Field asymmetry of the dynamic gain coefficient in organic photorefractive devices

The performance of amorphous organic photorefractive materials in holographic two-beam coupling experiments in the typical tilted geometry was found to be asymmetric with respect to the applied electric field direction. For one field direction, light is coupled into the polymer layer and can be detected on the side of the devices. For the other, the originally Gaussian-shaped writing beams show a shoulder or even split into two. The strength of the asymmetry depends on the diameter of the beams writing the hologram. We demonstrate that this effect is due to beam fanning. As a result of the fanning, the apparent photorefractive gain coefficients take on unphysical values.     

Transient energy transfer during hologram formation in LiNbO3 in external electric field

Volume phase hologram recording in pure LiNbO₃ crystals with applied electric field E ≈ 5 kV/cm is accompanied by considerable intensity redistribution of the writing beams by transient energy transfer. Practically the whole intensity of the donor beam may be transferred into the weak acceptor beam with initial intensity 3% from total incident intensity. This effect originates from transient phase mismatch of the recorded phase grating and fringe pattern in the applied electric field when the interacting beams have different intensities.     

All-optical image switch based on bacteriorhodopsin film

While two waves are coupled in bacteriorhodopsin (bR) film, a beam of incident light carrying the image is transferred to two diffraction beams whose intensities can increase from zero to a maximum and then decrease to a stable value with the increase of the writing time. Based on the relation among the polarization states of image in a recording beam and diffraction beams, we have proposed and demonstrated the all-optical image transfer switch which depends on the effective time and has the function that within the effective time, a polarization state image is automatically transferred to two images whose polarization states are perpendicular, and the transfer stops automatically beyond the effective time. A time-dependent all-optical image switch with muti-outputs is implemented.     

KTa_(1-x)Nb_xO_3:Cu晶体中直流空间电荷场的进一步研究

分别用扩束光和一束写入光对KTa_(1-x)Nb_xO_3:Cu(X=0.32)晶体中的光折变栅进行擦洗,通过不同的擦洗效果,进一步论证了在写入过程中除了形成周期分布的空间电荷场之外,同时还形成了直流空间电荷场.并对直流空间电荷场被擦洗的动态过程进行了详细研究.此外,在写入之前利用一束均匀光照射在外加电场作用下的KTa_(1-x)Nb_xO_3:Cu晶体,研究了直流空间电荷场的形成对衍射信号强度的影响.     

Ce:KNSBN光折变晶体光栅衍射特性研究

研究了Ce:KNSBN光折变晶体两波耦合作用写入体光栅的衍射效率与写入光偏振态和光强比的关系, 分析了写入光偏振态造成光栅衍射效率差别的原因, 并用修正耦合波理论对实验结果进行了拟合。 实验结果为Ce:KNSBN晶体在全息记录和光学信息处理领域的应用提供了依据。     

Gaussian beam decomposition of high frequency wave fields

In this paper, we present a method of decomposing a highly oscillatory wave field into a sparse superposition of Gaussian beams. The goal is to extract the necessary parameters for a Gaussian beam superposition from this wave field, so that further evolution of the high frequency waves can be computed by the method of Gaussian beams. The methodology is described for R^d${\mathbb{R}}^d$ with numerical examples for d=2$d=2$. In the first example, a field generated by an interface reflection of Gaussian beams is decomposed into a superposition of Gaussian beams. The beam parameters are reconstructed to a very high accuracy. The data in the second example is not a superposition of a finite number of Gaussian beams. The wave field to be approximated is generated by a finite difference method for a geometry with two slits. The accuracy in the decomposition increases monotonically with the number of beams.     

Photonic band gap of three dimensional magnetized photonic crystal with Voigt configuration

We study Bessel beams of two-level atoms that are driven by a linearly polarized laser field. Starting from the Schrödinger equation, we determine the states of two-level atoms in a plane-wave field respecting propagation directions both of the atom and the field. For such laser-driven two-level atoms, we construct Bessel beams beyond the typical paraxial approximation. We show that the probability density of these atomic beams obtains a non-trivial, Bessel-squared-type behavior and can be tuned under the special choice of the atom and laser parameters, such as the nuclear charge, atom velocity, laser frequency, and propagation geometry of the atom and laser beams. Moreover, we spatially and temporally characterize the beam of hydrogen and selected (neutral) alkali-metal atoms that carry non-zero orbital angular momentum (OAM). The proposed spatiotemporal Bessel states (i) are able to describe, in principle, twisted states of any two-level system which is driven by the radiation field and (ii) have potential applications in atomic and nuclear processes as well as in quantum communication.     

