Hydrothermal synthesis and characterization of Nd-doped ZnSe nanoparticles with enhanced visible light photocatalytic activity

In the present study, Nd³⁺-doped ZnSe nanoparticles with variable Nd contents were successfully synthesized via a hydrothermal process using Neodymium (III) chloride hexahydrate as the doping source. X-ray diffraction, UV–Vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy and transmission electron microscopy were used for characterization of the synthesized nanoparticles. It was confirmed by the DRS analysis that both of the undoped and Nd-doped ZnSe samples had significant optical absorption in the visible light range. The photocatalytic performance of as-synthesized nanoparticles was investigated towards the decolorization of C. I. Acid Orange 7 solution under visible light irradiation. Results indicated that the loading of Nd dopant into ZnSe nanoparticles significantly enhanced the photocatalytic activity of pure ZnSe with increasing Nd loading up to 6 mol% (color removal efficiency of 24.31 % for ZnSe and 84.20 % for Nd_0.06Zn_0.94Se after 120 min of treatment) and then the photocatalytic activity began to decrease.     

In Silico and in Vitro Physicochemical Screening of Rigidoporus sp. Crude Laccase-assisted Decolorization of Synthetic Dyes—Approaches for a Cost-effective Enzyme-based Remediation Methodology

The objective of this paper is to compare in silico data with wet lab physicochemical properties of crude laccase enzyme isolated from Rigidoporus sp. using wheat bran as solid substrate support towards dye decolorization. Molecular docking analysis of selected nine textile and non-textile dyes were performed using laccase from Rigidoporus lignosus as reference protein. Enzyme-based remediation methodology using crude enzyme enriched from solid state fermentation was applied to screen the effect of four influencing variables such as pH, temperature, dye concentration, and incubation time toward dye decolorization. The extracellular crude enzyme decolorized 69.8 % Acid Blue 113, 45.07 % Reactive Blue 19, 36.61 % Reactive Orange 122, 30.55 % Acid Red 88, 24.59 % Direct Blue 14, 18.48 % Reactive Black B, 16.49 % Reactive Blue RGB, and 11.66 % Acid Blue 9 at 100 mg/l dye concentration at their optimal pH at room temperature under static and dark conditions after 1 h of incubation without addition of any externally added mediators. Our wet lab studies approach, barring other factors, validate in silico for screening and ranking textile dyes based on their proximity to the T1 site. We are reporting for the first time a combinatorial approach involving in silico methods and wet lab-based crude laccase-mediated dye decolorization without any external mediators.     

Experimental and modeling approach to decolorization of azo dyes by ultrasound: degradation of the hydrazone tautomer

Sonochemical bleaching of monoazo dyes C.I. Acid Orange 7 and C.I Acid Orange 8, which exist in their hydrazone forms in dye solutions, was investigated by irradiating 40 microM dye solutions using a 300 kHz emitter. It was found that the rate of bleaching was first-order with respect to the maximum absorption of the dye in the visible band and accelerated with increased acidity. Decolorization of Acid Orange 7 was slightly faster than that of Acid Orange 8 at equivalent test conditions. The oxidative degradation of Acid Orange 7 and Acid Orange 8 were modeled by means of density functional theory calculations. The adduct formation by hydroxyl radical attack to the carbon atom bearing the azo linkage was more preferred over the attack on the nitrogen atom. A competing reaction of hydrogen abstraction from the CH3 group in C.I Acid Orange 8 was found responsible for the difference in color removal rates.     

Modeling and optimization of simultaneous photocatalysis of three dyes on ceramic-coated TiO2 nanoparticles using chemometrics methods: phytotoxicological assessment during degradation process

In this paper, ceramic plates were used as a support of TiO₂ nanoparticles for photocatalytic decolorization of a mixture of three dyes. The three textile dyes (C.I. Basic Red 46, C.I. Basic Blue 3 and Malachite Green) were quantified simultaneously during the photocatalytic degradation process. The partial least squares modeling was successfully applied for the multivariate calibration of the spectrophotometric data. Also, the central composite design has been applied to the optimization of photocatalytic decolorization of the dye solution containing three dyes using an immobilized UV/TiO₂ process. The optimum initial concentration of three dyes, reaction time, and UV light intensity were found to be 5 mg/L, 240 min, and 47.2 W/m², respectively. The chronic phytotoxicity of mixture of dyes was evaluated using aquatic species Spirodela polyrhiza (S. polyrhiza) prior to and after photocatalysis. The phytotoxicity results revealed that the photocatalysis process could effectively reduce the phytotoxicity of the dyes from their aqueous solutions.     

