Analysis of traces of surfactants in water with anion-exchange resin and polymeric adsorbent

Summary Determination of traces of anionic and non-ionic surfactants in water has been based on the quantitative separation of sodium alkylbenzene sulphonate (LAS) from polyoxyethylenealkylphenyl ether (APE) with a weak base anion-exchange resin, and adsorption of APE in filtrate with Amberlite XAD-2 resin. LAS is adsorbed on the anionexchange resin, eluted with hydrochloric acid-methanol and determined spectrophotometrically by methylene blue or UV absorption. APE in the filtrate is adsorbed on XAD-2 resin, eluted with methanol and determined spectrophotometrically by cobalt thiocyanate or UV absorption. Recoveries of surfactants were about 90100%. As little as 0.02 ppm can be determined. In a river water sample 0.06 ppm of LAS and 0.05 ppm of APE and in another case, 0.12 ppm of LAS and 0.07 ppm of APE were found.

---

Spurenanalyse von oberflächenaktiven Substanzen in Wasser mit Hilfe eines Anionenaustauschers und eines Polymeradsorbens

Zusammenfassung Natriumalkylbenzolsulfonat (LAS) kann von Polyoxyethylenalkylphenylether (APE) getrennt werden, indem LAS an einem schwachbasischen Anionenaustauscher und im Filtrat APE an Amberlit XAD-2 adsorbiert wird. LAS wird mit Methanol-HCl eluiert und im Eluat spektralphotometrisch mit Methylenblau oder durch UV-Absorption bestimmt. APE wird mit Methanol eluiert und spektralphotometrisch mit Cobaltthiocyanat oder ebenfalls durch UV Absorption bestimmt. Bei Zusatzversuchen wurden 90–100% wiedergefunden. Bis zu 0.02 ppm können bestimmt werden. In einer Flußwasserprobe wurden 0,06 ppm LAS und 0,05 ppm APE bzw. 0,12 ppm LAS und 0,07 ppm APE gefunden.

     

Determination of hydrogen peroxide by use of an anion-exchange resin modified with manganese tetrakis (sulfophenyl) porphine as a mimesis of peroxidase

The peroxidase-like activity of the modified resin is demonstrated in its use for the determination of hydrogen peroxide by means of the chromogenic reaction with 4-aminoantipyrine and phenol. The sensitivity achieved is 80% of that obtained with peroxidase; the r.s.d, is 1.1%, and the catalyst can be reused without deterioration for up to 10 assays.     

Determination of niacin in infant formula by solid-phase extraction and anion-exchange liquid chromatography.

A peer-verified, solid-phase extraction (SPE)/anion exchange liquid chromatographic method is presented for the determination of niacin in milk-based and soy-based infant formula. Analysis is in 3 steps: test sample digestion, extraction/cleanup, and liquid chromatography (LC). Digestion uses a standard AOAC digestion procedure that involves autoclaving at 121 degrees C for 45 min in (1 + 1) H2SO4 to free endogenous niacin from protein and to convert added niacinamide to niacin. The digest solution is adjusted to pH 6.5 with 7.5M NaOH. Acidification to pH <1.0 with (1 + 1) H2SO4 precipitates the protein. The clarified solution is then filtered, and the filtrate is brought to volume. SPE of niacin is accomplished by passing an aliquot of the digest solution through an aromatic sulfonic acid-SPE (ArSCX-SPE) column. After the column is washed with methanol and water to remove extraneous material, the niacin is eluted with 0.25M sodium acetate/acetic acid buffer at pH 5.6. An anion-exchange polystyrene-divinylbenzene column with 0.1 M sodium acetate/acetic acid buffer at pH 4.0 is used for LC. Niacin is determined by UV detection at 260 nm. A standard curve is prepared by passing known amounts of niacin through the ArSCX-SPE columns used for niacin extraction. The following values for x and relative standard deviation (RSD) were obtained for National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1846 Infant Formula with a certified value for niacin of 63.3 +/- 7.6 microg/g: Submitting laboratory.-- x = 59.7 +/- 4.0 microg/g; RSD = >6.7%; confidence interval (CI) = +/- 1.4 microg/g; n = 27. Peer laboratory.--x = 56.6 +/- 6.6 microg/g; RSD = >11.7%; CI =+/- 4.1 microg/g; n = 8.     

