Polyacrylamide Grafted Carboxymethyl Tamarind (CMT-g-PAM): Development and Application of a Novel Polymeric Flocculant

Water is scarce commodity now. Recycling of municipal wastewater, industrial and mineral processing effluents require treatment with the inorganic or organic flocculants. Both synthetic and natural polymers are used as flocculants. Natural polymers are biodegradable and are effective at very large dosages but are very shear stable. The synthetic polymers are highly effective flocculants at very small dosages and have high tailorability, but have poor shear stability. In the authors' laboratory, a novel polymeric flocculant has been developed by grafting polyacrylamide onto the backbone of carboxymethyl tamarind (CMT-g-PAM). Various grades were developed to optimize the best flocculant. The grafted polymers were characterized by various characterization techniques such as intrinsic viscosity measurement, FTIR spectroscopy, ¹³C-NMR spectroscopy, elemental analysis etc. The flocculation studies were carried out using turbidity test as well as settling test. The optimized CMT-g-PAM was then compared with some of the commercial flocculants available in national and international markets in colloidal suspensions and it has been found that our synthesized flocculant surpasses most of the commercial flocculants in performance.     

Polyelectrolyte‐grafted carbon nanotubes: Synthesis,reversible phase‐transition behavior,and tribological properties as lubricant additives

A novel polyelectrolyte‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐PILs) which possesses a hard backbone of MWCNTs and a soft shell of brush‐like poly (ionic liquids) (PILs) has been synthesized via the surface atom transfer radical polymerization (ATRP). Chemical structure and the grafted PILs quantities of MWCNTs‐g‐PILs were determined by FTIR, TGA, and XPS. TEM and FE‐SEM observations indicate that the nanotubes were coated with a PILs layer, exhibiting core‐shell nanostructures with the PILs chains as the brush‐like or hairy shell and the MWCNTs as the hard backbone. Furthermore, the effect of counter‐anions on the solubility of MWCNTs‐g‐PILs was investigated. The results indicate that relative solubility of MWCNTs‐g‐PILs in various solvents could be switched by anion exchange. This tunable solubility results in the formation of the cycle of reversible phase‐transition. Tribological property of MWCNTs‐g‐PILs as additives in base lubricant 1‐methyl‐3‐butylimidaaolium hexafluorophosphate (LP104) was evaluated using an Optimol SRV oscillating friction and wear tester, confirming that MWCNTs‐g‐PILs are the excellent antiwear and friction‐reducing additives, which can amend the tribological properties of base lubricant significantly. This is attributed to the good dispersibility and core‐shell structure of MWCNTs‐g‐PILs. These results reported in this work may open primarily toward constructing a bridge among carbon nanotues (CNTs), ILs, and lubricant additives and secondarily to prove that CNTs (modified CNTs) as lubricant additives are promising candidates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7225–7237, 2008     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

Dissecting the Vaporization Enthalpies of Ionic Liquids by Exclusively Experimental Methods: Coulomb Interaction,Hydrogen Bonding,and Dispersion Forces

The quantification of hydrogen bonding and dispersion energies from vaporization enthalpies is a great challenge. Dissecting interaction energies is particularly difficult for ionic liquids (ILs), for which the composition of the different types of interactions is known neither for the liquid nor for the gas phase. In this study, we demonstrate the existence of ion pairs in the gas phase and dissect the interaction energies exclusively from measured vaporization enthalpies of different alkylated protic ILs (PILs) and aprotic ILs (AILs) and the molecular analogues of their cations. We demonstrate that the evaporated ion pairs are characterized by H‐bond‐enhanced Coulomb interaction. The overall interaction energy for the ILs in the bulk phase is composed of Coulomb interaction (76 kJ mol^?1), hydrogen bonding (38 kJ mol^?1), and minor dispersion interaction (10 kJ mol^?1). Thus, hydrogen bonding prominently contributes to the overall interaction energy of PILs, which is reflected in the properties of this class of liquids.     

