亚烷基锡烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet alkylidenestannylene and ethylene has been investigated with MP2/3-21 G^* and B3LYP/3-21 G* methods, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD(T)//MP2/3-2 IG^* and CCSD(T)//B3LYP/3-21G^* methods, respectively. The results show that the dominant reaction pathway of the cycloaddition is that an intermediate (INT) is firstly formed between the two reactants through a barrier-free exothermic reaction of 39.7 kJ/mol, and the intermediate then isomerizes to a four-membered ring product (P2.1) via a transition state TS2.1 with a barrier of 66.8 kJ/mol.     

二氯亚甲基锗烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet dichloromethylene germylene and ethylene has been investigated with B3LYP/6-31G＊ method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD（T）//B3LYP/6-31G＊ method. On the basis of the surface energy profile obtained with CCSD（T）// B3LYP/6-31G＊ method for the cycloaddition reaction between singlet dichloromethylene germylene and ethylene, it can be predicted that the dominant reaction pathway is that an intermediate INT1 is firstly formed between the two reactants through a barrier-free exothermic reaction of 61.7 kJ/mol, and the intermediate INT1 then isomerizes to an active four-membered ring product P2.1 via a transition state TS2, an intermediate INT2 and a transition state TS2.1, in which energy barriers are 57.7 and 42.2 kJ/mol, respectively.     

异硫氰酸与甲亚胺环加成反应机理的理论研究

对异硫氰酸与甲亚胺形成四元或六元环产物的环加成反应进行了理论研究,结果表明,一分子异硫氰酸与一分子甲亚胺形成四元环(1:1)产物P1的反应(1)为经过一个两性离子中间体的分步反应,其中第二步为速控步骤,其活化热垒为107.86kJ/mol.此外,反应(1)的中间体还可与另一甲亚胺或异硫氰酸分子继续反应形成两个不同的六元环(1:2或2:1)产物P2或P3;这两个反应均为协同反应,其活化势垒分别为15.88和21.82kJ/mol.这些结果与当异硫氰酸酯与亚胺发生环加成反应时,只有类似于P2和P3的两种六元环产物生成的实验事实一致。     

Ab initio studies on mechanisms of cycloaddition reaction between dichloro-vinylidene and ethylene

Mechanisms of cycloaddition reaction between singlet dichloro-vinylidene (R1) and ethylene (R2) have been investigated with MP2 and B3LYP /6-31G* methods, including geometry optimization, vibrational analysis, and energy for the involved stationary points on the potential energy surface. CCSD(T)/6-31G* single point calculations are also applied to the geometries from both methods. CCSD(T) relative energies for the stationary points predicted by MP2 and B3LYP are in a very good agreement. Three reaction pathways are located. Along the first one, one intermediate (INT1) is firstly generated, which then rearranges into a three-membered ring compound (P1) via a small barrier of 5.4 kJ/mol; the other two paths share the other intermediate (INT2), which isomerizes into two four-membered ring compounds (P2 and P3) via a chlorine and a hydrogen transfer, respectively. The barriers of the latter two paths are significantly higher by approximately 25 kJ/mol than that of the former (27.2 and 28.8 vs 5.4 kJ/mol), the major reaction is therefore the formation of P1.     

二氯硅烯与乙烯和甲醛环加成反应机理的理论研究

用RHF/6-31G^*解析梯度方法研究了单重态二氯硅烯与乙烯和甲醛环加成反应的机理,并用二级微扰方法对各构型能量进行了相关能校正.结果表明,两反应历程均由两步组成:(1)二氯硅烯与乙烯和甲醛分别生成了中间配合物,是无势垒的放热反应;(2)中间配合物异构化成产物二氯硅杂环丙烷和二氯硅杂环氧甲烷,其势垒经零点能校正分别为97.43和103.29kJ/mol(MP₂/6-31G^*//6-31G^*).     

