.     

Olefin polymerization and copolymerization by complexes bearing [ONNO]‐Type salan ligands: Effect of ligand structure and metal type (titanium,zirconium, and vanadium)

A series of novel titanium(IV) complexes bearing tetradentate [ONNO] salan type ligands: [Ti{2,2′‐(OC₆H₃‐5‐t‐Bu)₂‐NHRNH}Cl₂] (Lig¹TiCl₂: R = C₂H₄; Lig²TiCl₂: R = C₄H₈; Lig³TiCl₂: R = C₆H₁₂) and [Ti{2,2′‐(OC₆H₂‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴TiCl₂) were synthesized and used in the (co)polymerization of olefins. Vanadium and zirconium complexes: [ M{2,2′‐(OC₆H₃‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴VCl₂: M = V; Lig⁴ZrCl₂: M = Zr) were also synthesized for comparative investigations. All the complexes turned out active in 1‐octene polymerization after activation by MAO and/or Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄]. The catalytic performance of titanium complexes was strictly dependent on their structures and it improves for the increasing length of the aliphatic linkage between nitrogen atoms (Lig¹TiCl₂ << Lig²TiCl₂ < Lig³TiCl₂) and declines after adding additional tert‐Bu group on the aromatic rings (Lig³TiCl₂ < Lig⁴TiCl₂). The activity of all titanium complexes in ethylene polymerization was moderate and the properties of polyethylene was dependent on the ligand structure, cocatalyst type, and reaction conditions. The Et₂AlCl‐activated complexes gave polymers with lover molecular weights and bimodal distribution, whereas ultra‐high molecular weight PE (up to 3588 kg mol^?1) and narrow MWD was formed for MAO as a cocatalyst. Vanadium complex yielded PE with the highest productivity (1925.3 kg mol_v^?1), with high molecular weight (1986 kg mol^?1) and with very narrow molecular weight distribution (1.5). Copolymerization tests showed that titanium complexes yielded ethylene/1‐octene copolymers, whereas vanadium catalysts produced product mixtures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2111–2123     

Incorporation of Titanium(IV) into Sterically Hindered Schiff Bases of Heterocyclic β -Diketones Involving Ketooximes and Glycol as Coligands: Preparation and Structural Considerations

Titanium(IV) complexes of the general formula TiL(OPr ⁱ )₂ [where LH₂ = R CH₃ where R = ─C₆H₅, ─C₆H₄Cl(p)] were prepared by the interaction of titanium isopropoxide with sterically hindered Schiff bases derived from heterocyclic β -diketones in 1:1 molar ratio in dry benzene. The complexes TiL(OPr ⁱ )₂ were used as versatile precursors for the synthesis of other titanium(IV) complexes. Titanium(IV) complexes of the type TiLL'(OPr ⁱ ) (where L'H═R¹R²C═NOH, R¹ = R² = ─CH₃; R¹ = ─CH₃,R² = ─C₆H₅; R¹ = ─COC₆H₅, R² = ─C₆H₅) were synthesized by the reaction of TiL(OPr ⁱ )₂ with ketooximes (L'H) in equimolar ratio in dry benzene. Another type of titanium(IV) complexes having the general formula TiLGH(OPr ⁱ ) (where GH₂═HO─G─OH, G = ─CH₂─CH₂─) have been prepared by the reaction of TiL(OPr ⁱ )₂ with glycol in 1:1 molar ratio in dry benzene. Plausible structures of these new titanium(IV) complexes have been proposed on the basis of analytical data, molecular weight measurements, and spectral studies.     

