Stereospecific and molecular weight‐controlled polymerization of 1,3‐butadiene with Co(acac)3‐MAO catalyst

The polymerization of butadiene (Bd) with Co(acac)₃ in combination with methylaluminoxane (MAO) was investigated. The polymerization of Bd with Co(acac)₃‐MAO catalysts proceeded to give cis‐1,4 polymers (94 – 97%) bearing high molecular weights (40 × 10⁴) with relatively narrow molecular weight distributions (M_w's/M_n's). The molecular weight of the polymers increased linearly with the polymer yield, and the line passed through an original point. The polydispersities of the polymers kept almost constant during reaction time. This indicates that the microstructure and molecular weight of the polymers can be controlled in the polymerization of Bd with the Co(acac)₃‐MAO catalyst. The effects of reaction temperature, Bd concentration, and the MAO/Co molar ratio on the cis‐1,4 microstructure and high molecular weight polymer in the polymerization of Bd with Co(acac)₃‐MAO catalyst were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2793–2798, 2001     

Dehydrogenation of poly(1,3‐cyclohexadiene)–polystyrene binary block copolymers

The dehydrogenation of poly(1,3‐cyclohexadiene)–polystyrene binary block copolymers obtained by anionic copolymerization with alkyllithium/amine systems was investigated for the first time. The dehydrogenation of the poly(1,3‐cyclohexadiene) block, which was composed of 1,2‐cyclohexadiene (1,2‐CHD) and 1,4‐cyclohexadiene (1,4‐CHD) units, was strongly affected by the polymer chain structure. The existence of 1,2‐CHD units prevented the dehydrogenation of the poly(1,3‐cyclohexadiene) block in the binary block copolymer. The rate of dehydrogenation was fast on a long sequence of 1,4‐CHD units, whereas it was relatively slow for 1,2‐CHD/1,4‐CHD (≈1/1) unit sequences. The bonding of the polystyrene block to the polymer chain effectively improved not only the rate of dehydrogenation of a long sequence of 1,4‐CHD units but also that of the polymer chain with a high content of 1,2‐CHD units. The dehydrogenation of a poly(1,3‐cyclohexadiene) block containing a small number of 1,2‐CHD units progressed via step‐by‐step reactions. The dehydrogenation of a long sequence of 1,4‐CHD units proceeded as the first step. Subsequently, in the second step, the 1,2‐CHD/1,4‐CHD (≈1/1) unit sequences remaining in the polymer chain were dehydrogenated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3526–3537, 2006     

Anionic polymerization of 1,3‐cyclohexadiene with alkyllithium/amine system in an aromatic hydrocarbon solvent: Predominant formation of 1,2‐addition product

Steric hindrance of the amine strongly affected the formation of the dominant 1,2‐addition product from the anionic polymerization of 1,3‐cyclohexadiene (1,3‐CHD) initiated by the alkyllithium (RLi)/amine system in an aromatic hydrocarbon solvent. 1,2‐Cyclohexadiene (1,2‐CHD)/1,4‐cyclohexadiene (1,4‐CHD) unit molar ratios from 85/15 to 93/7 were obtained using an RLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA) system in toluene. The C? Li bonds of poly(1,3‐cyclohexadienyl)lithium (PCHDLi)/TMEDA complex in toluene appeared to be strongly polarized with small steric hindrance. Intermolecular forces contributing to the aggregation were strong for high‐molecular‐weight poly(1,3‐cyclohexadiene) (PCHD) consisting of almost all 1,2‐CHD units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6604–6611, 2008     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Oxidation of poly(1,3‐cyclohexadiene): Influence of the polymer chain structure

The influence of the microstructure on the oxidation of poly(1,3‐cyclohexadiene) (PCHD) homopolymer, obtained by anionic polymerization with alkyllithium/amine systems, was investigated for the first time. PCHD has a structure consisting of a main chain formed by 1,2‐addition (the 1,2‐CHD unit) and 1,4‐addition (the 1,4‐CHD unit). The molar ratio of 1,2‐CHD/1,4‐CHD units in the polymer chain strongly influenced the extent of oxidation of PCHD. A polymer chain with a high content of 1,4‐CHD units was easily oxidized by air and 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ). In contrast, the progress of oxidation was prevented in the case of PCHD containing 52% of 1,2‐CHD units. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 837–845, 2006     

