Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Microwave‐Assisted Synthesis of Novel 2,4‐Dihydro‐5‐[4‐(trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones and Potentiometric Determination of Their pKa in Nonaqueous Solvents

The novel 4‐amino‐ or 4‐aryl‐substituted 2,4‐dihydro‐5‐[(4‐trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones 3a – 3g were synthesized by reaction of N‐(ethoxycarbonyl)‐4‐(trifluoromethyl)benzenehydrazonic acid ethyl ester ( 2 ) and primary amines or hydrazine by microwave irradiation. Compounds 3a – 3g were potentiometrically titrated with tetrabutylammonium hydroxide (Bu₄NOH) in four nonaqueous solvents, i.e., ⁱPrOH, ^tBuOH, MeCN, and N,N‐dimethylformamide (DMF). Also half‐neutralization potential values and the corresponding pK_a values were determined in all cases.     

Synthesis of New Bis‐imidazole Derivatives

The reaction of aldimines with α‐(hydroxyimino) ketones of type 10 (1,2‐diketone monooximes) was used to prepare 2‐unsubstituted imidazole 3‐oxides 11 bearing an alkanol chain at N(1) (Scheme 2, Table 1). These products were transformed into the corresponding 2H‐imidazol‐2‐ones 13 and 2H‐imidazole‐2‐thiones 14 by treatment with Ac₂O and 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione, respectively (Scheme 3). The three‐component reaction of 10 , formaldehyde, and an alkane‐1,ω‐diamine 15 gave the bis[1H‐imidazole 3‐oxides] 16 (Scheme 4, Table 2). With Ac₂O, 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione or Raney‐Ni, the latter reacted to give the corresponding bis[2H‐imidazol‐2‐ones] 19 and 20 , bis[2H‐imidazol‐2‐thione] 21 , and bis[imidazole] 22 , respectively (Schemes 5 and 6). The structures of 11a and 16b were established by X‐ray crystallography.     

Synthesis of 1‐Methyl‐6,10‐diphenylheptalene Derivatives

The reduction of heptalene diester 1 with diisobutylaluminium hydride (DIBAH) in THF gave a mixture of heptalene‐1,2‐dimethanol 2a and its double‐bond‐shift (DBS) isomer 2b (Scheme 3). Both products can be isolated by column chromatography on silica gel. The subsequent chlorination of 2a or 2b with PCl₅ in CH₂Cl₂ led to a mixture of 1,2‐bis(chloromethyl)heptalene 3a and its DBS isomer 3b . After a prolonged chromatographic separation, both products 3a and 3b were obtained in pure form. They crystallized smoothly from hexane/Et₂O 7 : 1 at low temperature, and their structures were determined by X‐ray crystal‐structure analysis (Figs. 1 and 2). The nucleophilic exchange of the Cl substituents of 3a or 3b by diphenylphosphino groups was easily achieved with excess of (diphenylphospino)lithium (=lithium diphenylphosphanide) in THF at 0° (Scheme 4). However, the purification of 4a / 4b was very difficult since these bis‐phosphines decomposed on column chromatography on silica gel and were converted mostly by oxidation by air to bis(phosphine oxides) 5a and 5b . Both 5a and 5b were also obtained in pure form by reaction of 3a or 3b with (diphenylphosphinyl)lithium (=lithium oxidodiphenylphospanide) in THF, followed by column chromatography on silica gel with Et₂O. Carboxaldehydes 7a and 7b were synthesized by a disproportionation reaction of the dimethanol mixture 2a / 2b with catalytic amounts of TsOH. The subsequent decarbonylation of both carboxaldehydes with tris(triphenylphosphine)rhodium(1+) chloride yielded heptalene 8 in a quantitative yield. The reaction of a thermal‐equilibrium mixture 3a / 3b with the borane adduct of (diphenylphosphino)lithium in THF at 0° gave 6a and 6b in yields of 5 and 15%, respectively (Scheme 4). However, heating 6a or 6b in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) in toluene, generated both bis‐phosphine 4a and its DBS isomer 4b which could not be separated. The attempt at a conversion of 3a or 3b into bis‐phosphines 4a or 4b by treatment with t‐BuLi and Ph₂PCl also failed completely. Thus, we returned to investigate the antipodes of the dimethanols 2a, 2b , and of 8 that can be separated on an HPLC Chiralcel‐OD column. The CD spectra of optically pure (M)‐ and (P)‐configurated heptalenes 2a, 2b , and 8 were measured (Figs. 4, 5, and 9).     