Structure Effects on the Ionicity of Protic Ionic Liquids

We report on the characterisation of 16 protic ionic liquids (PILs) prepared by neutralisation of primary or tertiary amines with a range of simple carboxylic acids, or salicylic acid. The extent of proton transfer was greater for simple primary amine ILs compared to tertiary amines. For the latter case, proton transfer was increased by providing a better solvation environment for the ions through the addition of a hydroxyl group, either on the tertiary amine, or by formation of PIL/molecular solvent mixtures. The library of PILs was characterised by differential scanning calorimetry and a range of transport properties (i. e. viscosity, conductivity and diffusivity) were measured. Using the (fractional) Walden rule, the conductivity and viscosity results were analysed with respect to their deviation from ideal behaviour. The validity of the Walden plot for PILs containing ions of varying sizes was also verified for a number of samples by directly measuring self-diffusion coefficients using pulsed-field gradient spin-echo (PGSE) NMR. Ionicity was found to decrease as the alkyl chain length and degree of branching of both the cations and anions was increased. These results aim to develop a better understanding of the relationship between PIL properties and structure, to help design ILs with optimal properties for applications.     

分散聚合法制备耐盐型两性絮凝剂及絮凝性能

以丙烯酰胺(AM)为主体,同时引入正、负2种电荷基团单体,在盐水介质中采用分散聚合法,成功制备了耐盐型两性絮凝剂（P（AM/AA/DMBAC）,简称AAB系列）。 系统地考察了分散介质、分散剂、单体浓度和链转移剂（次磷酸钠、甲酸钠）用量对两性絮凝剂AAB特性粘数和表观黏度的影响,确定了最佳反应条件为：n(AM)∶n(AA)∶n(DMBAC)=90∶5∶5,w（单体含量）=13%、w（PDAC）=6%(基于单体总质量)、w（硫酸铵）=25%(基于体系质量)、w（引发剂（VA-044））=0.2%(基于单体总质量)、ρ（次磷酸钠）=0.05 g/L、ρ（甲酸钠）=1.0 g/L,反应温度35 ℃,反应时间24 h,并通过絮凝试验评价了该两型絮凝剂的絮凝性能和耐盐性。 结果表明,在最佳反应条件下,两性絮凝剂具有较大的特性粘数（5.2 dL/g）和良好的稳定性;在高盐浓度的模拟污水中,两性絮凝剂具有使用剂量小（30×10-6）,絮团沉降速率快（2.56 s-1）等优点,表现出优异的絮凝能力和良好的耐盐性。     

Experimental nibble for computational chemists: On the construction and CO2 capture by different zeolite imidazole ester framework-8 and ionic

The combination of zeolitic imidazolate framework-8 (ZIF-8) and ionic liquids (ILs) to create porous ionic liquids (PILs) is highly significant for efficient carbon dioxide (CO₂) capture and the advancement of carbon capture, utilization, and storage (CCUS) technologies. To further investigate the CO₂ capture characteristics of different PILs, two different-sized ZIF-8 structures and two functionalized ILs were prepared. Additionally, the enhancement factor of the reaction process was calculated using the dual-film theory and mass transfer coefficient. The results demonstrated that the original [PMIm]Cl had low CO₂ absorption capacity at ambient temperature and pressure, whereas the functionalized ILs had a maximum CO₂ capture capacity of approximately .31 mol/mol, with the 20 wt% concentration of tetraethylene pentamine-2-methylimidazole ([TEP][MIm]) exhibiting the highest CO₂ capture capacity of around 1.93 mol/mol. The synthesized PILs demonstrated a maximum CO₂ capture capacity of approximately 2.22 and 2.16 mol/mol at 20 and 10 wt% ionic concentrations, respectively, with a porous ionic liquid addition of 1.0/100 g. The corresponding enhancement factors were 1.53 and 1.59, respectively. These findings have significant implications for CCUS technology.     

Novel imidazolium‐based poly(ionic liquid)s: preparation,characterization, and absorption of CO2

The development of novel materials for carbon dioxide (CO₂) capture is of great importance in resource utilization and environmental preservation. In this study, imidazolium‐based ionic liquids (ILs) with symmetrical ester and hydroxyl groups were prepared, and their corresponding polymer were synthesized by melt condensation polymerization. The structure and properties of the poly(ionic liquid)s (PILs) were characterized by proton nuclear magnetic resonance, gel permeation chromatograph, differential scanning calorimetry, X‐ray diffraction, and scanning electron microscopy. In addition, the CO₂ sorption behavior of the IL monomers and PILs were studied at a low pressure (648.4 mmHg CO₂) and under a temperature of 25°C using a thermogravimetric analyzer. The CO₂ sorption capacity of 1,3‐bis(2‐hydroxyl ethyl)‐imidazolium hexafluorophosphate ([HHIm]PF₆, 10 mol%) was the highest among all the IL monomers and PILs studied. This capacity is also much higher than those reflected of previously reported ILs. Moreover, the sorption equilibrium of [HHIm]PF₆ was achieved within a short time. Copyright © 2011 John Wiley & Sons, Ltd.     

