基于Labview的芯片PCR PID温控系统研究

温度控制是决定聚合酶链反应(PCR)扩增成败的关键因素之一。与常规PCR相比,芯片PCR具有样品和试剂用量少、加热体积更小、加热效率高、热循环时间短等优点,而反应体积缩小同时对温度控制精度和速度提出了更高的要求。本文介绍了一种基于Labview的微流控PCR芯片温度控制系统的设计与制作,并成功对80bp的核酸适配体片段进行扩增。     

微流控PCR芯片的研究进展

基因是人类的遗传密码,人类个体之间只有万分之一的基因不相同,却导致了人与人之间丰富的差异.了解这种差异对于科学研究具有巨大的应用价值.PCR是基因研究中常用的手段之一,但传统PCR仪存在反应时间长、能量消耗大、不便于集成与携带等缺陷,微流控技术与PCR结合可以有效缩小反应体系,提高反应效率,且易于集成化与微型化.本文按照微流控PCR芯片的结构分类,详细介绍了微池型、连续流动型PCR芯片,以及电泳、荧光、电化学和DNA杂交阵列等检测方法,并在最后进行了总结与展望.     

连续流动式PCR芯片相关技术研究进展

微电子机械系统(microeletromechanical system,MEMS)技术的兴起及其在生物化学领域的广泛应用,推动了聚合酶链式反应(polymerase chain reaction,PCR)热循环装置越来越微型化,各种PCR微芯片／装置被开发。本文主要介绍了基于MEMS技术的连续流动式PCR(continuous—flow PCR)芯片／微装置的相关技术,包括基底材料的选择、通道表面钝化技术、微细加工技术、封接技术以及系统检测技术等,最后简单介绍目前实验室的研究工作。     

液滴微流控系统在数字聚合酶链式反应中的应用研究进展

数字聚合酶链式反应( PCR)技术近年来发展迅速。与以实时荧光定量PCR为代表的传统PCR技术相比,数字PCR技术显著提高了定量分析的精确度和灵敏度。数字PCR的快速发展与近年来微流控技术在数字PCR技术中的广泛应用有着密切的联系。早期的研究和商业化产品使用的是大规模集成流路微流控芯片,加工过程复杂且价格高昂。近年来,液滴微流控芯片被应用到数字PCR技术中,它可以在短时间内产生102~107个微液滴,每一个微液滴都是最多只含有一个目的基因片段的PCR反应器。 PCR扩增后,通过对单个微液滴的观察计数,就可以获得绝对定量的分析数据。本文综述了不同种类的液滴微流控系统在数字PCR技术中的应用,以及液滴数字PCR微流控芯片在生物、医药、环境等领域的应用。     

激光技术在聚合酶链式反应微流控芯片中的应用

评述了激光技术在聚合酶链式反应(polymerase chain reaction,PCR)微流控芯片领域中的应用进展,包括激光技术在PCR微流控芯片微加工、微流体物理参数测量、温度循环控制以及芯片上在线产物检测(包括荧光实时定量/终点和毛细管电泳检测)中的应用。最后,展望了激光技术在未来基于PCR的微全分析系统(micro-total analysis system,μTAS)中的新应用。     

基于BioMEMS技术的DNA固相萃取芯片的制备

基于BioMEMS技术,制备一种新型的Si-PDMS-玻璃结构的DNA固相萃取微流控芯片。在硅基片上制备4种固相载体,分析不同载体的性质和制备特点,优选多孔氧化硅作为萃取DNA的固相载体。对比研究芯片的封装工艺,优选压制法制备PDMS-玻璃盖片,采用粘接技术封装芯片。芯片成功提取老鼠全血中的基因组DNA,提取效率为23.5×10-9g/μL全血,并成功进行PCR反应,达到试剂盒水平。固相萃取微流控芯片具有与其他样品处理芯片、PCR芯片和电泳芯片相集成的潜力,可实现对复杂生物样品的检测和分析。     

流动型微流控PCR扩增芯片的研究

组装了由注射泵进样系统、微流控芯片和三温区加热器组成的流动型PCR扩增系统,该系统具有扩增速度快、交叉污染小、芯片可重复使用和操作方便等特点.优化了芯片厚度、隔热材料和流速等影响PCR扩增的因素.在4.9min内经24个循环成功地扩增了浓度为1ng/100μL的λ-DNA(500bp).     