Regioselective Synthesis of 2H‐Benzothiopyrano[3,2‐c]quinolin‐7(8H)‐ones by Tri‐n‐butyltinhydride–Mediated Radical Cyclization

A number of hitherto unreported 2H‐benzothiopyrano[3,2‐c]quinolin‐7(8H)‐ones have been regioselectively synthesized in 90–96% yield by tri‐n‐butyltinhydride–AIBN–mediated radical cyclization from 4‐(2′‐bromothioarylmethyl)‐1‐methylquinolin‐2(1H)‐ones and their corresponding sulfones. 4‐(2′‐Bromothioarylmethyl)quinolin‐2(1H)‐ones were in turn prepared from 4‐bromomethylquinolin‐2(1H)‐one and o‐bromothiophenols by refluxing in acetone in the presence of anhydrous K₂CO₃. These were converted to the corresponding sulfones by oxidation with two equivalents of m‐CPBA in refluxing dichloromethane for 1 h.     

Syntheses and antitumor activities of polymers containing amino acid and 5‐fluorouracil moieties

The new monomer, 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐5‐fluorouracil (ETEFU), was synthesized from 5‐fluorouracil (5‐FU) and 3,6‐endo‐methylene‐1,2,3,6‐tetrahydophthalimidoethanoyl chloride (ETEC). Its homopolymer and copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared by photopolymerization reactions using 2,2‐dimethoxy‐2‐phenylacetophenone (DMP) as the photoinitiator. The synthesized ETEFU and polymers were identified by FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The contents of ETEFU units in poly(ETEFU‐co‐AA) and poly(ETEFU‐co‐VAc) were 20 and 17 mol%, respectively. The number‐average molecular weights of the synthesized polymers determined by gel permeation chromatography (GPC) were 4,600 to 10,700 g mol⁻¹. In vitro cytotoxicities of samples were evaluated with cancer cell lines [mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937)] and a normal cell line [mouse liver cells (AC2F)]. Cytotoxicities of 5‐FU and synthesized samples against the cancer cell lines were ranked as follows: ETEFU > poly(ETEFU) > 5‐FU > poly(ETEFU‐co‐AA) > poly(ETEFU‐co‐VAc). The in vivo antitumor activities of poly(ETEFU) and poly(ETEFU‐co‐AA) against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all doses except for the activity of poly(ETEFU) at 0.8 mg/kg. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1589–1595, 1999     

Synthesis and biological activity of novel N‐tert‐butyl‐N,N′‐substitutedbenzoylhydrazines containing 2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl

In a search for new insect growth regulators with unusual biological properties and different activity spectrum, we thought that the preservation of the bioactive unit and the introduction of 2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl in N‐tert‐butyl‐N,N′‐dibenzoylhydrazine would enhance their larvicidal activities to a significant degree. Therefore, we designed and synthesized N′‐tert‐butyl‐N′‐[2‐methyl‐3‐(triphenylgermanyl)propoxycarbonyl]‐N‐benzoylhydrazine and analogs by two procedures. These novel compounds were characterized by elemental analyses, IR, and ¹H NMR. At the same time, N‐tert‐butyl‐N‐substitutedbenzoylhydrazines were prepared by a new method, and some reactions involved were studied. The preliminary results indicate that some compounds have inhibitory effects against plant pathogenetic bacteria such as early blight of tomato. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Poly(ε-caprolactone-co-δ-valerolactone) with Pendant Carboxylic Functional Groups

