Efficient conversion of fructose to 5‐hydroxymethylfurfural by functionalized γ‐Al2O3 beads

Millimeter size γ‐Al₂O₃ beads were prepared by alginate assisted sol–gel method and grafting organic groups with propyl sulfonic acid and alkyl groups as functionalized γ‐Al₂O₃ bead catalysts for fructose dehydration to 5‐hydroxymethylfurfural (5‐HMF). Experiment results showed that the porous structure of γ‐Al₂O₃ beads was favorable to the loading and dispersion of active components, and had an obvious effect on the properties of the catalyst. The lower calcination temperature of γ‐Al₂O₃ beads increased the specific surface area, the hydrophobicity and the activity of catalysts. Competition between the reaction of alkyl groups and ‐SH groups with surface hydroxyl during the preparation process of the catalyst influenced greatly the acid site densities, hydrophobic properties and activity of the catalyst. With an increase in the alkyl group chain, the hydrophobicity of catalysts increased obviously and the activity of the catalyst was enhanced. The most hydrophobic catalyst C₁₆‐SO₃H‐γ‐Al₂O₃–650°C exhibited the highest yield of 5‐HMF (84%) under the following reaction conditions: reaction medium of dimethylsulfoxide/H₂O (V/V, 4:1), catalyst amount of 30 mg, temperature of 110°C and reaction time of 4 hr.     

Perylene diimide‐modified magnetic γ‐Fe2O3/CeO2 nanoparticles as peroxidase mimics for highly sensitive colorimetric detection of Vitamin C

Perylene diimide‐modified magnetic γ‐Fe₂O₃/CeO₂ nanoparticles (γ‐Fe₂O₃/CeO₂‐PDI) were prepared and exhibited excellent peroxidase‐like activity. The samples were characterized by HR‐TEM, XRD, Raman, N₂ adsorption, magnetic strength and XPS. The obtained γ‐Fe₂O₃/CeO₂‐PDI had size of 10~20 nm with high specific surface area of 77 m²/g, and could be easily separated from the aqueous solution by using a magnet, which are in favor of its practical application. Due to the decoration of PDI, the γ‐Fe₂O₃/CeO₂‐PDI possessed more surface defects (Ce³⁺) and active oxygen species than that of γ‐Fe₂O₃/CeO₂, resulting in the outstanding catalytic performance. And the composite catalyst also showed highly sensitive and selectivity toward VC with a limit of detection of 0.45 μM. Based on the fluorescent results, a possible hydroxyl radical (?OH) catalytic mechanism was proposed. It is believed that the as‐prepared γ‐Fe₂O₃/CeO₂‐PDI nanoparticles are promising biosensors applied for biomedical and food analysis.     

Vapor‐Phase Aldolization of n‐Butyraldehyde to 2‐Ethyl‐2‐Hexenal over Solid‐Base Catalysts

Vapor‐phase aldol condensation of n‐butyraldehyde to 2‐ethyl‐2‐hexenal was studied at 1 atm and 150～ 300°C in a fixed‐bed, integral‐flow reactor by using NaX, KX, γ‐Al₂O₃ and Na/NaOH/γ‐Al₂CO₃ catalysts. Ion exchange of NaX zeolite with potassium acetate solution results in a decrease of crystallinity and apparent lowering of surface area, whereas the basic strength is enhanced. Treatment of γ‐Al₂O₃ with NaOH and Na causes a large decrease of the surface area but strong enhancement of the catalyst basicity. The catalytic activity on the basis of unit surface area is in the order Na/NaOH/γ‐Al₂O₃ < KXU < KXW < NaX >γ‐Al₂O₃, in accordance with the relative catalyst basic strength. The molar ratio of trimeric to dimeric products increases with increasing the reaction temperature and the catalyst basic strength except for Na/NaOH/γ‐Al₂O₃. Very high selectivity of 2‐ethyl‐2‐hexenal (>98.5%) was observed for reactions over NaX zeolite at 150°C. Based on the FT‐IR and the catalytic results, the reaction paths are proposed as follows: self‐aldol condensation of n‐butyraldehyde, followed by dehydration produces 2‐ethyl‐2‐hexenal, which then reacts with n‐butyraldehyde and successively dehydrates to 2,4‐diethyl‐2,4‐octadienal and 1,3,5‐triethylbenzene. For the reaction over NaX, the calculated Arrhenius frequency factor and activation energy are 314 mol/g·h and 32.6 kJ/mol, respectively.     