Determination of pesticide residues in soil by modified matrix solid-phase dispersion and gas chromatography

Modified matrix solid-phase dispersion (MMSPD) and gas chromatography have been developed for quantitative analysis of various classes of pesticides (pirimicarb, metalaxyl, metolachlor, isopropalin and pendimethalin) in soil. MMSPD used Florisil as dispersant and acetone as solvent. Determination was carried out by gas chromatography with nitrogen-phosphorus detection (GC-NPD). The effect of the residence time of pesticides in soil on the recoveries was studied. MMSPD was compared with continuous liquid-solid extraction (LSE). MMSPD had good extraction efficiency and cleanup efficiency and the extract obtained could be directly subjected to GC analysis without further purification. The method gave recoveries ranging from 93% to 100% with relative standard deviations (RSDs) lower than 10%. The limits of detection (LODs) ranged from 0.2 to 2.0 ng g(-1).     

竹炭固相萃取-高效液相色谱法测定河水中多环芳烃

建立了竹炭固相萃取-反相高效液相色谱法检测水中16种多环芳烃的方法。通过实验综合分析,选定正己烷为洗脱溶剂,洗脱溶剂体积为15mL,上样速率为5mL/min,上样体积为750mL。此萃取条件下的萃取回收率在50.3%～143.2%之间。经萃取后,方法的最低检出限范围为0.011～0.069μg/L,精密度在3.3%～11%之间。用该法测定河水中多环芳烃的含量,水样的加标回收率在50.3%～138.4%范围内。     

Chemically modified activated carbon with S-benzyldithiocarbazate as a new solid-phase extractant for preconcentration of mercury prior to ICP-AES determination

A new sorbent S-benzyldithiocarbazate (SBDTC) modified activated carbon (AC-SBDTC) was prepared and studied for preconcentration for trace mercury(II) prior to inductively coupled plasma atom emission spectrometry (ICP-AES). The experimental conditions were optimised with respect to different experimental parameters using both batch and column procedures in detail. The optimum pH value for the separation of Hg(II) on the new sorbent was 3, while the adsorption equilibrium was achieved in less than 5?min. Complete elution of the adsorbed metal ions from the sorbent surface was carried out using 5?mL of 0.25?mol?L^?1 of HCl and 2% CS(NH₂)₂. Common coexisting ions did not interfere with the determination. The maximum static adsorption capacity of the sorbent under optimum conditions was found to be 0.55?mmol?g^?1. The detection limit of the present method was found to be 0.09?ng?mL^?1, and the relative standard deviation (RSD) was lower than 2.0%. The procedure was validated by analysing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. This sorbent was successfully employed in the separation and preconcentration of trace Hg(II) from the natural water samples yielding 80-fold concentration factor.     

Determination of hydrogen peroxide with N,N-diethylaniline and 4-aminoantipyrine by use of an anion-exchange resin modified with manganese-tetrakis(sulphophenyl)porphine, as a substitute for peroxidase

Amberlite IRA 900 anion-exchange resin modified with manganese-tetrakis(sulphophenyl)-porphine has been used as a catalyst instead of peroxidase for the determination of hydrogen peroxide by the reaction 2H(2)O(2) + N,N-diethylaniline + 4-aminoantipyrine (catalyst)--> quinonoid dye (lambda(max) 550 nm) + 4H(2)O. The apparent molar absorptivity for hydrogen peroxide was 1.1 x 10(4) 1.mole(-1).cm(-1), coefficient of variation 0.7%. This value is approximately 84% of that obtained by the use of peroxidase as catalyst. Similar conditions to those in the enzymatic reaction were suitable for use of the modified resin as catalyst, and the results show it to be a good substitute for peroxidase in this reaction system.     

Selective solid-phase extraction of catecholamines by the chemically modified polymeric adsorbents with crown ether

A simple and selective one-step solid-phase extraction procedure using chemically modified polymer resin (Amberlite XAD-4) with crown ether was investigated for the measurement of urinary catecholamines. After loading the urine samples (adjusted to pH 4) on the synthesized adsorbent cartridge, the column was washed with methanol followed by water and then the adsorbed catecholamines were eluted by 1.0 mL of 6.0 M acetic acid. The effectiveness of sample clean-up method was demonstrated by reversed-phase ion-pair high-performance liquid chromatography with electrochemical detection. Under optimal condition, the recoveries of epinephrine, norepinephrine, and dopamine from spiked urine sample were >86% for all catecholamines. The detection limits (n=5) for epinephrine, norepinephrine, and dopamine were 37, 52, and 46 nmol/L, respectively.     

