Synthesis and characterization of organic–inorganic hybrid block copolymers containing a fully condensed ladder‐like polyphenylsilsesquioxane

A series of inorganic–organic hybrid block copolymers were synthesized via atom transfer radical polymerization using a fully condensed, ladder‐like structured polyphenylsilsesquioxane end‐functionalized macroinitiator. The inorganic portion, ladder‐like polyphenylsilsesquioxane, was synthesized in a one‐batch, base‐catalyzed system, whereas organic hard and soft monomers, styrene, and n‐butyl acrylate, were polymerized and copolymerized on the ends of the linear, inorganic backbone. Synthesized hybrid diblock, triblock, and random copolymers were characterized by ¹H NMR, ²⁹Si NMR, gel permeation chromatography, static light scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Hybrid block copolymers were well‐defined with low polydispersity (<1.4) and exhibited enhanced thermal properties in the form of increased glass transition and degradation onset temperatures over their organic analogues.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of organic‐inorganic hybrid gels by means of thiol‐ene and azide‐alkene reactions

Organic–inorganic hybrid gels have been synthesized from a multi‐vinyl functional cyclic siloxane, 1,3,5,7‐tetravinyltetramethylcyclotetrasiloxane (TVMCTS), or a cubic silsesquioxane, octavinyloctasilasesquioxane (PVOSS), and α,ω‐dithiol compounds, 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), using thiol‐ene reaction in toluene. The network structure of the resulting gels, mesh size and mesh size distribution, was quantitatively characterized by means of a scanning microscopic light scattering (SMILS). The gels obtained from TVMCTS‐HDT formed homogeneous network structure with 1.5–1.6 nm mesh. Relaxation peaks derived from large clusters and/or micro gels were detected in the SMILS analysis of the TVMCTS‐DDT, PVOSS‐HDT, and PVOSS‐DDT gels besides those from the small meshes. The organic–inorganic hybrid gels were also synthesized from TVMCTS, PVOSS with α,ω‐diazide compounds, 1,6‐hexanediazide (HDA), 1,10‐decanediazide (DDA), using azide‐alkene reaction in toluene. All the gels obtained with the azide‐alkene reaction formed the homogeneous network structure. Enthalpy relaxation at the glass transition of the dried samples was detected by differential scanning calorimetry to study the network uniformity of the original gels. The gels synthesized by the azide‐alkene reaction showed larger enthalpy than the gels synthesized by the thiol‐ene reaction, indicating homogeneous network structure in the former gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2229–2238     

Solid polymer electrolytes. VI. Microstructure of organic–inorganic hybrid networks composed of 3‐glycidoxypropyltrimethoxysilane and LiClO4 and affected by different synthetic routes

Hybrid organic–inorganic materials derived from 3‐glycidoxypropyltrimethoxylsilane were prepared via two different synthetic routes: (1) the HCl‐catalyzed sol–gel approach of silane followed by the lithium perchlorate (LiClO₄)/HCl‐catalyzed opening of epoxide and (2) the simultaneous gelation of tin/LiClO₄‐catalyzed silane/epoxide groups. LiClO₄ catalyzed the epoxide polymerization, and its effects on the structures of these hybrid materials were studied by NMR. The structure of the inorganic side was probed by solid‐state ²⁹Si NMR spectroscopy, and the characterizations of the organic side and the chemical processes involved in the different synthetic routes were performed with solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR. The different synthetic routes significantly affected the polymerization behaviors of the organic and inorganic sides in the presence of LiClO₄. A larger amount of LiClO₄ promoted the opening of epoxide and led to the formation of longer poly(ethylene oxide) chains via the HCl‐catalyzed sol–gel approach, whereas in the case of the tin‐catalyzed approach, the faster polymerization of the inorganic side hindered the growth of the organic network. The addition of LiClO₄ was proven to be without crystalline salt present in the hybrid networks by wide‐angle X‐ray powder diffraction. Also, the interactions between the ions and hybrid host, examined with Fourier transform infrared and ⁷Li proton‐decoupled magic‐angle‐spinning NMR, further demonstrated that extensive ion aggregation existed in these hybrid materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 151–161, 2004     