Incoherent light-induced self-organization of molecules

Although coherent light is usually required for the self-organization of regular spatial patterns from optical beams, we show that peculiar light-matter interaction can break this evidence. In the traditional method of recording laser-induced periodic surface structures, a light intensity distribution is produced at the surface of a polymer film by an interference between two coherent optical beams. We report on the self-organization followed by propagation of a surface relief pattern. It is induced in a polymer film by using a low-power and small-size coherent beam assisted by a high-power and large-size incoherent and unpolarized beam. We demonstrate that we can obtain large size and well-organized patterns starting from a dissipative interaction. Our experiments open new directions to improving optical processing systems.     

Interferometric phase microscopy using slightly-off-axis reflective point diffraction interferometer

An interferometric phase microscopy (IPM) is proposed using slightly-off-axis reflective point diffraction interferometry for quantitative phase imaging. A retro-reflector consisting two mirrors is used to generate an angle between the object beam and reference beam, and a 45° tilted polarizing beam splitter is used to split the horizontal and vertical components of the both beams. Two carrier interferograms with π/2 phase-shift can be acquired in one shot, and the phase distribution of a thin specimen can be retrieved using a fast reconstruction method. The new IPM without loss in the utilization of the input-plane field of view combines the real time and optimizing detector bandwidth measurement benefit associated with slightly-off-axis method, high stability associated with common path geometry, and simplicity in terms of procedure and setup. Experiments are carried out on both static and dynamic specimens to demonstrate the validity and stability of the proposed method.     

Fe:LiNbO_3晶体光折变性能分析计算

掺铁铌酸锂晶体的光折变性能 ,一方面取决于晶体材料制备时的工艺条件和参数 ,另一方面和记录光路布置及晶体光轴的选取密切相关。给出了常用的 90°记录光路中光折变晶体折射率调制度的计算方法和公式 ,并分析了写入光的偏振方向、晶体光轴 (C轴 )方向及全息图折射率调制度之间的关系。     

Generation of the basis sets for multi-Gaussian ultrasonic beam models--an overview

By using a small number of Gaussian basis functions, one can synthesize the wave fields radiated from planar and focused piston transducers in the form of a superposition of Gaussian beams. Since Gaussian beams can be transmitted through complex geometries and media, such multi-Gaussian beam models have become powerful simulation tools. In previous studies the basis function expansion coefficients of multi-Gaussian beam models have been obtained by both spatial domain and k-space domain methods. Here, we will give an overview of these two methods and relate their expansion coefficients. We will demonstrate that the expansion coefficients that have been optimized for circular piston transducers can also be used to generate improved field simulations for rectangular probes. It will also be shown that because Gaussian beams are only approximate (paraxial) solutions to the wave equation, a multi-Gaussian beam model is ultimately limited in the accuracy it can obtain in the very near field.     

贝塞尔-高斯涡旋光束相干合成研究

基于相干合成技术,提出了对特定离散空间分布的高斯光束阵列加载离散涡旋相位生成二阶贝塞尔-高斯(Bessel-Gaussian,BG)涡旋光束的方案.利用干涉法、桶中功率和相关系数对合成BG涡旋光束的拓扑荷、光束质量进行了定量评价及参数优化.结果表明:基于相干合成技术能够产生特定的目标BG涡旋光束,阵列子光束紧密排布时合成BG光束的光束质量更高.该方法的提出对于其他涡旋光束的产生或者涡旋光束功率的提高具有一定的参考意义.     

A novel design for high gain lens antennas with homogeneous media

A high gain lens antenna is designed by using a new transformation different from the discrete optical transformation. The antenna is composed of two blocks. Each block is made of homogenous and anisotropic materials, and thus can be easily achieved by metamaterial. The numerical results based on full wave simulation indicate that the antenna can be used to realize highly directive radiation beam, and the direction of radiation beam can be controlled artificially by changing the geometry parameters of the device. The electromagnetic field in the transformation region can be either stretched or compressed along both transverse and longitudinal directions by varying the geometry parameters in the virtual space while the distribution of electromagnetic field outside the antenna is little influenced. Moreover, effective medium theory is applied to realize such an antenna with isotropic materials. Also, the multi-beams antenna is investigated. It is indicated that this antenna can generate multi-collimated beams radiating at the desired angles.     

Generation of high-current relativistic electron beams with stable (for a microsecond) parameters using explosive emission cathodes

Cold explosive emission cathodes, in which a plasma serves as an emitting surface, are used to generate relativistic electron beams with a high current density in a magnetic field. The plasma parameters change within a microsecond, thereby significantly changing the geometry of the electron beam. This paper is a review of techniques for stabilizing the geometry of microsecond high-current relativistic electron beams. It is shown that only a transverse-blade explosive emission cathode in a magnetically insulated diode can generate such beams (500 keV, 3 kA) the current density profile and electron trajectory pitch factor of which remain constant for a microsecond.     

