In situ Raman and UV-vis spectroscopic studies of polypyrrole and poly(pyrrole-2,6-dimethyl-β-cyclodextrin)

Polypyrrole (PPy) and poly(pyrrole-2,6-dimethyl-β-cyclodextrin) [P(Py-β-DMCD)] films prepared by potential cycling in aqueous acidic solutions on indium tin oxide (ITO)-coated glass and gold electrodes were studied by in situ UV-vis and Raman spectroscopy. Characteristic UV-vis and Raman bands were identified and their dependencies on the electrode potential have been discussed. Spectroelectrochemical results reveal differences both in the position of the spectral bands and their potential dependence for PPy and P(Py-β-DMCD) films indicating interactions between polymer chains and CDs during electropolymerization process. The films were also characterized by cyclic voltammetry and FT-IR spectroscopy.     

Preparation of high-quality organic semiconductor nanoparticle films by solvent-evaporation-induced self-assembly

Organic semiconductor nanoparticles are expected to be used in organic optical and electronic devices due to their unique optical and electrical properties. However, no method has been reported for the preparation of high-quality organic nanoparticle films without remaining additives and being capable of dealing with binary nanoparticle blends. We developed a simple approach to fabricate high-quality organic semiconductor nanoparticle films from their aqueous solutions by solvent-evaporation-induced self-assembly. Only volatile solvents are employed in the nanoparticle solutions, so the self-assembled nanoparticle films are free of additives. Moreover, this method is also suitable for fabricating thin films containing binary nanoparticles. Therefore, it paves the way for potential applications of organic semiconductor nanoparticles in nanoscale optical and electronic devices.     

Optical activity of chiral thin film and liquid crystal hybrids

Using the glancing angle deposition (GLAD) technique, we have fabricated porous, chiral thin films with optically anisotropic helical microstructures that exhibit optical phenomena such as wavelength specific rotation of linearly polarized light. Initial research has shown that the porosity of the films allows for the addition of nematic liquid crystals (NLCs) to the films for promising applications in dynamically switchable devices, while simultaneously enhancing the optical properties of the film. This study describes the fundamental optical behaviour of LC-filled chiral thin films in relation to material, porosity, structure and thickness. It was found that for SiO₂ films, the addition of NLCs increased the effective rotatory power by two-fold when compared with results from the film without added LCs. The rotatory power of Al₂O₃ and MgF₂ films, while being similarly increased by the addition of LCs, exhibited a reversal in sign, or direction of rotation, for the visible wavelength spectrum investigated. The effects of film porosity and structure were studied by varying the angle of incidence from 83° to 86°; it was found that the greater porosity of the films deposited at larger angles allowed for more filling by the LCs and thus a larger increase in rotatory power. Finally, the addition of LCs was observed to shift the wavelength of peak rotation towards smaller values.     

CO-sensing properties of undoped and doped tin oxide thin films prepared by electron beam evaporation

Undoped thin films of tin oxide and those doped with indium oxide and nickel oxides were deposited by electron beam evaporation. The effects of the film thickness and preparation conditions (films prepared with or without the presence of oxygen environment during deposition) on the optical and carbon monoxide sensing properties of the films were studied. The films were characterized using X-ray diffraction and X-ray photoelectron spectroscopy and optical spectroscopy techniques. All the films were found to be amorphous. It was found that the sensitivity of the films to CO increased with the thickness and the porosity of the films. It was found that their selectivity to CO gas relative to CO₂ and SO₂ gases could be improved upon doping the films with indium (or nickel) oxide.     

On the electron transfer mechanism between cytochrome C and metal electrodes. Evidence for dynamic control at short distances

Cytochrome c was coordinatively bound to self-assembled monolayers of pyridine-terminated alkanethiols on Au and Ag electrodes. The mechanism of heterogeneous electron transfer of the immobilized protein was investigated by cyclic voltammetry and time-resolved surface-enhanced resonance Raman spectroelectrochemistry. The temperature, distance, and overpotential dependencies of the electron transfer rates indicate a change of mechanism from a tunneling controlled reaction at long distances (thicker films) to a solvent/protein friction controlled reaction at smaller distances (thinner films).     