DFT法研究3-羟基丙烯醛的双键旋转异构反应机理

利用密度泛函理论(DFT)分别在B3LYP/6-31G**和B3LYP/6-311＋＋G**的计算水平上优化了基态3-羟基丙烯醛分子在双键旋转异构反应过程中的平衡态以及过渡态的几何构型，分析了反应过程中键参数的变化，计算了该反应的内禀反应坐标(IRC)，发现在重排反应途径上存在一个四元环骨架的中间体.通过振动分析对平衡态和过渡态进行了确认，并得到了零点能.计算结果表明，基态3-羟基丙烯醛分子的双键旋转异构反应经过两步完成，第一步反应位垒稍高，第二步反应位垒较低，存在着发生重排反应的可能性.     

吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

Theoretical study on the mechanism of cycloaddition reaction between dimethyl germylidene and formaldehyde

The cycloaddition mechanism of the reaction between singlet dimethyl germylidene and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated with CCSD (T)//MP2/6-31G* method. From the potential energy profile, we predict that the cycloaddition reaction between singlet dimethyl germylidene and formaldehyde has two dominant reaction pathways. First dominant reaction pathway consists of three steps: (1) the two reactants (R1, R2) firstly form an intermediate INT1a through a barrier-free exothermic reaction of 43.0 kJ/mol; (2) INT1a then isomerizes to a four-membered ring compound P1 via a transition state TS1a with an energy barrier of 24.5 kJ/mol; (3) P1 further reacts with formaldehyde(R2) to form a germanic heterocyclic compound INT3, which is also a barrier-free exothermic reaction of 52.7 kJ/mol; Second dominant reaction pathway is as following: (1) the two reactants (R1, R2) firstly form a planar four-membered ring intermediate INT1b through a barrier-free exothermic reaction of 50.8 kJ/mol; (2) INT1b then isomerizes to a twist four-membered ring intermediate INT1.1b via a transition state TS1b with an energy barrier of 4.3 kJ/mol; (3) INT1.1b further reacts with formaldehyde(R2) to form an intermediate INT4, which is also a barrier-free exothermic reaction of 46.9 kJ/mol; (4) INT4 isomerizes to a germanic bis-heterocyclic product P4 via a transition state TS4 with an energy barrier of 54.1 kJ/mol.     

Theoretical studies on the gas-phase pyrolysis of 2-phenoxycarboxylic acids: an ONIOM approach

Various ONIOM combinations-ONIOM(HF/6-31G*: PM3), ONIOM(B3LYP/6-31G*: PM3), ONIOM(MP2/6-31G*: PM3), and ONIOM(MP2/6-31G*: HF/3-21G)--were applied to investigate thermal decomposition mechanisms of four 2-phenoxycarboxylic acids (2-phenoxyacetic acid, 2-phenoxypropionic acid, 2-phenoxybutyric acid, and 2-phenoxyisobutyric acid) in the gas phase. All the transition states and intermediates of the reaction paths were optimized. The reaction pathway of four reactants yielding the phenol, CO, and the corresponding carbonyl compound was characterized on the potential energy surface and found to proceed stepwise. The first step corresponds to the elimination of phenol and the formation of alpha-lactone intermediate through a five-membered ring transition state, and the second step is the cycloreversion process of alpha-lactone intermediate to form CO and the corresponding carbonyl compound. The reaction pathway of latter three compounds to produce the carboxylic acid and phenol via a four-membered cyclic transition structure was also examined theoretically. Comparison with experiment indicates that the activation parameters for the fist reaction channel are accurately predicted at the ONIOM(MP2/6-31G*: HF/3-21G) level of theory.     

