Ion-selectivity of plasticizers in poly(vinyl chloride) membrane electrodes

Electrode membranes were presented which contained only PVC and a plasticizer. The plasticizers studied were tris(2-ethylhexyl)phosphate, 2-nitrophenyl octyl ether and bis(1-butylpentyl)adipate. The response and selectivity of these ligand-free PVC electrodes towards alkali and alkaline earth cations are reported.     

Ionic liquids: New generation stable plasticizers for poly(vinyl chloride)

Room temperature ionic liquids (ILs), based on ammonium, imidazolium and phosphonium cations, were studied as novel plasticizers for poly(vinyl chloride), PVC. All the ILs tested were able to produce flexible PVC. Upon 20 wt% plasticization, some of the ILs lowered the glass transition temperature (T_g) of PVC more than that done by several traditional plasticizers. They showed good thermodynamic compatibility as well. Several ILs showed better leaching and migration resistance than the traditional plasticizers. This was, in particular, a significant observation considering the ongoing controversy regarding the leaching and migration issues of the commonly-used phthalate plasticizers. High temperature and ultraviolet (UV) ray stability of IL-plasticized PVC samples were also studied.     

Determination of tacticity in poly(vinyl chloride) by infrared spectroscopy

From the temperature dependence of infrared spectra of poly(vinyl chloride) samples prepared by different methods, the intensity of the band at 690 cm.¹ (proportional to the number of isotactic diads in the sample), as well as that of the tacticity-independent C? H stretching band, was found to be independent of the crystallinity of the sample. These lines were therefore applied for the tacticity determination in poly(vinyl chloride), measured in the form of KBr pellets. The numerical tacticity value was obtained from the known values of absorbance coefficients of SCH and SHH type C? Cl stretching bands in solution, and from the shape of the spectrum.     

Determination of tin in poly(vinyl chloride) by atomic-absorption spectroscopy

A simple procedure is described for the determination of tin in PVC by atomic-absorption spectroscopy with an air-hydrogen flame, after wet digestion of the sample with sulphuric acid and hydrogen peroxide.     

Degradation of poly(vinyl chloride) plasticized with non-phthalate plasticizers under sterilization conditions

Plasticized PVC formulations have traditionally been used in the production of medical devices, such as tubes and bags for plasma or blood because of their good performance in mechanical and thermal properties as well as their low cost. Clinical practice, in particular re-use after sterilization, can damage and promote degradation of these materials with the risk of release of polymer additives into physiological fluids and consequently risks to patient's health. Formulations with commercial plasticizers, alternative to traditional phthalates (citrate and carboxylate compounds) have been proposed in this work and their behaviour after repeated sterilization has been evaluated. Structural, mechanical, thermal and surface properties have been tested and no significant degradation was observed. No apparent risk of massive damage to plasticized PVC could be considered after repeated sterilization.     

Designing anti-migration furan-based plasticizers and their plasticization properties in poly (vinyl chloride) blends

The use of bio-based plasticizers with low toxicity and good compatibility with polyvinyl chloride (PVC) has attracted more attention in the recent years. With bio-based 2, 5-furandicarboxylic acid (FDCA) and butyl oligo-glycol ethers as raw materials, three liquid furan-based plasticizers of di(butyl glycol) furan-2,5-dicarboxylate, di(butyldiglycol) furan-2,5-dicarboxylate and di(butyltriglycol) furan-2,5-dicarboxylate were synthesized by direct esterification. The chemical structure of three plasticizers was characterized with FTIR, ¹H NMR and ¹³C NMR. From DMA measurement, the glass transition temperature (T_g) of the plasticized PVC was decreased gradually when furan-based plasticizers were added to PVC formulation from 30 up to 50 phr. Due to lots of ether bonds in furan-based plasticizers, they expressed over two-fold lower migration in organic solvent compared with the traditional plasticizer diethylhexyl phthalate (DEHP). Through the characterization of elongation at break, hardness and thermal stability, furan-based plasticizers presented the same plasticization properties as DEHP, and had potential industrial application prospects.     

Effects of plasticizers on novel electromechanical actuations with different poly(vinyl chloride) gels

Four different plasticizers were applied to make different poly(vinyl chloride) (PVC) gels, poly(vinyl chloride)‐bis(2‐ethylhexyl)phthalate (PVC‐DOP), poly(vinyl chloride)‐di‐n‐butylphthalate, poly(vinyl chloride)‐bis(2‐ethylhexyl)adipate, and poly(vinyl chloride)‐tris(2‐ethylhexyl)trimellitate. In our previous work, we reported that PVC‐DOP gel exhibits novel and reversible deformations of creeping and jointlike bending induced by direct current electric fields. In this article, we scrutinize the effects of plasticizers on electromechanical actuations, that is, reversible creeping and bending actuation with four of the different aforementioned gels. We measured the relative creeping distance, creeping area, creeping velocity, current observed, and bending angle as a function of applied electric fields for different PVC gels and found significant differences among them. To explain these variations, we compared the utility of plasticizers on the basis of the properties of different PVC gels, such as plasticizer‐retention ability, bending modulus, elongation at break, and the dielectric constant. The mentioned properties of the PVC gels played vital roles on their electromechanical actuations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2119–2127, 2003     

Discrimination of poly(vinyl chloride) samples with different plasticizers and prediction of plasticizer contents in poly(vinyl chloride) using near-infrared spectroscopy and neural-network analysis.