The increase in diffraction efficiency of an azobenzene side-chain polymer using imidazolium and ammonium ionic liquids

The advancement of the information age has intensified the focus on photosensitive materials for information storage devices. To develop new photosensitive two azobenzene side-chain polymers i.e., poly(E)-3-(4-((4-nitrophenyl)diazenyl)phenoxy)propyl acrylate (polymer-1) and poly(E)-3-(4-((2-methoxy-4-nitrophenyl)diazenyl)phenoxy)propyl acrylate (polymer-2), were developed, and their diffraction efficiency was evaluated. The impact of ionic liquids (ILs) on the diffraction efficiency was evaluated by combining the polymers with imidazolium and ammonium families of ILs such as 1-butyl-3-methylimidazolium bromide [Bmim]Br, 1-ethyl-3-methyl-imidazolium-bromide [Emim]Br (imidazolium ILs), and triethylammonium methanesulfonate [TMEAS] (ammonium IL). The molecular interaction of both azobenzene side-chain polymers with the ILs was evaluated before the diffraction efficiency studies by employing UV–vis, FT-IR, and confocal Raman spectroscopies. The spectroscopic studies revealed the interaction of the polymers with the imidazolium and ammonium ILs. The mean diffraction efficiency of polymers-1 and ?2 were ～0.05 and ～0.022%, respectively. After the addition of the ILs, the diffraction efficiency increased. The highest diffraction efficiency was achieved with the polymer-2 + [Emim]Br system of 3.5% and polymer-2 + TEMS combination of 4.03%. Therefore, although the diffraction efficiency of polymer-1 was higher than that of polymer-2, after adding the ILs, the diffraction efficiency of polymer-2 surpassed that of the polymer-1 + ILs system.     

Theoretical study on ionic liquids based on DBUH+: Molecular engineering and hydrogen bond evaluation

The new generation of the ionic liquids (ILs) based on 1,8-diazobicylo [5,4,0] undec-7-ene (DBU) are applied as the solvent in organic reactions. In this work, by using a theoretical procedure, the most probable interactions between the ion pairs of DBUH⁺ based ILs, including 10 functionalized imidazole anions were investigated. For this purpose, the electrostatic potential surfaces were analyzed to detect the most probable interaction sites of DBUH⁺. On the basis of the obtained results, hydrogen bond formation between the anions and DBUH⁺ is influenced by the electronic effect of the substituted functional groups. This means that electron donating groups, such as phenyl has a stabilizing effect on the ion pairs, while electron-withdrawing groups, such as nitro, induces a destabilizing effect. These behaviors are described based on the interaction energy values (ΔE_int). To investigate the dispersion interaction effects in ILs formation, M06-2X-D3 functional was applied in energy analysis. The solvent reaction field was investigated by the polarizable continuum model in ethanol and chloroform as the solvent. The results showed that ethanol has a greater effect on the interaction energy of the ILs. Finally, to have a comprehensive understanding of the charge transfer effect on the stability of the studied ILs and to characterize the most probable interactions, natural bond orbital and quantum theory of atoms in molecules analyses were applied and the obtained results were analyzed.     

Effect of hydrolysis degree of hydrolyzed polyacrylamide grafted carboxymethyl cellulose on dye removal efficiency

In this present work, a series of hydrolyzed polyacrylamide grafted carboxymethyl cellulose (CMC-g-HPAM) was prepared. The structure and solution properties of CMC-g-HPAM were characterized by FTIR, ¹H-NMR, elemental analysis and zeta potential measurements. The graft copolymers were applied as flocculants to remove methylene blue (MB), a cationic dye, from aqueous solutions. In comparison with its precursors, carboxymethyl cellulose (CMC) and polyacrylamide CMC-g-PAM, CMC-g-HPAM exhibited higher removal efficiencies. Furthermore, the flocculation performance of the copolymers was significantly improved with the increase of the hydrolysis degree, and the MB removal efficiency was more than 90 % when the hydrolysis degree of CMC-g-HPAM was higher than 80 %. More importantly, image analysis in combination with fractal theory demonstrated that the graft copolymers could produce notably denser and larger flocs, which was of great significance in practical water treatment. The improved flocculation performance was ascribed to both charge neutralization and bridging effects.     