基于微流控芯片的72重单核苷酸多态性族群推断系统的构建

建立了常染色体单核苷酸多态性（SNPs）复合检测芯片体系,用于未知个体的族群来源推断。基于前期筛选的74-SNPs组合,采用竞争性等位基因特异性聚合酶链式反应（PCR）的原理构建SNPs的扩增体系,在微流控芯片的每个反应孔内完成一个SNP的检测,通过高通量PCR微流控芯片实现了其中72个SNPs的同步检测。芯片的扩增由平板PCR仪完成,反应孔的荧光信号通过激光共聚焦扫描仪检测,最终通过提取的荧光值进行结果分析。使用该芯片检测获得52份样本的SNPs分型,分型结果的准确率为100%。以57个人群的3628个样本为参考人群数据库,进行20份样本的族群来源推断,推断结果与样本的实际来源一致。本研究建立的常染色体72个SNPs微流控芯片体系可以有效地进行SNP多态性分析检测,基于参考数据库,20份检测样本族群推断的准确性为100%。     

一种可绝对定量核酸的数字PCR微流控芯片

构建了一种新型的可进行核酸单分子扩增和核酸绝对定量的数字聚合酶链式反应(数字PCR)微流控芯片. 应用多层软光刻技术, 以聚二甲基硅氧烷(PDMS)作为芯片材料, 盖玻片作为基底制作了具有3层结构以及微阀控制功能的微流控芯片. 芯片的大小与载玻片相当, 可同时检测4个样品, 每个样品通入芯片后平均分配到640个反应小室, 每个小室的体积为6 nL. 以从肺癌细胞A549中提取的18sRNA为样品检测了该芯片的可行性. 将样品稀释数倍后通入芯片, 核酸分子随机分布在640个小室中并扩增. 核酸分子在芯片中的分布符合泊松分布原理, 当样品中待测核酸分子平均拷贝数低于0.5个/小室时, 则每个反应小室包含0个或1个分子. 经过PCR扩增后, 有模板分子的小室检测结果为阳性反应, 而无模板分子的小室为阴性反应, 最后通过计数阳性反应室的个数, 可绝对定量原始待测样品中的目标DNA分子拷贝数. 实验结果表明, 该数字 PCR芯片可实现DNA单分子反应和核酸绝对定量, 具有成本低、 灵敏度高、 节省时间和试剂以及操作简单等优点, 为数字PCR方法在普通实验室的应用提供了一种新途径, 可用于癌症及感染性疾病的早期诊断、 单细胞分析、 产前诊断以及各种细菌病毒的核酸检验等研究.     

