Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Molecular Design of Calixarene 5. Syntheses and Cation Selectivities of Novel Schiff's Base p‐tert‐Butylcalix[4]arenes

Five novel Schiff's bases p‐tert‐butylcalix[4]arenes have been synthesized in high yields by the reaction of 1,3‐distally disubstituted p‐tert‐butylcalix[4]arene amine (1) with the corresponding aromatic aldehydes, and their cation binding abilities and selectivities with alkali and heavy metal ions have been evaluated by solvent extraction of aqueous metal picrates to show the highest Ag⁺ extractability for Schiff's base p‐tert‐butylcalix[4]arene (6) and the best Na⁺/Li⁺ and Ag⁺/Ti⁺ selectivities for Schiff's base p‐tert‐butylcalix[4]arene (4 and 2) over any other calix[4]arene derivatives, respectively.     

One‐Step Synthesis of Singly Bridged Biscalix[4]arenes with Oligooxyethyleneethyl Spacers

Here we describe the one‐step synthesis of a series of singly bridged biscalix[4]arene derivatives connected by ethylene or oligooxyethyleneethyl chain through the reaction of calix[4]arene with corresponding ethylene or oligoethylene glycol ditosylates in the presence of sodium hydride in toluene. A 1,2‐bis(ethylene) doubly bridged bis‐p‐tert‐butylcalix[4]arene was also obtained as a by‐product.     

Influences of Hard Donor on Cation Selectivities Closing to Soft Selenium Donor in Tweezer-like Calix[4]arene Receptors

Three novel 25,27-dihydroxy-26,28-bis(3-benzylselenopropoxy)-5,11,17,23-tetra-tert-butylcalix[4]-arene (2),25,27-dihydroxy-26,28-bis[3-(2-hydroxyethylseleno)propoxy]-5,11,17,23-tetra-tert-butyl-calix[4]arene (3) and 25,27-dihydroxy-26,28-bis(3-propylselenoproppxy)-5,11,17,23-tetra-tert-butyl-calix[4]arene (4) were synthesized for the comparison of their ion-selectivity in ion-selective electrodes (ISE). X-ray structure of the CH/π complex of 4.CH2Cl2 was elucidated. ISEs based on 2-4 as neutral ionophores were prepared, and their selectivity coefficients for Ag (logKAg,M^pot) were investigated against some main group metal ions and transition metal ones using the fixed interference method (FIM). These ISEs showed excellent Ag^ selectivity over most of the interfering cations examined. It is evident that the stronger Hg^2 interference may not be produced while hard donors (hydroxy) are close to the soft selenium donors.     

一对含有苯甲醛基修饰的杯芳烃异构体的晶体结构以及它们与铽离子配位的光物理性质

Two calix[4]arene isomers with benzaldehyde moieties, i.e., 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(o-formyl-phenoxy)ethoxy]-26,28-dihydroxycalix[4]arene (3) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(p-formylphenoxy)-ethoxy]-26,28-dihydroxycalix[4]arene (4), were synthesized according to a newly designed route in high yields, and their crystal structures have been determined by X-ray crystallographic study. The photophysical behavior on complexation of calix[4]arene derivatives 3 and 4 with terbium(Ⅲ) nitrate was investigated in anhydrous acetonitrile at 25℃ by UV-Vis and fluorescence spectroscopies. The crystallographic structure of 3 indicated that the eight oxygen atoms formed a preorganized ionophoric cavity due to intramolecular π-π stacking, which could encapsulate lanthanide ions tightly. In sharp contrast, the compound 4 formed a linear array by intermolecular π-π stacking, hence the oxygen atoms of pendant arms could not coordinate with metal ions, giving a poor binding ability to Tb^3 . The absorption spectra of 3 with Tb^3 showed clearly a new broad intense absorption at 385nm. Interestingly, the narrow emission line spectrum has also been observed for compound 3 with Tb^3 , and the results obtained were discussed from the viewpoint of energy transfer mechanism between host structures and the properties of lanthanide ions.     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

Two related lithium calixarene complexes, [p‐tert‐butylcalix[4]arene(OMe)(OH)2(OLi)]2·4MeCN and {p‐tert‐butylcalix[4]arene(OH)2(OLi)[OLi(NCMe)2]}2·8MeCN,determined using synchrotron radiation

