Stoichiometric vs Catalytic MeLi Reaction with the Mixture of (ẽ5‐C5H5)Fe(CO)2l and P(OR)3: Nucleophilic Methylation vs Arbuzov‐Like Dealkylation

The reaction of stoichiometric MeLi with the 1:1 mixture of (?⁵‐C₅H₅)Fe(CO)₂I/P(OR)₃ (R = Me, Et, and Ph) at ?78°C changes the bonding mode between metal and ring from (?⁵‐C₅H₅) to (?⁴‐exo‐MeC₅H₅) and the oxidation state of metal from Fe(II) to Fe(O), the novel complexes (?⁴‐exo‐MeC₅H₅)Fe(CO)₂P(C)R)₃ being obtained in 45‐57% yields. The reaction of trace MeLi with the 1:1 mixture of (?⁵‐C₅H₅)Fe(CO)₂I/P(OMe)₃ at ?78°C results in 70% yield of the phosphonate complex (?⁵‐C₅H₅)Fe(CO)₂P(O)(OMe)₂ which is an Arbuzov‐like dealkylation product from the cationic intermediate [(?⁵‐C₅H₅)Fe(CO)₂P(OMe)₃⁺] and the iodide. The amines could assist the Arbuzov‐like dealkylation of [(?⁵‐C₅H₅)Fe(CO)₂P(OMe)₃⁺] [PF₆^?] where iron‐carbamoyl intermediates are likely involved in the case of primary amines.     

Propylene Dimerization by（η^5—C9H7）2 Nickel（Ⅱ）Catalytic System

The catalytic performance of Ni(η^5-Ind)2 complex in the dimerization of propylene was studied in combimation with an organoaluminum co-catalyst,eventually in the presence of a phosphine ligand.The effects of the type of aluminum co-catalyst and its relative amount,the nature of phosphine ligand and P/Ni ratio as well as the reaction temperature were examined.The results indicated that the nickel precatalyst exhibited high productivity for the propylene dimerization together with organoaluminum.It was likely to strongly modify the reactivity in the catalytic sytem when using phosphine ligand as additives,especially at the reaction temperature below 0℃.The catalytic system based on Ni(η^5-Ind)2 complex displaed an extremely high productivity(TOF up to 16900h^-1)and a good regioselectivity to 2,3-dimethylbutenes (2,3-DMB) in dimers(66.4%)under proper reaction parameters.     

BIAN‐Fe(η6‐C6H6): Synthesis,characterization, and l‐lactide polymerization

The α‐diimine‐ligated Fe‐complex, BIAN‐Fe(C₆H₆) , was synthesized and evaluated for the polymerization of l ‐lactide. Characterization of BIAN‐Fe(C₆H₆) reveals that it is redox non‐innocent and suggests that it is an Fe(I) species bearing a radical‐anionic ligand. We will demonstrate that BIAN‐Fe(C₆H₆) is active for the ring‐opening polymerization of l ‐lactide, and that polymer is produced with, or without, the use of an added external initiator. Interestingly, very high molecular weight polymers are produced in the absence of external initiator whereas polymer molecular weights that agree with theoretical calculations are produced in the presence of external initiator. To the best of our knowledge, BIAN‐Fe(C₆H₆) is the first Fe‐based α‐diimine catalyst reported to be active for the polymerization of l ‐lactide. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2824–2830     

Synthesis of 3-Allyl-4-phosphachromones by Cyclized Coupling of Ethyl o-Hydroxyphenyl(ethynyl)phosphinate with Allyl Bromide

3-Allyl-4-phosphachromones as the phosphorus analogues of chromone were firstly prepared in good yields and high regioselectivity by the palladium(ІІ)-catalyzed cyclized coupling reaction of ethyl o-hydroxyphenyl(ethynyl)- phosphinate with allyl bromide.     