Silver,iron, and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 MNPs catalyzed one‐pot five‐component reactions for the synthesis of tetrahydropyridines by tandem condensation of amines,aldehydes, and methyl acetoacetate

In this study, Ag, Ni²⁺, and Fe²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ nanoparticles (γ‐Fe₂O₃@HAp‐Ag, γ‐Fe₂O₃@HAp‐Ni²⁺, and γ‐Fe₂O₃@HAp‐Fe²⁺) as a new and reusable Lewis acid magnetic nanocatalyst was successfully synthesized and reported for an atom economic, extremely facile, and environmentally benign procedure for the synthesis of highly functionalized tetrahydropyridines derivatives 4a‐t is described by one‐pot five‐component reaction of 2 equiv of aldehydes 1 , 2 equiv of amines 2 , and 1 equiv of methyl acetoacetate 3 in EtOH at room temperature in good to high yields and short reaction time. The presented methodology offers several advantages such as easy work‐up procedure, reusability of the magnetic nanocatalyst, operational simplicity, green synthesis avoiding toxic reagents and solvent, mild reaction conditions, and no tedious column chromatographic separation.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Characterization and Activity of MnO/γ‐Al2O3 for Hydrogenation of Methyl Benzoate to Benzaldehyde

The activities of a MnO/γ‐Al₂O₃ catalyst for the selective reduction of methyl benzoate to benzaldehyde have been studied in a continuous flow reactor. Characterization of the catalyst has been conducted by XRD, XPS, NH₃‐TPD and TPD‐IR. XRD and XPS results revealed that the steady state catalyst is mainly MnO₂/γ‐AlO₃ before reduction and MnO/γ‐Al₂O₃ after reduction. Monolayer dispersion capacity obtained by XPS method is about w (Mn)11.3% TPD‐IR results revealed that there are only L acidic centers on the catalytic surface. NH₃‐TPD determinations have verified that the catalyst with a certain number of moderate strength acidic sites is advantageous to hydrogenation of methyl benzoate to benzaldehyde.     

Characterization and Activity of Cu‐MnOx/γ‐Al2O3 Catalyst for Hydrogenation of Carbon Dioxide

The effect of manganese on the dispersion, reduction behavior and active states of surface of supported copper oxide catalysts have been investigated by XRD, temperature‐programmed reduction and XPS. The activity of methanol synthesis from CO₂/H₂ was also investigated. The catalytic activity over CuO‐MnO_x/γ‐Al₂O₃ catalyst for CO₂ hydrogenation is higher than that of CuO/γ‐Al₂O₃. The adding of manganese is beneficial in enhancing the dispersion of the supported copper oxide and make the TPR peak of the CuO‐MnK_x/γ‐Al₂O₃ catalyst different from the individual supported copper and manganese oxide catalysts, which indicates that there exists strong interaction between the copper and manganese oxide. For the CuO/γ‐Al₂O₃ catalyst there are two reducible copper oxide species; α and β peaks are attributed to the reduction of highly dispersed copper oxide species and bulk CuO species, respectively. For the CuO‐MnO_x/γ‐Al₂O₃ catalyst, four reduction peaks are observed, α peak is attributed to the dispersed copper oxide species; β peak is ascribed to the bulk CuO; γ peak is attributed to the reduction of high dispersed CuO interacting with manganese; δ peak may be the reduction of the manganese oxide interacting with copper oxide. XPS results show that Cu⁺ mostly existed on the working surface of the Cu‐Mn/γ‐Al₂O₃ catalysts. The activity was promoted by Cu with positive charge which was formed by means of long path exchange function between Cu? O? Mn. These results indicate that there is synergistic interaction between the copper and manganese oxide, which is responsible for the high activity of CO₂ hydrogenation.     

Study on the mechanism of catalytic synthesis of dimethyldichlorosilane by AlCl3/MIL‐53(Al)@γ‐Al2O3

Dimethyldichlorosilane, one of the most consumed organosilicon monomers in the industry, can be prepared in a highly efficient and environmentally friendly synthesis method of disproportionating methylchlorosilanes. However, the internal mechanism of the reaction remains unclear. In this paper, the mechanism catalyzed by AlCl₃/MIL‐53(Al) and AlCl₃/MIL‐53(Al)@γ‐Al₂O₃ catalysts was calculated at B3LYP/6‐311++G(3df, 2pd) level by using the density functional theory (DFT). The results showed that although the two catalysts had similar active structures, the catalytic effects were significantly different. The Lewis acid center on the surface of γ‐Al₂O₃ in the core‐shell catalyst is complementary to the classic Lewis acid AlCl₃ through the spatial superposition effect, which greatly improves the Lewis acid catalytic activity of AlCl₃/MIL‐53(Al)@γ‐Al₂O₃.     