Microstructures of Choline Amino Acid based Biocompatible Ionic Liquids

Bio-compatible ionic liquids (Bio-ILs) represent a class of solvents with peculiar properties and exhibit huge potential for their applications in different fields of chemistry. Ever since they were discovered, researchers have used bio-ILs in diverse fields such as biomass dissolution, CO₂ sequestration, and biodegradation of pesticides. This review highlights the ongoing research studies focused on elucidating the microscopic structure of bio-ILs based on cholinium cation ([Ch]⁺) and amino acid ([AA]⁻) anions using the state-of-the-art and classical molecular dynamics (MD) simulations. The microscopic structure associated with these green ILs guides their suitability for specific applications. ILs of this class differ in the side chain of the amino acid anions, and varying the side chain significantly affects the structure of these ILs and thus helps in tuning the efficiency of biomass dissolution. This review demonstrates the central role of the side chain on the morphology of choline amino acid ([Ch][AA]) bio-ILs. The seemingly matured field of bio-ILs and their employment in various applications still holds significant potential, and the insights on their microscopic structure would steer the field of target specific application of these green ILs.     

Design,synthesis, and self‐assembly manipulating of polymerized ionic liquids contained imidazolium based on “Jacketing” effect

A series of novel polymerized ionic liquids (PILs) contained imidazolium, poly (2,5‐bis{[6‐(1‐butyl‐3′‐imidazolium)hexyl] oxy carbonyl}styrene salts) (denoted as P1? X^?, X^??Br^?, BF₄^?, PF₆^? and TFSI^?) were successfully synthesized via radical polymerization. The chemical structures of the monomers and their corresponding PILs were confirmed by ¹H NMR, ¹³C NMR, and Fourier transform infrared spectroscopy. Thermogravimetric analysis results showed that these PILs had excellent thermal stability. The phase transitions and liquid‐crystalline (LC) behaviors of these polymers were investigated by differential scanning calorimetry, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction. The combined experimental results showed that all the PILs could form hexagonal columnar (?H) LC ordered structures because of the strong interaction between the anions and cations in the side groups except for P1? TFSI^?. The conductivities of monomers and PILs were sketchily investigated, and monomers had higher conductivities than those of conprespoding PILs. For comparison, we have synthesized a polymer without counter‐anion, but similar to the chemical structure of P1? X^?, poly (2, 5‐bis{[6‐(4‐butoxy‐4′‐oxy phenyl) hexyl] oxycarbonyl} styrene) (denoted as P2). In this case, phenyl took place of imidazolium of side chain, and LC ordered structure did not form. The comparison between P1? X^? and P2 suggested that ion played an important role in the constructing of LC ordered structure. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

烷基咪唑离子液体对脂肪酶催化酯水解反应活性的影响

考察了1-烷基-3-甲基咪唑类离子液体对柱状假丝酵母脂肪酶(CRL)催化橄榄油水解反应活性的影响,利用电导法确定了磷酸盐缓冲液中Br^-,Cl^-,[BF₄]^-系列咪唑离子液体的临界胶束浓度(CMC)和[PF₆]^-系列咪唑离子液体的溶解度.结果显示,离子液体的阴、阳离子对酶活性的影响规律与离子液体的Kosmotropicity性质无明显关联,但与离子液体在体系中的含量密切相关,在最适离子液体含量时,酶活性达到最高;阳离子[C_nMIM]⁺中的n越大,可促进酶活性的离子液体适宜含量越低;Br^-,[BF₄]^-系列离子液体的浓度超过CMC时则抑制酶活;阴离子对酶活性的最大促进作用顺序为Br^->Cl^->[BF₄]^->[PF₆]^-.离子液体对酶活性的影响随体系pH和温度的不同而改变,在最适离子液体浓度时的最适pH均为7.000.在pH 7.000,30 ^oC以及[C₈MIM]Br离子液体浓度为47.6 mmol/L的最佳条件下,最高相对酶活力和比活力分别达到1734%和54.4 U/mg protein.     