Synthesis and Crystal Structure of the Dicopper(II) Complex [Cu2{Ph2P(=O)(o‐C6H4)CO2}2(THF)2(H2O)2][BF4]2 by Oxidation of [Cu{Ph2P(o‐C6H4)C(=O)H}2(NCMe)][BF4] with Aqueous H2O2

Treatment of [Cu(pcho)₂(NCMe)][BF₄] 1 (pcho = 2‐(diphenylphosphino)benzaldehyde) with aqueous H₂O₂ in THF solvent affords [Cu₂(dpb)₂(THF)₂(H₂O)₂] [BF₄]₂ 2 (dpb = 2‐(diphenylphosphinoxide)‐benzoate) after crystallization from diethyl ether. This reaction involves oxidation of Cu(I) to Cu(II) ion, phosphine to phosphinoxide, and benzaldehyde to benzoate species. The crystal structure of 2 consists of two copper(II) atoms bridged by two carboxylate moieties of the dpb ligands. The coordination about each copper(II) atom is a distorted trigonal bipyramid.     

一种经MCM-41负载双齿膦钯(0)配合物催化的羰基化Suzuki偶联合成二芳酮的新途径

在催化量的MCM-41负载双齿膦钯(0)配合物存在下,芳基碘化物和芳基硼酸、一氧化碳在常压下能顺利进行羰基化Suzuki偶联反应,高产率地生成了各种二芳酮化合物。MCM-41负载双齿膦钯(0)配合物具有比PdCl2(PPh3)2 更高的活性和选择性,且可回收再用10次其活性基本不变,为各种功能化二芳酮的合成提供了方便实用的新途径。     

Synthesis and Structure of K[Cd(O2N‐C6H4‐NNN‐C6H4‐NO2)3], an Anionic 1, 3‐Bis(4‐nitrophenyl)triazenido Complex of Cadmium

The reaction of cadmium acetate in methanol with 1, 3‐bis(4‐nitrophenyl)triazene in THF in the presence of KOH yields K[Cd(O₂NC₆H₄NNNC₆H₄NO₂)₃] in form of hexagonal prismatic, red crystals with the trigonal space group R3¯ and a = 12.229(2), c = 48.988(10) Å and Z = 6. In the anionic cadmium complexes, which are located along the threefold axis, the Cd atoms are coordinated in a trigonal prismatic arrangement by the atoms N(1) and N(3) of three triazenido ligands. The potassium cations are coordinated icosahedrally by oxygen atoms of each one nitro group of six neighbouring anionic complexes. The Cd‐N distances are 2.376(4) and 2.350(4) Å, and the K‐O distances are in the range of 2.833(6) to 3.365(6) Å.     

Synthesis,Reactivity and Crystal Structures of the Palladium(II) Complexes with the Pyrimidine Containing Ligand: Crystal Structures of [Pd(PPh3)(η1‐C4H3N2)(η2‐S2CNC4H8)] and [Pd(PPh3)(η1‐C4H3N2)(η2‐Tp)]

Treatment of Pd(PPh₃)₄ with 5‐bromo‐pyrimidine [C₄H₃N₂Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃)₂(η¹‐C₄H₃N₂)(Br)], 1 , by substituting two triphenylphosphine ligands. In acetonitrile solution of 1 in refluxing temperature for 1 day, it do not undergo displacement of the triphenylphosphine ligand to form the dipalladium complex [Pd(PPh₃)Br]₂{μ,η²‐(η¹‐C₄H₃N₂)}₂, or bromide ligand to form chelating pyrimidine complex [Pd(PPh₃)₂(η²‐C₄H₃N₂)]Br. Complex 1 reacted with bidentate ligand, NH₄S₂CNC₄H₈, and tridentate ligand, KTp {Tp = tris(pyrazoyl‐1‐yl)borate}, to obtain the η²‐dithiocarbamate η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐S₂CNC₄H₈)], 4 and η²‐Tp η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐Tp)], 5 , respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

The synthesis,characterization and polycondensation of metal‐containing diols: crystal structure of [(η5‐C5H5)(CO)2Fe(CH2)3O‐{2,6‐(CH2OH)2‐4‐CH3?C6H2}]

The synthesis of two new transition‐metal‐containing polyesters is described. The precursors are bifunctional organometallic monomers that were synthesized using 2,6‐bis(hydroxymethyl)‐p‐cresol as the key reagent. This was achieved by simple coupling reactions between the appropriate organometallic alkyl halide and the cresol reagent. Polycondensation reactions were carried out with terephthaloyl chloride using ambient temperature solution techniques. The new low molecular weight oligomeric polyesters were characterized using Fourier transform infrared and ¹HNMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis and size‐exclusion chromatography analyses. Copyright © 2002 John Wiley & Sons, Ltd.     