Multiplexed phase-conjugate holographic data storage with a buffer hologram

We describe and demonstrate a volume holographic storage system in which a phase-conjugate object beam is reconstructed by the same reference beam that was used for recording. An intermediate hologram is used as a temporary buffer, recorded with its own reference beam and the data-bearing object beam. Reading this buffer hologram with the phase conjugate of its reference beam reconstructs the phase conjugate of the object beam, which can then be recorded into the desired volume hologram for long-term storage. This method combines the immunity to lens aberrations provided by phase-conjugate readout with the simplicity of using the same multiplexed reference beam for both recording and readout. Only a single pair of phase-conjugate reference beams is required. Experimental results are shown with a single LiNbO(3):Fe crystal used as both buffer and storage holograms and a self-pumped phase-conjugate mirror in BaTiO(3) that provides the pair of phase-conjugate reference beams.     

Beam Polarization Dependence of Diffraction Efficiency in Photorefractive LiNb03 Crystal

In weak doped photorefractive LiNbO3 crystal, the diffraction efficiency is highly relevant to the writing and reading beam polarizations. In this paper, based on dynamic coupled-wave equations, we theoretically discuss the diffraction efficiency under four writing and reading polarization conditions, then reach the proven conclusion that with o-polarized beams to write and with e-polarized beam to readout, the diffraction is the largest.     

Dynamical tunneling of counterpropagating beams mediated by an optical photonic lattice

In a numerical study, we demonstrate the dynamical tunneling (DT) of two counterpropagating (CP) mutually incoherent beams in a two-dimensional photonic lattice, recorded in a photorefractive (PR) crystal. The beams are launched head-on from the opposite faces of a PR crystal in which an optically induced two-dimensional photonic lattice is established. The DT is caused by the spontaneous symmetry breaking of CP beams, which is induced by the nonlinear interaction between the beams and is mediated by the lattice. To observe DT we found no need to introduce a specific external tilt potential, as is done in the conventional Zener tunneling; the tilting is provided by the repulsive interaction between the beams, which causes ejection of one beam from the launching region of the other. As the beams propagate, they move laterally in real time, causing the leakage of radiation from the first Brillouin zone to the second and higher zones. In the process the beams also tunnel from the first photonic band zone to the higher zones, which by definition is the DT.     

Beam Polarization Dependence of Diffraction Efficiency in Photorefractive LiNb03 Crystal

In weak doped photorefractive LiNbO3 crystal, the diffraction efficiency is highly relevant to the writing and reading beam polarizations. In this paper, based on dynamic coupled-wave equations, we theoretically discuss the diffraction efficiency under four writing and reading polarization conditions, then reach the proven conclusion that with o-polarized beams to write and with e-polarized beam to readout, the diffraction is the largest.     

菌紫质同线偏振全息记录时再现光偏振方向对衍射效率的调制

当用相同偏振方向的物光和参考光在菌紫质薄膜上记录光栅时,再现光的偏振方向会影响其衍射效率.采用琼斯矩阵方法对此进行了理论分析,结果显示,再现光的偏振方向对衍射光的光强产生余弦调制;当再现光的偏振方向平行或垂直于记录光的偏振方向时,衍射光仍为线偏振光,其他情况下衍射光均变成椭圆偏振光.再现光偏振方向对衍射效率峰值的调制为正向余弦调制,对衍射效率稳定值的调制为反向余弦调制(与前者在相位上相差π).加入辅助紫光可抑制光栅的饱和,从而使得再现光偏振对衍射效率稳定值的调制由反向余弦调制变为正向余弦调制,并且提高了衍 关键词： 菌紫质 光致各向异性 衍射效率 琼斯矩阵     

Beam Polarization Dependence of Diffraction Efficiency in Photorefractive LiNbO_3 Crystal

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｎｐｈｏｔｏｒｅｆｒａｃｔｉｖｅｃｒｙｓｔａｌ,ｍａｎｙａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｉｍａｇｅａｍｐｌｉｆｉｃａｔｉｏｎａｎｄｉｍａｇｅｓｔｏｒａｇｅ ,ｎｅｅｄｔｏｕｓｅｔｈｅｐｒｏｐｅｒｔｙｏｆｈｉｇｈｄｉｆｆｒａｃｔｉｏｎｅｆｆｉｃｉｅｎｃｙ .Ｓｏｍｅａｕｔｈｏｒｓ[1] ｈａｖｅｒｅｆｅｒｒｅｄｔｈａｔｈｉｇｈｄｉｆｆｒａｃｔｉｏｎｅｆｆｉｃｉｅｎｃｙｉｎｐｈｏｔｏｒｅｆｒａｃｔｉｖｅＬｉＮｂＯ3ｃｒｙｓｔａｌｃａｎｂｅｏｂｔａｉｎｅｄｂｙｗｒｉｔｉｎｇ…