Optical activity of chiral thin film and liquid crystal hybrids

Using the glancing angle deposition (GLAD) technique, we have fabricated porous, chiral thin films with optically anisotropic helical microstructures that exhibit optical phenomena such as wavelength specific rotation of linearly polarized light. Initial research has shown that the porosity of the films allows for the addition of nematic liquid crystals (NLCs) to the films for promising applications in dynamically switchable devices, while simultaneously enhancing the optical properties of the film. This study describes the fundamental optical behaviour of LC-filled chiral thin films in relation to material, porosity, structure and thickness. It was found that for SiO₂ films, the addition of NLCs increased the effective rotatory power by two-fold when compared with results from the film without added LCs. The rotatory power of Al₂O₃ and MgF₂ films, while being similarly increased by the addition of LCs, exhibited a reversal in sign, or direction of rotation, for the visible wavelength spectrum investigated. The effects of film porosity and structure were studied by varying the angle of incidence from 83° to 86°; it was found that the greater porosity of the films deposited at larger angles allowed for more filling by the LCs and thus a larger increase in rotatory power. Finally, the addition of LCs was observed to shift the wavelength of peak rotation towards smaller values.     

Growth of organic n-conductors on thin polymer films for use in organic field effect transistors

Thin films of different polymers - poly(styrene) (PS), poly(methylmethacrylate) (PMMA), poly(vinylcarbazole) (PVCz), poly(vinylchloride) (PVC) and poly(vinylidene fluoride) (PVDF) - were deposited by spin-coating or by vapor deposition. On these polymers, thin films of (hexadecafluorophthalocyaninato)-oxovanadium (F₁₆PcVO) were prepared by physical vapor deposition. The growth of these films was monitored in situ by optical spectroscopy. The optical absorbance spectra were analyzed based on the coupling of transition dipoles to obtain information on the intermolecular arrangement of chromophores in the films. In all of these samples, the molecules are oriented with their molecular plane preferentially perpendicular to the substrate surface. This gives the desired overlap of the π-systems for electric conductance parallel to the substrate. Differences in the interactions were detected when deposition temperatures below or above the glass transition temperature of a given polymer were compared. The morphology of the polymer films and the deposited semiconductors were investigated by atomic force microscopy and scanning electron microscopy. The influence of the chosen substrate on the film structure is determined. The optical and electric properties of the films could thereby be influenced and the applicability of such films as active layers in organic thin film transistors is discussed.     

Hybrid Electrochromic Multilayer Films Based on Fe(II)-Metalloviologens and TiO2 Nanoparticles

Metallosupramolecular coordination polyelectrolyte, Fe(II)-metalloviologen(FEN), was prepared by the reaction of Fe(II) with a novel bisterpyridine ligand. As active components, FENs could be assembled into electrochromic multilayer films with negative charged polystyrene sulfate(PSS) by the sequential deposition layer-by-layer technique. Numerous analytical instruments, such as UV-Vis spectroscopy, atomic force microscopy(AFM), tunneling electron microscopy(TEM), zeta-potential measurement and electrochemical measurement have been utilized to characterize their morphology, optical and electrochromic properties. It has been observed that as-prepared films exhibited multi-colour changes by triggering with different potentials. However, the low optical contrast of multilayer films would limit their further applications. In order to overcome this problem, semiconductor TiO₂ nanoparticles(TiO₂) were incorporated into FEN multilayers by layer-by-layer approach. By carefully optimizing the film structure, as-resulted hybrid films containing FEN, TiO₂ and PSS exhibited high optical contrast, suitable response time and long-term stability. Such hybrid films should be promising candidates to meet the requirements for deve- loping flexible displays and electrochromic devices.     

Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films

Electrical conductivity and optical properties of polypyrrole-chitosan（PPy-CHI） conducting polymer composites have been investigated to determine the optical transition characteristics and energy band gap of composite films.The two electrode method and I-V characteristic technique were used to measure the conductivity of the PPy-CHI thin films,and the optical band gap was obtained from their ultraviolet absorption edges.Depending upon experimental parameter,the optical band gap（E_g） was found within 1.30-2.32 eV as estimated from optical absorption data.The band gap of the composite films decreased as the CHI content increased.The room temperature electrical conductivity of PPy-CHI thin films was found in the range of 5.84×10^-7-15.25×10^-7 S·cm^-1 depending on the chitosan content.The thermogravimetry analysis（TGA） showed that the CHI can improve the thermal stability of PPy-CHI composite films.     