Preparation and Characterization of an Unusual Di-Cobalt Complex; X-Ray Crystal Structure of Co(CO)2(μ-CO)(μ:η2,η4-C4Ph4)Co(CO)2(PPh3)

Reaction of [MoCo(CO)₅(PPh₃)₂(η⁵-C₅H₅)] (1) with diphenylacetylene in tetrahydrofuran at 50 °C yielded two heterobimetallic compounds, [MoCo(CO)₄.(PPh₃){μ-PhC ? CPh}(η⁵-C₅H₅)] (4) and [MoCo(CO)₅{μ-PhC ? CPh} (η⁵-C₅H₅)] (5). However, an unexpected product, Co(CO)₂(μ-CO)(μ:η₂,η⁴-C₄Ph₄)Co(CO)₂(PPh₃) (6), was observed while attempting to grow the crystals for structural determination of 4. The X-ray crystal structure of 6 was determined: triclinic, $ {\rm P}\bar 1 $, a = 11.654(2) Å, b = 12.864(2) Å, c = 13.854(2) Å, α = 89.67(2)°, β = 86.00(2)°, γ= 83.33(2)°, V = 2057.9(6) ų Z=2. In 6, two cobalt fragments are at apical and basal positions of the pseudo-pentagonal pyramidal structure, respectively. The electron count for the apical cobalt fragments is 20, which is rather unusual. It is believed that 6 was formed after the fragmentation and recombination of the fragmented species of 4.     

Synthesis and Crystal Structure of the Binuclear Complex [Pr2(C10H8N2O4)2(C10H9N2O4)2(H2O)4]·3H2O·C6H6

The binuclear praseodymium(III) complex with N‐(1‐carboxyethylidene)‐salicylhydrazide (C₁₀H₁₀N₂O₄, H₂L) was prepared in H₂O‐C₂H₅OH mixed solution, and the crystal structure of [Pr₂L₂(HL)₂(H₂O)₄]·3H₂O·C₆H₆ was determined by X‐ray single crystal diffraction. The crystal complex crystallizes in the triclinic system with space group P‐1, and in the structure each Pr atom is 9‐coordinated by carboxyl O and acyl O and azomethine N atoms of two tridentate ligands to form two stable five‐membered rings sharing one side in keto‐mode and two water molecules. The coordination polyhedron around Pr³⁺ was described as a monocapped square antiprism geometry. In an individual molecule, four tridentate ligands were coordinated by two negative univalent (HL) and two bivalent forms (L) respectively. Two negative univalent ligands were coordinated via μ₂‐bridging mode.     

Reactions of Cyclohexyl Isocyanide with η5‐Substituted Cyclo‐pentadienyl MoMo Triply Bonded Complexes. Crystal Structure of [Mo(CO)2(η5‐C5H4CO2CH3)]2(μ‐η2‐CNC6H11)

Reactions of one or two equiv. of cyclohexyl isocyanide in THF at room temperature with Mo?Mo triply bonded complexes [Mo(CO)₂(η⁵‐C₅H₄R)]₂ (R=COCH₃, CO₂CH₃) gave the isocyanide coordinated Mo? Mo singly bonded complexes with functionally substituted cyclopentadienyl ligands, [Mo(CO)₂(η⁵‐C₅H₄R)]₂(μ‐η²‐CNC₆H₁₁) ( 1a , R=COCH₃; 1b , R=CO₂CH₃) and [Mo(CO)₂(η⁵‐C₅H₄R)(CNC₆H₁₁)]₂ ( 2a , R=COCH₃; 2b , R=CO₂CH₃), respectively. Complexes 1a , 1b and 2a , 2b could be more conveniently prepared by thermal decarbonylation of Mo? Mo singly bonded complexes [Mo(CO)₃(η⁵‐C₅H₄R)]₂ (R=COCH₃, CO₂CH₃) in toluene at reflux, followed by treatment of the resulting Mo?Mo triply bonded complexes [Mo(CO)₂(η⁵‐C₅H₄R)]₂ (R=COCH₃, CO₂CH₃) in situ with cyclohexyl isocyanide. While 1a , 1b and 2a , 2b were characterized by elemental analysis and spectroscopy, 1b was further characterized by X‐ray crystallography.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