Determination of electroactive organic acids by anion-exchange chromatography using a copper modified electrode

An ion-chromatographic method combined with electrochemical detection at a copper-based chemically modified glassy carbon electrode (Cu-GC) has been shown to provide a simple analytical approach for the determination of some common organic acids in alkaline medium. Under the optimized isocratic chromatographic conditions (i.e. 0.1 M NaOH plus 80 mM CH3COONa), organic acids such as gallic, ascorbic, gluconic, lactobionic, galacturonic and glucuronic acid could be separated in less than 20 min. Under constant potential amperometric detection (i.e. 0.55 V vs. Ag-AgCl) the Cu-GC modified electrode allowed detection limits between 2 and 5 pmol for all investigated organic acids while the linear dynamic range spanned generally over three orders of magnitude. Examples of applications included the separation and quantitation of some common organic acids in vinegar, honey and tea samples, are given.     

Determination of thiol compounds by solid-phase extraction using multi-walled carbon nanotubes as adsorbent coupled with high-performance liquid chromatography-fluorescence detection

Microchimica Acta - We describe a method for solid-phase extraction of biogenic thiols using multi-walled carbon nanotubes as adsorbent, and their subsequent determination via HPLC and fluorescence...     

Investigation of the surface of a polymeric adsorbent with pyrene as a fluorescence probe

Pyrene was used as a fluorescence probe to study the surface and pyrene/surface interactions which occur on a polypropylene adsorbent. The surface interaction between this adsorbent and pyrene was found to be very similar to that found for pyrene in hydrocarbon solvents. In contrast to the surfaces of other types of adsorbents, the polypropylene surface presents an energetically homogeneous surface to adsorbing molecules. Consequently, adsorption takes place essentially randomly as opposed to being associated with activated sites.     

Determination of niacin in infant formula and wheat flour by anion-exchange liquid chromatography with solid-phase extraction cleanup

Niacin content must be included on food labels of infant formula products and bakery products containing enriched flour. Liquid chromatographic (LC) determination of niacin in complex food matrixes is complicated by the presence of endogenous compounds that absorb at the commonly used wave-length of 260 nm. Also, the presence of particulate matter in the standard sulfuric acid extraction procedure results in reduced life of LC columns and precolumns. A simple, rapid, solid-phase extraction (SPE) procedure for separation and cleanup of niacin from a complex food matrix digest has been developed. By using a vacuum manifold with the SPE column system, multiple samples can be processed quickly and efficiently for LC analysis, compared with gravimetric column cleanup. Sulfuric acid sample digest is passed over an aromatic sulfonic acid cation-exchange (ArSCX-SPE) or a sulfonated Florisil SPE column. Niacin is eluted with 0.25M sodium acetate-acetic acid, pH 5.6 buffer in vacuo. LC chromatograms of the resulting eluate are free of interference from other components absorbing at 260 nm at the retention time of niacin. Validation of the method was obtained from agreement of analytical results on available reference materials. For both SPE methods, values for niacin in SRM 1846 Infant Formula (milk-based powder) were within uncertainty ranges of the certified value. Use of several calibration procedures (the LC computer program, a peak area response graphic standard curve, or the method of standard additions) with both SPE procedures resulted in niacin values for 3 RM-Wheat Flours (not certified for niacin) in agreement (90-105%) with their respective values reported in the literature. Several commercial wheat flours showed a broad 260 nm interference, resulting in high niacin values. Niacin recoveries from spiked soy-based liquid infant formulas ranged from 95-107% with the ArSCX-SPE column. Calibration curves of niacin were linear up to 400 micrograms/mL, with a detection limit of 0.2 microgram/mL.     

Determination of organophosphorus pesticides in ecological textiles by solid-phase microextraction with a siloxane-modified polyurethane acrylic resin fiber

A novel solid-phase microextraction (SPME) fiber coating was prepared with siloxane-modified polyurethane acrylic resin by photo-cured technology. The ratio of two monomers was investigated to obtain good microphase separation structure and better extraction performance. The self-made fiber was then applied to organophosphorus pesticides (OPPs) analysis and several factors, such as extraction/desorption time, extraction temperature, salinity, and pH, were studied. The optimized conditions were: 15 min extraction at 25 °C, 5% Na₂SO₄ content, pH 7.0 and 4 min desorption in GC inlet. The self-made fiber coating exhibited better extraction efficiency for OPPs, compared with three commercial fiber coatings. Under the optimized conditions, the detection limits of 11 OPPs were from 0.03 μg L⁻¹ to 0.5 μg L⁻¹. Good recoveries and repeatabilities were obtained when the method was used to determine OPPs in ecological textile.     