Size Matters! On the Way to Ionic Liquid Systems without Ion Pairing

Several, partly new, ionic liquids (ILs) containing imidazolium and ammonium cations as well as the medium‐sized [NTf₂]^? (0.230 nm³; Tf=CF₃SO₃^?) and the large [Al(hfip)₄]^? (0.581 nm³; hfip=OC(H)(CF₃)₂) anions were synthesized and characterized. Their temperature‐dependent viscosities and conductivities between 25 and 80 °C showed typical Vogel–Fulcher–Tammann (VFT) behavior. Ion‐specific self‐diffusion constants were measured at room temperature by pulsed‐gradient stimulated‐echo (PGSTE) NMR experiments. In general, self‐diffusion constants of both cations and anions in [Al(hfip)₄]^?‐based ILs were higher than in [NTf₂]^?‐based ILs. Ionicities were calculated from self‐diffusion constants and measured bulk conductivities, and showed that [Al(hfip)₄]^?‐based ILs yield higher ionicities than their [NTf₂]^? analogues, the former of which reach values of virtually 100 % in some cases.From these observations it was concluded that [Al(hfip)₄]^?‐based ILs come close to systems without any interactions, and this hypothesis is underlined with a Hirshfeld analysis. Additionally, a robust, modified Marcus theory quantitatively accounted for the differences between the two anions and yielded a minimum of the activation energy for ion movement at an anion diameter of slightly greater than 1 nm, which fits almost perfectly the size of [Al(hfip)₄]^?. Shallow Coulomb potential wells are responsible for the high mobility of ILs with such anions.     

Enhanced Harvesting of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> Using Combined Flocculants

In this study, a novel flocculation strategy for harvesting Chlorella vulgaris with combined flocculants, poly (γ-glutamic acid) (γ-PGA) and calcium oxide (CaO), has been developed. The effect of flocculant dosage, the order of flocculant addition, mixing speed, and growth stage on the harvesting efficiency was evaluated. Results showed that the flocculation using combined flocculants significantly decreases the flocculant dosage and settling time compared with control. It was also found that CaO and γ-PGA influenced microalgal flocculation by changing the zeta potential of cells and pH of microalgal suspension. The most suitable order of flocculant addition was CaO first and then γ-PGA. The optimal mixing speed was 200 rpm for 0.5 min, followed by 50 rpm for another 4.5 min for CaO and γ-PGA with the highest flocculation efficiency of 95 % and a concentration factor of 35.5. The biomass concentration and lipid yield of the culture reusing the flocculated medium were similar to those when a fresh medium was used. Overall, the proposed method requires low energy input, alleviates biomass and water contamination, and reduces utilization of water resources and is feasible for harvesting C. vulgaris for biofuel and other bio-based chemical production.     

How does the type of counterion influence the polymerization rate and thermal properties of tailored choline-based linear- and star-shaped poly(ionic liquid)s PILs?

The synthesis of tailored [2-(methacryloyloxy)ethyl]-trimethylammonium chloride (ChMA/Cl⁻) and bis(trifluoromethanesulfonate) imide (ChMA/NTf₂⁻)-based ionic homopolymers by sustainable activators generated by electron transfer atom transfer radical polymerization (ATRP) method has been demonstrated. Linear and four-arm star-shaped macromolecules were obtained with the use of two synthetic strategies: (a) direct polymerization of ionic monomers with counterions differing in hydrophilicity (prepolymerization) and (2) modification by ion exchange from Cl⁻ to NTf₂⁻ (postpolymerization) using both classical ATRP initiator and pentaerythritol-based initiator. The effect of counterions on the polymerization kinetics and the physicochemical and thermodynamical properties of resulted poly(ionic liquid)s (PILs) has been investigated. Results showed that polymerizations of ChMA/NTf₂⁻ proceeded with higher rate in comparison to ChMA/Cl⁻ one independently on the predetermined topologies (linear and four-arm star-shaped). From thermodynamical point of view, the glass transition temperature T_g increased with molecular weight M_n for linear- and star-shaped PILs for both types of counterion. In addition, star-shaped polymers of comparable M_n to linear ones were characterized by slightly higher T_g values. The resulting polyelectrolytes, after modification via exchange of Cl⁻ anions to NTf₂⁻ ones were characterized by much higher T_g in comparison to those produced by direct polymerization of ionic monomer, indicating the crucial role of postpolymerization modification on thermodynamical properties of PILs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2681–2691     

