乳及乳制品中黄曲霉毒素B_1、M_1测定方法改进

建立了一种检测乳及乳制品中黄曲霉毒素B1、M1的高效液相色谱-荧光检测(HPLC-FD)方法。样品经60%乙腈溶液提取,自制固相萃取柱净化,流出液经正己烷、三氟乙酸衍生后荧光检测器检测。考察了填料、柱容量、取样量、提取溶液和流速等对检测的影响,优化了实验条件。结果表明,黄曲霉毒素B1、M1的检测线性范围为0.40~100μg/L,线性系数为0.9991~0.9998,方法检出限为0.050μg/kg。对样品进行0.40、1.0和15μg/L 3种浓度水平的加标回收实验,回收率为53%~105%,相对标准偏差为2.6%~5.1%。该方法操作简单、灵敏度高、准确度好,可用于乳及乳制品中黄曲霉毒素B1、M1的测定。     

反相高效液相色谱法测定乳品及乳制品中的黄曲霉毒素M_1

采用反相高效液相色谱测定乳品及乳制品中黄曲霉毒素M_1(AFM_1)的含量。样品经氯仿提取,过硅胶固相萃取柱净化,用氯仿-丙酮(1+1)混合溶液将黄曲霉毒素M_1从固相萃取柱上洗脱下来。以ZORBAX SB C_(18)色谱柱为分离柱,水和乙腈为流动相梯度淋洗,用荧光检测器检测,外标法定量。黄曲霉毒素M_1在1.0～25μg·L~(-1)质量浓度范围内与其峰面积呈线性关系,检出限(3S/N)为0.05μg·kg~(-1)。应用此法测定了牛奶和乳粉中AFM_1的含量,并测得其平均回收率分别在76.0%～80.0%和76.7%～90.8%之间,相对标准偏差(n=6)均小于7.0%。     

多功能柱净化-柱后光化学衍生-高效液相色谱法同时检测玉米和花生中9种真菌毒素

建立了同时检测玉米和花生中黄曲霉毒素B1、B2、G1、G2、M1、M2、玉米赤霉烯酮、呕吐毒素和展青霉素的多功能柱净化-柱后光化学衍生-高效液相色谱检测方法。样品经乙腈-水(体积比为86∶14)提取,多功能净化柱净化,采用C18柱分离,以甲醇、乙腈和水为流动相进行梯度洗脱,在线光化学衍生,以荧光和二极管阵列测器同时检测。黄曲霉毒素B1、B2、G1、G2、M1、M2、玉米赤霉烯酮、呕吐毒素和展青霉素的检出限分别为0.02μg/kg、0.01μg/kg、0.03μg/kg、0.05μg/kg、0.08μg/kg、0.04μg/kg、0.09μg/kg、0.20mg/kg和0.04 mg/kg,在相应浓度范围内线性相关系数均大于0.999,平均加标回收率为80.0%~101.5%,相对标准偏差在1.3%~5.6%之间。该方法简便快速、灵敏度高、重现性好,可满足玉米、花生中9种黄曲霉毒素的检测。     

在线固相萃取/高效液相色谱-四极杆/静电场轨道阱高分辨质谱检测饲料中的黄曲霉毒素

建立了在线固相萃取/高效液相色谱-四极杆/静电场轨道阱高分辨质谱测定饲料中黄曲霉毒素B1(AFB1)、黄曲霉毒素B2(AFB2)、黄曲霉毒素G1(AFG1)及黄曲霉毒素G2(AFG2)的方法。采用IMMUNOPREPONLINE AFLATOXIN(Part Code:P900)柱为在线固相萃取柱,Diamonsil Plus C18(150 mm×4.6 mm,5μm)柱为分析柱。样品中加入一定量的Na Cl和乙腈-水(80∶20,体积比)溶解,超声提取后,用于后续进样。样品溶液注入在线固相萃取小柱中,通过阀切换技术和HPD共聚焦洗脱模式将保留在SPE柱上的靶标物转移到分析柱中继续进行分离分析,采用外标法定量,采用正离子全扫描模式进行分析。在优化的色谱-质谱条件下,该方法对4种黄曲霉毒素的线性范围为0.5~50.0μg/L,检出限可达0.2μg/kg,定量下限可达0.5μg/kg。在0.5、1.0、5.0μg/kg 3个加标水平下,饲料中4种黄曲霉毒素的回收率为94.6%~114.3%,相对标准偏差不大于8.3%。该方法分析时间短、自动化程度高、检测通量大、检测成本低,可作为饲料中AFB1、AFB2、AFG1、AFG2的快速检测方法。     

