Cross‐Linked Conjugated Polymers for Achieving Patterned Three‐Color and Blue Polymer Light‐Emitting Diodes with Multi‐Layer Structures

Reactions between the ethylene groups in the backbone of conjugated polymers under UV illumination and heat treatment result in the cross‐linking of the main polymer chains. The cross‐linking leads to two simultaneous results in the polymer: excellent solvent resistance and increased bandgap. Using this reaction, three‐color polymer light‐emitting diodes (PLEDs) with a multi‐layer structure can be easily realized by a dry photo‐pattern in an active‐gas‐free environment. Multi‐layer blue devices with dramatically enhanced efficiency can also be achieved conveniently.

     

Rapid UV Light‐Triggered Macromolecular Click Conjugations via the Use of o‐Quinodimethanes

Shining a light on click chemistry: The use of UV‐radiation as trigger signal provides a facile means to obtain spatial and temporal control over polymer conjugation reactions in addition to providing a further means of achieving orthogonality in click transformations. In the current contribution, UV‐radiation was employed to induce a highly efficient Diels–Alder conjugation of polymeric building blocks via the photo‐induced in situ formation of highly reactive cis‐dienes from a 2‐methylbenzophenone precursor.

     

N‐Alkylation of imides using phase transfer catalysts under solvent‐free conditions

N‐Alkylation of imides in the reaction of imides and alkylhalides, catalyzed by PT catalysts under solvent‐free conditions, has been developed. The reaction occurs in the presence of K₂CO₃, and in many cases it takes place spontaneously. In the N‐benzylation reaction, it has been recognized that TBAB (tetrabutylammonium bromide) and TBATFB (tetrabutylammonium tetrafluoroborate) show highest catalytic effect. Versatility and synthetic capacity of the solvent‐free alkylation has been confirmed by N‐benzylation and N‐ethylation of various imides. The developed procedure gives easy access to N‐(ω‐bromoalkyl)imides.     

Mesogen‐Free Supramolecular Liquid Crystalline State Formed by a Polyelectrolyte/Amphiphile Complex

Summary: The microstructure and phase transformation of a highly‐branched polyethyleneimine/octadecanoic acid (PEI(OA)_1.0) complex were investigated using a combination of DSC, XRD, optical polarised microscopy and temperature dependent FT‐IR spectroscopy. A mesogen‐free thermotropic liquid crystalline state was observed in a certain temperature region. The strong ionic interaction between  COO⁻ (from OA) and  NH (from PEI) and the hydrophobic interaction between the alkyl side chains contributes to the formation of a thermotropic liquid crystalline structure.

     

Studies of Adjacent Re‐Entry Folds of Chains of Syndiotactic l,2‐Poly(1,3‐butadiene) by Molecular Mechanics Calculations

The mode of packing and the adjacent re‐entry folds of chains of syndiotactic 1,2‐poly(1,3‐butadiene) have been studied by molecular mechanics calculations with the use of various sets of potential functions. The results of the packing analysis indicate that the crystal grows preferentially along the [100] and [110] directions. Models of fold have been built up on an infinite ab surface completely covered by adjacent re‐entry folds in the (100) and (110) planes. The results of energy minimizations show that several almost isoenergetic folds, constituted by four monomeric units, can be realized in the (100) planes, while the fold in the (110) planes has higher energy. The calculated value of the work of fold is in satisfactory agreement with that derived by crystallization kinetics reported in literature.

     

Anionic copolymerizations of acrylonitrile with β-propiolactone

Anionic copolymerizations of acrylonitrile (monomer 1) with β-propiolactone (monomer 2) and the structures of the resulting copolymers were studied. The copolymerization with sodium cyanide in N,N-dimethylformamide gave copolymers of the structure I containing acid anhydride linkage in the molecular chains, with the monomer reactivity ratios, r₁ = 1.20, r₂ = 0.00. The copolymerization with potassium hydroxide gave either copolymers of the structure II (r₁ = 0.00, r₂ = 3.64 at 30°C; r₁ = 0.00, r₂ = 5.00 at 40°C) in N,N-dimethylformamide or only β-propiolactone homopolymer in toluene.      

The synthesis and fluorescence of novel N‐substituted‐1,8‐naphthylimides

The synthesis and characterisation of a series of novel 4‐acylamino and 4‐alkylamino‐N‐1,8‐naphthalimides is described. The UV‐visible absorption and emission properties of the compounds are reported. Significant solvent effects are noted for 4‐n‐butyl‐9‐n‐butyl‐1,8‐naphthylimide. The incorporation of acetyl and chloroacetyl groups into the 4‐substituent markedly increases the fluorescence quantum yield compared with 4‐alkylamino substituemnts.     