Characterization of proton‐conducting organic–inorganic polymeric materials by ASAXS

The distribution of ZrO₂ and phosphotungstic acid (PTA) in a matrix of sulfonated polyether ketone was investigated by anomalous small‐angle X‐ray scattering (ASAXS). Scattering curves were obtained using X‐ray energies near the Zr and W absorption edges, allowing the independent analysis of the distribution of ZrO₂ and PTA in the sample. The interaction between both inorganic components improved their dispersion considerably when compared with films containing just one of the additives. The synergism was correlated to previous investigations concerning proton conductivity and permeability of the membranes developed for direct methanol fuel cell. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2981–2992, 2005     

Isostructural organic–inorganic hybrid compounds: triethylcholine tribromidocadmate and triethylcholine tribromidomercurate

In order to search for new anionic architectures and develop useful organic–inorganic hybrid materials in halometallate systems, two new crystalline organic–inorganic hybrid compounds have been prepared, i.e. catena‐poly[triethyl(2‐hydroxyethyl)azanium [[bromidocadmate(II)]‐di‐μ‐bromido]], {(C₈H₂₀NO)[CdBr₃]}_n, (1), and catena‐poly[triethyl(2‐hydroxyethyl)azanium [[bromidomercurate(II)]‐di‐μ‐bromido]], {(C₈H₂₀NO)[HgBr₃]}_n, (2), and the structures determined by X‐ray diffraction analysis. The compounds are isostructural, crystallizing in the space group P2₁/n. The metal centres are five‐coordinated by bromide anions, giving a slightly distorted trigonal–bipyramidal geometry. The crystal structures consist of one‐dimensional edge‐sharing chains of MBr₅ trigonal bipyramids, between which triethylcholine counter‐cations are intercalated. O—H...Br hydrogen‐bonding interactions are present between the cations and anions.     

Studies on curing kinetics of a novel combined liquid crystalline epoxy containing tetramethylbiphenyl and aromatic ester‐type mesogenic group with diaminodiphenylsulfone

The curing kinetics of a novel liquid crystalline epoxy resin with combining biphenyl and aromatic ester‐type mesogenic unit, diglycidyl ether of 4,4′‐bis(4‐hydroxybenzoyloxy)‐3,3′,5,5′‐tetramethyl biphenyl (DGE‐BHBTMBP), and the curing agent diaminodiphenylsulfone (DDS) was studied using the advanced isoconvensional method (AICM). DGE‐BHBTMBP/DDS curing system was investigated the curing behavior by means of differential scanning calorimetry (DSC) during isothermal and nonisothermal processes. Only one exothermal peak appeared in isothermal DSC curves. A variation of the effective activation energy with the extent of conversion was obtained by AICM. Three different curing stages were confirmed. In the initial curing stage, the value of E_a is dramatically decreased from ～90 to ～20 kJ/mol in the conversion region 0–0.2 for the formation of LC phase. In the middle stage, the value of E_a keeps about ～80 kJ/mol for cooperative effect of reaction mechanism and diffusion control. In the final stage, a significant increase of E_a from 84 to 136 kJ/mol could be caused by the mobility of longer polymer chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3922–3928, 2007     

Influence of molecular weight on the phase behaviors of comb‐like polymers with long n‐alkyl side chains based on mesogen‐jacketed liquid crystalline polymers

