Linearity relationship between solvatochromic shifts of stilbazolium-like dyes and modified reaction field function

We analyzed statistically the linear correlation of the solva-tochromic shifts of the stilbazolium-like dyes in the nonselected solvents with the reaction field function, L(εr) - bL( n2), and the solvent polarity parameter, ETN, respectively, and observed that there were not perfectly linearity relationships between them, so we introduced ETN into L(εr) - bL(n2) to form a new reaction field function, L(εr) - bL(n2) g ETN, called as the modified reaction field function, which can be perfectly linearly correlated with the solvatochromic shifts of the stilbazolium-like dyes in the nonselected solvents.     

Isotopic splitting patterns in the 13C NMR spectra of some partially deuterated 1‐aryl‐2‐(phenyldiazenyl)butane‐1,3‐dione and 4‐hydroxy‐3‐(phenyldiazenyl)‐2H‐chromen‐2‐one: evidence for elucidation of tautomeric forms

Nuclear magnetic resonance spectra of synthesized azo dyes derived from aniline derivatives in reaction with benzoylacetone and 4‐hydroxycoumarin were studied in both CDCl₃ and (CD₃)₂SO (two drops of D₂O were added into solutions of dyes). All dyes showed intramolecular hydrogen bonding. Dyes derived from o‐nitro aniline in the reaction with benzoylacetone, and 4‐hydroxycoumarin showed bifurcated intramolecular hydrogen bonds. The solvent‐substrate proton exchange of dyes derived from benzoylacetone and 4‐hydroxycoumarin was examined in the presence of two drops of D₂O. Among ten dye samples, two dyes derived from benzoylacetone did not show deuteration, three dyes showed partial deuteration and five dyes showed full deuteration under similar conditions. For the partially deuterated dyes the β‐isotope effect in ¹³C splitting was investigated and was used for the determination of the predominant tautomeric form. Copyright © 2016 John Wiley & Sons, Ltd.     

A Highly Sensitive Spectrophotometric Assay of Bleomycins Based on the Fading Reaction of Some Halofluorescein Dyes

In weak acidic medium, anticancer antibiotics bleomycin A5 （BLMA5） and bleomycin A2 （BLMA2） can react with halofluorescein dyes such as erythrosin （Ery）, eosin Y （EY）, eosin B （EB） and rose bengal （RB） by virtue of electrostatic attraction and hydrophobic force to form the ion-association complexes, which can result in the fading reactions of four halofluorescein dyes. The maximum fading wavelengths of these four dyes were located at 527 nm for Ery, 515 nm for EY, 517 nm for EB and 546 nm for RB, respectively. The decrements of absorbance （AA） were directly proportional to the concentrations of bleomycin in a certain range. A new method for the determination of bleomycins anticancer drugs based on fading reactions of halofluorescein dyes has been developed. The method was not only highly sensitive but also simple and rapid. The molar absorptivities （ε） ranged from 1.5 × 10^5 to 7.5 × 10^5 L·mol^-1·cm^-1. It was applied to determination of the bleomycins in human serum, urine and rabbit serum samples. In this work, the spectral properties and the optimum reaction conditions were investigated. The structure of ion-association complexes and the reaction mechanism were discussed.     

Organic Dyes with Well‐Defined Structures for Highly Efficient Dye‐Sensitised Solar Cells Based on a Cobalt Electrolyte

Seven SGT organics dyes, containing bis‐dimethylfluoreneyl amino groups with a dialkoxyphenyl unit as an electron donor and a cyanoacrylic acid group as an anchoring group, connected with oligothiophenes, fused thiophenes and benzothiadiazoles as π‐bridges, were designed and synthesised for applications in dye‐sensitised solar cells (DSSCs). The photovoltaic performance of DSSCs based on organic dyes with oligothiophenes depends on the molecular structure of the dyes, in terms of the length change of the π‐bridging units. The best performance was found with a π‐bridge length of about 6 Å. To further enhance the photovoltaic performance associated with this concept, cyclopenta[1,2‐b:5,4‐b′]dithiophene (CPDT) and benzothiadiazole were introduced into the π‐bridge unit. As a result, the DSSC based on the organic dye containing the CPDT moiety showed the best photovoltaic performance with a short‐circuit photocurrent density (J_sc) of 14.1 mA cm^?2, an open‐circuit voltage (V_oc) of 0.84 V and a fill factor (FF) of 0.72, corresponding to an overall conversion efficiency (η) of 8.61 % under standard AM 1.5 irradiation.     