In‐Situ Polymerization at the Interface of Micelles: A Novel Method to Control Functionality and Morphology

A new method to control the morphology and functionality of micelles is reported. Triblock copolymer micelles with atom transfer radical polymerization initiators at the interface are prepared in aqueous solution. After in‐situ polymerization at the interface, the structures of the interface and corona change, and micelles with PDMAEMA‐PEG comb–coil coronal chains are obtained. In aqueous solution, the pH exerts an influence on the morphology of the micelles. The coronal chains adopt different conformations at different pH values. Upon drying, the two coronal chains phase separate and form nanometer‐sized domains.

     

Efficient Oxygen‐Induced Molar‐Mass Control of Poly(p‐phenylene vinylenes) Synthesized via the Gilch Route

Oxygen is shown to act as an efficient molar‐mass regulating agent in Gilch syntheses of PPV. As a scavenger, it undergoes instantaneous recombination with the initiating diradicals as soon as they appear in the system. Regular polymer formation can only start when all oxygen has been used, proceeding predominantly as chain‐growth polymerization of the p‐quinodimethane monomers. Since all radical species involved in this Gilch process are diradicals, some polyrecombination events occur in parallel. Therefore the initially formed peroxy diradicals are also incorporated into the resulting chains. Later, they break under very mild conditions, thereby causing a systematic decrease of the final molar mass of PPV.

     

Synthesis and molecular design of 4,8‐diaryl‐ and 4,8‐di(arylethynyl)pyrido[4,3‐d]pyrimidines: Potential applications in nonlinear optics. Diazines Part 49

Using metallation and cross‐coupling reactions, we report the synthesis of a new series of push‐pull compounds with a pyrido[4,3‐d]pyrimidine system as the central core. Two of them were tested and their NLO properties highlighted. Incorporation of triple and double bonds as spacer between the central core and the substituted aryl groups has been performed to allow an extension of conjugation.     

Bridged polyaromatics: Synthesis,structure, and isomorphous properties of methyl-substituted polymers containing CH2, O,and S bridges

Linear, crystalline polymers corresponding to the general formulas where X is CH₂, O, or S, were synthesized, and their isomorphous relationships were studied. The results point out that a close structural relationship exists within each series of compounds investigated.     

Synthesis of Novel Biomimetic Zwitterionic Phosphorylcholine‐Bound Chitosan Derivative

Summary: Water‐soluble biomimetic chitosan derivative conjugating zwitterionic phosphorylcholine was efficiently prepared through Atherton‐Todd reaction under the mild conditions, and the possible formation mechanism of zwitterionic product was related to the nucleophilic attack of adjacent 3‐hydroxyl on the D ‐glucosamine residue to phosphorus with the help of base. UV absorption and melting behaviors of DNA/phosphorylcholine‐bound chitosan derivative showed that the phosphorylcholine‐bound chitosan derivative could be a new carrier for long‐circulating macromolecular drug delivery.

Structure of zwitterionic PC‐chitosan.     

Microwave‐Assisted Ring‐Opening Polymerization of ε‐Caprolactone in the Presence of Ionic Liquid

Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol⁻¹ is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.

     

Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Conformational Behavior of Bottle‐Brush Polyelectrolytes with Charged and Neutral Side Chains

The conformational transition of a single bottle‐brush polyelectrolyte with charged and neutral side chains is studied through MD simulations. Counterions are included explicitly and no additional salt is added. The structure of the polyelectrolyte and the counterion condensation are found to depend greatly on the Bjerrum length. As the Bjerrum length increases, the neutral side chains in a poor solvent can condense into clusters with variable size. Moreover, the polyelectrolyte forms globular structures at large or very small Bjerrum lengths. This transition is quite different from that in the case of a good solvent, in which there are not observable clusters and a globular structure is only formed at large Bjerrum lengths.

     

Cationic Salt‐Responsive Bottle‐Brush Polymers

A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.

     

Structure‐Transport Relationship of Dendritic Core‐Shell Nanocarriers for Polar Dyes

TriPEGylated functionalized dendritic poly(ethylene imines) were synthesized and their transportation properties for rose Bengal (up to 50 guests per dendrimer) were evaluated. A critical aggregation concentration was observed, demonstrating the formation of aggregates among the dendrimers. The structure‐activity relationships show that their encapsulation capacities were dependent linearly on the density of the PEG shell, either as PEG length or degree of functionality, which confirmed that the PEG chains play a predominant role in the encapsulation process. It further gives some insights that the guest molecules appeared to be predominantly located in the PEG shell rather than in the core.

     

Darstellung neuer Spiro-Alkoxy-cyclophosphazatriene

Preparation of New Spiro-Alkoxy-Cyclophosphazatrienes New spiro-Alkoxy-cyclophosphazatrienes of the general formula are described. The preparation of the substances and their mass spectroscopic data are reported.