Location of the Spinel Vacancies in γ‐Al2O3

A non‐spinel model for the structure of γ‐Al₂O₃, with 25 % of the Al³⁺ cations at tetrahedral positions, has been the subject of wide interest. However, ¹⁷O NMR measurements and, more recently, ²⁷Al NMR measurements have shown that there are considerably more Al³⁺ cations at tetrahedral positions. This means that the Al³⁺ vacancies in γ‐Al₂O₃ are not at tetrahedral but at octahedral positions, as in isostructural γ‐Fe₂O₃ and in accordance with density functional theory predictions. This has consequences with regard to the surface structure of γ‐Al₂O₃, and thus, for catalysis.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

Effect of Calcination Temperature and Pretreatment with Reaction Gas on Properties of Co/γ‐Al2O3 Catalysts for Partial Oxidation of Methane

The effects of calcination temperature and feedstock pretreatment on the catalytic performance of Co/γ‐Al₂O₃ catalysts were studied for partial oxidation of methane (POM) to synthesis gas, with emphasis on the role of feedstock pretreatment. The physicochemical properties of the catalysts were characterized by N₂ adsorption, X‐ray diffraction (XRD), transmission electron microscopy (TEM), H₂ temperature‐programmed reduction (H₂‐TPR), and Raman spectroscopy. The results showed that the pretreatment of the catalyst by reaction gas significantly improved the catalytic activity and stability for the POM reaction. On the other hand, the effect of calcination temperature was less significant. Although the initial activity was increased by an increased calcination temperature, the catalyst without the feedstock pretreatment suffered a rapid deactivation. The reaction‐atmosphere pretreatment was revealed as a process that mainly modified the surface structure of the catalyst. In that process, the formation of a CoAl₂O₄‐like compound led to high Co metal dispersion after reduction, and the transformation of the carrier into α‐Al₂O₃ occurred over the catalyst surface. Both the high dispersion of cobalt and the presence of α‐Al₂O₃ surface phase were assumed as the important factors resulting in an excellent catalytic performance in terms of high activity and high stability.     

Novel electromagnetic functionalized γ‐Fe2O3/polypyrrole composite nanostructures with high conductivity

In general, the conductivity of polypyrrole (PPy) is reduced by addition of magnetic nanoparticles as the additives owing to insulating effect of magnetic nanoparticles. In this article, novel electromagnetic functionalized PPy composite nanostructures were prepared by a template‐free method associated with γ‐Fe₂O₃ nano‐needles as the hard templates in the presence of p‐toluene‐sulfonic acid (p‐TSA) and FeCl₃·6H₂O as the dopant and oxidant, respectively. It was found that the molar ratio of γ‐Fe₂O₃ to pyrrole monomer represented by [γ‐Fe₂O₃]/[Py] ratio strongly affected the morphology and the conductivity of the γ‐Fe₂O₃/PPy composite nanostructures. A growth mechanism for the composite nanostructures was proposed based on the variance of the morphology with the [γ‐Fe₂O₃]/[Py] ratio. Compared with previously reported γ‐Fe₂O₃/PPy composites, the as‐prepared novel composite nanostructures showed much higher conductivity (up to ～50 times higher). Moreover, the synthesized γ‐Fe₂O₃/PPy composite nanostructures displayed ferromagnetic behavior with a high coercive force. Explanations for these interesting observations were made in terms of the magnetic interaction between ferromagnetic γ‐Fe₂O₃ nano‐needles and spin‐polaron of PPy nanotubes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4446–4453, 2009     

Nano n‐propylsulfonated γ‐Al2O3: a new,efficient and reusable catalyst for synthesis of spiro[indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media

Nano n‐propylsulfonated γ‐Al₂O₃ is easily prepared by the reaction of nano γ‐Al₂O₃ with 1,3‐propanesultone. This reagent can be used as an efficient catalyst for the synthesis of spiro [indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media. This new method consistently has the advantages of excellent yields and short reaction times. Further, the catalyst can be reused and recovered several times. Copyright © 2013 John Wiley & Sons, Ltd.     