Oxidation of crocein orange G by lignin peroxidase isoenzymes

The ligninolytic enzyme system ofPhanerochaete chrysosporiun is able to decolorize several recalcitrant dyes. Three lignin peroxidase isoenzymes, LiP 3.85, LiP 4.15, and LiP 4.65, were purified by preparative isoelectric focusing from the carbon-limited culture medium ofP. chrysosporium. Based on amino terminal sequences, the purified isoenzymes correspond to the isoenzymes H8, H6, and H2, respectively, from theN-limited culture. The purified isoenzymes were used for decolorization of an azo dye, Crocein Orange G (COG). According to the kinetic data obtained, the oxidation of COG by lignin peroxidase appeared to follow Michaelis-Menten kinetics. Kinetic parameters for each isoenzyme were determined. The inactivating effect of ascending H₂O₂ concentrations on COG oxidation is shown to be exponential within the used concentration range. The best degree of decolorization of 100 μM COG was obtained when the H₂O₂ concentration was 150 μM. This was also the lowest H₂O₂ concentration for maximal decolorization of 100 μM COG, regardless of the amount of lignin peroxidase used in the reaction.     

Effect of long alkyl chains of aniline donor on the photovoltaic performance of D‐π‐A zinc porphyrin for dye‐sensitized solar cells

Three novel dyes of JJ1 , JJ2 , and JJ6 featured zinc porphyrin as a basic core structure; N, N‐alkyl‐4‐(prop‐1‐yn‐1‐yl)aniline as an electron donor linked to meso‐10‐position; 4‐(prop‐1‐yn‐1‐yl)benzoic acid as an electron acceptor linked to meso‐20‐position; and 2,6‐bis(dodecyloxy)phenyl or 2,6‐bis(octyloxy)phenyl respectively linked to meso‐5 and meso‐15‐positions of zinc porphyrin have been synthesized and used for dye‐sensitized solar cells. Porphyrin JJ6 featured the shortest alkyl group (─C₄H₉) on the donor, whereas JJ2 contained the longest alkyl groups (─C₁₂H₂₅), and JJ1 has a medium length of octyl groups. With these new porphyrin sensitizers, we observed that JJ6 has 7.55% power conversion efficiency under simulated one‐sun illumination (AM 1.5 G, 100 mW/cm²) with J_SC = 18.64 mA/cm², V_OC = 0.66 V, and fill factor (FF) = 0.61, which was higher than the other two; JJ1 (7.35%) with J_SC = 18.83 mA/cm², V_OC = 0.68 V, and FF = 0.60; and JJ2 (6.33%) with J_SC = 15.69 mA/cm², V_OC = 0.62 V, and FF = 0.65. The power conversion efficiency of JJ6 and JJ1 were higher than JJ2 , demonstrating that the lengthy alkyl groups on the aniline cause a decrease in efficiency of the devices.     