A series of comb‐like polymers, poly{2,5‐bis[(4‐octadecyloxyphenyl)oxycarbonyl]‐styrenes{ (P‐OC18s) with different molecular weights (M_n) and low molecular weight distributions have been successfully synthesized via atom transfer radical polymerization. The phase behaviors have been investigated by a combination of techniques including differential scanning calorimetry, polarized optical microscopy, wide‐angle X‐ray diffraction, and temperature‐variable FTIR spectroscopy. One hand, phase behaviors of the alkyl tails were strongly influenced by the mesogens of polymers, leading to the poor packing of the alkyl tails and the low melting. The other hand, the liquid crystalline phase structures of polymers were found to be strongly M_n dependent. The samples with M_n ≤ 4.6 × 10⁴ formed a smectic phase in low temperature and an isotropic phase in high temperature. The samples with M_n ≥ 5.2 × 10⁴ displayed a reentrant isotropic phase, which was separating the smectic phase and columnar nematic phase. Meantime, the experiment results showed that the glass temperature and the transition temperature from smectic phase to isotropic phase both slightly increased with the increase of M_nS; however, the transition temperature from isotropic phase to columnar phase sharply decreased with the M_nS improved. The reappearance of isotropic phase is due to the competing between the driving force of the enthalpy and the driving force of the entropy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymer hybrids with functionalized silsesquioxanes via two physical interactions in one system

Transparent and homogeneous polymer hybrids were obtained from a series of random styrene/N,N‐dimethylacrylamide copolymers (PSnPAm) and octa(3‐hydroxypropyldimethylsiloxy)octasilsesquioxane (Cube‐OH) by means of the sol–gel reaction of phenyltrimethoxysilane (PTMOS). The resulting ternary polymer hybrids were prepared via two simultaneous physical interactions [hydrogen‐bonding and aromatic (π–π) interactions] in one system. Cube‐OH and PTMOS were used to form hydrogen‐bonding and aromatic (π–π) interactions, respectively, with the organic copolymer. When PS90PA10 was used as an organic polymer for the two physical interactions, the transparency was maintained when the weight ratio of Cube‐OH to PTMOS was increased to 0.5. However, the polymer hybrids with PS65PA35 produced optically translucent or turbid materials, which indicated the phase separation of the organic polymer and silica gel. The homogeneity of the ternary polymer hybrids was dependent on the balance between the intensity of the hydrogen‐bonding interaction and that of the aromatic (π–π) interaction. The homogeneity was supported by the results of Fourier transform infrared, differential scanning calorimetry, scanning electron microscopy, and X‐ray diffraction, which demonstrated a nanometer‐level integration of the organic polymer, Cube‐OH, and silica gel. The initial decomposition temperature of the ternary polymer hybrids was more dependent on the amount of PTMOS than on that of Cube‐OH. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1306–1315, 2003     

Enthalpy Relaxation of Polymers: On the Possible Role of Liquid‐Crystalline Order

Isothermal physical ageing experiments were performed by differential scanning calorimetry to probe the enthalpy relaxation in a methacrylate copolymer carrying azobenzene mesogenic side groups. Further evidence of the ability of the configurational entropy model developed by Gomez Ribelles in describing the structural relaxation mechanism of polymers is provided. The trend of the equilibrium structural relaxation time was also determined as a function of the reduced temperature T_g/T. The comparison of the aging dynamics of the copolymer with those of previous analogous copolymers containing different amounts of azobenzene counits allowed us to highlight effects of the liquid‐crystalline nematic order on the properties of structural relaxation.

     

Thermotropic liquid‐crystalline polymers containing five‐membered heterocyclic groups. X. Relationships between structures of semirigid polyesters based on three disubstituted 2,5‐diphenyl‐1,3,4‐thiadiazoles and thermotropic liquid‐crystalline and optical properties