In this paper, aliphatic polyesters functionalized with pendant carboxylic groups were synthesized via several steps. Firstly, substituted cyclic ketone, 2‐(benzyloxycarbonyl methyl)cyclopentanone (BCP) was prepared through the reaction of enamine with benzyl‐2‐bromoacetate, and subsequently converted into the relevant functionalized δ‐valerolactone derivative, 5‐(benzyloxy carbonylmethyl)‐δ‐valerolactone (BVL) by the Baeyer‐Villiger oxidation. Secondly, the ring‐opening polymerization of BVL with ε‐caprolactone was carried out in bulk using stannous octoate as the catalyst to produce poly(ε‐caprolactone‐co‐δ‐valerolactone) bearing the benzyl‐protected carboxyl functional groups [P(CL‐co‐BVL)]. Finally, the benzyl‐protecting groups of P(CL‐co‐BVL) were effectively removed by H₂ using Pd/C as the catalyst to obtain poly(ε‐caprolactone‐co‐δ‐valerolactone) bearing pendant carboxylic acids [P(CL‐co‐CVL)]. The structure and the properties of the polymer have been studied by Nuclear Magnetic Resonance (NMR), Fourier Infrared Spectroscopy (FT‐IR) and Differential Scan Calorimetry (DSC) etc. The NMR and FT‐IR results confirmed the polymer structure, and the ¹³C NMR spectra have clearly interpreted the sequence of ε‐caprolactone and 5‐(benzyloxycarbonylmethyl)‐δ‐valerolactone in the copolymer. When the benzyl‐protecting groups were removed, the aliphatic polyesters bearing carboxylic groups were obtained. Moreover, the hydrophilicity of the polymer was improved. Thus, poly(ε‐caprolactone‐co‐δ‐valerolactone) might have great potential in biomedical fields.     

One‐Pot Synthesis of Pyrimido[1,2‐a]benzimidazoles under Solvent‐Free Conditions

A series of pyrimido[1,2‐a]benzimidazoles were obtained from aldehydes, 2‐aminobenzimidazole and ethyl acetoacetate in good‐to‐excellent yields by a simple, mild, and efficient procedure utilizing N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonamide (TBBDA) and poly(N‐bromo‐N‐ethylbenzene‐1,3‐disulfonamide) (PBBS) as catalysts.     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

Synthesis, Crystal Structure, Theoretical Calculation and Thermal Behavior of DNAZ·NTO

DNAZ·NTO was prepared by mixing 3,3‐dinitroazetidine (DNAZ) and 3‐nitro‐1,2,4‐triazol‐5‐one (NTO) in ethanol solution. Single crystals suitable for X‐ray measurement were obtained, which belong to monoclinic, space group P2₁/n with unit cell parameters of a=1.4970(4) nm, b=0.6325(2) nm, c=2.2347(7) nm, β=96.55(1) °, V=2.1022(11) nm³ , D_c=1.752 g·cm^?3, F(000) =1136 and Z=8. Based on the analysis of the molecule structure, the theoretical investigation of the title compound was carried out at B3LYP/6‐311++G** levels, and the natural atomic charge and natural bond orbital analysis were performed. The interaction between the cation and anion was also discussed. The thermal behavior of DNAZ·NTO was carried out by DSC and TG/DTG techniques. The apparent activation energy (E_a) and pre‐exponential constant (A) of the main exothermic decomposition reaction were obtained.     

Attempt to Synthesize Hindered 2,4,6‐Tri‐Aryloxy‐s‐Triazines: Bis(2,4‐di‐tert‐Butylphenyl) Carbonate – Crystal Structure

Some less hindered 2,4,6‐tri‐aryloxy‐s‐triazines were synthesized through the reaction of the corresponding phenols as a starting materials with cyanogen bromide (BrCN) to obtain the corresponding arylcyanates and then trimerized. Unexpectedly, 2,4‐di‐tert‐butyl‐1‐cyanatobenzene derived from 2,4‐di‐tert‐butylphenol did not trimerize but, indeed, yielded bis(2,4‐di‐tert‐butylphenyl) carbonate. The structures of 2,4,6‐tri‐aryloxy‐s‐triazines and bis(2,4‐di‐tert‐butylphenyl) carbonate were characterized by means of IR, ¹H, and ¹³C NMR spectroscopies. Also the structure of the latter compound was studied by X‐ray crystallography.     