In the recycling of poly(vinyl chloride) (PVC), it is required to discriminate every plasticizer for quality control. For this purpose, the near-infrared spectra were measured for 41 kinds of PVC samples with different plasticizers (DINP, DOP, DOA, TOTM and Polyester) and different plasticizer contents (0-49%). A neural-network analysis was applied to the near-infrared spectra pretreated by second-derivative processing. They were discriminated from one another. The neural-network analysis also allowed us to propose a calibration model which predicts the contents of plasticizers in PVC. The correlation coefficient (R) and the root-mean-square error of prediction (RMSEP) for the DINP calibration model were found to be 0.999 and 0.41 wt%, respectively. In comparison, a partial least-squares regression analysis was carried out. The R and RMSEP of the DINP calibration model were calculated to be 0.993 and 1.27 wt%, respectively. It is found that a near-infrared spectra measurement combined with a neural-network analysis is useful for plastic recycling.     

Diffusion of additives and plasticizers in poly(vinyl chloride)—II: The self-diffusion of the stabilizers dibutyltin dilaurate and dibutyltin bismonobutylmaleate in plasticized poly(vinyl chloride)

The self-diffusion coefficient, D, of dibutyltin dilaurate and dibutyltin bismonobutylmaleate have been obtained at 35, 45 and 55° in samples of poly(vinyl chloride) plasticized with 34, 60 and 100 phr of di(2-ethylhexyl)phthalate. D at 2 phr of the laurate is 3–5 times larger than for the smaller maleate molecule. In all cases, D increases with increasing plasticizer concentration, an effect interpreted in terms of the free volume theory of diffusion. D for the laurate increases by a factor of about 2.7 when the laurate diffusant concentration is increased from 0 to 4 phr. The activation energies for diffusion, E_D, lie between 50 and 90 kJ mol^?1. They increase with increasing plasticizer concentration but become constant at higher plasticizer concentrations (60–100 phr). It is impossible to correlate all the known data on diffusion in plasticized PVC with an equation of the form log D₀ = C₁ + C₂ E_D/RT     

Analysis of poly(vinyl chloride) additives by supercritical fluid extraction and gas chromatography

The use of supercritical fluid extraction (SFE) is growing, with an expanding range of applications in many different fields as a consequence of its advantages compared with traditional extraction methods. In order to develop an analytical method to determine dibutyl phthalate (DBP) and dioctyl phthalate (DOP) traces (<20 ppm) in flexible poly(vinyl chloride) (PVC) formulations, a maximum efficiency in the extractive process and an adequate separative system are needed to avoid interferences between these two plasticizers and other additives that could be present at high concentrations in flexible PVC formulations. In order to determine the optimum SFE conditions, the extraction time, temperature and pressure were controlled. The separation and quantitation of individual components in the PVC extracts were carried out off-line by using a semicapillary column in gas chromatography (GC). Samples with different DOP content (41.18%, 33.33% and 23.08%) and DBP content (41.18%), as well as samples with both plasticizers (20.59% DOP and 20.59% DBP) were prepared. Some other samples were also prepared to study detection limits for these two PVC additives. Recoveries and reproducibilities were studied in every sample. Finally, this method was compared with Soxhlet liquid extraction. Determination by gravimetric analysis of the total extracted material was found to be particularly suitable for PVC. This study demonstrates the potential of SFE to shorten extraction times with similar or even better extraction efficiencies compared with traditional liquid methods.     

Photo-oxidation of poly(vinyl chloride)

Hydrogen chloride is evolved at an increasing rate in the light-induced oxidation of poly(vinyl chloride) films. These accelerated kinetics were shown to result from an increased absorption of light by the polyenes formed, since the quantum yield of dehydrochlorination (Φ_HCl = 0·015) is independent of the extent of the reaction in the dose range investigated. Determination of the quantum yields of the different processes involved indicate that, for each scission of the polymer backbone, 11 molecules of hydrogen chloride are evolved while three carbonyl groups, two hydroperoxides and 0·4 intermolecular crosslinks appear on the polymer chain. A mechanism that involves β-scissions of the tertiary alkoxy radicals, resulting from non-terminating interactions of α-chloro-peroxy radicals, is suggested to explain the observed increase of the polymer degradation in the presence of oxygen.     

Radiolysis of poly(vinyl chloride)

Allyl free-radical intermediates are detected by ultraviolet absorption at 255 mu in poly(vinyl chloride) irradiated at ?196°C and stored at 25°C. In vacuum at 25°C, allyl radicals are converted into polyenyl free radicals and polyenes. From the nature of allyl radical decay in vacuum, radical chain transfer between polyenyl radicals and poly(vinyl chloride) is inferred. Allyl and polyenyl free radicals are scavenged by oxygen on post-irradiation storage in air.     

