Semidilute solution structure of cellulose in an ionic liquid and its mixture with a polar organic co‐solvent studied by small‐angle X‐ray scattering

Structural and thermodynamic properties of cellulose solutions in the ionic liquid 1‐ethyl‐3‐methylimidazolium acetate (EMIMAc) and its binary mixtures with N,N‐dimethyl formamide (DMF) are studied by small‐angle X‐ray scattering (SAXS). These measurements indicate molecular dissolution of the cellulose chains without any significant aggregation. The power–law relationships of the evaluated correlation length and osmotic modulus to concentration exhibit exponents of ?0.76 and 2.06 for EMIMAc and ?0.80 and 2.14 for DMF/EMIMAc solvent mixture, respectively. Thus, these solvents can be considered to be good solvents for cellulose. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 888–894     

Multivariable structural characterization of semicrystalline polymer blends by small‐angle light scattering

A new multi‐variable‐measurement approach for characterizing and correlating the nanoscale and microscale morphology of crystal‐amorphous polymer blends with melt‐phase behavior is described. A vertical small‐angle light scattering (SALS) instrument optimized for examining the scattering and light transmitted from structures ranging from 0.5 to 50 μm, thereby spanning the size range characteristic of the initial‐to‐late stages of thermal‐phase transitions (e.g., melt‐phase separation and crystallization) in crystal‐amorphous polymer blends, was constructed. The SALS instrument was interfaced with differential scanning calorimetry (DSC), and simultaneous SALS/DSC/transmission measurements were performed. We show that the measurement of transmitted light and SALS under H_V (cross‐polarized) optical alignments during melting can be used to reliably measure the thermodynamic (e.g., crystal melting and melt‐phase separation temperatures) and structural variables (e.g., crystalline fraction within the superstructures and volume fraction of superstructures) necessary for describing the multiphase behavior of crystal‐amorphous blends in one combined measurement. We also evaluate the orientation correlations of crystalline volume elements within the superstructures. Our results indicate that simultaneous measurement of transmitted light can provide a reliable estimate of the total scattering from density and orientation fluctuations and the melt‐phase separation temperature of polymer blends. For solution‐cast poly(?‐caprolactone)/poly(D,L‐lactic acid) blends, our multivariable measurements during melting provide the parameters necessary to generate a crystal–liquid and liquid–liquid phase diagram and characterize the solid‐state morphology. This opens up the challenge to explore use of our vertical SALS instrument as a rapid and convenient method for developing structure–property relationships for crystal‐amorphous polymer blends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2714–2727, 2002     

Time‐resolved crystallization study of absorbable polymers by synchrotron small‐angle X‐ray scattering

Changes in the lamellar morphology that occurred during the quiescent isothermal crystallization of absorbable poly(p‐dioxanone) (PDS) and PDS/poly(glycolide) block copolymer were studied by synchrotron small‐angle X‐ray scattering. Important morphological parameters such as the lamellar long period, the thicknesses of the crystal and amorphous phases, and the scattering invariant were estimated as a function of time, and trends observed over a wide range of experimental conditions are discussed. Thicker but more perfect lamellae were detected at higher crystallization temperatures. The breadth of the normalized semilog Lorentz‐corrected intensity peak systematically decreased with increasing temperature. In addition, the values of the crystallization half‐time and the Avrami exponent (n = 2.5), determined from the real‐time changes in the lamellar development, showed superb agreement with the bulk crystallinity data generated from other experimental techniques, such as calorimetry and dielectric relaxation spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 153–167, 2001     

Cure temperature influence on natural rubber—A small angle X‐ray scattering study

To analyze the natural rubber behavior during vulcanization under different cure treatments, an experimental investigation using small angle X‐ray scattering was performed. To achieve this, a set of samples were prepared using sulfur and N‐t‐butyl‐2‐benzothiazole sulfenamide as accelerator and then cured at temperatures between 403 and 463 K reaching their optimum mechanical properties considering rheometer tests. The crosslink density of the samples was evaluated by means of the swelling technique in solvent. In the usual Lorentz corrected representation of the X‐ray scattered intensity, a maximum was observed in the plots corresponding to the cured samples, revealing a highly correlated structure. This maximum shifted toward higher values of the scattering vector when the cure temperature of the samples increased. This behavior is discussed in terms of the crosslinks type present in the vulcanized rubber network at different cure temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2966–2971, 2007     