“Smart” poly(2‐(dimethylamino)ethyl methacrylate‐ran‐9‐(4‐vinylbenzyl)‐9H‐carbazole) copolymers synthesized by nitroxide mediated radical polymerization

A series of poly(2‐(dimethylamino)ethyl methacrylate‐ran‐9‐(4‐vinylbenzyl)‐9H‐carbazole) (poly(DMAEMA‐ran‐VBK)) random copolymers, with VBK molar feed compositions f_VBK,0 = 0.02–0.09, were synthesized using 10 mol % [tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] nitroxide (SG1) relative to 2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropionic acid (BlocBuilder) at 80 °C and 90 °C. Controlled polymerizations were observed, even with f_VBK,0 = 0.02, as reflected by a linear increase in number average molecular weight (M_n) versus conversion X ≤ 0.6 with final copolymers characterized by relatively narrow, monomodal molecular weight distributions (M_w/M_n ≈ 1.5). Poly(DMAEMA‐ran‐VBK) copolymers were deemed sufficiently pseudo‐“living” to reinitiate a second batch of N,N‐dimethylacrylamide (DMAA), with very few apparent dead chains, as indicated by the monomodal shift in the gel permeation chromatography chromatograms. Poly(DMAEMA‐ran‐VBK) random copolymers exhibited tuneable lower critical solution temperature (LCST), in aqueous solution, by modifying copolymer composition, solution pH and by the addition of the water‐soluble poly(DMAA) segment. ¹H NMR analysis determined that, in water, the VBK units of the poly(DMAEMA‐ran‐VBK) random copolymer were segregated to the interior of the copolymer aggregate regardless of solution temperature and that poly(DMAEMA‐ran‐VBK)‐b‐poly(DMAA) block copolymers formed micelles above the LCST. In addition, the final random copolymer and block copolymer exhibited temperature dependent fluorescence due to the VBK units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of 4‐Aryl‐4,6‐dihydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐diones from Biginelli Compounds

Biginelli compounds 1 were first brominated at Me? C(6) with 2,4,4,6‐tetrabromocyclohex‐2,5‐dien‐1‐one to give Br₂CH? C(6) derivatives 2 . The hydrolysis of the 6‐(dibromomethyl) group of 2c to give the 6‐formyl derivative 3c in the presence of an expensive Ag salt followed by reaction with N₂H₄?H₂O yielded tetrahydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐dione ( 4c ; Scheme 1). However, treatment of the 6‐(dibromomethyl) derivatives 2 directly with N₂H₄?H₂O led to the fused heterocycles 4 in better overall yield (Schemes 1 and 2; Table).     

Reaction of Optically Active Oxiranes with Thiofenchone and 1‐Methylpyrrolidine‐2‐thione: Formation of 1,3‐Oxathiolanes and Thiiranes