Bacterial synthesis of magnetic Fe3O4 nanoparticles: Decolorization Acid Red 88 using FeNPs/Ca-Alg beads

The research studied the bacterial synthesis of magnetic iron oxide nanoparticles (FeNPs), their biological activity, and the biodegradation efficiency of Acid Red 88. An iron-resistant bacterial strain S2 was isolated from Choghart iron mine soil and selected to synthesize FeNPs. The phylogenetic analysis depended on 16S rDNA sequence comparison resolution and showed that strain S2 was 99.68% similar to Bacillus zhangzhouensis. FeNPs were identified by UV–Vis, FTIR, and XRD spectroscopy. SEM-EDX conclusions corroborated the size of FeNPs in the range of 20–70 nm in the rhombus form. The finding indicated that FeNPs had antimicrobial activity on tested bacteria. According to the brine shrimp lethality (BSL) test, FeNPs showed great anticancer activity with LC₅₀ value of 0.5 μg/ml. The biodegradation of Acid Red 88 was investigated separately by FeNPs/Ca-Alg beads and FeNPs powder. FeNPs/Ca-Alg beads decolorized Acid Red 88 with 100% efficiency after 24 h, while FeNPs powder decolorized Acid Red 88 with 100% efficiency after 72 h. Moreover, Ca-Alg beads were applied as control and could not decolorize the dye. Decolorization of Acid Red 88 using FeNPs/Ca-Alg beads was investigated by GC/MS analysis. In this analysis, no mass was found related to the initial mass of Acid Red 88. According to these conclusions, it can be inferred that the dye is completely decomposed. The toxicity of Acid Red 88 dye, and the decolorization products, was assessed using BSL and phytotoxicity test. The conclusions determined that Acid Red 88 dye had toxicity effect. Further, the decolorization products could not kill half of the shrimp due to their low toxicity and did not inhibit the germination of radish seeds.     

Accelerating Effect of Bio-Reduced Graphene Oxide on Decolorization of Acid Red 18 by Shewanella algae

In this study, the effects of bio-reduced graphene oxide (BRGO) on the bio-reduction of Acid Red 18 (AR 18) by Shewanella algae were first investigated, and a possible mechanism of BRGO-mediated AR 18 bio-decolorization was proposed. The prepared BRGO was characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffractometer (XRD), infrared spectroscopy (IR), Raman spectra, and transmission electron microscope (TEM), respectively. Moreover, electrochemical experiment demonstrated that BRGO is of good electrical conductivity. AR 18 bio-decolorization could be enhanced in dose-dependent manner of BRGO. The maximum increase in AR 18 removal efficiency was observed at a dose of 0.075 g L^?1 BRGO. Under the same conditions, BRGO could also improve the decolorization rates of Acid Red 88, Acid Red 27, and Acid Red 73. During decolorization, the formation of BRGO and cells composite was observed, which is beneficial for transferring electrons from cells to BRGO. In addition, BRGO could accelerate the bio-decolorization of AR 18 under saline conditions (2–7 %). These findings indicate that BRGO can accelerate the electrons transfer from cells to azo dyes.     

Biodecolorization of Azo Dye Remazol Orange by Pseudomonas aeruginosa BCH and Toxicity (Oxidative Stress) Reduction in Allium cepa Root Cells

In this report a textile azo dye Remazol orange was degraded and detoxified by bacterium Pseudomonas aeruginosa BCH in plain distilled water. This bacterial decolorization performance was found to be pH and temperature dependent with maximum decolorization observed at pH 8 and temperature 30 °C. Bacterium tolerated higher dye concentrations up to 400 mg?l^?1. Effect of initial cell mass showed that higher cell mass concentration can accelerate decolorization process with maximum of 92 % decolorization observed at 2.5 g?l^?1 cell mass within 6.5 h. Effect of various metal ions showed Mn has inducing effect whereas Zn strongly inhibited the decolorization process at 5 mM concentration. Analysis of biodegradation products carried out with UV–vis spectroscopy, HPTLC and FTIR confirmed the decolorization and degradation of Remazol orange. Possible route for the degradation of dye was proposed based on GC-MS analysis. During toxicological scrutiny in Allium cepa root cells, induction in the activities of superoxide dismutase (SOD), guaiacol peroxidase (GPX) and inhibition of catalase (CAT) along with raised levels of lipid peroxidation and protein oxidation in dye treated samples were detected which conclusively indicated the generation of oxidative stress. Less toxic nature of the dye degraded products was observed after bacterial treatment.     