芯片毛细管电泳用于人乳头瘤病毒分析的研究进展

人乳头瘤病毒（human papillomavirus,HPV）是一种常见的球形DNA病毒,目前已报道其可以导致6种类型的癌症发生,因此HPV病毒检测方法的研究引起了人们的重视。芯片毛细管电泳（MCE）,作为一种芯片实验设备,结合各种信号放大技术为HPV分型检测提供了简单、快速、高灵敏度和易便携化的检测方法。该文综述了MCE在常规HPV分型检测中的最新研究进展,主要分为MCE技术和MCE结合核酸扩增技术两个部分。综述的第一部分介绍了MCE系统、MCE芯片结构设计和电泳分离方法。典型的MCE系统包含了高压电源、分离芯片、电解液池、进样系统、检测系统等。该文还介绍了近年来应用最广泛的4种芯片通道,包括分离直通道、T型通道、蛇形通道以及双通道,并分别对它们的优缺点进行了比较。第二部分主要介绍芯片电泳在HPV检测中的应用和发展。由于MCE技术的应用,HPV目标物的分离时间,从以前的几个小时缩短到几分钟,极大地提高了分离速度。重点介绍了各种核酸扩增技术结合MCE检测HPV的方法。对聚合酶链式反应（PCR）和MCE结合用于HPV的检测技术、环介导等温扩增（LAMP）技术的HPV检测方法、基于PCR结合限制性片段长度多态性（RFLP）技术用于HPV分型的DNA检测、基于核酸序列扩增（NASBA）技术检测HPV mRNA、巢式PCR等进行了比较分析。其次,对HPV其他检测方法进行了总结,其中包括PCR结合傅里叶变换红外光谱法（FT-IR）、纳米技术、DNA探针结合电化学方法、亚铜粒子氧化还原锌掺杂的二硫化钼量子点结合T7外切酶电化学发光法和基于CRISPR/Cas12a的环介导等温扩增法。在这些非MCE方法中,电化学传感法,如阻抗法、脉冲伏安法和流动生物传感器,由于背景信号低、时间控制能力强,是一种比较理想的方法。最后,虽然近年来MCE技术得到了发展,所开发的设备得到了应用,但目前在MCE技术、方法和应用方面仍然存在一些挑战。MCE技术在HPV分型检测应用中面临的第一个挑战是,MCE本身无法对HPV核酸进行信号放大,从而不能在HPV的高灵敏和高选择性分析中得到很好的应用。第二个挑战是,虽然有一些研究者已经成功地将PCR和MCE集成在一个芯片上,但该技术的广泛应用仍面临困难,目前仍然没有真正集成的PCR-MCE芯片用于HPV检测。第三个挑战是目前MCE技术无法实现小型化、自动化器件的制造。最后,文章就MCE在HPV分型检测中开发更自动化、更快速以及更稳定可靠的检测技术提出了一些观点和见解,希望能对感兴趣的读者提供一些启发。     

Microchip PCR

Miniaturization of genetic tests has become an important goal. This review surveys the current progress towards the miniaturization of tests based on the polymerase chain reaction (PCR). It examines the different types of PCR microchip designs, fabrication methods,and the components of a microchip PCR device. It also discusses the problems attributable to surface chemistry of microchip components (inhibition of PCR), and the static and dynamic surface passivation strategies developed for the solution of these difficulties     

Developments toward a complete micro-total analysis system for Duchenne muscular dystrophy diagnosis

The diagnosis of Duchenne muscular dystrophy (DMD) has historically utilized either PCR or requires Southern blot analysis, a southern blot analysis, however, is not amenable to incorporation in a microdevice format. A PCR amplification-based method has been developed, and we have previously coupled this amplification with microchip separation of the PCR fragments for DMD diagnosis. Diagnoses of affected patients were performed by comparing exon concentrations to those of control samples amplified at the same time. To accurately identify mutations in patient samples, this work established normal ranges for the concentration of each amplified exon fragment using control samples amplified over successive days. Our studies show that the number of cycles used in the amplification process affects this range. Affected patient samples were analyzed using these normal ranges and the mutations detected by Southern blot analysis were also diagnosed using the microchip separation method.

Employing the microchip separation method decreases the time required for the analysis, but the time required for DNA purification and PCR amplification must also be decreased for faster total analysis of patient samples. Development of microchip methods for these processing steps is one approach for reducing the individual times, while also providing the possibility of integrating these steps in a single device. Here we report on the microchip extraction of genomic DNA from whole blood using a novel sol–gel matrix that is easily formed in microdevices. IR-mediated PCR amplification of a β-globin fragment from genomic DNA followed by electrophoretic analysis on a single integrated microdevice is presented for the first time. Work towards the development of a micro-total analysis device for DMD diagnosis, through integration of all processing steps on a single device, is also discussed.     