The SnCl₄‐catalyzed reaction of (?)‐thiofenchone (=1,3,3‐trimethylbicyclo[2.2.1]heptane‐2‐thione; 10 ) with (R)‐2‐phenyloxirane ((R)‐ 11 ) in anhydrous CH₂Cl₂ at ?60° led to two spirocyclic, stereoisomeric 4‐phenyl‐1,3‐oxathiolanes 12 and 13 via a regioselective ring enlargement, in accordance with previously reported reactions of oxiranes with thioketones (Scheme 3). The structure and configuration of the major isomer 12 were determined by X‐ray crystallography. On the other hand, the reaction of 1‐methylpyrrolidine‐2‐thione ( 14a ) with (R)‐ 11 yielded stereoselectively (S)‐2‐phenylthiirane ((S)‐ 15 ) in 56% yield and 87–93% ee, together with 1‐methylpyrrolidin‐2‐one ( 14b ). This transformation occurs via an S_N2‐type attack of the S‐atom at C(2) of the aryl‐substituted oxirane and, therefore, with inversion of the configuration (Scheme 4). The analogous reaction of 14a with (R)‐2‐{[(triphenylmethyl)oxy]methyl}oxirane ((R)‐ 16b ) led to the corresponding (R)‐configured thiirane (R)‐ 17b (Scheme 5); its structure and configuration were also determined by X‐ray crystallography. A mechanism via initial ring opening by attack at C(3) of the alkyl‐substituted oxirane, with retention of the configuration, and subsequent decomposition of the formed 1,3‐oxathiolane with inversion of the configuration is proposed (Scheme 5).     

A Facile Synthesis of Aryl‐Substituted Hydrazono‐Pyrazolyl[1,2,4]triazolo[3,4‐b][1,3,4][thiadiazol]‐coumarin Derivatives

Some inimitable and therapeutic coumarin‐substituted fused[1,2,4]triazolo‐[3,4‐b][1,3,4]thiadizole derivatives were synthesized by the cyclocondensation reaction of 2‐oxo‐2H‐chromene‐3‐carboxylic acid ( 1 ) and 4‐amino‐5‐hydrazinyl‐4H‐[1,2,4]‐triazole‐3‐thiol ( 2 ) by using phosphorous oxychloride as a cyclizing agent. This cyclized intermediate 3‐(3‐hydrazino‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazol‐6‐yl)‐chromen‐2‐one ( 3 ) later condensation with various ethyl 2‐(2‐arylhydrazono)‐3‐oxobutanoates ( 4 ) in NaOAc/MeOH under reflux conditions afforded the corresponding new series of aryl‐substituted hydrazono‐pyrazolyl‐[1,2,4]triazolo[3,4‐b][1,3,4][thiadiazol]‐coumarin derivatives ( 5 ) in good to excellent yields. The structures of newly synthesized compounds were established on the basis of elemental analysis, IR, ¹H NMR and mass spectroscopic studies.     

Ultrasound‐Assisted Synthesis of 3‐(Arylamino)‐1‐ferrocenylpropan‐1‐ones

A successful aza‐Michael addition of arylamines to a conjugated enone, acryloylferrocene, has been achieved by ultrasonic irradiation of the mixture of these reactants and the catalyst, i.e., montmorillonite K‐10. This solvent‐free reaction, yielding ferrocene containing Mannich bases, 3‐(arylamino)‐1‐ferrocenylpropan‐1‐ones, considered as valuable precursors in organic synthesis, has been performed by using a simple ultrasonic cleaner. Among 17 synthesized β‐amino ketones, three were new ones, and these were fully characterized by spectroscopic means. X‐Ray crystallographic analysis of three of these crystalline products enabled the insight into the conformational details of these compounds. All compounds were evaluated for their antibacterial activities against six Gram‐positive and five Gram‐negative strains in a microdilution assay. The observed promising antibacterial activity (with a MIC value of 25 μg/ml (ca. 0.07 μmol/ml) as the best result for almost all tested compounds against Micrococcus flavus) seems not only to be compound but also bacterial species‐specific.     