Physicochemical and Reactivity Studies on Polystyrene‐Cu/Al2O3 Catalysts: An Attempt to Control Copper Dispersion

The influence of coating of 5.0 (w/w%) Cu/γ‐Al₂O₃ catalyst by different ratios of polystyrene on the physicochemical and textural properties was studied. The physicochemical and textural properties of polystyrene‐`Cu/γ‐Al₂O₃ catalysts were investigated by N₂ adsorption, O₂ chemisorption, FTIR, XRD, TEM, and SEM. In addition, the kinetics of H₂O₂ decomposition as a model redox reaction over polymer coated and uncoated catalysts was investigated. The highest activity was achieved by 0.06 wt% polystyrene‐5.0Cu/γ‐Al₂O₃ catalyst. The parent 5.0Cu/γ‐Al₂O₃ catalyst showed auto‐catalytic first order mechanism, which was subjected to a pronounced modification to a simple first order one upon coating by polystyrene. This modification in the mechanism was accompanied with an increase in the apparent activation energy of the reaction. The observed high activity of 0.06 wt% polystyrene‐5.0Cu/γ‐Al₂O₃ catalyst was attributed to the role of polymer in enhancement of the degree of dispersion of the surface copper. However, the modification in kinetics of the reaction was attributed to the difference in the nature of Cu active sites namely, the polymer protected the metallic copper species on the surface of γ‐Al₂O₃ support against possible oxidation to copper sub‐oxides and/or that polymer might change the hydrophilic properties of the reaction media.     

Electrochemically Generated γ‐LixV2O5 as Insertion Host for High‐Energy Li‐Ion Capacitors

In this study, we explored the feasibility of using electrochemically generated γ‐Li_xV₂O₅ as an insertion‐type anode in the lithium‐ion capacitor (LIC) with activated carbon (AC) as a cathode. Along with the native form of V₂O₅, their carbon composites are also used as the electrode material which is prepared by high‐energy ball milling. The electrochemical pre‐lithiation strategy is used to generate the desired γ‐phase of V₂O₅ (γ‐Li_xV₂O₅). Under the optimized mass loading conditions, the LICs are assembled with γ‐Li_xV₂O₅ as anode and AC as a cathode in the organic medium. Among the different LICs fabricated, AC/γ‐Li_xV₂O₅‐BM50 configuration delivered an energy density of 33.91 Wh kg^?1 @ 0.22 kW kg^?1 with excellent capacity retention characteristics. However, a dramatic increase in energy density (43.98 Wh kg^?1@0.28 kW kg^?1) is noted after the electrolyte modification with fluoroethylene carbonate. The high temperature performance of the assembled LIC is also studied and found that γ‐Li_xV₂O₅ phase can be used as a potential battery‐type component to construct high‐performance hybrid charge storage devices.     

Time‐Resolved,In Situ DRIFTS/EDE/MS Studies on Alumina‐Supported Rhodium Catalysts: Effects of Ceriation and Zirconiation on Rhodium–CO Interactions

The effects of ceria and zirconia on the structure–function properties of supported rhodium catalysts (1.6 and 4 wt % Rh/γ‐Al₂O₃) during CO exposure are described. Ceria and zirconia are introduced through two preparation methods: 1) ceria is deposited on γ‐Al₂O₃ from [Ce(acac)₃] and rhodium metal is subsequently added, and 2) through the controlled surface modification (CSM) technique, which involves the decomposition of [M(acac)_x] (M=Ce, x=3; M=Zr, x=4) on Rh/γ‐Al₂O₃. The structure–function correlations of ceria and/or zirconia‐doped rhodium catalysts are investigated by diffuse reflectance infrared Fourier‐transform spectroscopy/energy‐dispersive extended X‐ray absorption spectroscopy/mass spectrometry (DRIFTS/EDE/MS) under time‐resolved, in situ conditions. CeO_x and ZrO₂ facilitate the protection of Rh particles against extensive oxidation in air and CO. Larger Rh core particles of ceriated and zirconiated Rh catalysts prepared by CSM are observed and compared with Rh/γ‐Al₂O₃ samples, whereas supported Rh particles are easily disrupted by CO forming mononuclear Rh geminal dicarbonyl species. DRIFTS results indicate that, through the interaction of CO with ceriated Rh particles, a significantly larger amount of linear CO species form; this suggests the predominance of a metallic Rh phase.     