Biocatalysis and Biomass Conversion in Alternative Reaction Media

In this Minireview, the state of the art in the use of ionic liquids (ILs) and deep eutectic solvents (DESs) as alternative reaction media for biocatalytic processes and biomass conversion is presented. Initial, proof‐of‐concept studies, more than a decade ago, involved first‐generation ILs based on dialkylimidazolium cations and non‐coordinating anions, such as tetrafluoroborate and hexafluorophosphate. More recently, emphasis has switched to more environmentally acceptable second‐generation ILs comprising cations, which are designed to be compatible with enzymes and, in many cases are derived from readily available, renewable resources, such as cholinium salts. Protic ionic liquids (PILs), prepared simply by mixing inexpensive amines and acids, are particularly attractive from both an environmental and economic viewpoint. DESs, prepared by mixing inexpensive salts with, preferably renewable, hydrogen‐bond donors such as glycerol and amino acids, have also proved suitable reaction media for biocatalytic conversions. A broad range of enzymes can be used in ILs, PILs and DESs, for example lipases in biodiesel production. These neoteric solvents are of particular interest, however, as reaction media for biocatalytic conversions of substrates that have limited solubility in common organic solvents, such as carbohydrates, nucleosides, steroids and polysaccharides. This has culminated in the recent focus of attention on their use as (co)solvents in the pretreatment and saccharification of lignocellulose as the initial steps in the conversion of second‐generation renewable biomass into biofuels and chemicals. They can similarly be used as reaction media in subsequent conversions of hexoses and pentoses into platform chemicals.     

Hydrogen-Bonding-Driven Ion-Pair Formation in Protic Ionic Liquid Aqueous Solution

Protic ionic liquids (PILs) in solution especially in water have attracted more and more attention due to their unique properties. The solvation of PILs in water is important to their properties and applications. To explore the solvation of bio-based PILs in water, acidity of 49 [AA]X amino acid ionic liquids (AAILs) consisting of 7 different cations and 7 different anions was studied as a favorable probe. The pK_a values for [AA]X PILs containing same cations were obtained and discussed. The acidity strength of the [AA]X PILs varies with both cation and anion which does not follow the conventional assumption that the acidity for PILs is independent of anions. The acidic discrepancy of [AA]X PILs aqueous solution is probably mediated by the formation of ion pairs according to a revised solvation model of PILs. Quantum-chemistry calculation was employed to unpuzzle anion's different effects on the acid balance of cations where cation-anion hydrogen bonds play an important role. Such difference in acidity allows us to understand the formation of solvated ion pairs. This work provides an insight into the fundamental solvation of PILs from acid perspective and their influence on acidity properties for the first time.     

Analysis of aromatic acids by nonaqueous capillary electrophoresis with ionic‐liquid electrolytes

The separation of six kinds of aromatic acids by CZE with 1‐ethyl‐3‐methylimidazolium chloride (EMIMCl) and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO₄)_, two kinds of ionic liquids (ILs) as background electrolytes, and acetonitrile as solvent were investigated. The six kinds of aromatic acids can be separated under positive voltage with low IL concentration with either of the two ILs and separation with EMIMHSO₄ is better in consideration of peak shapes and separation efficiency. But the migration order is different when the IL is different. Under negative voltage with high IL concentration, the six analytes can be separated with EMIMCl as background electrolytes and the migration order of the analytes is opposite to those with low concentration of EMIMCl as background electrolyte. The separations are based on the combination effects of heteroconjugation between the anions and cations in the ILs and the analytes, of which the heteroconjugation between the anions in the ILs and the analytes plays a dominant role. The heteroconjugation between the anions of the ILs and analytes is proton sensitive and only a very small amount of proticsolvents added into the electrolyte solution can harm the separation. When EMIMCl concentration is high, the heteroconjugation between the IL anions and the proton in the analytes make the effective mobility of the analytes much higher than the EOF and their migration direction reversed. Finally, the six aromatic acids in water samples were analyzed by nonaqueous CE with low concentration of EMIMHSO₄ as background electrolytes with satisfactory results.