Thermotropic liquid‐crystalline (LC) semirigid polyesters based on three terphenyl analogues of 1,3,4‐thiadiazole (2,5‐diphenyl‐1,3,4‐thiadiazole)s (DPTD) linking undecamethyleneoxy chain at different substituted positions were synthesized from three disubstituted (4,4′‐, 3,4′‐, and 3,3′‐) dioxydiundecanols of DPTD and four diesters, and the relationships between polymer structures and LC and optical properties were investigated. DSC measurements, texture observations, and wide‐angle X‐ray analyses revealed that the polymers composed of DPTD moiety having a more linear molecular structure and 1,4‐phenylene unit or short aliphatic chain tend to exhibit LC smectic C and/or A phases. The following observations were made: (1) the emergence of smectic C and/or A phases in all the polymers on the basis of 4,4′‐disubstituted DPTD, (2) formation of enantiotropic smectic C and/or A phases in the polymers containing a 1,4‐phenylene unit in the main chain, (3) formation of a more stable smectic C phase in the polymers having a short aliphatic [(CH₂)₄] chain, and (4) a decrease of the mesomorphic property of the polyesters in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD. Solution and solid‐state ultraviolet–visible and photoluminescent spectra indicated that all the polyesters display maximum absorbances and blue emissions arising from the DPTD moiety, whose peak maxima were shifted to lower wavelengths in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD as well as the aforementioned LC property. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2676–2687, 2003     

Siloxane polymers containing azo moieties synthesized by click chemistry for photo responsive and liquid crystalline applications

Three new types of siloxane‐based photoactive liquid crystalline polymers containing azo side groups were synthesized through the click chemistry route. The polymers having molecular weight range of 14,000–34,000 g mol^?1 were soluble in most of the polar solvents like chloroform, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, and dichloromethane. The photoresponsive trans–cis photoisomerization under UV radiation and cis–trans relaxation process in dark for the polymers were studied. The isomerization rate constants were found to be 0.01–0.04 sec^?1 and 1.16*10^?4–4.67*10^?4 sec^?1, respectively. It has been noted that the polymers showed high intensity absorption for n‐π* in chloroform. Both trans and cis forms of azide monomers having azo moiety exhibited molar extinction coefficient ( ? _max) in the range of 22,000–33,000 L mol^?1 cm^?1. The thermotropic behavior of the polymers was studied by polarizing optical microscope (POM) and differential scanning calorimetry (DSC) experiments. Polymer P1 showed liquid crystalline textures of nematic droplets, whereas P2 showed smectic focal conic texture and nematic droplets. Polymer P1 was also studied for photomechanical bending on exposure to UV radiation. The polymers showed initial degradation temperature in the range of 210–275°C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile synthesis of core‐shell organic–inorganic hybrid nanoparticles with amphiphilic polymer shell by one‐step sol–gel reactions

Organic–inorganic hybrid core‐shell nanoparticles with diameters ranging from 100 to 1000 nm were prepared by a one‐pot synthesis based on base catalyzed sol–gel reactions using tetraethoxysilane and a triethoxysilane‐terminated polyethylene‐b‐poly(ethylene glycol) as reactants. Data from TEM, TGA, and solid‐state NMR analysis are in agreement with the formation of core‐shell nanoparticles with an inorganic‐rich core and an external shell consisting of an amphiphilic block copolymer monolayer. The influence of the organic–inorganic ratio, solution concentration, and postcuring temperature on core and shell dimensions of the nanospheres were investigated by TEM microscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1699–1709, 2008     

An organic–inorganic hybrid compound containing imidazolium cations and a one‐dimensional lithium hexacyanidocobaltate‐based anionic framework

An organic–inorganic hybrid compound, catena‐poly[bis(3H‐imidazol‐1‐ium) [[tetracyanido‐κ⁴C‐cobalt(III)]‐μ‐cyanido‐κ²C:N‐[diaqualithium(I)]‐μ‐cyanido‐κ²N:C]], {(C₃H₅N₂)₂[CoLi(CN)₆(H₂O)₂]}_n, was synthesized by the reaction of Li₃[Co(CN)₆] with imidazolium chloride in aqueous solution. The compound crystallizes in the monoclinic space group C2/c (data collected at 273 K). In the crystal structure, neighbouring [Co(CN)₆]³⁻ anionic units are linked by Li⁺ cations through the cyanide groups in a trans mode, forming a one‐dimensional zigzag chain structure extending along the c axis. A three‐dimensional supramolecular network is formed through hydrogen‐bonding interactions and is further stabilized by weak CN...π interactions between the cyanide groups and the imidazolium cations.     