Simultaneous wide‐angle X‐ray diffraction and differential scanning calorimetry analysis of the melting and recrystallization behavior of polyethylene and isotactic polypropylene containing cyclopentane units in the main chain

The melting and crystallization behavior of polyethylene and isotactic polypropylene containing 1,2‐ or 1,3‐disubstituted cyclopentane units in the main chain has been studied with simultaneous wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry. For the ethylene‐based copolymers, the position of a reflection peak in the WAXD patterns shifts to a low angle with the increasing acquired temperature. The temperature dependence on the axial length of the crystal lattice is more marked in the copolymers forming orthorhombic crystals (containing 1,2‐cyclopentane or 5.6 mol % 1,3‐cyclopentane units) than in those forming hexagonal crystals (containing 8.1 mol % 1,3‐cyclopentane units). For the isotactic propylene‐based copolymers, the position of the reflection peaks in the WAXD patterns is independent of the acquired temperature. The proportion of the γ form in the copolymer containing the 1,2‐cyclopentane units is higher than that in the copolymers containing the 1,3‐cyclopentane units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1457–1465, 2004     

Lamellar structural changes in miscible crystalline polymer blends during melting and crystallization processes,as studied by real‐time small‐angle X‐ray scattering measurements

Real‐time small‐angle X‐ray scattering (SAXS) measurement using synchrotron radiation was applied to study the lamellar structural changes in miscible crystalline polymer blends of poly(1,4‐butylene succinate) (PBSU) and poly(vinylidene fluoride) (PVDF) during melting and crystallization processes. The lamella of PBSU is either included in the interlamellar region of PVDF (interlamellar inclusion structure), or rejected from the interlamellar region of PVDF (interlamellar exclusion structure). The two lamellar structures coexists in the melt‐quenched samples of the PBSU/PVDF = 30/70 blend. Only the interlamellar exclusion structure exists in the drawn films of the PBSU/PVDF = 30/70 blend. The real‐time SAXS results show that the interlamellar exclusion structure in these samples is irreversibly transformed into the interlamellar inclusion structure by heating the sample above the melting temperature of PBSU and that the PBSU chains are crystallized between the lamellae of PVDF during the cooling process. The factors controlling the lamellar structural changes are possibly a balance of the miscibility and the chain exclusion by tie‐molecules and/or the chain diffusion under confinement by the lamellae of PVDF with higher melting temperature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1959–1969, 2007     

Conformation of comb‐like liquid crystal polymers in isotropic solution probed by small‐angle neutron scattering

The conformational characteristics of a comb‐like side‐chain liquid crystal polysiloxane (SCLCP), dissolved in deuterated chloroform, were evaluated by small‐angle neutron scattering (SANS) measurements over a wide q range. SANS studies were carried out on specimens with constant backbone length (DP = 198) and variable spacer length (n = 3, 5, and 11), and with constant spacer length (n = 5) and variable DP (45, 72, 127, and 198). The form factor P(q) at high q was analyzed using the wormlike chain model with finite cross‐sectional thickness (R_c) and taking into account the molecular weight polydispersity. The analysis generated values of persistence length in the range l_p = 28–32 Å, considerably larger than that of the unsubstituted polysiloxane chain (l_p = 5.8 Å), with contour lengths per monomer comparable to the fully‐extended polysiloxane backbone (l_m = 2.9 Å). This indicates a relatively rigid SCLCP chain due to the influence of the densely attached mesogenic groups. The SCLCP with n = 11 is more flexible (l_p = 28 Å) than those with n = 3 and n = 5 (l_p = 32 Å). The cross‐sectional thickness increases with spacer length, R_c ～ n^0.21±0.02 (3 ≤ n ≤ 11), and the contour length per monomer decreases with increasing spacer length, l_m ～ n^?0.35±0.01. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2412–2424, 2006     

Microstructure and relaxation behavior of flexible dielectric PVDF and HNBR blends: An assessment through small‐angle x‐ray scattering and dielectric relaxation spectroscopy