1, 3, 4, 4'‐Tetra(triphenylphosphanimin)‐2‐iodo‐2‐butenal‐4‐carboniumiodid, [O=C(NPPh3)C(I)=C(NPPh3)‐C(NPPh3)2]+I‐

Pale yellow single crystals of [O=C(NPPh₃)C(I)=C(NPPh₃)‐C(NPPh₃)₂]⁺I^‐·1.5 thf ( 1 ·1.5 thf) have been obtained by the reaction of INPPh₃ with thallium in thf suspension. They are characterized by IR spectroscopy and by a crystal structure determination. 1 ·1.5 thf crystallizes in the monoclinic space group P2₁/n, Z = 4, lattice dimensions at ‐83?C: a = 1101.7(1), b = 3449.0(2), c = 2000.4(1) pm, β = 104.88(1)?, R₁ = 0.0382. 1 can be understood as a cationic variation of (Z)‐2‐butenale in which all H atoms are substituted by triphenylphosphoraneimine residues and by a iodine atom, respectively.     

Synthesis and Nucleophilic Addition Reactions of Tricarbonyl[η5‐2‐(phenylthio)hexadienyl]iron Hexafluorophosphate

3‐Phenylthio‐3‐sulfolene ( 1 ) was readily converted to a C‐5 substituted product 2 , which upon thermolysis and complexation with Fe₂(CO)₉ gave (η⁴‐diene)iron complexes 3a and 3b . Treatment of 3a and 3b with aq. HPF₆ and Ac₂O provided the title compound 5 , which reacted regio‐ and stereospecifically with some nucleophiles to give the addition products 3b and 7 .     

Synthesis and Crystal Structure of [Nd(η6‐1, 3, 5‐C6H3Me3)‐(AlCl4)3](C6H6) and Structural Comparison of Ln(η6‐arene)‐(AlCl4)3

Reaction of Ndcl₃ with AlCl₃ and mesitylene in benzene gives complex [Nd(η⁶‐1, 3, 5‐C₆H₃Me₃)‐(AlCl₄)₃](C₆H₆) (1) which was characterized by elemental analysis, IR spectra, MS and X‐ray diffractions. The X‐ray determination indicates that 1 has a distorted pentagonal bipyramidal geometry and crystallizes in the monoclinic, space group P2₁/n with a = 0.9586(2), b = 1.1717(5), c = 2.8966(7) nm, β = 90.85 (2)°, V = 3.2529 (6) nm³,D_c= 1.573 g/cm³, Z = 4. A comparison of bond parameters for all the reported Ln (η⁶‐Ar) (AlCl₄)₃ complexes indicates that the bond distance of La? C is shortened with the increasing of methyl group on benzene and with the decreasing of radius of lanthanide ions.     

Structure of tetra[β‐(1,2,4‐triazole‐l‐yl) propiophenone] dichloro nickel(II) solvate hexahydrate complex: [NiCl2(C2H2N3CH2CH2‐COPh)4]·6H2O

The mononuclear complex, [NiCl₂ (trzCH₂CH₂COPh)₄]·6H₂O (trz =1,2,4‐triazole), was synthesized and its structure was determined by single crystal X‐ray determination. It crystallizes in the monoclinic system, space group P2₁/c, with lattice parameters: a = 0.80391(2) nm, b = 1.08215(2) tun, c = 2.90133(2) nm, β = 94.792 (1)° and Z = 2. Each nickel atom is coordinated by four N atoms of triazole from four β‐(1,2,4‐triazole‐1‐yl)propiophenone ligands and two chloride anions in trans arrangement with octahedral coordination geometry. In addition to the coordinating nickel complex, there are six uncoordinated water molecules. The Ni‐Cl distance is 0.24865(8) nm and the Ni‐N distances are in the range of 0.2072(2) to 0.2099(2) nm, respectively. In the solid state, the title compound forms three dimensional network structure through hydrogen bonds. The intermolecular hydrogen bonds connect the [NiCl₂(C₂H₂N₃CH₂CH₂COPh)₄] and H₂O moieties. The deep green crystals were also examined by elemental analysis, FT‐IR and UV spectra, which are in agreement with the structural data.