Synthesis of a novel hybrid liquid‐crystalline rod–coil diblock copolymer

A series of novel rod–coil diblock copolymers on the basis of mesogen‐jacketed liquid‐crystalline polymer were successfully prepared by atom transfer radical polymerization from the flexible polydimethylsiloxane (PDMS) macroinitiator. The hybrid diblock copolymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐block‐polydimethylsiloxane, had number‐average molecular weights (M_n's) ranging from 9500 to 30,900 and relatively narrow polydispersities (≤1.34). The polymerization proceeded with first‐order kinetics. Data from differential scanning calorimetry validated the microphase separation of the diblock copolymers. All block copolymers exhibited thermotropic liquid‐crystalline behavior except for the one with M_n being 9500. Four liquid‐crystalline diblock copolymers with PDMS weight fractions of more than 18% had two distinctive glass‐transition temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1799–1806, 2003     

Synthesis and optical properties of σ–π conjugated organic–inorganic hybrid gels

Organic–inorganic hybrid gels containing Si‐vinylene units have been synthesized by a hydrosilylation reaction of tri‐ or tetra‐ethynyl aryl compounds, 1,3,5‐triethynylbenzene (TEB), 3,3′,5,5′‐tetraethynylbiphenyl (TEBP), or tetrakis(4‐ethynylphenyl)methane (TEPM), and bisdimethylsilyl compounds, 1,1,3,3‐tetramethyldisiloxane (TMDS) or 1,4‐bisdimetylsilylbenzene (BDMSB), in toluene. Network structure of the resulting gels was quantitatively characterized by a scanning microscopic light scattering. The reactions yielded the gels having homogeneous network structure of 1.5–2.9 nm mesh size under the monomer concentrations that were relatively higher than the critical gelation concentration. The gels obtained from TEB showed broad absorption in the range from 340 to 370 nm, and emission in the range from 440 to 490 nm. The TEB–BDMSB gels showed remarkable red shift of the emission in comparison with that of the corresponding reaction solutions derived from the network formed by σ–π conjugation. The TEPM–TMDS, BDMSB gels exited by 280 nm showed not only the emission peak at around 360 nm derived from TEPM, but the broad peak at around 420 nm, which should be derived from interaction between phenyl groups of TEPM in the gels. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1360–1368     

Mesostructure organic‐inorganic hybrid ionic liquids based on heteropoly acids: Effect of linkage on the molecular structure and catalytic activity

The new inorganic–organic hybrids based on SO₃H‐functionalized ionic liquids (ILs) and Keggin‐type heteropoly acids (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀; HPAs) are prepared and characterized by FT‐IR, NMR, XRD, CV, SEM/EDX, ICP‐OES, BJH and UV. Different molecular structures according to the different inorganic part were also proved. Potentiometric titration showed a good relationship between catalytic activity and acidity of the catalysts. Electrochemical aspects showed electron transfer ability of the compounds. For understanding catalytic activities of the HPA‐IL hybrids in N‐formylation reaction, effect of catalyst composition, substrate, and reaction conditions were studied. The best SO₃H‐functionalized ionic liquid catalyst was readily recovered and reused for four runs. Easy preparation of the catalyst, simple and easy work‐up, mild reaction conditions, low cost, excellent yields and short reaction times are the key features of this work.     

Thermotropic liquid‐crystalline poly(oxadiazole)s with poly(methylene) spacers: Preparation and extraordinary odd–even effect

A novel synthetic procedure for the preparation of poly(oxadiazole)s was developed with nucleophilic substitution of α,ω-alkanediols with oxadiazole-activated bisfluoride. Seven poly(oxadiazole)s were successfully prepared by the solution polymerization of 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazole and various α,ω-alkanediols [HO (CH₂)_n OH, n = 5–10 or 12] in diphenyl sulfone at temperature greater than 230 °C with K₂CO₃ as a catalyst. The reduced viscosities of the poly(oxadiazole)s were 0.14–0.51 dL/g, and the decomposition temperatures were greater than 350 °C and decreased from 436 to 379 °C with increasing spacer length (n). Corresponding model compounds, consisting of two terminal mesogenic 2,5-bisphenyl-1,3,4-oxadiazole units and central poly(methylene) spacers, were also prepared for comparison. Both the polymers and model compounds exhibited an extraordinary odd–even effect: odd ones showed higher transition temperatures (melting and clearing temperatures). With differential scanning calorimetry, polarized optical microscopy (POM), and X-ray diffraction, we found that the nematic mesophase was the only texture in the melts except for the polymers with longer methylene units (n = 9), in which smectic mesophases were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 293–301, 2002     