Decolorization and partial degradation of selected azo dyes by methanogenic sludge

The toxicity potential and decolorization of three acid azo dyes (Acid Orange 6, Acid Orange 7, and Acid Orange 52) by methanogenic granular sludge from an anaerobic expanded granular sludge bed reactor was assayed. Complete bioreduction was found for all three azo dyes. Sulfanilic acid and 4-aminoresorcinol were detected from the decolorization of Acid Orange 6, sulfanilic acid and 1-amino-2-naphtol were detected from the reduction of Acid Orange 7, and sulfanilic acid and N,N-dimethyl-1,4-phenylenediamine (DMP) were found to be intermediates of Acid Orange 52 degradation. Sulfanilic acid and 1-amino-2-naphtol were persistent in the anaerobic conditions, whereas 4-aminoresorcinol was completely mineralized by anaerobic sludge and DMP was transformed into 1,4-phenylenediamine. Enrichment cultures obtained via consecutive passages on basal medium with only azo dye as a carbon and an energy source seemed to be morphologically heterogeneous. Baculiform and coccus cells were found when viewed under a light microscope. Cocci were joined in chains. Because anaerobic sludge contains sulfate-reducing bacteria and therefore may generate sulfide, azo dyes were tested for chemical decolorization by sulfide to compare rates of chemical and biologic reduction.     

Oxidation of azo dye Orange II with hydrogen peroxide catalyzed by 5,10,15,20-tetrakis[4-(diethylmethylammonio)phenyl]porphyrinato-cobalt(II)tetraiodide in aqueous solution

The catalytic oxidation of the azo dye Orange II by hydrogen peroxide in aqueous solution has been investigated using 5,10,15,20-tetrakis-[4-(diethylmethylammonio)phenyl]porphyrinato-cobalt(II) tetra iodide 1as catalyst. The oxidation reaction was followed by recording the UV–vis spectra of the reaction mixture with time at λ_max = 485 nm. The factors that may influence the oxidation of Orange II, such as the effect of reaction temperature, concentration of catalyst, hydrogen peroxide and orange II have been studied. The results of total organic carbon analysis showed 52% of dye mineralization under mild reaction conditions. Residual organic compounds in the reaction mixture were identified by using Gas chromatography-mass spectrometry. The decolorization rate and mineralization of the dye has been found to increase with increase of catalyst concentration and reaction temperature. The rate of dye oxidation decreased with increasing the concentration of dye, H₂O₂ and at higher pH than 9. Radical scavenging measurement indicated that decolorization of Orange II by H₂O₂/cobalt (II) porphyrin complex 1 involved the formation of hydroxyl radicals as the active species.     

Key Factors Regarding Decolorization of Synthetic Anthraquinone and Azo Dyes

The factors affecting decolorization of anthraquinone dye represented by Reactive Blue 4 (RB4) and azo dye represented by Methyl Orange (MO) were studied in batch experiments under mesophilic (35 °C) and thermophilic (55 °C) anaerobic conditions. The results indicated differences in decolorization properties of the dyes with different chromophore structures. In abiotic conditions, MO could be decolorized by a physicochemical reaction when it was sterilized at 121 °C together with sludge cells or glucose. RB4 only showed absorption onto the cell mass. The presence of a redox mediator accelerated the decolorizing reaction when supplied together with glucose in the presence of sterilized sludge cells. In biotic conditions, the results indicated that the biological activity of microorganisms was an important factor in decolorization. The main factor involved in decolorization was the conversion of cosubstrate as electron donor, which reacted with dye as an electron acceptor in electron transfer. Redox mediators, anthraquinone-2-sulfonic acid, and anthraquinone could accelerate decolorization even if a small amount (0.2 mM) was applied. On the other hand, a high concentration of redox mediator (1.0 mM) had an inhibitory effect on decolorization especially under thermophilic conditions. In addition, the decolorization of dye was accelerated by increasing treatment temperature, as shown in biotic treatments. Based on these results, increasing the treatment temperature could be used to improve the decolorizing process of textile dye wastewater treatment, especially for recalcitrant dyes such as anthraquinone.     