Synthesis of star poly(1,3‐cyclohexadiene): Grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto C60

The grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto fullerene‐C₆₀ (C₆₀) was strongly affected by the nucleophilicity of poly(1,3‐cyclohexadiene) (PCHD) carbanions and the polymer chain microstructure, and progressed via step‐by‐step reactions. A star‐shaped PCHD, having a maximum of four arms, was obtained from poly(1,3‐cyclohexadienyl)lithium composed of all 1,4‐cyclohexadiene (1,4‐CHD) units. The rate of the grafting reaction was accelerated by the addition of amine. The grafting density of PCHD arms onto C₆₀ decreased with an increase in the molar ratio of 1,2‐cyclohexadiene (1,2‐CHD) units. The electron‐transfer reaction from PCHD carbanions to C₆₀ did not occur in either a nonpolar solvent or a polar solvent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3282–3293, 2008.     

Long‐chain‐branched polyethene by the copolymerization of ethene and nonconjugated α,ω‐dienes

Ethene was copolymerized (1) with 1,5‐hexadiene with rac‐ethylenebis(indenyl)zirconium dichloride/methylaluminoxane (MAO) used as a catalyst and (2) with 1,7‐octadiene with bis(n‐butylcyclopentadienyl)zirconium dichloride/MAO and rac‐ethylenebis(indenyl)hafnium dichloride (Et[Ind]₂HfCl₂)/MAO used as catalysts at 80 °C in toluene. The copolymer microstructure and the influence of diene incorporation on the rheological properties were examined. Ethene and 1,5‐hexadiene formed a copolymer in which a major fraction of the 1,5‐hexadiene was incorporated into rings and a small fraction formed 1‐butenyl branches. The copolymerization of ethene with 1,7‐octadiene resulted in a higher selectivity toward branch formation. Some of the branches formed long‐chain‐branching (LCB) structures. The ring formation selectivity increased with decreasing ethene concentration in the polymerization reactor. Melt rheological properties of the diene copolymers resembled those of metallocene‐catalyzed LCB homopolyethenes and depended on the vinyl content, the catalyst, and the polymerization conditions. At high diene contents, all three catalysts produced crosslinked polyethene. This was especially pronounced with Et[Ind]₂HfCl₂, where only 0.2 mol % 1,7‐octadiene in the copolymer was required to achieve significantly modified rheological properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3805–3817, 2001     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

Kinetics of hexene‐1 polymerization using [(N,N′‐diisopropylbenzene)‐2,3‐(1,8‐napthyl)‐1,4‐diazabutadiene] dibromonickel/methylaluminoxane catalyst system

Kinetics of hexene‐1 polymerization was investigated using [(N,N′‐diisopropylbenzene)2,3‐(1,8‐napthly)‐1,4‐diazabutadiene]dibromonickel/methylaluminoxane catalyst. Experiments were performed at varying catalyst and monomer concentrations in the temperature range of ?10 to 35 °C. First order time‐conversion plot shows a downward curvature at temperatures of 20 °C and 35 °C indicating the presence of finite termination reactions. A nonlinear plot of degree of polymerization (P_n) with respect to conversion indicates occurrence of transfer reactions and slow initiation. The experimental molar masses are higher than predicted, which implies that a fraction of catalyst species could not be activated or is deactivated at the early stages of the reactions. The efficiency of the catalyst (Cat_eff) varies from 0.77 to 0.89. The observed polydispersity of the poly(hexene‐1) s is in the range of 1.18–1.48. The reaction order was found to be 1.11 with respect to catalyst. The Arrhenius plot obtained using the overall propagation rate constant, k_p, at five different temperatures (?10, 0, 10, 20, and 35 °C) was found to be linear with an activation energy, E_a = 4.3 kcal/mol. Based on the results presented it is concluded that the polymerization of hexene‐1 under the above‐mentioned conditions shows significant deviation from ideal “living” behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1093–1100, 2007     