Photolysis of titanium (III) complexes in alcoholic matrices at 77‡k

Using the electron spectroscopy and EPR methods, it was found that during UV irradiation of frozen alcoholic solutions of distorted octahedral complexes [Ti(ROH)₄Cl₂]⁺ and [Ti(ROH)₆]³⁺, distorted tetrahedral hydroxide complexes of titanium (III) are obtained. The mechanism of the process, including successive redox reactions of the titanium compounds has been discussed. As the result of a phototransfer of an electron from the central atom orbitals to the vacant orbitals of the ligands (alcohol molecules) a titanium (IV) compound is obtained containing an anion radical of the alcohol as the ligand. The compound is unstable and undergoes ultraspheric transformations. Rupture of the C-O bond occurs in the anionradical of the alcohol; ethyl radicals and hydroxide complexes of titanium (IV) are thus formed, which by the action of light quanta transform into hydroxide complexes of titanium (III).Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 4, pp. 480–484, July–August, 1985.     

Study of iron and titanium complexes with propylenediaminetetraacetic acid by differential pulse polarography : Determination of iron and titanium in Portland cements

Differential pulse polarography is used to study the iron(III) and titanium(IV) complexes with propylenediaminetetraacetic acid (PDTA). The complexes produce reduction peaks at –0.09 V and –0.32 V (vs. Ag/AgCl/3 M KCl), respectively, at pH 4.5. This is used for a simultaneous, precise determination of iron and titanium. The detection limits in aqueous solutions were 5.0 × 10^?7 M for iron and 3.0 × 10^?7 M for titanium and linear calibrations were obtained in the range 4.0 × 10^?4–6.0 × 10^?4 M in both cases. Correct results were obtained for iron trioxide (ca. 2%) and titanium dioxide (ca. 0.3%) in Portland cements, with relative standard deviations of about 3% and 6%, respectively.     

Constrained geometry complexes of titanium (IV) and zirconium (IV) involving cyclopentadienyl fused to thiophene ring

Constrained geometry complexes (CGCs) of titanium (IV) and zirconium (IV) containing isomeric cyclopentadienyls fused to thiophene fragment, i.e., 4,5-dimethylcyclopenta[b]thienyl and 5,6-dimethylcyclopenta[b]thienyl, have been prepared and unambiguously characterized. The molecular structure of the titanium complex [η⁵-(5,6-dimethylcyclopenta[b]thienyl)SiMe₂(N^tBu)-η¹]TiCl₂ was established by X-ray crystal structure analysis. Preliminary studies showed that the studied CGCs/MAO are active olefin polymerization catalysts.     

The formation of self-assembled monolayers of thiophthalocyanine complexes of titanium, vanadium and manganese and their use in l-cysteine electrocatalysis

Self-assembled monolayers (SAMs) based on octapentylthiophthalocyanine complexes of oxovanadium (IV) (OVOPThPc), titanium(IV) (OTiOPThPc), and manganese (III) acetate (AcMnOPThPc), and of tetraphenylthiophthalocyanine complexes of hydroxo manganese(III) (OHMnTPPc) and oxotitanium(IV) (OTiTPPc) are described. The oxidation of l-cysteine was observed at potentials which ranged from 0.52 V to 0.67 V. The detection limits for l-cysteine analysis were of the order of 10^− 7 to 10^− 6 M.     

Molecular structures of a series of substituted bis(η5‐cyclopentadienyl)titanium dihalides CpR2TiX2 [X = F,Cl, Br and I; R = CHPh2, CH(p‐Tol)2 and adamantyl]

Metallocene dihalides and derivatives thereof are of great interest as precursors for catalysts in polymerization reactions, as antitumor agents and, due to their increased stability, as suitable starting materials in salt metathesis reactions and the generation of metallocene fragments. We report the synthesis and structural characterization of a series of eleven substituted bis(η⁵‐cyclopentadienyl)titanium dihalides, namely bis[η⁵‐1‐(diphenylmethyl)cyclopentadienyl]difluoridotitanium(IV), [Ti(C₁₈H₁₅)₂F₂], bis{η⁵‐1‐[bis(4‐methylphenyl)methyl]cyclopentadienyl}difluoridotitanium(IV), [Ti(C₂₀H₁₉)₂F₂], and bis{η⁵‐1‐[bis(adamantan‐2‐yl)methyl]cyclopentadienyl}difluoridotitanium(IV), [Ti(C₁₅H₁₉)₂F₂], together with the bromide and iodide analogues, and the chloride analogues of the diphenylmethyl and adamantyl complexes. These eleven complexes were prepared by the reaction of the corresponding bis(η⁵:η¹‐pentafulvene)titanium complexes with different hydrogen halides (Cl, Br and I). The titanocene fluorides become available via chloride–fluoride exchange reactions.     