Sample loading and retrieval by centrifugation in a closed-loop PCR microchip

We report on a novel concept of sample loading for microfluidic devices using a benchtop centrifuge and a magnetically actuated circular closed-loop PCR microchip as a model system. The PCR mixture and the ferrofluid were loaded into a specially designed microchip. The microchip was then placed in an off-the-shelf 50-mL tube and centrifuged. The strong centrifugal force drives the PCR mixture and the ferrofluid into the microchannels of the microchip, and simultaneously expels any trapped microbubbles. PCR was successfully carried out on single and parallel closed-loop PCR microchips. The addition of a few off-chip handling steps allows great simplification of the device design. This new loading concept may be useful for designing robust and low-cost lab-on-a-chip devices because benchtop centrifuges are quite common in most laboratories.

Practical integration of polymerase chain reaction amplification and electrophoretic analysis in microfluidic devices for genetic analysis

An integrated system of a silicon-based microfabricated polymerase chain reaction (microPCR) chamber and microfabricated electrophoretic glass chips have been developed. The PCR chamber was made of silicon and had aluminum heaters and temperature sensors integrated on the glass anodically bonded cover. Temperature uniformity in the reaction chamber was +/-0.3 degrees C using an improved novel "joint-heating" scheme. Thermal cycling was digitally controlled with a temperature accuracy of +/- 0.2 degrees C. Small operating volumes together with high thermal conductivity of silicon made the device well suited to rapid cycling; 16 s/cycle were demonstrated. For analysis of the PCR products, the chamber output was transferred to the glass microchip by pressure. Analysis time of PCR amplified genomic DNA was obtained in the microchip in less than 180 s. The analysis procedure employed was reproducible, simple and practical by using viscous sieving solutions of hydroxypropylmethylcellulose and dynamically coated microchip channels with poly(vinylpyrrolidone). DNA fragments that differ in size by 18 base pairs (bp) were resolved. Analysis of genomic male and female amplified DNA by microPCR was achieved in microchip, and application of the integrated microPCR-microchip for the identification of bird sex was tested. Genomic DNA samples from several bird species such as pigeon and chicken were analyzed. Hence, the system could be used as well to determine the sex of avian species.     

A Rotary Polydimethylsiloxane‐Based Device for Polymerase Chain Reaction

Abstract

A novel rotary channel polymerase chain reaction (PCR) microchip with polydimethylsiloxane (PDMS) is developed in our laboratory. The chip circular platinum thin‐film heaters and thermometers. Compared with other continuous‐flow PCR chips, the novel rotary channel and the circular heating arrangements in this chip make the loaded reagent mixture pass through three constant‐temperature zones in a very direct sequence, which avoids a melted sample's subjection to the extension temperature before reaching the annealing zone and improves the PCR yield effectively. Several experiments are performed to verify the ability of the device. The results show that the device achieves 25 cycles in 35 min with flow rate 3 µl/min compared to about 45 min in a standard batch PCR system.     

Rapid amplification of genetically modified organisms using a circular ferrofluid-driven PCR microchip

The use of genetically modified organisms (GMOs) as food and in food products is becoming more and more widespread. Polymerase chain reaction (PCR) technology is extensively used for the detection of GMOs in food products in order to verify compliance with labeling requirements. In this paper, we present a novel close-loop ferrofluid-driven PCR microchip for rapid amplification of GMOs. The microchip was fabricated in polymethyl methacrylate by CO₂ laser ablation and was integrated with three temperature zones. PCR solution was contained in a circular closed microchannel and was driven by magnetic force generated by an external magnet through a small oil-based ferrofluid plug. Successful amplification of genetically modified soya and maize were achieved in less than 13 min. This PCR microchip combines advantages of cycling flexibility and quick temperature transitions associated with two existing microchip PCR techniques, and it provides a cost saving and less time-consuming way to conduct preliminary screening of GMOs. Figure Schematic of the circular ferrofluid-driven PCR microchip     