Aggregation of poly(1,3‐cyclohexadiene): Effects of molecular weight and polymer chain structure

The aggregation of poly(1,3‐cyclohexadiene) (PCHD), obtained by anionic polymerization with alkyllithium/amine systems, was examined using size exclusion chromatography (SEC) and size exclusion chromatography coupled with a multiangle laser light scattering photometer (SEC‐MALS). The PCHD polymer chain has a structure consisting of a main chain formed by 1,2‐addition (the 1,2‐CHD unit) and 1,4‐addition (the 1,4‐CHD unit). Mild stirring with relatively low temperature in the polymerization reaction forms an aggregation of PCHD. The molecular weight and molar ratio of 1,2‐CHD/1,4‐CHD units in the polymer chain strongly influence the aggregation of PCHD. In a high molecular weight PCHD, containing ～50% 1,2‐CHD units, an aggregation of the polymer was observed in tetrahydrofuran (THF) solution at room temperature. This aggregation of PCHD was soluble in 1,2,4‐trichlorobenzene (TCBz) and could be separated into each polymer molecule. In contrast, a polymer chain with a high content of 1,4‐CHD units having a relatively low cis‐stereospecificity was easily soluble in THF and TCBz without aggregating. A long polymer chain structure with a high content of 1,2‐CHD units is considered to be the reason for the generation of strong intermolecular forces contributing to the aggregation of PCHD with the solvophobic interactions. The degree of aggregation could be controlled by the conditions of the PCHD polymer solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1442–1452, 2006     

Cationic addition polymerization of 1,4‐dioxene using gacl3 as lewis acid catalyst: Long‐lived species‐mediated polymerization

Effective cationic addition polymerization of 1,4‐dioxene, a six‐membered cyclic olefin with two oxygen atoms adjacent to the double bond, was performed using a simple metal halide catalyst system in dichloromethane. The polymerization was controlled when the reaction was conducted using GaCl₃ in conjunction with an isobutyl vinyl ether–HCl adduct as a cationogen at –78°C to give polymers with predetermined molecular weights and relatively narrow molecular weight distributions. The long‐lived properties of the propagating species were further confirmed by a monomer addition experiment and the analyses of the product polymers by ¹H NMR and MALDI–TOF–MS. Although highly clean propagation proceeded, the apparent rate constant changed during the controlled cationic polymerization of 1,4‐dioxene. The reason for the change was discussed based on polymerization results under various conditions. The obtained poly(1,4‐dioxene) exhibited a very high glass transition temperature (T_g) of 217°C and unique solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Designed organo‐layered silicates as nanoreactors for 1,3‐butadiene stereospecific polymerization toward rubber nanocomposites synthesis

Organo‐modified layered silicates were synthesized and used as inorganic carriers for CoCl₂(P^tBu₂Me)₂‐MAO catalyst in the polymerization of 1,3‐butadiene, yielding cis‐1,4‐enriched polybutadiene. The organoclays were prepared by: (i) intercalation of (ar‐vinyl‐benzyl)trimethyl ammonium chloride salt through an ion exchange reaction, and (ii) the edge‐surface grafting by trimethylchlorosilane. The ammonium modifier acts as “spacer” increasing the layer d‐spacing and as “filler” favoring the silylation of the edge‐surface clay hydroxyls. The grafted silane prevents the MAO cocatalyst from reacting with the edge‐OHs, by forcing it to react within the interlayer clay region. MAO lead to methylation of the cobalt complex and carbanion abstraction to give a cobalt‐methyl cation that is stabilized by the MAO anion. The nanoconfined cationic alkylated species insert the butadiene on the Co‐Me bond affording the growth of the polymer chains within the clay layers. The growing of the macromolecular chains fills the interlayer silicate region giving an intercalated polybutadiene rubber nanocomposite. The role of the silicate organo modification on the heterogeneous catalyst structural features, the polymerization behavior and the nanocomposite structures are discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Poly(2,5‐dihydroxy‐1,4‐phenylene benzobisthiazole)/poly(1,4‐phenylene benzobisthiazole) copolymers: Chain packing and properties