Enhanced epoxidation of soybean oil by novel Al2O3–ZrO2–TiO2 solid acid catalyst

This study aims to develop highly efficient, recyclable solid catalysts for the epoxidation of vegetable oils. An Al₂O₃–ZrO₂–TiO₂ solid acid catalyst was prepared by a co‐precipitation/impregnation method and characterised through scanning electron microscopy, energy‐dispersive spectroscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, Fourier‐transform infrared and nitrogen adsorption–desorption analyses. The solid acid catalyst with a high surface area and typical slit pore adsorption was successfully synthesised. Al₂O₃–ZrO₂–TiO₂ also exhibits high stability and improved catalytic efficiency in the epoxidation of soybean oil. An oil conversion rate of 86.6%, which is higher than that of conventional catalysts, was obtained with a catalyst loading of 0.8 wt% and was maintained at 76.6% even after recycling the catalyst three times. The performance of the solid catalyst was slightly superior to that of H₂SO₄. Therefore, this novel catalyst may potentially be applicable in catalysing soybean oil epoxidation.     

Continuous Dehydrogenation of n‐Pentanol over a Cr Modified Cu/γ‐Al2O3‐La2O3 Catalyst

The oxidant‐free dehydrogenation of n‐pentanol over copper based catalysts was investigated in this paper. The effect of metal modification on the activity and stability of the copper catalyst supported on γ‐Al₂O₃ and La₂O₃ (Cu/γ‐Al₂O₃‐La₂O₃) was clarified and a Cr modified Cu/Al₂O₃‐La₂O₃ (Cu‐Cr/γ‐Al₂O₃‐La₂O₃) showed the best catalytic performance. The conversion of n‐pentanol was 70.0% and the selectivity for n‐pentanal increased to 97.1% over Cu‐Cr/γ‐Al₂O₃‐La₂O₃. X‐ray diffraction and temperature programmed reduction of H₂ indicated that the addition of Cr favors the formation and reduction of the copper oxide, and the dispersion of the active Cu⁰ species, accounting for the good activity and stability of this catalyst. Furthermore, the lower amount of acidic sites in Cu‐Cr/γ‐Al₂O₃‐La₂O₃ is suggested to suppress the dehydration in oxidant‐free dehydrogenation of n‐pentanol, accounting for the higher selectivity for n‐pentanal.     

Understanding the Effect Models of Ionic Liquids in the Synthesis of NH4‐Dw and γ‐AlOOH Nanostructures and Their Conversion into Porous γ‐Al2O3

Well‐dispersed ammonium aluminum carbonate hydroxide (NH₄‐Dw) and γ‐AlOOH nanostructures with controlled morphologies have been synthesized by employing an ionic‐liquid‐assisted hydrothermal process. The basic strategies that were used in this work were: 1) A controllable phase transition from NH₄‐Dw to γ‐AlOOH could be realized by increasing the reaction temperature and 2) the morphological evolution of NH₄‐Dw and γ‐AlOOH nanostructures could be influenced by the concentration of the ionic liquid. Based on these experimental results, the main objective of this work was to clarify the effect models of the ionic liquids on the synthesis of NH₄‐Dw and γ‐AlOOH nanostructures, which could be divided into cationic‐ or anionic‐dominant effect models, as determined by the different surface structures of the targets. Specifically, under the cationic‐dominant regime, the ionic liquids mainly showed dispersion effects for the NH₄‐Dw nanostructures, whereas the anionic‐dominant model could induce the self‐assembly of the γ‐AlOOH particles to form hierarchical structures. Under the guidance of the proposed models, the effect of the ionic liquids would be optimized by an appropriate choice of cations or anions, as well as by considering the different effect models with the substrate surface. We expect that such effect models between ionic liquids and the target products will be helpful for understanding and designing rational ionic liquids that contain specific functional groups, thus open up new opportunities for the synthesis of inorganic nanomaterials with new morphologies and improved properties. In addition, these as‐prepared NH₄‐Dw and γ‐AlOOH nanostructures were converted into porous γ‐Al₂O₃ nanostructures by thermal decomposition, whilst preserving the same morphology. By using HRTEM and nitrogen‐adsorption analysis, the obtained γ‐Al₂O₃ samples were found to have excellent porous properties and, hence, may have applications in catalysis and adsorption.