The crystal structures of acetonitrile solvates of two related lithium calixarene complexes have been determined by low‐temperature single‐crystal X‐ray diffraction using synchrotron radiation. Bis(μ‐5,11,17,23‐tetra‐tert‐butyl‐26,28‐dihydroxy‐25‐methoxy‐27‐oxidocalix[4]arene)dilithium(I) acetonitrile tetrasolvate, [Li₂(C₄₅H₅₇O₄)₂]·4C₂H₃N or [p‐tert‐butylcalix[4]arene(OMe)(OH)₂(OLi)]₂·4MeCN, (I), crystallizes with the complex across a centre of symmetry and with four molecules of unbound acetonitrile of crystallization per complex. Tetraacetonitrilebis(μ‐5,11,17,23‐tetra‐tert‐butyl‐26,28‐dihydroxy‐25,27‐dioxidocalix[4]arene)tetralithium(I) acetonitrile octasolvate, [Li₄(C₄₄H₅₄O₄)₂(C₂H₃N)₄]·8C₂H₃N or {p‐tert‐butylcalix[4]arene(OH)₂(OLi)[OLi(NCMe)₂]}₂·8MeCN, (II), also crystallizes with the complex lying across a centre of symmetry and contains eight molecules of unbound acetonitrile per complex plus four more directly bound to two of the lithium ions, two on each ion. The cores of both complexes are partially supported by O—H...O hydrogen bonds. The methoxy methyl groups in (I) prevent the binding of any more than two Li⁺ ions, while the corresponding two O‐atom sites in (II) bind an extra Li⁺ ion each, making four in total. The calixarene cone adopts an undistorted cone conformation in (I), but an elliptical one in (II).     

对叔丁基杯[10]冠醚的合成

首次合成一系列杯[10]冠醚。通过将对叔丁基杯[10]芳烃和乙二醇双对甲苯磺酸酯或多甘醇双对甲苯磺酸酯在K2CO3/甲苯或Cs2CO3/丙酮体系中反应,得到一系列杯[10]冠醚:1,2-杯[10]冠-4、1,3-杯[10]冠-2、1,2-,1,3-杯[10]冠-3、1,4-杯[10]冠-4、和1,6-杯[10]冠-4。     

下缘芳香取代结构对杯[4]芳烃Langmuir膜的影响

The Langmuir monolayer properties of lower rim aromatically substituted calix[4]arenes, 5,11,17,23-tetra-tert-butyl-25,27-bis（2-naphth-1＇-ylacetylaminoethoxy）-26,28-dihydroxylcalix[4]arene （BNAEC）, 5,11,17,23-tetra-tert- butyl-25,27-bis（2-benzoylamino ethoxy）-26,28-dihydroxylcalix[4]arene （BBAEC） and 5,11,17,23-tetra-tert-butyl- 25,27-bis（2-cinnamoylaminoethoxy）-26,28-dihydroxylcalix[4]arene （BCAEC）, have been studied. Film balance measurements and Brewster angle microscopy （BAM） observation demonstrate that all the compounds can form Langmuir monolayers with different molecular limiting areas. BNAEC or BBAEC monolayer is able to form condensed domains during compression, while BCAEC monolayer can never form condensed domain. BNAEC monolayer is more readily to form condensed domain than BBAEC monolayer. Moreover, BNAEC monolayer can form the total condensed phase during compression even when T=28℃, while BBAEC monolayer can not when T 〉 10 ℃. The results imply that different lower rim aromatic substitutions affect essentially the intermolecular interaction and molecular packing in the monolayer at air/water interface.     

Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Bis‐tert‐Alcohol‐Functionalized Crown‐6‐Calix[4]arene: An Organic Promoter for Nucleophilic Fluorination

A bis‐tert‐alcohol‐functionalized crown‐6‐calix[4]arene (BACCA) was designed and prepared as a multifunctional organic promoter for nucleophilic fluorinations with CsF. By formation of a CsF/BACCA complex, BACCA could release a significantly active and selective fluoride source for S_N2 fluorination reactions. The origin of the promoting effects of BACCA was studied by quantum chemical methods. The role of BACCA was revealed to be separation of the metal fluoride to a large distance (>8 Å), thereby producing an essentially “free” F^?. The synergistic actions of the crown‐6‐calix[4]arene subunit (whose O atoms coordinate the counter‐cation Cs⁺) and the terminal tert‐alcohol OH groups (forming controlled hydrogen bonds with F^?) of BACCA led to tremendous efficiency in S_N2 fluorination of base‐sensitive substrates.     

A,C-Bridged Calix[6]arene： Relationship between the Length of Bridge and Conformation

Three new A,C-diamide bridged p-tert-butylcalix[6]arenes were synthesized from p-tert-butylcalix[6]arenes by bridging ClCH2CONH(CH2)nNHCOCH2Cl(n=3,4,6) in acetonitrile using K2CO3 as a base in 17%-25% yields.It was found that the bridged calix[6]arenes with shorter bridges (n=2,3,4 in N′,N′-bischloroacetodiamines) adopt cone conformation, but the last one (n=6) adopts alternate conformation, i.e., accompanying the lengthening of bridge, the conformation of A,C-bridged calix[6]arenes changes from cone to alternate.     