Crystal‐packing, optical, and electrical properties of poly(2,5‐dihydroxy‐1,4‐phenylene benzobisthiazole) (DiOH‐PBZT) and copolymers of DiOH‐PBZT/poly(1,4‐phenylene‐benzobisthiazole) (PBZT) were examined. Intramolecular hydrogen bonds between the hydroxyl units and the neighboring nitrogen atoms, as evidenced by the IR spectra, led to the formation of a pseudoladder chain structure and changed the chain packing. The (200) and (010) planes were both affected by the copolymer composition, with the (200) plane spacing increasing from 5.895 to 6.482 Å and the (010) plane spacing decreasing from 3.539 to 3.404 Å with the transition from the unsubstituted PBZT homopolymer to the DiOH‐PBZT homopolymer. The cell dimensions of the copolymers were simple averages of those of the individual homopolymers, suggesting the isomorphic crystal structure formation of the two units. The c‐axis spacing, however, remained unchanged. The increase in the conjugation length of the copolymers as the dihydroxy content increased was confirmed by the bathochromic shift of the absorption band in the ultraviolet–visible spectra. The intrinsic conductivities of the copolymers were 3 orders of magnitude higher than that of the unsubstituted PBZT. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 559–565, 2001     

Synthesis of poly(p‐phenylene)‐poly(4‐diphenylaminostyrene) bipolar block copolymers with a well‐controlled and defined polymer chain structure

A poly(p‐phenylene) (PPP)‐poly(4‐diphenylaminostyrene) (PDAS) bipolar block copolymer was synthesized for the first time. A prerequisite prepolymer, poly(1,3‐cyclohexadiene) (PCHD)‐PDAS binary block copolymer, in which the PCHD block consisted solely of 1,4‐cyclohexadiene (1,4‐CHD) units, was synthesized by living anionic block copolymerization of 1,3‐cyclohexadiene and 4‐diphenylaminostyrene. To obtain the PPP‐PDAS bipolar block copolymer, the dehydrogenation of this prepolymer with quinones was examined, and tetrachloro‐1,2‐(o)‐benzoquinone was found to be an appropriate dehydrogenation reagent. This dehydrogenation reaction was remarkably accelerated by ultrasonic irradiation, effectively yielding the target PPP‐PDAS bipolar block copolymer. The hole and electron drift mobilities for PPP‐PDAS bipolar block copolymer were both on the order of 10^?3 to 10^?4 cm²/V·s, with a negative slope when plotted against the square root of the applied field. Therefore, this bipolar block copolymer was found to act as a bipolar semi‐conducting copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of ethylene‐1‐hexene copolymers from ethylene stock by tandem action of bis(2‐dodecylsulfanyl‐ethyl) amine‐CrCl3 and Et(Ind)2ZrCl2

In this work, ethylene‐1‐hexene copolymers were synthesized with a tandem catalysis system that consisted of a new trimerization catalyst bis(2‐dodecylsulfanyl‐ethyl) amine‐CrCl₃/MAO ( 1 /MAO) and copolymerization catalyst Et(Ind)₂ZrCl₂/MAO ( 2 /MAO) at atmosphere pressure. Catalyst 1 trimerized ethylene with high activity and excellent selectivity in the presence of a relatively low amount of MAO. Catalyst 2 incorporated the 1‐hexene content and produced ethylene‐1‐hexene copolymer from an ethylene‐only stock in the same reactor. Adjusting the Cr/Zr ratio and reaction temperature yielded various branching densities and thus melting temperatures. However, broad DSC curves were observed when low temperatures and/or high Cr/Zr ratios were employed due to an accumulation of 1‐hexene component and composition drifting during the copolymerization. It was found that a short pretrimerization period resulted in more homogeneous materials that gave unimodal DSC curves. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3562–3569, 2007     

Synthesis of oligo(spiroketal)s by polycondensation of silyl ethers derived from naturally occurring myo‐inositol with 1,4‐cyclohexanedione