Frontal analysis on a microchip

Conventional microchip applications involving capillary electrophoresis (CE) typically inject a sample along one channel and use an intersection of two channels to define the sample plug--the portion of sample to be analysed along a second channel. In contrast to this method of zone separation, frontal analysis proceeds by injecting sample continuously into a single channel or column. Frontal analysis is more common in macroscopic procedures but there are benefits in sensitivity and device density to its application to electrophoresis on microchips. This work compares conventional microchip zone analysis with frontal analysis in the separation of PCR products. Although we detect on the order of 5000 fluorophores with a compact instrument using the zone separation CE method, we found a several-fold increase in the effective signal-to-noise ratio by using a frontal analysis method. By removing the need for additional channels and reservoirs the frontal method would allow device densities to be significantly increased, potentially improving the cost-effectiveness of microchip analyses in applications such as medical diagnostics.     

Microchip micellar electrokinetic chromatography separation of alkaloids with UV-absorbance spectral detection

A microchip device is demonstrated for the electrophoretic separation and UV-absorbance spectral detection of four toxic alkaloids: colchicine, aconitine, strychnine, and nicotine. A fused-silica (quartz) microchip containing a simple cross geometry is utilized to perform the separations, and a miniature, fiber-optic CCD spectrometer is coupled to the microchip for detection. Sensitive UV-absorbance detection is achieved via the application of online preconcentration techniques in combination with the quartz microchip substrate which contains an etched bubble-cell for increased pathlength. The miniature CCD spectrometer is configured to detect light between 190 and 645 nm and LabView programming written in-house enables absorbance spectra as well as separations to be monitored from 210 to 400 nm. Consequently, the configuration of this microchip device facilitates qualitative and quantitative separations via simultaneous spatial and spectral resolution of solutes. UV-absorbance limits of quantification for colchicine, 20 microM (8 mg/L); strychnine, 50 microM (17 mg/L); aconitine, 50 microM (32 mg/L); and nicotine, 100 microM (16 mg/L) are demonstrated on the microchip. With the exception of aconitine, these concentrations are > or =20-times more sensitive than lethal dose monitoring requirements. Finally, this device is demonstrated to successfully detect each toxin in water, skim milk, and apple juice samples spiked at sublethal dose concentrations after a simple, SPE procedure.     

Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane-glass hybrid microchip

We report on the development of a hybrid polydimethylsiloxane (PDMS)-glass microchip for genetic analysis by functional integration of polymerase chain reaction (PCR) and capillary gel electrophoresis (CGE), and on related temperature control systems for PCR on a PDMS-glass hybrid microchip. The microchip was produced by molding PDMS against a microfabricated master with comparatively simple and inexpensive methods. PCR was successfully carried out on the PDMS-glass hybrid microchip with 500 bp target of lambdaDNA and the amplified gene was subsequently analyzed by CGE on the same PDMS-glass microchip. The chip could be considered as an inexpensive single-use apparatus compared to glass or silicon-made microchips for the same purpose.     

Towards a portable microchip system with integrated thermal control and polymer waveguides for real-time PCR

A novel real-time PCR microchip platform with integrated thermal system and polymer waveguides has been developed. The integrated polymer optical system for real-time monitoring of PCR was fabricated in the same SU-8 layer as the PCR chamber, without additional masking steps. Two suitable DNA binding dyes, SYTOX Orange and TO-PRO-3, were selected and tested for the real-time PCR processes. As a model, cadF gene of Campylobacter jejuni has been amplified on the microchip. Using the integrated optical system of the real-time PCR microchip, the measured cycle threshold values of the real-time PCR performed with a dilution series of C. jejuni DNA template (2 to 200 pg/microL) could be quantitatively detected and compared with a conventional post-PCR analysis (DNA gel electrophoresis). The presented approach provided reliable real-time quantitative information of the PCR amplification of the targeted gene. With the integrated optical system, the reaction dynamics at any location inside the micro reaction chamber can easily be monitored.