温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

温度和pH值双敏感的生物相容性三嵌段共聚物聚(2-乙基-2- 唑啉)-b-聚(ε-己内酯) -b-聚(L-谷氨酸)的合成和表征

研究了由温敏的聚(2-乙基-2-噁唑啉)和pH值敏感的聚(L-谷氨酸)组成的三嵌段共聚物,聚(2-乙基-2-噁唑啉)-b-聚(ε-己内酯)-b-聚(L-谷氨酸)的合成方法,(1)以对甲苯磺酸甲酯为引发剂引发2-乙基-2-噁唑啉进行正离子开环聚合反应,得到了羟基封端的聚(2-乙基-2-噁唑啉)(PEOz-OH);(2)以PEOz-OH为引发剂,以辛酸亚锡为催化剂,在氯苯中合成了PEOz-b-聚(ε-己内酯)两嵌段共聚物(PEOz-b-PCL-OH);(3)将PEOz-b-PCL-OH末端的羟基转换为氨基,得到氨基封端的两嵌段共聚物(PEOz-b-PCL-NH2);(4)以PEOz-b-PCL-NH2为引发剂引发γ-苄基-L-谷氨酸-N-羧酸酐(BLG-NCA)开环聚合,得到了PEOz-b-PCL-b-聚(γ-苄基-L-谷氨酸)(PEOz-b-PCL-b-PBLG)三嵌段共聚物;(5)以HBr的醋酸溶液为脱保护剂脱去苄基保护基,得到PEOz-b-PCL-b-聚(L-谷氨酸)(PEOz-b-PCL-b-PLGlu)三嵌段共聚物.采用1H-NMR、GPC和FT-IR表征了各步聚合物的结构、分子量和分子量分布.     

无机盐对氟烷基封端的嵌段共聚物在水相聚集行为的影响

以含氟醇钾盐(NFHO-K )作为引发剂,通过阴离子活性聚合方法合成了氟烷基封端的聚甲基丙烯酸-2-(二甲氨基)乙酯-block-聚甲基丙烯酸-2-(二乙氨基)乙酯嵌段共聚物(NFHO-PDMA-b-PDEA).该共聚物与一般的含氟嵌段共聚物相比,既具有优良的表面活性,又具有较好的溶解性.通过对溶液表面张力的测定,荧光探针法对溶液临界聚集浓度(cac)的测定和透射电子显微镜(TEM)对共聚物在溶液中胶束形态的研究,发现无机盐对共聚物在水溶液中的聚集行为有明显的影响,并可以增强共聚物的表面活性.     

聚丙烯-聚乙烯嵌段共聚物的分子结构及性能的研究

本工作用核磁共振(~(13)C-NMR)、示差扫描量热(DSC)、动态力学分析(DMA)和扫描电子显微镜(SEM)等技术研究了将丙烯、乙烯单体两步分段共聚、预期为聚丙烯-聚乙烯嵌段共聚物的合成物(简称为聚丙烯-聚乙烯嵌段共聚物或嵌段共聚物)。结果表明,在嵌段共聚物中含有一定量的、能为正庚烷抽提出来的乙丙无规共聚物(EPR);分段共聚的产物并非预想的PP-b-PE两嵌段共聚物,而是含有多种组分的共混物;形态表征的结果表明了嵌段共聚物为多相体系,EPR和PE形成分散相以球形无规分布于PP基体中。     

以二硫键连接的两嵌段共聚物的制备新方法

报道了一种制备二硫键连接的两嵌段共聚物的新方法.以可逆加成-断裂链转移自由基聚合(RAFT)制备聚苯乙烯大分子链转移剂(PS-RAFT),经伯胺还原得到巯基封端的PS(PS-SH).PS-SH与原子转移自由基聚合(ATRP)引发剂2-溴-2-甲基丙酸-2-(2-吡啶基二硫)乙酯发生交换反应,得到含有二硫键的聚苯乙烯大分子ATRP引发剂(PS-S-S-Br).以PS-S-S-Br引发甲基丙烯酸-2-羟基乙酯(HEMA)的ATRP聚合反应,合成了由二硫键连接的两嵌段共聚物PS-S-S-PHEMA.将PS-S-S-PHEMA可在甲醇中自组装形成以PS为核,PHEMA为壳的球形聚合物胶束,为制备新型含二硫键聚合物提供了新的合成方法.     