The work demonstrated the microstructure and the relaxation behavior of flexible electroactive blends of poly(vinylidene fluoride) (PVDF)/hydrogenated nitrile rubber (HNBR) by small‐angle X‐ray scattering and dielectric relaxation spectroscopy. Very few studies have been done so far on this topic for crystalline/rubbery blends. Lamellar morphology was observed for both the PVDF and its blends. HNBR suppressed the mobility of PVDF above its melting temperature, as evident from lowering of crystallization temperature, due to physical interaction. The interaction was increased with HNBR content. However, after complete crystallization, HNBR segments were expelled out from the lamella, and crystal long period remained intact in all the blends. Interestingly, some HNBR segments remained in the amorphous part of PVDF which reduced the electron density contrast of its crystalline and amorphous region. When HNBR was crosslinked, the interaction was reduced, and consequently, the crystallization became faster and electron density contrast increased. From the microscopic study, polydispersed particles were observed within the crystalline lamella. Interfacial polarization (IP) relaxation of PVDF was absent in the blends due to physical interaction, whereas IP relaxation of HNBR shifted to a higher frequency. The shift was higher at higher HNBR content and decreased when HNBR was crosslinked. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 851–866     

Small‐angle neutron scattering analysis of bottlebrush backbone and side chain flexibility

Bottlebrush polymers have densely tethered side chains grafted to a linear polymer backbone, resulting in stretching of both the side chains and backbone. Prior studies have reported that the side chains are only weakly stretched while the backbone is highly elongated. Here, scaling laws for the bottlebrush backbone and side chains are determined through small‐angle neutron scattering analysis of a systematic series of poly(lactic acid) bottlebrush polymers synthesized via a “grafting‐through” ring‐opening polymerization. Scattering profiles are modeled with the empirical Guinier–Porod, rigid cylinder, and flexible cylinder models. Side chains are found to be only weakly stretched, with an end‐to‐end distance proportional to N^0.55, while the overall bottlebrush increases in size proportional to N^0.77. These results demonstrate that the bottlebrush backbone is not fully extended and that both side chains and backbone have significant conformational flexibility in solution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 104–111     

Crystallization and structure formation in polymer blends with strong intermodular interactions: blends of poly(ethylene oxide) and styrene-hydroxystyrene copolymers

Time-resolved synchrotron wide- and small-angle X-ray scattering experiments were used to investigate crystallization behavior and microstructure development of a nearly monodisperse poly(ethylene oxide) [PEO] (M_w = 53,500), and its melt-miscible blends with two fractionated styrene - hydroxystyrene random copolymers [SHS]. PEO crystallization rates decrease significantly in the presence of the melt-miscible SHS copolymers. All low and high molecular weight SHS blends exhibit a crystallization process at relatively short times characterized by large Avrami exponents (n), followed by a dominant process with n near that of neat PEO. A model for the crystallization of these blends is proposed.     

Capillary flow behavior of worm‐like micelles studied by small‐angle X‐ray scattering and small angle light scattering

A novel capillary flow device has been developed and applied to study the orientation of worm‐like micelles, among other systems. Small‐angle X‐ray scattering (SAXS) data from micelles formed by a Pluronic block copolymer in aqueous salt solution provides evidence for the formation of worm‐like micelles, which align under flow. A transition from a rod‐like form factor to a less persistent conformation is observed under flow. Flow alignment of worm‐like micelles formed by the low molar mass amphiphile system cetyl pyridinium chloride+sodium salicylate is studied for comparative purposes. Here, inhomogenous flow at the micron scale is revealed by streaks in the small‐angle light scattering pattern perpendicular to the flow direction. Copyright © 2006 John Wiley & Sons, Ltd.     

Crystallization and melting of isotactic polypropylene crystallized from quiescent melt and stress‐induced localized melt

Temperature dependency of crystalline lamellar thickness during crystallization and subsequent melting in isotactic polypropylene crystallized from both quiescent molten state and stress‐induced localized melt was investigated using small angle X‐ray scattering technique. Both cases yield well‐defined crystallization lines where inverse lamellar thickness is linearly dependent on crystallization temperature with the stretching‐induced crystallization line shifted slightly to smaller thickness direction than the isothermal crystallization one indicating both crystallization processes being mediated a mesomorphic phase. However, crystallites obtained via different routes (quiescent melt or stress‐induced localized melt) show different melting behaviors. The one from isothermal crystallization melted directly without significant changing in lamellar thickness yielding well‐defined melting line whereas stress‐induced crystallites followed a recrystallization line. Such results can be associated with the different extent of stabilization of crystallites obtained through different crystallization routes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 957–963     