Mechanism of photolysis of peroxy complexes of titanium(IV)

Conditions were found under which radical pairs become stabilized during the photolysis of peroxy complexes of titanium(IV) in alcoholic solutions. It was shown that precursors are dimeric complexes of titanium(IV) comprising peripheral peroxy ligands as well as a peroxy bridge. Irradiation by light corresponding to the peroxy ligand — the central ion charge transfer bands, leads to the initiation of an intraspheric reaction, as a result of which two peripheral peroxy ligands undergo a one-electron oxidation, while the bridge undergoes a two-electron reduction. The radical particles (HO₂ ^. and O₂ ) formed from the peripheral peroxy ligands become stabilized at strictly delineated distances relative to one another, which are determined by the structure of the initial dimeric peroxy complex of titanium(IV).Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 24, No. 6, pp. 678–685, November–December, 1988.     

Radical pairs generated by electron phototransfer in peroxide complexes of titanium(IV)

During irradiation of frozen alcohol solutions of the peroxide complexes of titanium(VI) in the near UV region corresponding to the peroxide ligand-central ion charge-transfer band a series of paramagnetic products, identified by the ESR spectra as radical pairs (RP), are formed. They represent associated or dimeric complexes of titanium(IV), containing not less than two radical particles (HO ₂ ^. or O ₂ ^. ) at strictly specified distances from each other, as ligands. The spectroscopic parameters D, D and E characterizing each of the radical pairs in a zero field were determined, and the distances between the paramagnetic centers in the pairs were calculated. Geometric models of the possible initial dimeric peroxide complexes of titanium(IV), the photolysis of which leads to the formation of the radical pairs, were analyzed. It was shown that all the discovered radical pairs can be obtained from one type of structure, i.e., dimeric peroxide complexes of titanium(IV) containing double bridges from the peroxide ligand and also O^2– or OH^–.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 24, No. 5, pp. 568–576, September–October, 1988.     

Ethylene polymerization with FI complexes having novel phenoxy‐imine ligands: Effect of metal type and complex immobilization

A series of bis(phenoxy‐imine) vanadium and zirconium complexes with different types of R³ substituents at the nitrogen atom, where R³ = phenyl, naphthyl, or anthryl, was synthesized and investigated in ethylene polymerization. Moreover, the catalytic performance was verified for three supported catalysts, which had been obtained by immobilization of bis[N‐(salicylidene)‐1‐naphthylaminato]M(IV) dichloride complexes (M = V, Zr, or Ti) on the magnesium carrier MgCl₂(THF)₂/Et₂AlCl. Catalytic performance of both supported and homogeneous catalysts was verified in conjunction with methylaluminoxane (MAO) or with alkylaluminium compounds (Et_nAlCl_3?n, n = 1–3). The activity of FI vanadium and zirconium complexes was observed to decline for the growing size of R³, whereas the average molecular weight (MW) of the polymers was growing for larger substituent. Moreover, vanadium complexes exhibited the highest activity with EtAlCl₂, whereas zirconium ones showed the best activity with MAO. All immobilized systems were most active in conjunction with MAO, and their activities were higher than those for their homogeneous counterparts, and they gave polymers with higher average MWs. That effect was in particular evident for the titanium catalyst. The vanadium complex 3 was also a good precursor for ethylene/1‐octene copolymerization; however, its immobilization reduced its potential for incorporation of a comonomer into a polyethylene chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011