Wavelength dependence of nanoscale photodegradation in poly(3-octylthiophene) thin films

The use of conducting polymers in optoelectronic devices is subject to the understanding of the electro-optical processes that take place at the nanoscale. One of the photo-induced processes that limit their application is the photodegradation, which reduces the device working life. In this work the photodegradation of poly(3-octylthiophene) thin films was studied by combining Kelvin probe microscopy and optical microscopy. In this way, a direct correlation between morphological and contact potential changes with optical density changes as a function of the irradiation wavelength and intensity can be made. These results, complemented with Raman spectra help to clarify the degradation processes that are taking place. We find that the photodegradation strongly depends on the irradiation wavelength blue light being much more aggressive than UV. In addition, the optical properties change abruptly before any substantial change in the morphology is observed.     

Discovery of novel dyes with absorption maxima at 1.1 microm

During the process of developing organic molecules that match the wavelengths used in optical communications, we have discovered a new class of dyes, with absorption maxima at 1.1 mum, and clarified their molecular structures. The synthesis of this class of dyes was supposed to involve unexpected intramolecular tandem reactions, and the effect of alkyl substituents on such a synthesis was investigated. As a result, an effective alkyl-substituent structure for realizing a high synthetic yield and good solubility in organic solvents was found. Furthermore, thin films made of such a highly soluble dye were fabricated by solution-coating, and they exhibited a red-shifted absorption band with a maximum at approximately 1.3 mum, indicating the formation of J-like aggregates. The third-order nonlinear optical susceptibility chi(3) of these thin films at 1.3 mum, which is the wavelength used in optical communications, was measured by the Z-scan technique. The magnitude of chi(3) reaches approximately 10-7 esu. These results suggest that the solution-coated thin films of this type of dye are potential materials for optical switching at 1.3 mum and for other nonlinear optical applications.     

Layer-by-layer construction of protein architectures through avidin–biotin and lectin–sugar interactions for biosensor applications

In this review, the preparation and properties of protein architectures constructed by layer-by-layer (LbL) deposition through avidin–biotin and concanavalin A (Con A)–sugar interactions are discussed in relation to their use for optical and electrochemical biosensors. LbL films can be constructed through the alternate deposition of avidin and biotin-labeled enzymes on the surfaces of optical probes and electrodes. The enzymes retain their catalytic activity, resulting in the formation of optical and electrochemical biosensors. Alternatively, Con A can be used to construct enzyme-containing LbL films and microcapsules using sugar-labeled enzymes. Some enzymes such as glucose oxidase and horseradish peroxidase can be used for this purpose without labeling with sugar, because these enzymes contain intrinsic hydrocarbon chains on their molecular surfaces. The Con A/enzyme LbL architectures were successfully used to develop biosensors sensitive to specific substrates of the enzyme. In addition, Con A-based films can be used for the optical and electrochemical detection of sugars.     

一种近红外光记录与存储材料——克酮酸染料的三阶非线性光学性质

克酮酸染料是一类新型的近红外吸收染料,由于具有良好的光热稳定性和荧光性能,因而在光记录与存储等领域有着潜在的应用价值.本文利用简并四波混频技术,在近红外区不同吸收波长,在脉宽为130 fs条件下研究了一种吲哚克酮酸染料在溶液和薄膜中的三阶非线性光学性质.该克酮酸染料在773 nm,四氢呋喃溶液中的共振三阶超分子极化率γ为5.3×10^-29esu,在薄膜中的共振三阶非线性极化率χ⁽³⁾值达到10^-8esu数量级.同时,对于三阶非线性光学响应及其动力学机制也进行了研究和探讨.     

Elimination of porosity in heavily rare-earth doped sol–gel derived silicate glass films

The combination of spin-coating and rapid thermal annealing is a very important sol–gel technique to prepare high quality silicate glass films, widely used in the fabrication of waveguides, photonic bandgap structures and other film-based optical devices. This work found that high rare-earth concentrations will seriously affect the optical quality of the films prepared by the spin-coating/rapid thermal annealing process, with pores with hundreds of nanometres in size being found in heavily rare-earth doped aluminosilicate glass films, causing significant light scattering. However, it was also found that a new recipe using acetylacetone was able to dramatically eliminate these pores and to improve the film optical quality, even for rare-earth concentrations as high as 15 mol%. This result will be useful for the fabrication of sol–gel derived devices based on rare-earth doped silicate glass films like active waveguides, functional films and photonic bandgap structures.     