Rearrangement of azirine intermediates to nitriles: Theoretical study of cleavage of 3,4-dihydro-1aH-azirine[2,3-c]pyrrol-2-one to cyanoketene–formaldimine complex

A detailed investigation of the reaction path for the thermal rearrangement of 3,4-dihydro-1aH-azirine[2,3-c]pyrrol-2-one to yield a cyanoketene–formaldimine complex is carried out at the MP2/6-31G* and B3LYP/6-31G* levels of theory. The ring opening of the five-membered pyrrolinone ring and the formation of the nitrile group takes place in a concerted manner, presenting a significant strain energy release and allowing for an electronic stabilization by coarctate conjugation of the transition structure (TS). These two factors make possible a moderate energy barrier. Although the structural features B3LYP/6-31G* theoretical levels, it is found that the MP2 energy barrier (28.8) CCSD(T)/6-31G*//MP2/6-31G* value (17.1 kcal/mol). The complex electronic rearrangement can be rationalized using the theory of coarctate transition structures developed by Herges as the evolution of an azirine structure without referring to a hypothetical vinyl nitrene intermediate. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 912–922, 1998     

Ab initio Study of Mechanism of Forming Germanic Hetero-Polycyclic Compound between Germylene Carbene (H2Ge=C: ) and Formaldehyde

The mechanism of the cycloaddition reaction of forming germanic hetero‐polycyclic compound between singlet germylene carbene and formaldehyde has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD (T)//MP2/6‐31G* method. From the potential energy profile, we predict that the cycloaddition reaction of forming germanic hetero‐polycyclic compound between singlet germylene carbene and formaldehyde has two competitive dominant reaction pathways. First dominant reaction pathway consists of four steps: (1) the two reactants (R1, R2) first form an intermediate (INT1) through a barrier‐free exothermic reaction of 117.5 kJ/mol; (2) intermediate (INT1) then isomerizes to a four‐membered ring compound (P2) via a transition state (TS2) with an energy barrier of 25.4 kJ/mol; (3) four‐membered ring compound (P2) further reacts with formaldehyde (R2) to form an intermediate (INT3), which is also a barrier‐free exothermic reaction of 19.6 kJ/mol; (4) intermediate (INT3) isomerizes to a germanic bis‐heterocyclic product (P3) via a transition state (TS3) with an energy barrier of 5.8 kJ/mol. Second dominant reaction pathway is as follows: (1) the two reactants (R1, R2) first form an intermediate (INT4) through a barrier‐free exothermic reaction of 197.3 kJ/mol; (2) intermediate (INT4) further reacts with formaldehyde (R2) to form an intermediate (INT5), which is also a barrier‐free exothermic reaction of 141.3 kJ/mol; (3) intermediate (INT5) then isomerizes to a germanic bis‐heterocyclic product (P5) via a transition state (TS5) with an energy barrier of 36.7 kJ/mol.     

二氟硅烯与甲醛环加成反应机理的理论研究

The mechanism of the cycloadditohn reaction of singlet difluorosilylene with formaldehyde have been studied by RHF/6-311G* gradient method. The electron correlation energy corrections of energies for all the structures were computed using second-order Moller-Plesset perturbation theory(MP2). The results show that this reaction proceeds via two steps:1)Difluorosilylene and formaldehyde form an intermediate complex, it is an exothermal reaction with no barrier.2) The intermediate complex isomerizes to form the product, after being corrected by zero-point energies, the barrier is 127.28 kJ•mol-1 (MP2/6-311G* 6-311G*).     

亚硝基苯与甲醛的反应机理和溶剂效应的理论研究

采用密度泛函理论方法RB3LYP/6-311＋＋G(d,p)研究了亚硝基苯与甲醛在单重态势能面上分别在气相和溶剂中的反应机理. 找到两条反应通道: 协同机理和分步机理, 均生成实验产物N-苯基氧肟酸C6H5NOHCHO. 计算结果表明: 亚硝基苯与甲醛在气相中分步机理为主要通道. 采用导电极化连续介质模型研究了反应体系在水、乙醇、乙腈、二氯甲烷、四氢呋喃、环己烷溶液中反应的溶剂化效应, 这些溶剂可降低反应的活化能, 但反应对溶剂的极性不敏感. 无论在气相还是溶剂中, 亚硝基苯与甲醛的分步机理为优势通道.     