光化学柱后衍生–高效液相色谱法测定婴幼儿营养米粉中的黄曲霉毒素B1

建立婴幼儿营养米粉中黄曲霉毒素B1的高效液相色谱荧光检测器测定方法。样品以甲醇–水(体积比70∶30)溶液匀质提取,过黄曲霉毒素B1免疫层析亲和柱净化,经CNW Athena C18色谱柱分离和光化学柱后衍生反应器衍生后,用带有荧光检测器的高效液相色谱仪测定。采用峰面积外标法定量黄曲霉毒素B1含量。黄曲霉毒素B1在0～10μg/L的浓度范围内线性关系良好,相关系数为0.999 8,检出限为0.25μg/kg。在3个添加水平下加标回收率为97.7%～106.9%,测定结果的相对标准偏差为1.7%(n=6)。该方法的灵敏度、准确度、精密度均符合黄曲霉毒素B1的检测技术要求,适用于婴幼儿营养米粉中黄曲霉毒素B1的日常检测。     

高效液相色谱-串联质谱法测定婴幼儿辅助饼干食品中黄曲霉毒素及其同系物

粉碎的婴幼儿辅助饼干食品样品经体积比为89∶10∶1的乙腈-水-乙酸混合液提取,采用净化剂为50mg十八烷基硅烷、30mg N-丙基乙二胺和30mg氨丙基的QuEChERS方法净化,采用高效液相色谱-串联质谱法测定净化液中黄曲霉毒素B1、黄曲霉毒素B_2、黄曲霉毒素G_1、黄曲霉毒素G_2、O-甲基柄曲霉素、柄曲霉素、黄曲霉毒素M1、黄曲霉毒素M_2等8种黄曲霉毒素及其同系物的含量。以AQ-C_(18)HP色谱柱(2.1mm×100mm,3.0μm)为固定相,以不同体积比的含5mmol·L~(-1)乙酸铵的0.1%(体积分数)甲酸溶液和甲醇的混合液为流动相进行梯度洗脱,串联质谱分析中采用电喷雾离子源正离子扫描模式和多反应监测模式。8种黄曲霉毒素及其同系物的质量浓度在一定范围内与其对应的峰面积呈线性关系,检出限(3S/N)为0.05～0.10μg·kg~(-1),测定下限(10S/N)为0.15～0.30μg·kg~(-1)。以空白样品为基体进行加标回收试验,所得回收率为76.3%～95.9%,测定值的相对标准偏差(n=6)为3.1%～11%。     

高效液相色谱法对农产品中黄曲霉毒素的测定研究

采用免疫亲和方法进行样品前处理,用甲醇-乙腈-水三元流动相体系分离黄曲霉毒素,氯化汞溶液在线衍生,荧光检测器检测,建立了新型的高效液相色谱柱后衍生测定黄曲霉毒素(B1、B2、G1、G2、M1)的方法。该方法在13 min内完成测定,线性关系良好,5种黄曲霉毒素的线性相关系数r值均大于0.999。方法成功应用于花生、花生制品、大米、玉米等农产品。对样品进行不同水平的加标回收实验,回收率为83%~100%,相对标准偏差1.51%~4.98%(n=7),B1检出限(S/N=3)和定量下限(S/N=10)分别达到了0.05μg/kg和0.17μg/kg。     