利用双功能β-二亚胺锌催化剂正交构建丙交酯-苯乙烯嵌段共聚物

设计合成了一种双功能的β-二亚胺锌((BDI)Zn)催化剂,其具有2-溴异丁酸酯引发基团,该基团结合了引发内酯的开环聚合(ROP)和乙烯基单体的原子转移自由基聚合(ATRP)的能力.此催化剂由单晶X射线衍射和核磁表征确定其化学结构.利用这种催化剂可以实现一锅一步法构建极性聚烯烃/聚酯嵌段共聚物,即在光照射下通过β-二亚胺锌((BDI)Zn)催化剂以正交聚合路径来同时实现乙烯基自由基聚合和环内酯开环2种嵌段相的构筑,从而提供了一种有效的途径来制备聚酯/极性聚烯烃嵌段共聚物.利用此法可构建多种聚酯/极性聚烯烃嵌段共聚物,包括聚苯乙烯-嵌段-聚丙交酯(PS-b-PLA)、聚甲基丙烯酸甲酯-嵌段-聚丙交酯(PMMA-b-PLA),以及聚苯乙烯-嵌段-聚己内酯(PS-b-PCL).且这些嵌段共聚物具有可控的分子量和组成,凝胶渗透色谱(GPC)显示单峰和窄分子量分布(M_w/M_n1.5).此双功能催化剂及对应合成策略为极性聚烯烃/聚酯等嵌段共聚物提供了一种简便的构建方案.     

苯乙烯基封端反应性等规聚丙烯的催化合成及其在构筑新型拓扑结构聚丙烯高分子中的应用

在具有高度等规定向能力的rac-Me2Si(2-Me-4-Ph-Ind)2ZrCl2/MAO催化体系所催化的丙烯聚合反应中,通过控制聚合条件,实现聚合物链选择性地向对双苯乙烯单体的链转移反应,合成出一种新的苯乙烯基封端的反应性等规聚丙烯.以这种苯乙烯基封端反应性聚丙烯为结构单元,构筑了两种拓扑结构(接枝和星型)的聚丙烯共聚物,一是在CpTiCl3/MAO催化下,与苯乙烯小分子进行配位聚合,合成了以间规聚苯乙烯为主链、等规聚丙烯为侧链的接枝共聚物(sPS-g-iPP);二是选择性地在链端苯乙烯基上进行氯化和取代反应,定量地将叠氮基团引入等规聚丙烯链端,再与多炔基偶合剂进行点击反应,合成了星型等规聚丙烯.     

以高顺式聚丁二烯为软段的三嵌段共聚物的制备

从高顺式端羟基聚丁二烯(HTPB)出发,分别以ε-己内酯和苯乙烯为单体合成了2类以高顺式聚丁二烯为软段的三嵌段共聚物.以高顺式HTPB为大分子引发剂、辛酸亚锡为催化剂,引发ε-己内酯的开环聚合,合成了聚己内酯-b-聚丁二烯-b-聚己内酯三嵌段共聚物(CLBCL);通过高顺式HTPB末端羟基与2-溴代异丁酰溴(BBi B)间的酯化反应制备了ATRP大分子引发剂(Bi B-PB-Bi B),进而引发苯乙烯进行电子转移活化再生催化剂原子转移自由基聚合(ARGET ATRP)反应,合成了聚苯乙烯-b-聚丁二烯-b-聚苯乙烯三嵌段共聚物(SBS),反应具有较好的可控性,产物分子量分布较窄.通过红外光谱(FTIR)、核磁共振氢谱(1H-NMR)和碳谱(13CNMR)、热重分析(TGA)和示差扫描量热分析(DSC)等对所制备共聚物的结构和性能进行了测试表征.TGA曲线表明,提高聚己内酯链段的含量,可在一定程度上提高CLBCL共聚物的热稳定性;SBS共聚物的热分解过程表现为一个阶段,与HTPB相比,其热稳定性略有提高.从CLBCL共聚物的DSC曲线上可明显观察到聚丁二烯链段的玻璃化转变温度和聚己内酯链段的熔点;SBS共聚物具有2个玻璃化转变温度,为–104.1和102.4oC,分别对应于聚丁二烯链段和聚苯乙烯链段的玻璃化转变温度.     

聚(苯乙烯-丁二烯-苯乙烯)三嵌段共聚物链结构的研究

<正> 以丁基锂引发二步加料法制备聚(苯乙烯-丁二烯-苯乙烯)三嵌段共聚物(简称SBS),往往在共聚物的中间链段聚丁二烯段中含有少量苯乙烯,即中间链段末端含有部份无规丁苯,得不到很纯的三嵌段共聚物,本文用超导核磁共振仪(H~1-NMR)、傅立叶红外光谱仪(FT-IR)、粘弹谱仪研究了上述SBS链结构,发现非嵌段苯乙烯芳环质子共振峰由二     