Gas‐phase pyrolysis mechanisms of 3‐anilino‐1‐propanol: Density functional theory study

The gas‐phase pyrolytic decomposition mechanisms of 3‐anilino‐1‐propanol with the products of aniline, ethylene, and formaldehyde or N‐methyl aniline and aldehyde were studied by density functional theory. The geometries of the reactant, transition states, and intermediates were optimized at the B3LYP/6‐31G (d, p) level. Vibration analysis was carried out to confirm the transition state structures, and the intrinsic reaction coordinate method was performed to search the minimum energy path. Four possible reaction channels are shown, including two concerted reactions of direct pyrolytic decomposition and two indirect channels in which the reactant first becomes a ring‐like intermediate, followed by concerted pyrogenation. One of the concerted reactions in the direct pyrolytic decomposition has the lowest activation barrier among all the four channels, and so, it occurs more often than others. The results appear to be consistent with the experimental outcomes. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

A theoretical study on the mechanism of the addition reaction between carbene and epoxyethane

The mechanism of addition reaction between carbene and epoxyethane has been investigated employing the MP2 and B3LYP/6-311+G* levels of theory. Geometry optimization, vibrational analysis, and energy property for the involved stationary points on the potential energy surface have been calculated. Based on the calculated results at the MP2/6-311+G* level of theory, it can be predicted that there are two reaction mechanisms (1) and (2). In the first reaction carbene attacks the atom O of epoxyethane to form an intermediate 1a (IM1a), which is a barrier-free exothermic reaction. Then, IM1a can isomerize to IM1b via a transition state 1a (TS1a), where the potential barrier is 48.6 kJ/mol. Subsequently, IM1b isomerizes to a product epoxypropane (Pro1) via TS1b with a potential barrier of 14.2 kJ/mol. In the second carbene attacks the atom C of epoxyethane firstly to form IM2 via TS2a. Then IM2 isomerizes to a product allyl alcohol (Pro2) via TS2b with a potential barrier of 101.6 kJ/mol. Correspondingly, the reaction energies for the reactions (1) and (2) are −448.4 and −501.6 kJ/mol, respectively. Additionally, the orbital interactions are also discussed for the leading intermediate. The results based on the B3LYP/6-311+G* level of theory are paralleled to those on the MP2/6-311+G* level of theory. Furthermore, the halogen and methyl substituent effects of H₂C: on the two reaction mechanisms have been investigated. The calculated results indicate that the introductions of halogen or methyl make the addition reaction difficult to proceed.     

Ab initio study on the mechanism of forming a germanic hetero-polycyclic compound between alkylidenegermylene and ethylene

The mechanism of the cycloaddition reaction of forming a germanic hetero-polycyclic compound between singlet alkylidenegermylene and ethylene has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6-31G* method. From the surface energy profile, it can be predicted that the dominant reaction pathway for this reaction consists of three steps: the two reactants first form a three-membered ring intermediate INT1 through a barrier-free exothermic reaction of 35.4 kJ/mol; this intermediate then isomerizes to an active four-membered ring product P2.1 via a transition-state TS2.1 with a barrier of 57.6 kJ/mol; finally, P2.1 further reacts with ethylene to form the germanic hetero-polycyclic compound P3, for which the barrier is only 0.8 kJ/mol. The rate of this reaction path considerably differs from other competitive reaction paths, indicating that the cycloaddition reaction has an excellent selectivity.     