Determination of anion-exchange resin performance based on facile chloride-ion monitoring by FIA-spectrophotometry with applications to water treatment operation.

Based on a flow-injection spectrophotometry, an automatic analytical method for determination of ppb-level chloride-ion has been established. By use of this method, a novel FIA method for the determination of SBAER performance has also been developed. In this paper, the effects of concentration, dosage, and flow rate of the regenerant on BEC of SBAER were first investigated dynamically by the FIA method. In addition, the flow rate of the sample water and the temperature of the ion exchange resin were also examined. The optimum conditions were obtained: the volume of the regenerant (sodium hydroxide) was 50 mL (0.15 g resin), and its concentration was 3% (w/v); the volumetric flow rates of the regenerant and the sample water were 0.5 ml/min (4.3 m/h) and 1.5 ml/min (13 m/h), respectively. The exchanging temperature was 25 +/- 5 degrees C. The method is characterized by the use of a micro resin-column, shorter testing cycle, easy operation, and high reproducibility. The proposed method is approximately 30 times more efficient than the manual method, and it can be used for the exchange performance comparison of various SBAER.     

Determination of organophosphorus pesticides in soil by headspace solid-phase microextraction

Headspace solid-phase microextraction (SPME) has been developed for the analysis of common organophosphorus pesticides in soil. Factors such as adsorption-time, sampling temperature and matrix modification by addition of water were carefully considered to optimize the extraction efficiency. This technique could achieve limits of detection of 143 ng/g for Malathion and Parathion, and 28.6 ng/g for Phorate, Diazinon and Disulfoton in humic soil when the extracted sample was analyzed by gas chromatography-flame ionization detector (GC-FID). Lower limits of detection of 28.6 ng/g for Malathion and Parathion, and 14.3 ng/g for Phorate, Diazinon and Disulfoton can be achieved by analyzing the extracted sample with gas chromatography/mass spectrometric detector (GC/MS). As the extraction efficiency was generally better when analyzing sandy soil, the limits of detection are envisaged to be even better for such a matrix. The technique was found to be reliable with good precision of about 6.5% RSD for the sandy soil and about 15% for the humic material. The poorer precision of extraction from the humic material is probably related to the poorer homogeneity of this material. The linearity of extraction was good with linear calibration in the range of 0.143 to 28.6 μg/g. Finally, headspace SPME was compared to aqueous extraction of soil followed by SPME (LE-SPME). The recoveries obtained by headspace SPME were comparable to those from liquid-liquid extraction of soil followed by SPME. However, the analysis of headspace SPME has less background interference. Perhaps, the greatest advantage of this technique is its non-destructive nature so that it is possible to perform further laboratory analysis of the samples after headspace SPME has been carried out.     

Determination of organophosphorus pesticides in soil by headspace solid-phase microextraction

Headspace solid-phase microextraction (SPME) has been developed for the analysis of common organophosphorus pesticides in soil. Factors such as adsorption-time, sampling temperature and matrix modification by addition of water were carefully considered to optimize the extraction efficiency. This technique could achieve limits of detection of 143 ng/g for Malathion and Parathion, and 28.6 ng/g for Phorate, Diazinon and Disulfoton in humic soil when the extracted sample was analyzed by gas chromatography-flame ionization detector (GC-FID). Lower limits of detection of 28.6 ng/g for Malathion and Parathion, and 14.3 ng/g for Phorate, Diazinon and Disulfoton can be achieved by analyzing the extracted sample with gas chromatography/mass spectrometric detector (GC/MS). As the extraction efficiency was generally better when analyzing sandy soil, the limits of detection are envisaged to be even better for such a matrix. The technique was found to be reliable with good precision of about 6.5% RSD for the sandy soil and about 15% for the humic material. The poorer precision of extraction from the humic material is probably related to the poorer homogeneity of this material. The linearity of extraction was good with linear calibration in the range of 0.143 to 28.6 μg/g. Finally, headspace SPME was compared to aqueous extraction of soil followed by SPME (LE-SPME). The recoveries obtained by headspace SPME were comparable to those from liquid-liquid extraction of soil followed by SPME. However, the analysis of headspace SPME has less background interference. Perhaps, the greatest advantage of this technique is its non-destructive nature so that it is possible to perform further laboratory analysis of the samples after headspace SPME has been carried out. Received: 13 July 1998 / Revised: 10 November 1998 / Accepted: 17 November 1998     