Synthesis and properties of poly(isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐methacryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly[isobutyl methacrylate‐co‐butanediol dimethacrylate‐co‐3‐methacrylylpropylheptaisobutyl‐T8‐polyhedral oligomeric silsesquioxane] [P(iBMA‐co‐BDMA‐co‐MA‐POSS)] nanocomposites with different crosslink densities and different polyhedral oligomeric silsesquioxane (MA‐POSS) percentages (5, 10, 15, 20, and 30 wt %) were synthesized by radical‐initiated terpolymerization. Linear [P(iBMA‐co‐MA‐POSS)] copolymers were also prepared. The viscoelastic properties and morphologies were studied by dynamic mechanical thermal analysis, confocal microscopy, and transmission electron microscopy (TEM). The viscoelastic properties depended on the crosslink density. The dependence of viscoelastic properties on MA‐POSS content at a low BDMA loading (1 wt %) was similar to that of linear P(iBMA‐co‐MA‐POSS) copolymers. P(iBMA‐co‐1 wt % BDMA‐co‐10 wt % MA‐POSS) exhibited the highest dynamic storage modulus (E′) values in the rubbery region of this series. The 30 wt % MA‐POSS nanocomposites with 1 wt % BDMA exhibited the lowest E′. However, the E′ values in the rubbery region for P(iBMA‐co‐3 wt % BDMA‐co‐MA‐POSS) nanocomposites with 15 and 30 wt % MA‐POSS were higher than those of the parent P(iBMA‐co‐3 wt % BDMA) resin. MA‐POSS raised the E′ values of all P(iBMA‐co‐ 5 wt % BDMA‐co‐MA‐POSS) nanocomposites in the rubbery region above those of P(iBMA‐co‐5 wt % BDMA), but MA‐POSS loadings < 15 wt % had little influence on glass‐transition temperatures (T_g's) and slightly reduced T_g values with 20 or 30 wt % POSS. Heating history had little influence on viscoelastic properties. No POSS aggregates were observed for the P(iBMA‐co‐1 wt % BDMA‐co‐MA‐POSS) nanocomposites by TEM. POSS‐rich particles with diameters of several micrometers were present in the nanocomposites with 3 or 5 wt % BDMA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 355–372, 2005     

New Bisabolane Sesquiterpenes from the Rhizomes of Curcuma xanthorrhiza Roxb. and Their Inhibitory Effects on UVB‐Induced MMP‐1 Expression in Human Keratinocytes

Two new bisabolane sesquiterpenoids, 1 and 2 , along with five known ones, 13‐hydroxyxanthorrhizol ( 3 ), 12,13‐epoxyxanthorrhizol ( 4 ), xanthorrhizol ( 5 ), β‐curcumene ( 6 ), and β‐bisabolol ( 7 ), were isolated from the rhizomes of Curcuma xanthorrhiza Roxb . The chemical structures of the new compounds were determined to be (7R,10R)‐10,11‐dihydro‐10,11‐dihydroxyxanthorrhizol 3‐O‐β‐D ‐glucopyranoside ( 1 ) and (?)‐curcuhydroquinone 2,5‐di‐O‐β‐D ‐glucopyranoside ( 2 ) on the basis of 1D‐ and 2D‐NMR spectroscopic analyses and optical‐rotation characteristics. Compounds 2 and 3 decreased MMP‐1 expression in UVB‐treated human keratinocytes by ca. 8.9‐ and 7.6‐fold at the mRNA level, and by ca. 9.2‐ and 6.6‐fold at the protein level, respectively. The results indicate that the isolated compounds may have anti‐aging effects through inhibition of MMP‐1 expression in skin cells.     

New Alkaloids from Hippeastrum papilio (Ravenna) Van Scheepen

A new phytochemical study of the indigenous Brazilian species Hippeastrum papilio is reported herein. Three novel Amaryllidaceae alkaloids were isolated, including hippapiline ( 1 ), papiline ( 2 ), and 3‐O‐demethyl‐3‐O‐(3‐hydroxybutanoyl)haemanthamine ( 3 ). Their structures were determined by physical and spectroscopic methods. In addition, the known alkaloids, haemanthamine ( 4 ), galanthamine ( 5 ), narwedine ( 6 ), 11β‐hydroxygalanthamine ( 7 ), apogalanthamine ( 8 ), and 9‐O‐demethyllycosinine B ( 9 ) were identified. The unusual cis‐B/C‐ring fusion for the new homolycorine representative hippapiline was ratified by NMR and CD spectroscopy.