Synthesis and optical properties of organic–inorganic hybrid semi‐interpenetrating polymer network gels containing polyfluorenes

Organic–inorganic hybrid semi‐interpenetrating polymer network (semi‐IPN) gels containing polyfluorenes (PFs) are synthesized by hydrosilylation reaction of joint and rod molecules in toluene, where PFs are poly(9,9‐dihexylfluorene‐2,7‐diyl) (PF6) or, poly(9,9‐dioctylfluorene‐2,7‐diyl) (PF8), joint molecules are 1,3,5,7‐tetramethylcyclotetrasiloxane (TMCTS), or 1,3,5,7,9,11,13,15‐octakis(dimethylsilyloxy)pentacyclo‐[9,5,1,1,1,1]octasilsesquioxane (POSS), and rod molecules are 1,5‐hexadiene (HD) or 1,9‐decadiene (DD). The semi‐IPN gels containing low molecular weight PF6 show higher photoluminescence efficiency (?_g) than the toluene solution of PF6L (?_s). The semi‐IPN gels composed of long rod molecule of DD and cubic joint molecule of POSS show the most effective increase in the emission intensity. The emission intensity of PF6L increases as formation of the network in the POSS‐DD semi‐IPN gel. The POSS‐DD semi‐IPN gels containing high molecular weight PF6 and PF8 also show the increase of emission intensity than those of the toluene solutions. The semi‐IPN synthesized in cyclohexane show syneresis and phase separation between network structure and PF chains. The semi‐IPN gels containing PF8 show emission peaks at 450 and 470 nm derived from β‐sheet structure of PF8. A systematic study clears correlation between emission property and network structure and/or composition of semi‐IPN gels. The semi‐IPN gels provide emissive self‐standing soft materials with high efficiency and in a narrow wavelength range emission. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 973–984     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

Enhanced efficiency of polyfluorene derivatives: Organic–inorganic hybrid polymer light‐emitting diodes

Two novel organic–inorganic hybrid polyfluorene derivatives, poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐[2,5‐bis(octyloxy)‐1,4‐phenylene]} (PFDOPPOSS) and poly{(9,9′‐dioctyl‐2,7‐fluorene)‐co‐(9,9′‐di‐POSS‐2,7‐fluorene)‐co‐bithiophene} (PFT2POSS), were synthesized by the Pd‐catalyzed Suzuki reaction of polyhedral oligomeric silsesquioxane (POSS) appended fluorene, dioctyl phenylene, and bithiophene moieties. The synthesized polymers were characterized with ¹H NMR spectroscopy and elemental analysis. Photoluminescence (PL) studies showed that the incorporation of the POSS pendant into the polyfluorene derivatives significantly enhanced the fluorescence quantum yields of the polymer films, likely via a reduction in the degree of interchain interaction as well as keto formation. Additionally, the blue‐light‐emitting polyfluorene derivative PFDOPPOSS showed high thermal color stability in PL. Moreover, single‐layer light‐emitting diode devices of an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration fabricated with PFDOPPOSS and PFT2POSS showed much improved brightness, maximum luminescence intensity, and quantum efficiency in comparison with devices fabricated with the corresponding pristine polymers PFDOP and PFT2. In particular, the maximum external quantum efficiency of PFT2POSS was 0.13%, which was twice that of PFT2 (0.06%), and the maximum current efficiency of PFT2POSS was 0.38 cd/A, which again was twice that of PFT2 (0.19 cd/A). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2943–2954, 2006