β-CD聚轮烷嵌段共聚物的制备及其溶致响应性

在20℃水溶液中,选用PMDETA/Cu(Cl)为催化剂,以2-溴代异丁酰基封端的PPO-PEO-PPO三嵌段共聚物与β-环糊精(β-CD)形成的聚准轮烷(PPR)作为引发剂引发丙烯酸羟乙酯(HEA)发生非均相ATRP反应.1H-NMR,GPC,FTIR,WXRD,DSC以及TGA测试表明,PHEA已连接到PPR两端生成了具有管道结晶结构的聚轮烷嵌段共聚物.聚轮烷中β-CD上链量以及PHEA链段聚合度能通过改变其投料摩尔比予以调控.观察到经过用水透析处理后的聚轮烷,β-CD只停留在PPO链段上.而经DMF溶解和无水乙醚沉淀后,大约有1/3的β-CD滑向中间的PEO链段上.表明该聚轮烷嵌段共聚物具有溶致响应性.     

可逆加成-断裂链转移方法合成两亲液晶嵌段功能大分子及其自组装的研究

采用可逆加成-断裂链转移(RAFT)可控聚合反应方法,合成制备了一系列窄分子量分布、结构规整的两亲液晶嵌段功能大分子聚甲基丙烯酸亚己基胆固醇酯-b-聚甲基丙烯酸羟乙酯(PMA6Chol-block-PHEMA).运用核磁共振(NMR)、凝胶渗透色谱仪(GPC)、示差扫描热分析仪(DSC)和热失重分析仪(TGA)对制备所得两亲嵌段功能大分子的化学结构、热物理性能以及液晶相结构与转变温度进行了研究.在此基础上,采用纳米沉淀法研究了所得系列液晶嵌段功能大分子在混合溶剂中的自组装,制备得到微米尺度球形组装体.研究结果表明刚性胆固醇液晶共聚单元的存在对于溶液自组装产生重要影响.     

Synthesis of Propylene Diblock Copolymers via Metallocene and Borane Chemistry

An isotactic chain end unsaturated polypropylene was prepared by the homogeneous metallocene catalyst Et(Ind)₂ZrCl₂ with MAO. Herein, the chain end unsaturated polypropylene proceeded the hydroboration reaction to prepare borane‐containing polypropylene. The borane‐containing polypropylene could be transformed to hydroxyl‐terminated polypropylene, PPOH. And then the polypropylene‐nylon 6 diblock copolymer, PP‐b‐NY6, was synthesized from telechelic PPOH by converting this prepolymer with toluene diisocyanate and using the resulting materials as macroactivators for anionic caprolactam polymerization. Meanwhile, this investigation used borane‐containing polypropylene and oxygen to produce free radicals at the chain end on the polypropylene. Experimental results indicate that the free radical is an effective initiator for the polymerization of methyl methacrylate to produce diblock PP‐b‐PMMA. The block copolymers are characterized by IR, NMR, and DSC analyses. The diblock copolymer is a good compatibilizer for polymer blends.     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

PDMS-b-PEO两亲性嵌段共聚物的合成及溶液性质

通过正丁基锂(n-BuLi)引发的六甲基环三硅氧烷(D3)阴离子开环聚合以及单硅氢封端聚二甲基硅氧烷(PDMS)与烯丙基聚氧乙烯醚(PEO)的硅氢加成反应, 合成得到了一系列分子量分布窄的PDMS-b-PEO两亲性嵌段共聚物. 利用凝胶渗透色谱(GPC)、傅里叶变换红外(FTIR)光谱、氢核磁共振谱(1H-NMR)表征了嵌段共聚物的结构组成. 通过表面张力仪测定得到了不同结构嵌段共聚物的平衡表面张力及临界胶束浓度(cmc). 结果显示, 该系列嵌段共聚物的cmc值不仅受到憎水性嵌段的影响, 同时也受嵌段共聚物的体积效应以及嵌段共聚物的几何形状(即嵌段共聚物各嵌段的比例)的影响, PDMS-b-PEO两嵌段共聚物的cmc值表现出了随憎水嵌段增加而相应增加的趋势. 通过透射电子显微镜(TEM)表征发现, PDMS-b-PEO嵌段共聚物在选择性溶剂水中会自组装形成球状、棒状以及囊泡状的聚集体.     