间氨基酚修饰超高交联吸附树脂的合成及吸附性能

合成了间氨基酚修饰超高交联吸附树脂(MMAR)。用红外光谱等进行表征,并用于吸附水溶液中2-氨基吡啶的研究。热力学研究结果表明,Freundlich吸附等温方程能够对静态吸附等温线进行很好的拟合。吸附焓变ΔH0,其绝对值小于46 KJ.mo-l1,表明以物理吸附为主以及该吸附剂容易脱附的特征;△G0,说明吸附是自发行为;△S0,表明吸附质分子在树脂表面上的运动受到了限制。动力学研究结果表明,吸附符合一级动力学方程,吸附速率随着温度的升高而增大,颗粒内扩散是速率控制步骤之一。表观活化能Ea10 KJ.mo-l1,说明吸附较容易进行。     

单壁碳纳米管固相萃取-气相色谱-质谱联用法测定茶油中6种邻苯二甲酸酯

建立了单壁碳纳米管（SWCNTs）为吸附剂的固相萃取净化-气相色谱-质谱检测茶油中6种邻苯二甲酸酯（PAEs）的分析方法。样品经正己烷稀释,玻璃SWCNTs SPE小柱净化,GC-MS选择离子监测（SIM）模式测定,外标法定量。对正己烷的稀释体积、吸附材料的类型、SWCNTs用量、淋洗液用量、洗脱溶剂类型和体积等影响萃取效率的条件进行了优化,得到的最优萃取条件为：正己烷稀释体积为5 mL,SWCNTs用量为0.6 g,淋洗液为20 mL正己烷,洗脱溶剂为5 mL甲苯。6种PAEs在0.05~1.0 mg/L范围内线性关系良好,相关系数（r）均大于0.9999;在0.05~1.0 mg/kg添加范围内,6种目标物的平均回收率为86.4%~111.7%,相对标准偏差为4.2%~10.4%。该方法准确、快速,可满足茶油中6种邻苯二甲酸酯的检测需要。     

Spectrofluorimetric determination of glutathione in human plasma by solid-phase extraction using graphene as adsorbent

An efficient solid phase extraction-spectrofluorimetric method using graphene as adsorbent was developed to sensitively determine glutathione (GSH) in biological samples. Fluorescent probe N-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-yl)methyl)iodoacetamide (BODIPY Fl-C1-IA) was applied for the derivatization of GSH. The procedure was based on BODIPY Fl-C1-IA selective reaction with GSH to form highly fluorescent product BODIPY Fl-C1-IA-GSH, its extraction to the graphene-packed SPE cartridge and spectrofluorimetric determination. Some factors affecting the extraction efficiency, such as the type of the eluent and its volume, sample pH, extraction time, and sample volume were optimized. Comparative studies were also performed between graphene and other adsorbents including C18 silica, graphitic carbon, and multi-walled carbon nanotubes for the extraction of analyte. The calibration graph using the pretreatment system for GSH was linear over the range of 0.5-200 nM. The limit of detection was 0.01 nM (signal-to-noise ratio=3). Relative standard deviation for six replicate determinations of GSH at 80 nM concentration level was lower than 5.0%. The developed method was applied to the determination of GSH in human plasma with recoveries of 92-108%. This work revealed the great potentials of graphene as an excellent sorbent material in the analysis of biological samples.     

Engineered biochar modified with iron as a new adsorbent for treatment of water contaminated by selenium

The purpose of this study was to develop an efficient method of biochar modification for effective removal of Se(VI) ions from water. Commercially available biochar produced from wheat straw was impregnated by Fe(NO₃)₃ (0.8, 4 and 10% w/v) and pyrolyzed at 200 °C. Optimum pH, adsorption kinetics, and Se(VI) adsorption isotherms were determined for the studied biochars. The modification significantly increased biochar’s ability for Se(VI) adsorption. The biochar modified with 10% Fe(NO₃)₃ has the highest adsorption effectiveness. The experimentally determined maximum adsorption capacity for the biochar modified with 10% Fe(NO₃)₃ was 14.3 mg g⁻¹ for pH 5, which was the optimum pH value. X-Ray Photoelectron Spectroscopy (XPS) and Photoacoustic Fourier Transform Infrared Spectroscopy (FTIR-PAS) investigation confirmed the presence of iron oxides/hydroxides on the surface of the modified biochar. The modification also resulted in the formation of oxygen containing functional groups. The study proved that the proposed modification can be efficient in increasing the biochar effectiveness in removing Se(VI) from water.