Influence of the substrate type on the microstructural,optical and electrical properties of sol–gel ITO films

Indium tin oxide (ITO) is recognized as the best transparent and conductive material [transparent conducting oxide (TCO)] until now and its properties are dependent on the preparation method. In the present work ITO films with In:Sn atomic ratio 9:1 were prepared by a sol–gel route on different substrates (microscope glass slides, microscope glass covered with one layer of SiO₂ and Si wafers) for TCO applications. The multilayer ITO films were obtained by successive deposition by the dip-coating method and the films were characterized from the structural, morphological, optical, and electrical points of view using X-ray diffraction, scanning electron microscopy, atomic force microscopy, spectroscopic ellipsometry and by Hall effect measurements, respectively. The results showed that the thickness, optical constants and carrier numbers depend strongly on the type of substrate, number of deposited layers and sol concentration. The optical properties of ITO films are closely related to their electrical properties. The enhancement of the conductivity was possible with the increase of crystallite size (which occurred after thermal treatment) and with the reduction of surface roughness.     

Foam films stabilized with dodecyl maltoside. 2. Film stability and gas permeability

The gas permeability and stability of foam films stabilized by n-dodecyl-beta-D-maltoside (beta-C(12)G(2)) were determined. The permeability coefficient (K, cm/s) and the mean film lifetime were measured as a function of the surfactant concentration. The films are less permeable than those stabilized by other surfactants at comparable conditions. The permeability coefficient decreases with increasing surfactant concentration. It does not show a remarkable dependence on the salt concentration. Stable Newton black foam films (NBFs) are formed above a surfactant concentration of 3.9 x 10(-)(6) M beta-C(12)G(2) in the presence of 0.2 M NaCl. The theory of nucleation hole formation in NBFs was applied to describe the observed dependencies of the permeability and film stability on the surfactant concentration. The theory gave satisfactory relation to the experiment.     

Optical, electrical and dielectric properties of TiO2-SiO2 films prepared by a cost effective sol-gel process

Titanium dioxide (TiO(2)) and silicon dioxide (SiO(2)) thin films and their mixed films were synthesized by the sol-gel spin coating method using titanium tetra isopropoxide (TTIP) and tetra ethyl ortho silicate (TEOS) as the precursor materials for TiO(2) and SiO(2) respectively. The pure and composite films of TiO(2) and SiO(2) were deposited on glass and silicon substrates. The optical properties were studied for different compositions of TiO(2) and SiO(2) sols and the refractive index and optical band gap energies were estimated. MOS capacitors were fabricated using TiO(2) films on p-silicon (100) substrates. The current-voltage (I-V) and capacitance-voltage (C-V) characteristics were studied and the electrical resistivity and dielectric constant were estimated for the films annealed at 200°C for their possible use in optoelectronic applications.     

Influence of Mn incorporation on the structural and optical properties of sol gel derived ZnO film

Undoped and manganese doped ZnO (ZnO:Mn) films were prepared by sol gel method using spin coating technique. The effect of Mn incorporation on the structural and optical properties of the ZnO film has been investigated. The crystalline structure and orientation of the films have been investigated by using their X-ray diffraction spectra. The films exhibit a polycrystalline structure. Mn incorporation led to substantial changes in the structural characteristics of the ZnO film. The scanning electron microscopy (SEM) images of the films showed that the surface morphology of the ZnO film was affected by the Mn incorporation. The transparency of the ZnO film decreased with the Mn incorporation. The optical band gap and Urbach energy values of the ZnO and ZnO:Mn films were found to be 3.22, 3.19 eV and 0.10, 0.23 eV, respectively. The optical constants of these films, such as refractive index, extinction coefficient and optical dielectric constants were determined using transmittance and reflectance spectra. The refractive index dispersion curve of the films obeys the single oscillator model with dispersion parameters. The oscillator energy, E _o , and dispersion energy, E _d, of the films were determined 5.30 and 16.26 eV for ZnO film and 5.80 and 12.14 eV for ZnO:Mn film, respectively.     

TixV1-xO2薄膜的光学及相变特性

采用射频磁控溅射方法,在c-Al2O3(0001)基底上制备了不同钒钛比例的TixV1-xO2(0≤x≤1)薄膜,利用X射线衍射(XRD)、拉曼(Raman)光谱、紫外-可见-近红外(UV-Vis-NIR)光谱对薄膜结构及光学性能进行测试分析,计算薄膜的太阳能智能调节率和光学带隙.实验结果及分析表明:随着Ti含量的增加,薄膜的红外调节特性和热滞特性逐渐减弱直至消失;薄膜样品的光学带隙随着Ti含量的增加而变宽,光响应范围发生蓝移;其光学带隙随着V含量的增加而变窄,光响应范围发生红移.