Mesoporous silica particles grafted with poly(ethyleneoxide‐block‐N‐vinylcaprolactam)

Mesoporous silica particles were grafted with thermoresponsive poly(ethyleneoxide‐b‐N‐vinylcaprolactam), PEO‐b‐PVCL. N‐vinylcaprolactam was first polymerized on particle surfaces using surface initiated atom transfer radical polymerization (SI‐ATRP) and then, the poly(ethyleneoxide) blocks were attached to the PVCL chain ends with click chemistry. The sizes, thermoresponsiviness, and colloidal stability of SiO₂‐PVCL and SiO₂‐PVCL‐b‐PEO particles and their aqueous dispersions were studied by scanning electron microscopy, turbidimetry, dynamic light scattering, zeta sizer, and microcalorimetry. The phase separation temperature of the PEO‐b‐PVCL grafted particles did not considerably differ from that of the SiO₂‐PVCL particles. The zeta potential of the grafted particles was close to zero at room temperature but decreased strongly upon heating. The decrease is related to the collapse of the PVCL blocks and correspondingly, the exposure of the silica surface toward the aqueous phase. The colloidal stability of the particles could be enhanced by adding PEO blocks to the chain ends of the PVCL grafts. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5012–5020     

Synthesis and morphology of Fe3O4/polystyrene/poly(isopropylacrylamide‐co‐methyl acrylate acid) magnetic composite latex – 2,2′‐azobis (2‐methylpropionamidine) dihydrochloride as initiator

In this work, Fe₃O₄/polystyrene/poly(N‐isopropylacryl amide‐co‐methylacrylate acid) (Fe₃O₄/PS/P(NIPAAM‐co‐MAA)) magnetic composite latex was synthesized by the method of two stage emulsion polymerization. In this reaction system, 2,2′‐azobis(2‐methyl propionamidine) dihydrochloride (AIBA) was used as initiator to initiate the first stage reaction and second stage reaction. The Fe₃O₄ particles were prepared by a traditional coprecipitation method. Fe₃O₄ particles were surface treated by either PAA oligomer or lauric acid to form the stable ferrofluid. The first stage for the synthesis of magnetic composite latex was to synthesize PS in the presence of ferrofluid by soapless emulsion polymerization to form the Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out by the method of soapless emulsion polymerization with NIPAAM and MAA as monomers and Fe₃O₄/PS latex as seeds. The magnetic composite particles, Fe₃O₄/PS/P(NIPAAM‐co‐MAA), were thus obtained. The mechanism of the first stage reaction and second stage reaction were investigated. Moreover, the effects of PAA and lauric acid on the reaction kinetics, morphology, and particle size distribution were studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3912–3921, 2007     

Simultaneous formation of platinum‐based nanocatalysts and degradation of dyes at oil/water interface: Comparative morphological and kinetic studies

To decrease the water pollution of textile industries with a large amount of toxic and non‐biodegradable colored dye effluents, an efficient technique is required to safely remove harmful pollutants. In this paper, the reaction between azo dyes and NaBH₄ catalyzed by nanoparticles (NPs) thin films has been studied. We report insitu degradation of methyl orange (MO) and methyl red (MR) by using Pt‐based thin films monitored by UV–Vis spectroscopy. We have synthesized different thin films such as Pt, PtPd, PtFeFe₂O₃, PtNi and PtAu films from Pt organometallic precursor in the MO and MR medium (dye degradation and NPs formation is happened simultaneously) and activity of these films were compared in the complete degradation of MO and MR dyes. Rate constants for the catalyzed reactions have been determined. PtPd NPs thin film has shown the highest rate constant for the degradation of MO and MR within only a few seconds due to its well‐ordered structure. Furthermore, the effect of presence of MO on the morphology of NPs was investigated.     

Polyelectrolyte complexes. V. Solid‐state properties of some polycation/azo dye complexes controlled by the dye structure

The solid‐state properties of some polycation/azo dye complexes according to the dye structure were studied in this work. One polycation contained about 95 mol % N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride units in the backbone (PCA₅), and eight azo dyes, different in either the number of sulfonic groups or their distribution, were used as opposite components. The selected azo dyes were as Crystal Scarlet, Congo Red, Crocein Scarlet MOO, Ponceau SS, Amaranth, Ponceau S, Direct Blue 1, and Direct Red 80. Information on the compensation degree of the oppositely charges was obtained by the elemental analysis of the solid‐state polycation/dye complexes (the experimental contents of chlorine, nitrogen, and sulfur were compared with the calculated values). Differential scanning calorimetry was employed to probe the strength of the intermolecular interactions in the PCA₅/dye complexes. Wide‐angle X‐ray diffraction was used to assess the supramolecular order of the solid‐state complexes. The physical properties of the PCA₅/azo dye complexes (the complex stoichiometry, glass‐transition temperature, decomposition temperature, and degree of supramolecular order) were influenced mainly by the dye structure but also by the polycation concentration and the presence of NaCl. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 264–272, 2003     