A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation

Sulfur and copper codoped TiO₂ nanoparticles were prepared by sol-hydrothermal process. And the samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectra analysis, scanning electron microscopy, Brunauer Emmett Teller analysis, UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectra and X-ray fluorescence analysis. It was found that the S, Cu-codoped TiO₂ became amorphous with the increase of Cu content, and copper on the surface of TiO₂ existed in the oxidation state of Cu(II) while S in the form of S⁶⁺ species. And the codoped particles had higher surface area, smaller particle size, stronger spectral response in visible region compared with pure TiO₂. The effects of doping amount in a wide range, catalyst dosage, and recycle on the photocatalytic activity of the codoped catalysts were investigated with Acid Orange 7 as the model compound under visible light illumination (λ > 447 nm). The results showed that S (2.0 %), Cu (5.0 %) codoped TiO₂ had the highest visible light photocatalytic activity and good reusability performance. The kinetic study showed that this photocatalytic process coincided with the Langmuir–Hinshelwood pseudo first order reaction model.     

Polypyrrole-coated cotton textile as adsorbent of methylene blue dye

Pollution caused by organic dyes is of serious environmental and health concern to the population. Dyes are widely used in textile coloring applications. In the present work, cotton textile was coated with a conducting polymer, polypyrrole (PPy), in situ during the oxidative polymerization of pyrrole. The resulting materials were utilized as easily separated and recyclable adsorbent for the removal of methylene blue (MB) as a model of cationic dyes in alkaline solutions. It showed also some affinity to remove Acid Green 25 as an anionic dye in acidic medium. The adsorption was assessed by monitoring the decrease in dye concentration by UV–Visible absorption spectroscopy. The influence of various parameters such as initial dye concentration, contact time, pH, temperature, and adsorbent dose on the adsorption process was studied. The pseudo-second-order kinetic model and Freundlich isotherm model were found to describe the adsorption process. The thermodynamic study revealed that the adsorption of MB by PPy was feasible, spontaneous, and exothermic process. Investigation of the substrate regeneration revealed that PPy deposited on cotton textile can be reused for dye adsorption several times with good efficiency and it allows for the recovery of MB for recycling purposes.     

Enzymatic Decolorization of Anthraquinone and Diazo Dyes Using Horseradish Peroxidase Enzyme Immobilized onto Various Polysulfone Supports

In this study, covalent immobilization of the horseradish peroxidase (HRP) onto various polysulfone supports was investigated. For this purpose, different polysulfones were methacrylated with methacryloyl chloride, and then, nonwoven fabric samples were coated by using solutions of these methacrylated polysulfones. Finally, support materials were immersed into aquatic solution of HRP enzyme for covalent immobilization. Structural analysis of enzyme immobilization onto various polysulfones was confirmed with Fourier transform infrared spectroscopy, atomic force microscopy, and proton nuclear magnetic resonance spectroscopy. Decolorization of textile diazo (Acid Black 1) and anthraquinone (Reactive Blue 19) dyes was investigated by UV–visible spectrophotometer. Covalently immobilized enzyme has been used seven times in freshly prepared dye solutions through 63 days. Dye decolorization performance of the immobilized systems was observed that still remained high (70 %) after reusing three times. Enzyme activities of immobilized systems were determined and compared to free enzyme activity at different conditions (pH, temperature, thermal stability, storage stability). Enzyme activities of immobilized systems and free enzyme were also investigated at the different temperatures and effects of temperature and thermal resistance for different incubation time at 50 °C. In addition, storage activity of free and immobilized enzymes was determined at 4 °C at different incubation days.     