DFT Thermodynamic Research of the Pyrolysis Mechanism of the Carbon Matrix Precursor Toluene for Carbon Material

IntroductionAs far as the carbon matrix precursor for carbon material is concerned, the pyrolysis car-bonization mechanism and initial pyrolysis carbonization reaction process are still a field notfully to be understood and to be studied[l--3J. This kind of research is very important for effi-ciently utilizing the organic substance sources and developing new carbon materials (carbon/carbon composite, carbon fiber, graphic material for atomic reactor, medical carbon materialand graphic e1ectrod…     

单重态二溴卡宾和甲醛环加成反应的量化研究

采用量子化学密度泛函理论,研究了单重态二溴卡宾和甲醛环加成反应的机理.在B3LYP/6-31G*基组水平上,优化得到了反应途径上反应物、过渡态、中间体和产物的几何构型;计算并考察了四种可能反应途径势能面上各驻点的构型参数、振动频率和能量;通过振动分析对过渡态和中间体构型进行了确认.计算结果表明,二溴卡宾和甲醛反应有四条反应通道,其中c反应通道(即0°-0°型)控制步骤的活化能仅为13.7 kJ·mol－1,反应容易进行.     

Quantum mechanical study of the ring-closing reaction of the hexatriene radical cation

The ring-closing reaction of hexatriene radical cation 1(*)(+) to 1,3-cyclohexadiene radical cation 2(*)(+) was studied computationally at the B3LYP/6-31G* and QCISD(T)/6-311G*//QCISD/6-31G* levels of theory. Both, concerted and stepwise mechanisms were initially considered for this reaction. Upon evaluation at the B3LYP level of theory, three of the possible pathways-a concerted C(2)-symmetric via transition structure 3(*)(+) and stepwise C(1)-symmetric pathways involving three-membered ring intermediate 5(*)(+) and four-membered ring intermediate 6(*)(+)-were rejected due to high-energy stationary points along the reaction pathway. The two remaining pathways were found to be of competing energy. The first proceeds through the asymmetric, concerted transition structure 4(*)(+) with an activation barrier E(a) = 16.2 kcal/mol and an overall exothermicity of -23.8 kcal/mol. The second pathway, beginning from the cis,cis,trans rotamer of 1(*)(+), proceeds by a stepwise pathway to the cyclohexadiene product with an overall exothermicity of -18.6 kcal/mol. The activation energy for the rate-determining step in this process, the formation of the intermediate bicyclo[3.1.0]hex-2-ene via transition structure 9(*)(+), was found to be 20.4 kcal/mol. More rigorous calculations of a smaller subsection of the potential energy hypersurface at the QCISD(T)//QCISD level confirmed these findings and emphasized the importance of conformational control of the reactant.     

A computational study of the cycloaddition of thiobenzophenone S-methylide to thiobenzophenone

The cycloaddition of thiobenzophenone S-methylide to thiobenzophenone, an experimentally well-known reaction, was studied, using (U)HF/3-21G* for finding stationary points and (U)B3LYP/6-31G*//(U)HF/3-21G* single-point calculations for energies. Some optimizations were performed by (U)B3LYP/ 6-31G* to check the reliability of the calculations. The comparison of the concerted pathways and stepwise reactions via C,C-biradicals and C,S-zwitterions showed that the formation of a tetraphenyl-substituted C,C-biradical and its ring closure to 4,4,5,5-tetraphenyl-1,3-dithiolane constitutes the energetically most probable pathway of product formation, despite the fact that the regioisomeric 2,2,4,4-tetraphenyl-substituted product is more favorable by 17 kcal mol(-1). Model calculations on bond dissociation energies showed that (U)B3LYP with various basis sets overestimates radical stabilization, whereas CBS-QB3 closely reproduced experimental values. Results with the BLYP functional are similar to those with B3LYP. The consequences of the overestimation of radical stability for the cycloaddition mechanism involving biradicals are discussed. Thiobenzophenone S-methylide, if not captured by a dipolarophile, dimerizes to 2,2,3,3-tetraphenyl-1,4-dithiane. Calculation disclosed likewise a tetraphenyl-substituted C,C-biradical as intermediate.