Investigation of the deformation of homogeneous poly(ethylene‐co‐1‐octene) by wide‐ and small‐angle X‐ray scattering using synchrotron radiation

The deformation behavior of homogeneous ethylene‐1‐octene copolymers was investigated as a function of the crystallinity and the crystal size and perfection, respectively, by wide‐ and small‐angle X‐ray scattering using synchrotron radiation. The crystallinity and the crystal size and perfection, respectively, are controlled by the copolymer composition and the condition of melt crystallization. The deformation includes rotation of crystals, followed by plastic deformation and complete melting of the initial crystal population, and final formation of microfibrils. The process of rotation, plastic deformation, and melting of crystals of the initial structure is completed at lower strain if the size and perfection of the crystals, respectively, decrease, that is, if crystals thermally melt at lower temperature. The kinetics of the fibrillation of the initial structure seems independent of the crystal symmetry, that is, rotation and melting of pseudohexagonal and orthorhombic polyethylene crystals (as evident in low‐crystalline specimens) are similar. The structure of the microfibrils, before and after stress release, is almost independent of the condition of prior melt crystallization, which supports the notion of complete melting of the initial crystal population. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1919–1930, 2002     

Anomalous small‐angle X‐ray scattering characterization of composites based on sulfonated poly(ether ether ketone), zirconium phosphates,and zirconium oxide

The morphology and distribution of zirconium oxide and zirconium phosphates in a matrix of sulfonated poly(ether ether ketone) (SPEEK) were investigated with anomalous small‐angle X‐ray scattering (ASAXS) and electron microscopy. ASAXS revealed that ZrO₂ was distributed in the SPEEK matrix in the form of nanoparticles smaller than 13 Å. A decrease in the conductivity suggested that the sulfonic groups were bound to the zirconium oxo species at the particle surface. Furthermore, two kinds of membranes containing zirconium phosphate were investigated. In one case, the phosphate was directly dispersed in the polymer solution for the casting of the membrane. In the other case, the phosphate was previously treated with n‐propyl ammonium and polybenzimidazole. From ASAXS data, the fractal dimension could be estimated. Mass‐fractal behavior was confirmed for the SPEEK membrane containing previously exfoliated zirconium phosphate, with aggregates of 6.3–165 Å. Surface‐fractal behavior was detected for membranes with untreated phosphates, with aggregates of 6.4–185 Å. The untreated phosphates caused an increase in the permeability, without changing the proton conductivity much. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 567–575, 2004     

Influence of long‐chain branching on the miscibility of poly(ethylene‐r‐ethylethylene) blends with different microstructures

The melt miscibility of two series of poly(ethylene‐r‐ethylethylene) (PE_Exx) polymers with different percentages (xx) of ethylethylene (EE) repeat units was examined with small‐angle neutron scattering (SANS). The first series consisted of comb/linear blends in which the first component is a heavily branched comb polymer (B90) containing 90% EE and an average of 62 long branches with a weight‐average molecular weight (M_W) of 5.5 kg/mol attached to a backbone with M_W = 10.0 kg/mol. The comb polymer was blended with six linear PE_Exx copolymers, all of which had M_W ≈ 60 kg/mol and EE percentages ranging from 55 to 90%; they were denoted L55 to L90, with the number referring to the percentage of EE repeat units. The second series consisted of linear/linear blends; the first component, with M_W = 220 kg/mol and 90% EE, was denoted L90A, and the second components were the same series of linear polymers, with M_W ≈ 60 kg/mol and various EE compositions. The concentrations investigated were 50/50 w/w, except for the blend of branched B90 and linear L90 (both components were 90% EE), for which 25/75 and 75/25 concentrations were also examined. The SANS results indicated that for the comb/linear blends, only the dB90/L90 blends were miscible, whereas the other five blends phase‐separated; for the linear/linear blends, dL90A/L83 and dL90A/L78 were miscible, whereas the other three blends were immiscible. These results indicate that long‐chain branching significantly narrowed the miscibility window of these polyolefin blends. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 466–477, 2002; DOI 10.1002/polb.10102     