C.I. Reactive Orange 16-dodecylpyridinium chloride interactions in electrolytic solutions

The effect of electrolytes on the interaction between an anionic dye and a cationic surfactant was investigated spectrophotometrically in submicellar concentration range at certain temperature. The spectral change of the azo dye C.I. Reactive Orange 16 (RO16) exhibits a high sensitivity to the polarity of dye's environment. Dodecylpyridinium chloride (DPC) affects the electronic absorption spectra of dye solution that is dye-surfactant interaction results formation of complex and therefore a decrease in maximum absorption spectra (1.577 at 494 nm). The electrolyte cations cause an increase of the absorbance of DPC-RO16 ion-pair complex in the following order: Ca(2+)>Na(+)>NH(4)(+)>K(+)>Mg(2+), also for electrolyte anions Br(-)>Cl(-)>SO(4)(2-). Furthermore, this order can be changeable with increasing electrolyte concentration. The increase on absorbance value with increasing electrolyte concentration is explained as charge screening. The increase or decrease on absorption spectra of RO16-DPC solution depends on concentration range of the electrolyte added. As an increase on absorbance value with increasing electrolyte concentration is explained as charge screening, a decrease in this value for higher concentration of electrolyte is attributed as the charge of micelle shape.     

Chitosan–sodium alginate encapsulated Co-doped ZrO<Subscript>2</Subscript>–MWCNTs nanocomposites for photocatalytic decolorization of organic dyes

Photocatalytic decolorization properties of cobalt doped-ZrO₂-multiwalled carbon nanotubes (Co–ZrO₂–MWCNTs) and chitosan–sodium alginate encapsulated Co–ZrO₂–MWCNTs (CS/Alg–Co–ZrO₂–MWCNTs) with varying weight percentage of Co–ZrO₂–MWCNTs are presented in this research paper. The Co–ZrO₂–MWCNTs was first synthesized through homogenous co-precipitation method and introduced into the chitosan–sodium sodium alginate (CS/Alg) biopolymer matrix. The bio-nanocomposites were characterized using X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, (UV–Vis)-spectroscopy and energy dispersive spectroscopy to obtain information on their structure, formation, morphology, size and elemental analysis. The photodecolorization efficiency of the samples was determined through their decolorization of trypan blue dye aqueous solution in 180 min. Recyclability of the catalysts was also assessed. The bio-nanocomposites experienced reduced band gap values with subsequent improvement in visible light activity compared to the uncapped Co–ZrO₂–MWCNTs. All the CS/Alg–Co–ZrO₂–MWCNTs exhibited higher photodecolorization activities than the uncapped Co–ZrO₂–MWCNTs. The most efficient catalyst (CS/Alg–40 % Co–ZrO₂–MWCNTs) with a band gap of 2.56 eV displayed 94 % decolorization efficiency of the dye. Though reusability of the catalyst is significant, its efficiency diminished consistently after each cycle.     

Improved Biodegradation of Synthetic Azo Dye by Anionic Cross-Linking of Chloroperoxidase on ZnO/SiO<Subscript>2</Subscript> Nanocomposite Support

A novel ZnO nanowire/macroporous SiO₂ composite was used as a support to immobilize chloroperoxidase (CPO) by in situ cross-linking method. An anionic bi-epoxy compound was synthesized and used as a long-chained anionic cross-linker, and it was adsorbed on the surface of ZnO nanowires through static interaction before reaction with CPO, creating a new approach to change the structure, property, and catalytic performance of the produced cross-linking enzyme aggregates (CLEAs) of CPO. The immobilized CPO showed high activity in the decolorization of three azo dyes. The effect of various conditions such as the loading amount of CPO, solution pH, temperature, and dye concentration was optimized on the decolorization. Under optimized conditions, the decolorization percentage of Acid Blue 113, Direct Black 38, and Acid Black 10 BX reached as high as 95.4, 92.3, and 89.1%, respectively. The immobilized CPO exhibited much better thermostability and resistance to pH inactivation than free CPO. The storage stability and reusability were greatly improved through the immobilization. It was found from the decolorization of Acid Blue 113 that 83.6% of initial activity retained after incubation at 4 °C for 60 days and that 80.9% of decolorization efficiency retained after 12 cycles of reuses.     