Surface modification of multiwalled carbon nanotubes via nitroxide‐mediated radical polymerization

The nitroxide‐mediated radical polymerization of styrene was carried out on the surfaces of multiwalled carbon nanotubes (MWNTs) initiated by an MWNT‐supported initiator multiwalled carbon nanotube–2″,2″,6″,6″‐tetramethylpiperidinyloxy (MWNT–Tempo). The content of polystyrene grafted from the surface was controlled by changes in the polymerization conditions, such as the reaction times or the ratios of monomers to initiators. The obtained polystyrene‐grafted multiwalled carbon nanotubes (MWNT–PSs) were further used to initiate the polymerization of 4‐vinylpyridine to get polystyrene‐b‐poly(4‐vinylpyridine)‐grafted multiwalled carbon nanotubes (MWNT–PS‐b‐P4VPs). In contrast to unmodified MWNTs, MWNT–PSs had relatively good dispersibility in various organic solvents, such as tetrahydrofuran, CHCL₃, and o‐dichlorobenzene. The structures and properties of MWNT–PSs and MWNT–PS‐b‐P4VPs were characterized and studied with several methods, including thermogravimetric analysis, Fourier transform infrared, ultraviolet–visible, and transmission electron microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4656–4667, 2006     

Degradation of hazardous organic dyes with solar‐driven advanced oxidation process catalyzed by the mixed metal–organic frameworks

phosphonate‐based bimetallic metal‐ organic frameworks, namely STA‐12(M₁, M₂) (M₁, M₂ = Mn, Fe, Co), show photocatalytic activity for the degradation of Rhodamine B (RhB) and Methylene blue (MB) from aqueous solution under natural sunlight irradiation. The degradation of the dyes, appears to be faster with STA‐12(Fe, Mn) than other synthesized MOFs. Thus, photo‐Fenton oxidative discoloration of dyes has been studied by H₂O₂ catalyzed with the STA‐12(Fe, Mn). The process is first order with respect to dyes and the synergistic index in the STA‐12(Fe, Mn)/sunlight/H₂O₂system reached as high as 472%. Mineralization of dyes was discussed by spectroscopic and TOC measurement. Besides, the efficiency of STA‐12(Fe, Mn) used in photocatalytic process was attentively investigated through the characterization of reactive radicals, the stability and reusability of the photocatalyst, also the effect of operational parameters such as H₂O₂ dosage, solution pH and initial dye concentration. This work demonstrates the first example of facilitating photo‐Fenton‐like excitation of H₂O₂ via phosphonate based mixed metal organic frameworks as photocatalysts and explained a new opportunity for solar‐induced AOP environmental remediation and protection.     

Surface Modification of Nano－SiO2 by Grafting PMMA／PBA

The surface of nano-SiO2 was modified by being encapsulated with hydroxy-propyl-methyl cellulose (HPMC), and then co-grafted with acrylates. The grafting conditions, such as pH of the medium, and initiator concentration have been studied. The modified nano-SiO2 particles were characterized by TEM, DSC and FT-IR spectra. TEM images show that the surface of the nano-particles has been successfully modified by a thick layer of film-like polymer in this way. The DSC results show that the decomposition temperature of modified nano-particles of SIO2 is 90 ℃ higher than that of grafted-on polymer. According to the FT-IR spectra, It is convinced that poly-methyl methacrylate ( PMMA ) and poly-acrylic butyl-ester ( PBA ) were co-grafted onto the surface of nano-SiO2.     