Oligo(spiroketal)s (OSKs) were synthesized from myo‐inositol, a naturally occurring cyclic compound bearing six hydroxyl groups. The successful synthesis of OSKs was achieved using silyl ethers 2 derived from 1,4‐di‐O‐alkylated myo‐inositol 1 as monomers, which underwent polycondensation with 1,4‐cyclohexanedione (CHD) at 0 °C in the presence of trimethylsilyl triflate as a catalyst. Because of the irreversible nature of the condensation reaction of silyl ethers with ketones, the resulting OSKs 7 had higher molecular weights than previously reported OSKs that were obtained by polycondensation of tetraols 1 with CHD, where backward hydrolysis of the ketal functions occurred. In addition, another series of OSKs, 8, were synthesized using silyl ethers 3 derived from 2,5‐di‐O‐alkylated myo‐inositol 6 , which are more symmetric monomers than silyl ethers 2 . Silyl ethers 3 underwent efficient polycondensation with CHD, whereas tetraol 6 did not, demonstrating that the derivation of such tetraols into the corresponding silyl ethers is a powerful strategy to access OSKs. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2407–2414     

Transesterification kinetics of poly(ethylene terephthalate) and poly(ethylene 2,6‐naphthalate) blends with the addition of 2,2′‐bis(1,3‐oxazoline)

The kinetics of the transesterification reaction between poly(ethylene terephthalate) (PET) and poly(ethylene 2,6‐naphthalate) (PEN) with and without the addition of a chain extender were studied with ¹H NMR. Different kinetic approaches were considered, and a second‐order, reversible reaction was accepted for the PET/PEN reactive blend system. The addition of 2,2′‐bis(1,3‐oxazoline) (BOZ) promoted the transesterification reaction between PET and PEN in the molten state. The activation energy of the transesterification reaction for the PET/PEN reactive blend with BOZ (94.0 kJ/mol) was lower than that without BOZ (168.9KJ/mol). The rate constant k took an almost constant value for blend samples with different compositions mixed at 275 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2607–2614, 2001     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

New biodegradable polymers from renewable sources: Polyester‐carbonates based on 1,3‐propylene‐co‐1,4‐cyclohexanedimethylene succinate

α,ω‐Dihydroxy‐terminated copolymeric oligomers of a 1,3‐propylene/1,4‐cyclohexanedimethylene succinate structure were obtained by the thermal polycondensation of 1,3‐propanediol/1,4‐cyclohexanedimethanol/succinic acid mixtures. They were subsequently chain‐extended via phosgene synthesis to high molecular weight aliphatic/alicyclic copolyester‐carbonates. These new polymers, besides having a biodegradable backbone, originate from two monomers, namely, 1,3‐propanediol and succinic acid, which can be obtained by renewable sources. Therefore, they have a potential as environmentally friendly materials. All synthesized materials were characterized in reference to their molecular structure by ¹H NMR and ¹³C NMR. Their molecular weights and molecular weight distributions were determined by size exclusion chromatography, and their main thermal properties were measured by DSC. Spectroscopic characterizations were in full agreement with the proposed structures. 1,4‐Cyclohexanedimethanol was used as a diol comonomer to improve the overall thermal properties of poly(1,3‐propylene succinate). The results of the characterization performed show that the initial expectations were only partially satisfied. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2508–2519, 2001     

Replacement of benzene with regulators for the catalyzed polymerization of 1,3‐butadiene to high cis‐1,4‐polybutadiene

The polymerization regulators mesitylene and 1,3,5‐trimethoxybenzene were investigated as suitable substitutes for benzene in the cobalt(II) octanoate/diethylaluminum chloride/water‐catalyzed polymerization of 1,3‐butadiene to high cis‐1,4‐polybutadiene. The propagation rates were reduced by 50% with the inclusion of 18 mM mesitylene or 0.17 mM trimethoxybenzene. Mesitylene was found to be an inefficient polymerization regulator because it reduced the propagation rate by a combination of regulation and destruction of the active catalyst complex. Not only did trimethoxybenzene reduce the propagation rate by effective regulation at low concentration, it also increased the percentage activity of cobalt to 200%, indicating that two polymer chains were propagating simultaneously from each active center. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2244–2255, 2001