高效液相色谱-串联质谱法测定食用槟榔中4种黄曲霉毒素的含量北大核心CSCD

将粉碎后的槟榔样品2.00g用20mL乙腈提取,以100mg N-丙基乙二胺为净化剂分散固相萃取净化萃取液。取上清液以Thermo Accucore aQ C18色谱柱为固定相,以0.005mol·L-1乙酸铵溶液-乙腈混合液为流动相进行梯度洗脱,采用高效液相色谱-串联质谱法测定其中4种黄曲霉毒素的含量。质谱分析中采用电喷雾离子源和多反应监测模式。结果表明:4种黄曲霉毒素的质量浓度均在0.1～10.0μg·L-1内与其峰面积呈线性关系,测定下限(10S/N)为1μg·kg-1。以食用槟榔样品为基质,按标准加入法进行回收试验,回收率为80.0%～99.2%,测定值的相对标准偏差(n=6)为1.5%～9.3%。     

全自动免疫亲和在线净化/高效液相色谱法快速高通量测定饲料中黄曲霉毒素

建立了全自动免疫亲和在线净化/高效液相色谱快速高通量测定饲料中黄曲霉毒素(Aflatoxins,AFT)的分析方法。饲料样品经乙腈-水(80∶20,体积比)提取,3 g/L Triton X-100水溶液10倍稀释后,用自动进样器注入RIDACREST在线固相萃取系统并流经黄曲霉毒素免疫亲和小柱,以甲醇-水(45∶55,体积比)为流动相,流速为1.0 m L/min,C18色谱柱(150 mm×3.5 mm,5μm)分离,光化学衍生,荧光检测器测定。根据3倍信噪比的峰响应值,确定黄曲霉毒素B1,B2,G1,G2的检出限分别为0.08,0.05,0.18,0.08μg/kg,分别在1~100,0.24~24,0.56~56,0.24~24μg/kg范围内呈线性相关,相关系数(r2)分别为0.999 4,0.999 7,0.999 8和0.999 8;AFT在猪饲料、鸡饲料、宠物饲料和饲料原料4类样品中的加标回收率为72.6%~103%,相对标准偏差为2.5%~4.9%。该方法一次装柱可检测60个样品,液相色谱分析一个样品总的运行时间为15 min,所以1 d可检测70~80个样品,满足饲料中黄曲霉毒素快速高通量准确定量检测的需要。     

超声萃取-免疫亲和柱净化-柱后光化学衍生高效液相色谱法同时测定蜂房药材中4种黄曲霉毒素

建立超声萃取-免疫亲和柱净化-柱后光化学衍生高效液相色谱同时测定蜂房药材中黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2含量的分析方法。样品经粉碎，过孔径为120μm筛后，采用70%甲醇溶液超声处理30 min，经免疫亲和柱净化、高效液相色谱分离、光化学柱后衍生，通过荧光检测器测定4种黄曲霉毒素的含量。黄曲霉毒素B1的线性范围为0.010 4～0.052 0 ng，相关系数为0.999 9；黄曲霉毒素B2的线性范围为0.003 8～0.019 0 ng，相关系数为0.999 8；黄曲霉毒素G1的线性范围为0.010 8～0.054 0 ng，相关系数为0.999 8；黄曲霉毒素G2的线性范围为0.003 8～0.019 0 ng，相关系数为0.999 8。4种黄曲霉毒素检出限分别为0.42、0.15、0.43、0.15μg/kg，测定结果的相对标准偏差不大于2.5%(n=6)，样品加标回收率为92.9%～96.9%。该方法操作简便，灵敏度高，可用于蜂房中黄曲霉毒素含量的测定。     

Direct Quantitation of Phytocannabinoids by One-Dimensional 1H qNMR and Two-Dimensional 1H-1H COSY qNMR in Complex Natural Mixtures