Optimization of the oxalate catalyzed photoelectro-Fenton process under visible light for removal of Reactive Red 195 using a carbon paper cathode

The decolorization of Reactive Red 195 (RR195) by the oxalate catalyzed photoelectro-Fenton (PEF) process using carbon paper electrode as a cathode under visible light was studied. Comparison between electro-Fenton (EF), PEF, and PEF/oxalate processes for the removal of RR195 showed that color removal follows in decreasing order: PEF/oxalate > PEF > EF. Response surface methodology (RSM) was used to determine the effects of the four main independent parameters (initial dye, oxalate and Fe³⁺ concentrations, and reaction time) on decolorization efficiency. A high coefficient of determination value (R ² = 0.963) has resulted from the analysis of variance (ANOVA). The optimum values of the initial Fe³⁺ concentration, the initial amount of oxalate, the initial dye concentration, and the reaction time were found to be 0.3 mM, 0.6 mM, 20 mg/L, and 120 min, respectively. A high decolorization efficiency (>93 %) was experimentally obtained for RR195 under the established optimum conditions. The response surface plots were employed to establish the effect of experimental parameters on the decolorization efficiency. These results clearly indicated the success of RSM as a suitable method for optimizing the operating conditions. The mineralization of the dye was investigated by total organic carbon (TOC) measurement. 96.2 % mineralization of 50 mg/L RR195 was observed at 9 h.     

α-Fe2O3 nanoflowers: synthesis,characterization, electrochemical sensing and photocatalytic property

Nanoflower structured α-Fe₂O₃ was synthesized by adding hexamine to an aqueous solution of ferrous sulphate followed by drying and annealing at 600 °C for 6 h. X-ray diffraction analysis, Fourier-transformed infrared spectroscopy, Raman and DRS UV–visible absorption spectroscopy showed the formation of α-Fe₂O₃ with good crystalline nature. Field emission-scanning electron microscopy investigation revealed that the α-Fe₂O₃ has flower-like morphology, which is composed of nanorods. Cyclic voltammetry and chronoamperometry were used to investigate their electrochemical sensing property towards uric acid (UA). α-Fe₂O₃ exhibited enhanced sensing behavior with respect to that of bare GCE. Additionally, the α-Fe₂O₃ nanoflowers exhibit better photocatalytic activity of up to 71.7 % against rhodamine B (RhB) in short time of 60 min under visible light irradiation. It is found that the smaller crystallite size and flower-like morphology play a vital role in allowing an interaction between α-Fe₂O₃ and UA or RhB dye which enhances both the electrochemical sensing and photocatalytic activity.     

Voltammetric Determination of Dye-Uptake for C. I. Acid Blue 120 Dyeing Silk

Abstract

The electrochemical behavior of Colour Index Acid Blue 120 at carbon paste electrode is studied with cyclic voltammetry and square wave voltammetry for the first time. Two irreversible oxidative peaks at 0.61 V (P_a,1) and 0.90 V(P_a,2) (both vs. SCE) are found at a scan rate of 0.1 V/s. Their electrode processes are both adsorption-controlled with two electrons and two protons participating. The peak currents of the P_a,1 are proportional to the concentration of Colour Index Acid Blue 120 in the range of 2.08–20.80 µM and 62.4–520.0 µM. The coexisting substances such as inorganic ions and fatty alcohol polyoxyethylene ether do not interfere with the determination. The method is applied to the determination of dye-uptake for Colour Index Acid Blue 120 dyeing silk. The results are in good agreement with the spectrophotometric method.     

Selective Second Order Derivative Spectrophotometric Method for the Determination of Gallium(III) in Presence of Large Excess of Indium(III)

Abstract

A simple, sensitive, and selective second order derivative spectrophotometric method is proposed for the determination of microgram quantities of gallium(III) especially in presence of large excess of indium(III). Ga(III) reacts with 2‐hydroxy‐3‐methoxy benzaldehyde isonicotinoylhydrazone (HMBAINH) chromogene forming an intense greenish yellow coloured soluble complex in acidic buffers and in presence of 0.2% of triton X‐100. The complex showed maximum absorption at 405 nm and at pH 5.0, where the reagent has negligible absorbance. A second order derivative spectrum of the complex solution showed maximum derivative amplitude at 415 nm and again at 460 nm with a zero cross at 442 nm. Beer's law was obeyed in the concentration range 0.036–1.533 µg/ml and 0.070–1.533 µg/ml of Ga(III) at 415 nm and 460 nm, respectively. However, at 404 nm In(III)‐HMBAINH complex showed zero amplitude in the second order derivative spectrum where Ga(III)‐HMBAINH obeyed Beer's law in the range of 0.070–1.394 µg/ml. This allows determination of Ga(III) in presence of large excess of In(III) by second order derivative spectrophotometry. The tolerance limits of other diverse ions and other analytical parameters were also evaluated. The method was applied for the determination of gallium in some synthetic mixtures containing indium.