2D-π-A Type Organic Dyes Based on N,N-Dimethylaryl Amine and Rhodamine-3-acetic Acid for Dye-sensitized Solar Cells

Three organic dyes XS17 – 19 based on N,N‐dimethylaryl amine and rhodamine‐3‐acetic acid moieties are designed and synthesized. These dyes were applied into nanocrystalline TiO₂ dye‐sensitized solar cells through standard operations, showing strong absorption bands at around 320–650 nm, and exhibiting broad IPCE responses. Cell based on XS17 gave a J_sc of 3.7 mA/cm², an open circuit voltage of 550 mV, and a fill factor of 0.68, corresponding to an overall conversion efficiency of 1.4%. The low overall conversion efficiency is due to the modest IPCE and V_oc values, which mainly stem from the acceptor of rhodanine‐3‐acetic acid.     

Magnetically assisted removal and separation of cationic dyes from aqueous solution by magnetic nanocomposite hydrogels

Magnetic poly(acrylic acid‐acrylamide‐butyl methacrylate) (P(AAB)) nanocomposite hydrogels were prepared and used as adsorbents for removal and separation of cationic dyes from aqueous solution. These magnetic P(AAB) nanocomposite hydrogels were characterized by scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). It was found that these magnetic P(AAB) nanocomposite hydrogels had magnetic responsive characters. The dynamic swelling, removal, and separation of cationic dye, crystal violet (CV), and basic magenta (BM) by these magnetic nanocomposite hydrogels were studied. The adsorption capacity and isotherm studies of cationic dyes onto magnetic P(AAB) nanocomposite hydrogels have been evaluated. The magnetic P(AAB) nanocomposite hydrogels containing Fe₃O₄ particles can be easily manipulated in magnetic field for removal and separation of cationic dyes from aqueous solution. Adsorption process agreed very well with the Langmuir and Freundlich models. Copyright © 2010 John Wiley & Sons, Ltd.     

Adsorption of acid red 114 and reactive black 5 in aqueous solutions on dendrimer‐conjugated magnetic nanoparticles

The adsorption of the dyes Acid Red 114 and Reactive Black 5 in aqueous solutions on polyhydroxyl dendrimer magnetic nanoparticles (Fe₃O₄@SiO₂‐TRIS) was studied in a batch system. The Fe₃O₄@SiO₂‐TRIS NPs were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Experiments were performed under different conditions such as the initial dye concentration, adsorbent dose, and pH. The pseudo‐second‐order model provided a very good fit for the two anionic dyes. The Langmuir and Freundlich adsorption models were used to describe the equilibrium isotherms at different temperatures, and the former agreed very well with the experimental data. However, the adsorption capacity of Fe₃O₄@SiO₂‐TRIS NPs was reduced during surface modification, which could be due to the dye occupying the binding sites of the dendrimer. Thermodynamic parameters, namely the change in free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰), were also determined.     

Well‐defined polyisoprene‐grafted silica nanoparticles via the RAFT process

The preparation of well‐defined polyisoprene‐grafted silica nanoparticles (PIP‐g‐SiO₂ NPs) was investigated. Surface initiated reversible addition fragmentation chain transfer (SI‐RAFT) polymerization was used to polymerize isoprene from the surface of 15 nm silica NPs. A high temperature stable trithiocarbonate RAFT agent was anchored onto the surface of particles with controllable graft densities. The polymerization of isoprene mediated by silica anchored RAFT with different densities were investigated and compared to the polymerization mediated by free RAFT agents. The effects of different temperatures, initiators, and monomer feed ratios on the kinetics of the SI‐RAFT polymerization were also investigated. Using this technique, block copolymers of polyisoprene and polystyrene on the surface of silica particles were also prepared. The well‐defined synthesized PIP‐g‐SiO₂ NPs were then mixed with a polyisoprene matrix which showed a good level of dispersion throughout the matrix. These tunable grafted particles have potential applications in the field of rubber nanocomposites. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1493–1501     