Pyrolysis of poly(vinyl chloride)

A pyrolysis–gas chromatography–mass spectrometric technique has been developed to study the thermal degradation of poly(vinyl chlorides) polymerized at different temperatures. Hydrogen chloride and benzene evolution during successive stages of pyrolysis have been quantitatively determined and correlated to the tacticity and molecular weight of the polymer. It was found that lowering the temperature of polymerization and molecular weight depresses benzene evolution and increases char weight but does not affect the HCl yield. It is suggested that the syndiotactic trans microstructure favored at low temperature of polymerization yields polyenes which cannot cyclize to form benzene. As the molecular weight decreases, the increase in number of vinyl chain ends facilitates pyrolytic crosslinking and char formation.     

Photo-oxidation of poly(vinyl chloride)

The photo-oxidation of PVC has been studied over the temperature range 30–150°C. Initiation with ultraviolet (2537A) radiation has been correlated with the presence of minute amounts of ozone. The contribution of atomic oxygen and singlet oxygen (¹Δ_g) molecules to the initiation mechanism is discussed. The β-chloroketones probably formed in the photo-oxidation of PVC, decomposed according to a Norrish type I reaction without loss of chlorine atoms. The gaseous products of the photo-oxidation of PVC at 30°C were carbon dioxide, carbon monoxide, hydrogen, and methane. Hydrogen chloride was obtained only when PVC was heated at high temperatures. When PVC was photo-oxidized and then heated at high temperature, benzene was obtained in addition to hydrogen chloride. The gaseous products from the photo-oxidations of model compounds, such as 4-chloro-2-butanone and 2,4-dichloropentane, were also compared with those from PVC. Hydrogen chloride was detected only after photo-oxidation at temperatures of 25°C or higher. Therefore, it was concluded that hydrogen chloride is mainly a product of thermal decomposition. Since unsaturation was not observed in photo-oxidized PVC films, the cause of discoloration is unclear. When PVC was modified by stabilizers or additives, the oxidative degradation was further complicated by side reactions with the additives.     

Electrical conductivity of poly(vinyl chloride) obtained by photodehydrochlorination from laminated poly(vinyl chloride)/polypyrrole films

Poly(vinyl chloride) (PVC) has been converted to an electrically conductive structure by combined electrochemical and photochemical methods. PVC was cast on a polypyrrole (PPy) film electrode which had been electrochemically prepared. The PVC layer in the laminated PVC/PPy films was first dehydrochlorinated under the illumination of UV light, and the generated polyenes were subsequently doped with I₂ and FeCl₃. The maximum electrical conductivity achieved for such PVC film was 2.51 X 10^?2 and 8.63 10^?2 S cm^?1 after I₂ and FeCl₃ doping, respectively. The temperature dependence of the electrical conductivity showed different behavior in higher and lower temperature ranges. In the former (T > 243 K), the T^?1 law held, and the activation energy and bandgap were estimated as 0.25 and 0.49 eV, respectively. In the latter (T < 243 K), the conductivity mechanism followed the variable range hopping model (T^?1/4 law) in which the radius of the localized state wave function and the density of the localized states at the Fermi level were 1.25 × 10³ Å and 1.03 X 10¹⁵ eV^?1 cm^?3, respectively. © 1995 John Wiley & Sons, Inc.     

Mechanism of the thermal stabilization of poly(vinyl chloride) with metal carboxylates and epoxy plasticizers

The chemical reactions responsible for the retardation of thermal discoloration in poly(vinyl chloride) (PVC) stabilized with a combination of an epoxy plasticizer and a heavy metal soap mixture of Group IIa and IIb metals have been studied. Allylic chlorides (a mixture of 4-chlorohexene-2 and 2-chlorohexene-3) are used as prototypes for the degrading segment of the polymer chain. The results confirm earlier reports that, when a mixture of a covalent and ionic metal soap is used as the stabilizer, the covalent moiety (e.g., Cd and Zn soaps) functions to esterify the allylic site of the degrading PVC model. A synergistic effect displayed by the ionic soap (e.g., Ca or Ba) is caused by a transfer of carboxylate ligands from the ionic soap to the depleting covalent species, which has been largely converted to the corresponding chloride. When an epoxy plasticizer model (cyclohexene oxide) is used in conjunction with the metal soap stabilizer, the preferred reaction is esterification. After a considerable build-up of ester, an α-chloroether, 2-hexenyl 4-(2-chlorocyclohexyl) ether, is formed by the reaction of cyclohexene oxide with the PVC model. This reaction was found to be catalyzed by cadmium chloride. The esterification and etherification reactions provide an explanation for the synergism observed in the stabilization of PVC containing a combination of an epoxy plasticizer with a covalent and an ionic metal soap.     

用DSC研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用示差扫描量热法（DSC）研究了线形多嵌段聚氨酯（PU）与聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）共混相容性，说明了PU／VC、PU／CPVC的相容是由于共混物中形成了新的氢键的缘故．聚酯型聚氨酯与PVC、CPVC的相容性要好子聚酸型聚氨酯，CPVC与PU的相容性又要好于PVC．聚氨酯中硬段的引入不利于PU／PVC、PU／CPVC的相容性．