The widespread use of phytocannabinoids or cannabis extracts as ingredients in numerous types of products, in combination with the legal restrictions on THC content, has created a need for the development of new, rapid, and universal analytical methods for their quantitation that ideally could be applied without separation and standards. Based on previously described qNMR studies, we developed an expanded ¹H qNMR method and a novel 2D-COSY qNMR method for the rapid quantitation of ten major phytocannabinoids in cannabis plant extracts and cannabis-based products. The ¹H qNMR method was successfully developed for the quantitation of cannabidiol (CBD), cannabidiolic acid (CBDA), cannabinol (CBN), cannabichromene (CBC), cannabichromenic acid (CBCA), cannabigerol (CBG), cannabigerolic acid (CBGA), Δ9-tetrahydrocannabinol (Δ9-THC), Δ9-tetrahydrocannabinolic acid (Δ9-THCA), Δ8-tetrahydrocannabinol (Δ8-THC), cannabielsoin (CBE), and cannabidivarin (CBDV). Moreover, cannabidivarinic acid (CBDVA) and Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA) can be distinguished from CBDA and Δ9-THCA respectively, while cannabigerovarin (CBGV) and Δ8-tetrahydrocannabivarin (Δ8-THCV) present the same ¹H-spectra as CBG and Δ8-THC, respectively. The COSY qNMR method was applied for the quantitation of CBD, CBDA, CBN, CBG/CBGA, and THC/THCA. The two methods were applied for the analysis of hemp plants; cannabis extracts; edible cannabis medium-chain triglycerides (MCT); and hemp seed oils and cosmetic products with cannabinoids. The ¹H-NMR method does not require the use of reference compounds, and it requires only a short time for analysis. However, complex extracts in ¹H-NMR may have a lot of signals, and quantitation with this method is often hampered by peak overlap, with 2D NMR providing a solution to this obstacle. The most important advantage of the COSY NMR quantitation method was the determination of the legality of cannabis plants, extracts, and edible oils based on their THC/THCA content, particularly in the cases of some samples for which the determination of THC/THCA content by ¹H qNMR was not feasible.     

锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2在不同电解液中的性能研究

应用低热固相合成法制备锂离子电池正极材料L iCo1/3N i1/3Mn1/3O2.研究该材料的结构与形貌,并比较它在商品L iPF6盐和在实验室合成的L iBOB(L iB(C2O4)2)盐电解液中的电化学性能.在L iPF6/EC+DMC+DEC电解液中,该材料表现出优良的电化学性能,其于0.5C、1C、1.5C、2C、3C放电倍率的初始比容量依次为167、163、163、157、147mAh/g,电池的循环性能也较好,说明低热固相合成的材料的有较好的高倍率性能.在L iBOB/EC+DEC+DE电解液中,0.5C倍率下比容量为160 mAh/g,较之L iPF6盐电解液的相差不大,但在高倍率下的比容量有所下降.     

Synthesis of 1-substituted 2,6,7-trioxa-4-phospha-1-borabicyclo[2.2.2]octan-1-uide

1-Substituted 2,6,7-trioxa-4-phospha-1-borabicyclo[2.2.2]octan-1-uides were obtained in 31–71% yields by the reaction of tetrakis(hydroxymethyl)phosphonium sulfate with alkyl- or arylboronic acids in the presence of tetrabutylammonium hydroxide.     

Polymerization of 1-octene and determination of markhouwink constants of poly(1-octene)

The polymerization of 1-octene initiated by methylalumoxane（MAO）-activated Ni（Ⅱ）-based-α-diimine complexes[（2,6-i-Pr）₂C₆H₃-DAB（An）]NiBr₂ was investigated.Using this catalyst,poly（1-octene）s with molecular weight between 100×10³ and 400×10³ and polydispersity（M_w/M_n） between 1.3 and 1.5 were synthesized successfully by varying reaction time at room temperature.The poly（1-octene）s were amorphous polymers and could be well soluble in tetrahydrofuran（THF）.After fractional precipitation,poly（1-octene）s with narrow molecular weight distributions（M_w/M_n≤1.12） were obtained.Their weight-average molecular weights were measured by gel permeation chromatography（GPC） in conjunction with online model BI-MwA multiangle laser light scattering（MALLS）,and their intrinsic viscosities were measured by Maron’s single-point method.The k and a values in Mark-Houwink equation[η]= KM^αin THF at 40℃were 0.089 mL/g and 0.61 respectively.     