Synthesis of zwitterionic block copolymers via RAFT polymerization

A series of poly [2-(dimethylamino)ethyl methacrylate (DMA)-sodium acrylate (SA)] diblock copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization exhibits controlled characters: well-controlled molecular weight, narrow molecular weight distribution, molecular weight increasing with polymerization time. The zwitterionic diblock copolymers show rich solution behaviors. Dynamic light scattering (DLS) indicated the formation of micelles and reverse micelles of copolymers is affected by net charge density of copolymers. Microcalorimetry studies showed that the lower critical solution temperature (LCST) increases with incorporation of hydrophilic segments in buffer.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers. II

Poly(ethylene oxide)-b-poly(L-lactic acid) (PEO-PLLA) diblock copolymers were synthesized via a ring opening polymerization from poly(ethylene oxide) and l -lactide. Stannous octoate was used as a catalyst in a solution polymerization with toluene as the solvent. Their physicochemical properties were investigated by using infrared spectroscopy, ¹H-NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry, as well as the observational data of gel-sol transitions in aqueous solutions. Aqueous solutions of PEO-PLLA diblock copolymers changed from a gel phase to a sol phase with increasing temperature when their polymer concentrations are above a critical gel concentration. As the PLLA block length increased, the gel-sol transition temperature increased. For comparison, diblock copolymers of poly(ethylene oxide)-b-poly(l -lactic acid-co-glycolic acid) [PEO-P(LLA/GA)] and poly(ethylene oxide)-b-poly(dl -lactic acid-co-glycolic acid) [PEO-P(DLLA/GA)] were synthesized by the same methods, and their gel-sol transition behaviors were also investigated. The gel-sol transition properties of these diblock copolymers are influenced by the hydrophilic/hydrophobic balance of the copolymer, block length, hydrophobicity, and stereoregularity of the hydrophobic block of the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2207–2218, 1999     

环氧丙烷聚醚三元醇/聚乳酸嵌段共聚物的合成与性能

以低不饱和度环氧丙烷聚醚三元醇与L型及DL型丙交酯为原料, 合成了不同单体物质的量比的聚醚与聚乳酸嵌段共聚物. 采用FTIR, 1H NMR, GPC对共聚物的结构进行了表征; 用DSC, DTA对共聚物的玻璃化转变温度、熔点及热分解温度进行了研究. 结果表明, 丙交酯在聚醚多元醇端羟基的引发下发生开环反应, 得到聚环氧丙烷L型乳酸(POLLA)或聚环氧丙烷DL型乳酸(PODLA)二嵌段共聚物. POLLA二嵌段共聚物具有结晶能力, 且随着L型聚乳酸链段的增长而增强. PODLA二嵌段共聚物为非晶态聚合物. 两种共聚物的玻璃化转变温度与共聚物的组成有关, 其值介于聚醚和聚乳酸玻璃化转变温度之间. 与聚醚三元醇相比, 二嵌段共聚物的耐热性得到提高, 其热分解温度提高了30～60 ℃, 约为235～262 ℃. 共聚物的结构和组成对材料的热降解机制有很大影响. PODLA在高温区发生热氧化降解.     

Preparation and thermal properties of a novel flame retardant copolymer

A monomer, acryloxyethyl phenoxy phosphorodiethyl amidate (AEPPA), was synthesized and characterized using Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance spectroscopy (¹H NMR) and ³¹P NMR. The copolymer with various amounts of styrene (St) was obtained by the free radical bulk polymerization between AEPPA and St, and characterized using ¹H NMR. The thermal properties of the copolymers were investigated with thermogravimetric analysis (TGA) in air and nitrogen atmosphere, and differential scanning calorimetry (DSC). The TGA results in air indicated the copolymers with AEPPA show higher thermal stability than those without AEPPA. However, the TGA results in nitrogen showed that the decomposition temperature decreased and the char residue increased with the increase of AEPPA. The glass transition temperature (T_g) of the copolymers from DSC indicated that a inverse proportion was observed between T_g and the amount of AEPPA incorporated. The flammability of the copolymers was evaluated by microscale combustion calorimeter (MCC). The MCC results showed that AEPPA can decrease the peak heat release rate (PHRR) and the heat release capacity (HRC), and the sample CP10 shows the lowest PHRR and HRC.     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.     

Random and AB diblock copolymers of tricyclodecanemethanol urethane methacrylate with styrene: Synthesis and morphology characterization

A monomer design having a bulky terminal tricyclodecane (TCD) unit linked via hydrogen bondable urethane to an ethyleneoxy methacrylate unit, and capable of generating three‐dimensional honeycomb patterns upon solvent casting has been investigated. Random copolymers as well as a diblock copolymer Poly(Sty₄₂‐b‐TCD₁₈) of this monomer with styrene were prepared by free‐radical polymerization route and atom transfer radical polymerization (ATRP) route. Morphology characterization was carried out using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Particle size was measured by dynamic light scattering measurements (DLS). Irrespective of the wide differences in molecular weight and polydispersity index values, the random copolymers having TCD content >30 mol % were found to form microporous films upon solvent casting from a THF/water 9:1 solvent combination. The amount of TCD in the copolymer was found to have an influence on the pore size formed. The diblock copolymer formed microspheres ～200 nm in diameter. The thermal properties of all the polymers were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), and the copolymers were found to have good thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1278–1288, 2008