A New Silver(I) Potentiometric Sensor Based on a Calix[4]arene Substituted at the Narrow Rim by Amide/Phosphoryl Groups

A coated‐wire type silver ion‐selective electrode has been constructed using a modified p‐tert‐butyl‐calix[4]arene by amide‐phosphoryl groups, named 5, 11, 17, 23‐tetra‐tert‐butyl‐25, 27‐bis(diethylcarbamoylmethoxy)‐26,28‐bis(diphenylphosphinoylmethoxy)calix[4]arene (Calix), as neutral carrier. A plasticized PVC membrane containing 30% PVC, 60% ortho‐nitrophenyloctylether (NPOE), 2% sodium tetraphenylborate (NaTPB) and 8% “Calix” was coated on a graphite rod. The prepared electrode exhibited a linear Nernstian response over the range 1 × 10^?6 to 1 × 10^?2 M with a slope 58.4 (±0.2) mV per decade change and a detection limit of 6.3 × 10^?7 M. The working pH range of the sensor is 4‐6.7. It is found that the dynamic response time of the electrode to achieve a steady potential was very fast (～11 s). The selectivity of the sensor relative to NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Pb²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺ and Th⁴⁺ was examined. The prepared electrode exhibits adequate stability with good reproducibility (57.6 ± 0.5 mV per decade change for 10 weeks). It was successfully used as an indicator electrode in potentiometric titration of silver ions with standard solution of EDTA. The sensor was also used for silver ion measurements in various synthetic samples.     

硫酰杯[4]芳烃与铜(II)双核配合物的合成与晶体结构

The X-ray crystallographic structure was reported for a dinuclear copper（Ⅱ） complex with a tetraanionic ligand of p-tert-butylsulfonylcalix[4]arene [Cu2L（CH3OH）6]·4CH3OH （H4L=p-tert-butylsuffonylcalix[4]arene）. The complex belongs to triclinic system, P1^-- space group, with a = 1.2303（3） nm, b = 1.2377（3） nm, c = 1.3110（3） nm, a =66.862（4）°, β= 67.206（4）°, γ=61.711（3）°, Z= 1, V= 1.5659（7） nm^3, Dc= 1.371 g/cm^3, F（000） = 682,μ（Mo Kα） = 0.883 mm^-1, R1 =0.0325, wR2=0.0870. In this complex, the calix[4]arene acts as a bis-tridentate chelating ligand with the 1,2-alternate conformation.     

New Efficient Synthetic Pathways to Tetrakis{p‐[(diethylphosphono)methyl]}calix[4]arene

Various operating conditions have been applied on tetrakis[p‐(halogenomethyl)]‐ and tetrakis[p‐(aminomethyl)]calix[4]arene derivatives to improve the synthesis of the 5,11,17,23‐tetrakis[(diethylphosphono)methyl]‐25,26,27,28‐tetrahydroxycalix[4]arene. Two new, high yield, synthetic pathways have been selected, involving, for the first one, the 25,26,27,28‐tetrahydroxy‐5,11,17,23‐tetrakis[(trimethylamino)methyl]calix[4]arene, tetraiodide, DMF, and 10 equiv. of triethyl phosphite ((EtO)₃P), and, for the other one, the 5,11,17,23‐tetra(bromomethyl)‐25,26,27,28‐tetrahydroxycalix[4]arene, CH₂Cl₂, and only 4 equiv. of (EtO)₂P.     

Design and Synthesis of New Chiral Calix[4]arenes as Liquid Phase Extraction Agents for α-Amino Acid Methylesters and Chiral α-Amines

The article describes the synthesis and extraction properties of new (S)-(-)-1-phenylethylamine substituted p-tert-butylcalix[4]arene/calix[4]arene. These compounds have been synthesized via nucleophilic substitution reactions involving 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra(2-hydroxyethoxy)calix[4]arene (4a), or 5,11,17,23-tetra-H-25,26,27,28-tetra(2-hydroxyethoxy)calix[4]arene (4b) with (S)-(-)-1-phenylethylamine in dry THF. The extraction properties of ligands 5a and 5b towards the some selected α-amino acid methylesters and chiral α-amines are also reported. It has been observed that receptor 5a was an excellent ionophore for α-amino acid methylesters/α-amines and good extractant than 5b. However, both of the ligands did not display any selectivity towards the configurations of this species. in final form: 17 January 2005