锂离子电池正极材料LixNi1/3Mn1/3Co1/3O2的合成及电化学性能研究

应用以氢氧化物共沉淀为前驱体的高温固相烧结法合成L iN i1/3Mn1/3Co1/3O2正极材料,研究了沉淀温度及烧结过程锂盐投入量对该材料的结构和电化学性能的影响.结果表明,以室温(~20℃)下合成的氢氧化物为前驱体制备的L iN i1/3Mn1/3Co1/3O2具有较好的电化学性能.高温固相烧结会导致部分L iOH损失,因而在合成过程中需加入过量的氢氧化锂,实验表明L i1.08N i1/3Mn1/3Co1/3O2材料的电化学性能最优.     

A FACILE SYNTHESIS OF DIETHYL 1- ISOTHIOCYANO)ALKYLPHOSPHONATES[1]

Abstract

Novel, diethyl 1-(isothiocyano)alkylphosphonates 3 have been efficiently synthesized via a one-pot reaction of diethyl 1-azidoalkylphosphonates 1 with triphenylphosphine, followed by in situ transformation of thus formed phosphazenes 2 with carbon disulfide. Application of the title compounds in the synthesis of diethyl (N-phenylthioureido)- and (benzothiazol-2-ylamino)methylphosphonates was also described.     

Preparation of 1-amino-4-methylpiperazine

The selectivity of the formation of N-di(2-chloroethyl)methylamine in reactions with various chlorinating agents has been investigated and the optimum chlorinating agent has been found. 1-Amino-4-methylpiperazine has been obtained for the first time by the cyclization of N-di(2-chloroethyl)methylamine with aqueous hydrazine. A possible mechanism has been proposed for the cyclization reaction.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 12, pp. 1794–1797, December, 2004.     

GAS PERMEABILITY OF COPOLY(1-TRIMETHYL-SILYL-1-PROPYNE-PENTAMETHYL-DISILYL-1-PROPYNE) MEMBRANE

The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.     

1-(2-Quinoxalyl)-, 1-[3,5-Di(trifluoromethyl)phenyl]-, 1-(2-Carboxyphenyl)-, and 1-Ethoxycarbonyl-4-oxo-4,5,6,7-tetrahydroindazoles

The corresponding 1-(2-quinoxalyl)-, 1-[3,5-di(trifluoromethyl)phenyl]-, and 1-ethoxycarbonyl-3-methyl-4-oxo-4,5,6,7-tetrahydroindazoles have been obtained from reactions of 2-acetyl-1,3-cyclohexanedione, its 5,5-dimethyl and 5-(2-furyl) derivatives, with 2-hydrazinoquinoxaline, 3,5-di(trifluoromethyl)phenylhydrazine, and ethoxycarbonylhydrazine. On interaction with ethoxycarbonylhydrazine the intermediate 2-[1-(-ethoxycarbonyl)hydrazino]ethylidene-1,3-cyclohexanediones were also isolated. From the potassium salt of 2-formyldimedone and 2-carboxyphenylhydrazine hydrochloride, 2-(2-carboxyphenyl)hydrazinomethylene-5,5-dimethyl-1,3-cyclohexanedione was obtained, the cyclization of which in ethanol in the presence of HCl led to 1-(2-carboxyphenyl)- and 1-(2-ethoxycarbonylphenyl)-6,6-dimethyl-4-oxo-4,5,6,7-tetrahydroindazole.