Oriented lamellar structures in uniaxially drawn films of poly(vinylidene fluoride) and poly(3‐hydroxybutyrate) blends studied by small‐angle X‐ray scattering measurements

The lamellar structures in uniaxially drawn films of miscible crystalline/crystalline polymer blends of poly(vinylidene fluoride) (PVDF) and poly(3‐hydroxybutyrate) (PHB) were investigated by static and time‐resolved measurements of small‐angle X‐ray scattering (SAXS). Intense SAXS in the low angle range of the meridian was interpreted as originating from the interlamellar inclusion structure, in which the PHB chains were included between the lamellae of PVDF. The interlamellar inclusion was induced for the uniaxially drawn films of PVDF/PHB = 30/70 blend with a draw ratio (DR) of 2.8–4.5, whereas the lamellae of the PVDF and PHB components were mutually excluded from each other forming their own lamellar stacks (interlamellar exclusion) in the blend with a higher DR (5.0–5.7). When the highly drawn film with the interlamellar exclusion structure was heat treated at 154–165 °C, the interlamellar inclusion structure was partially induced by the heat treatment. The time‐resolved SAXS measurements indicated that the interlamellar inclusion structure was developed by melting and recrystallization of PVDF during the heat treatment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 381–392, 2009     

Central small‐angle diffuse scattering from fibers is made of two components

Small‐angle X‐ray and neutron scattering from materials with fibrous texture generally includes a central diffuse scattering that is either diamond‐shaped or shaped like a two‐bladed propeller. The central scattering from fibers of polyacrylonitrile, nylon, and poly(ethylene terephthalate) and in particular the changes seen during deformation and heating have been examined. The result is that all types of central scattering from fibers are best described as having two distinct components, where these components are an extended equatorial streak and an inner nearly isotropic scattering. They arise respectively from objects that do and do not become aligned or elongated during fiber production. Examples of objects that do not become aligned are small spherical voids and solid particles. Objects that do become aligned include internal phase boundaries, and the surfaces of the fibers themselves. The equatorial streak arises from an assembly of such elongated objects preferentially oriented along the fiber axis. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Small‐angle X‐ray scattering from poly(methylmethacrylate) in aqueous solutions of t‐butyl alcohol

Segment‐segment interaction of poly(methylmethacrylate) in t‐butyl alcohol‐water mixtures in poor solvent regime was studied. From the small‐angle X‐ray scattering measurements of semidilute solution range, the binary and ternary cluster integrals of polymer segments were determined from concentration dependence of the correlation length at various temperatures just above the upper critical solution temperature. We have calculated the contributions of the segment–segment interaction to the entropy and enthalpy from the measured temperature dependence of these interaction parameters and found that both quantities are negative and decrease with decreasing t‐butyl alcohol content. FT‐IR absorption peak of carbonyl group of poly(methylmethacrylate) shifts to the lower frequency with increasing water content. The implications of these findings are discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2195–2199, 1999     

Wide‐angle X‐ray diffraction and differential scanning calorimetry study of the crystallization of poly(ethylene naphthalate), poly(butylene naphthalate), and their copolymers

The crystallization behavior of a series of poly(ethylene‐co‐butylene naphthalate) (PEBN) random copolymers was studied. Wide‐angle X‐ray diffraction (WAXD) patterns showed that the crystallization of these copolymers could occur over the entire range of compositions. This resulted in the formation of poly(ethylene naphthalate) or poly(butylene naphthalate) crystals, depending on the composition of the copolymers. Sharp diffraction peaks were observed, except for 50/50 PEBN. Eutectic behavior was also observed. This showed isodimorphic cocrystallization of the PEBN copolymers. The variation of the enthalpy of fusion of the copolymers with the composition was estimated. The isothermal and nonisothermal crystallization kinetics were studied. The crystallization rates were found to decrease as the comonomer unit content increased. The tensile properties were also measured and were found to decrease as the butylene naphthalate content of the copolymers increased. For initially amorphous specimens, orientation was proved by WAXD patterns after drawing, but no crystalline reflections were observed. However, the fast crystallization of drawn specimens occurred when they were heated above the glass‐transition temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 843–860, 2004