Molecular Engineering of Boryl Oxasmaragdyrins through Peripheral Modification: Structure–Efficiency Relationship

Expanded porphyrins with the absorption profile down to the infrared region through increased π‐conjugation are suitable candidates for a low energy sensitizer. Oxasmaragdyrin boron complexes, a class of aromatic‐core‐modified expanded porphyrin with 22 π‐electrons, have been recently utilized as an efficient low energy sensitizer in dye‐sensitized solar cells. In this paper, we have prepared a series of eight novel boryl oxasmaragdyrins through molecular engineering on the periphery and their overall photovoltaic performances in dye‐sensitized solar cells are evaluated. With the help of photophysical, electrochemical, and photovoltaic studies, it is revealed that molecular structure, especially the number and position of the donor–acceptor groups play a pivotal role in their photovoltaic performance. Presence of the two well‐separated split Soret bands in the 400–500 nm region of UV/Vis spectrum ensures broader coverage of absorption wavelengths. Even though the two‐anchoring‐group dyes ( SM5 – SM8 ) bind strongly to TiO₂ compared to one‐anchoring‐group dyes ( SM1 – SM4 ), the latter have superior photovoltaic performance than the former. Dye SM1 , with two hexyloxyphenyl donors and one carboxylic acid anchor showed the best overall conversion efficiency of 4.36 % (J_SC=10.91 mA cm^?2; V_OC=0.59 V; FF=0.68). This effective modulation of photovoltaic performance through structural engineering of the dyes will serve as a guideline for the future design of efficient low energy light‐harvesting sensitizers.     

Synthesis and Characterization of Heteroleptic Ru(II) Complexes Based on 4,4′‐Bis((E)‐styryl)‐2,2′‐bipyridine as Ancillary Ligand and Application for Dye‐Sensitized Solar Cells

Heteroleptic Ru(II) complexes were designed based on 4,4′‐bis((E)‐styryl)‐2,2′‐bipyridine (bsbpy) as an ancillary ligand for dye‐sensitized solar cells (DSSCs), and those Ru(II) sensitizers, [Ru(L)(bsbpy)(NCS)₂][TBA] (TBA; tetrabutylammonium), were synthesized according to a typical one‐pot reaction of [RuCl₂(p‐cymene)]₂ with the corresponding anchoring ligands (where L = 4,4′‐dicarboxy‐2,2′‐bipyridine (dcbpy), 4,4′‐bis((E)‐carboxyvinyl)‐2,2′‐bipyridine (dcvbpy), 4,7‐dicarboxy‐1,10‐phenanthroline (dcphen), or 4,7‐bis((E)‐carboxyvinyl)‐1,10‐phenanthroline (dcvphen)). The new Ru(II) dyes, [Ru(L)(bsbpy)(NCS)₂][TBA] that incorporated vinyl spacer(s) into ancillary and/or anchoring ligand displayed red‐shifted bands over the overall UV/VIS region relative to the absorption spectra of N719 . A combination of bsbpy ancillary and dcphen anchoring ligand showed the best result for the overall power conversion efficiency (η); i.e., a DSSC fabricated with [Ru(dcphen)(bsbpy)(NCS)₂][TBA] exhibited a power conversion efficiency (η) of 2.98% (compare to N719 , 4.82%).     

The preparation and characterization of carboxylic acid‐coated silica nanoparticles

The preparation of carboxylic acid‐coated silica nanoparticles was investigated. A monolayer of carboxylic acid residues with controllable graft density was anchored to the nanoparticle by a ring‐opening reaction with succinic anhydride. Poly(methacrylic acid) [poly(MAA)] grafted nanoparticles were prepared via a polymerization–deprotection strategy. Tert‐butyl methacrylate was polymerized from the surface of silica nanoparticles in a predictable manner and with excellent control over the molecular weight distribution. Subsequent removal of the tert‐butyl group resulted in poly (MAA) grafted nanoparticles. The polymer nanoparticles were also functionalized with dyes, which may be useful in tracking the particles in biological systems. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012