Preparation and Evaluation of P-tert-Butyl-calix[8]arene-bonded Silica Stationary Phase for High Performance Liquid Chromatography

ABSTRACT

A new p-fert-butyl-calix[8]arene-bonded silica gel stationary phase was synthesized through heterogeneous functionalisation of suspended porous silica. A characterization of its structure was carried out by using elemental analysis, FTIR and ¹³C solid state NMR spectroscopy. Chromatographic performance of the new packing material was investigated by employing polycyclic aromatic hydrocarbons (PAHs) as probes and using methanol-water as mobile phase. The investigations show that the new stationary phase behaves as a reversed phase stationary phase. The liquid chromatographic separation of PAHs solutes on the new bonded phase was compared with that on a p-tert-butyl-calix[4]arene-bonded silica stationary phase. The new p-tert-butyl-calix[8]arene-bonded phase exhibited higher retention and better separation selectivity, although the carbon content and coverage of the new packing material was lower than that of the p-tert-butyl-calix[4]arene bonded silica stationary phase. A possible retention mechanism for the new packing material was also proposed.     

Development of a micro dual beam fluorometric detector specific for microchip analysis of benzo[a]pyrene and benzo[k]fluoranthene in diesel exhaust particulate samples

We developed a device and some systems for detecting benzo[a]pyrene (B[a]P) and benzo[k]fluoranthene (B[k]F). The device uses a UV light-emitting diode that emits light with a wavelength of 370 nm and a violet laser diode that emits light with a wavelength of 395 nm as excitation light sources. The detection method is based on the following observation: characteristic fluorescence is emitted from both B[a]P and B[k]F, with intensities up to 10 times greater than those from 22 other polycyclic aromatic hydrocarbons (PAHs). The excitation and emission wavelengths for fluorescence from B[a]P and B[k]F are 370 and 429 nm, and 395 and 429 nm, respectively. Further, we calculated their concentrations in diesel exhaust particles by means of two calibration curves determined using a mixture of 24 PAHs. The detection limits of the proposed device with a microchip are 5.58 microg L(-1) for B[a]P and 6.03 microg L(-1) for B[k]F. We applied this method to analyze B[a]P or B[k]F contained in three types of diesel exhaust particles, and the results agreed well with those obtained by liquid chromatography.     

Comprehensive analysis of polycyclic aromatic hydrocarbons in wastewater using stir bar sorptive extraction and gas chromatography coupled to tandem mass spectrometry

The objective of this study was the optimization and comparison of two extraction methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in wastewater (WW). A distribution study of the target compounds between the aqueous phase and the suspended particulate matter (SPM) has been performed in order to establish whether the analysis of both phases is necessary. In this sense, the feasibility of stir bar sorptive extraction (SBSE) and solid-phase extraction (SPE) for the determination of 24 PAHs in WW samples has been evaluated. The results demonstrated the suitability of SBSE to perform a comprehensive analysis of liquid samples containing high amounts of SPM, such as in the determination of PAHs in WWs. A gas chromatography triple quadrupole mass spectrometry (GC-QqQ-MS/MS) method has been also optimized for the separation and detection of the target compounds, avoiding the co-elution of some groups of isomers, such as benzo[b], [j] and [k] fluoranthenes and indene[1,2,3-cd]pyrene/dibenz[a,h]anthracene. For that purpose, a specific capillary column developed for PAH determination was used. The SBSE procedure was validated and adequate parameters (such as recovery, linearity, precision, limits of detection and quantification) were obtained. Finally, the validated method was applied to the analysis of real samples collected from an experimental WW treatment plant, detecting some PAHs at concentrations in the range 0.007-0.022 μg L(-1).     

Characterization of polychlorinated aromatic hydrocarbons by reversed-phase liquid chromatography with ultraviolet absorbance and mass spectrometric detection

Ten polychlorinated aromatic hydrocarbons (PCAHs), perchlorobenzene (I), perchlorobiphenyl (II), perchlorobenzo[f]inden-1-one (III), perchloronaphthalene (IV), perchloropenta[def]phenanthren-4-one (V), 6H-1,2,4,5,7,8,9,10,11-nonachlorobenzo[cd]pyrene-3-one (VI), perchloroacenaphthylene (VII), 6-(p-tolyl)-6H-1,2,3,4,5,7,8,9,10,11-decachlorobenzo[cd]pyrene (VIII), perchlorofluoranthene (IX) and 6-(p-tolyl)-6H-1,11-dihydroxy-2,3,4,5,7,8,9,10-octachlorobenzo[cd]pyrene (X) have been separated with reversed-phase liquid chromatography (RPLC) by using two gradient eluents (toluene/methanol and cyclohexane/methanol), and were detected by ultraviolet (UV) and mass spectrometry (MS). The separation and detection of half of these ten compounds, which are of extremely high molecular weights, is an improvement over the chromatographic analysis of PCAHs. When the procedure was applied to the analysis of PCAHs of the products from the combustion of chlorobenzene and carbon tetrachloride, I, II, IV, VIII and X could be detected.     

Quantification of benzo[a]pyrene diol epoxide DNA-adducts by stable isotope dilution liquid chromatography/tandem mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants found in car exhausts, charbroiled food, and tobacco smoke. Three pathways for the metabolic activation of B[a]P to ultimate carcinogens have been proposed. The most widely accepted pathway involves cytochrome-P450 (CYP) 1A1- and/or 1B1-mediated formation of B[a]P-7,8-oxide, which undergoes epoxide hydrolase-mediated metabolism to the proximate carcinogen B[a]P-7,8-dihydro-7,8-diol. Further CYP1A1- and/or CYP1B1-mediated activation of the dihydrodiol results in the formation of 7,8-dihydroxy-9,10-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (B[a]PDE), the ultimate carcinogen. In previous studies, it was demonstrated that (+)-anti-B[a]PDE was the most potent tumorigen of the CYP-derived B[a]PDE diastereomers. We have developed a stable isotope dilution, liquid chromatography multiple reaction monitoring/mass spectrometry (LC-MRM/MS) assay for all eight (+/-)-anti-B[a]PDE-derived dGuo and dAdo DNA-adducts. The LC-MRM/MS assay was rigorously validated and used to show that (+)-anti-trans-B[a]PDE-dGuo was the major adduct formed when naked DNA and human bronchoalveolar adenocarcinoma H358 cells were treated with (+/-)-anti-B[a]PDE. The preference for DNA-adducts derived from (+)-anti-B[a]PDE was even more apparent in cellular DNA. Thus, the increased potency of (+)-anti-B[a]PDE as a tumorigen is most likely due its ability to preferentially form DNA-adducts when compared with (-)-anti-B[a]PDE. Also, the adduct profile suggests that this occurs by binding of (+)-anti-B[a]PDE to DNA in a manner that facilitates covalent binding to dGuo rather than dAdo residues.     

Optimization of micellar liquid chromatographic separation of polycyclic aromatic hydrocarbons with the addition of second organic additive

The micellar liquid chromatographic (MLC) separations of polycyclic aromatic hydrocarbons (PAHs) were optimized for three micellar systems, cetyltrimethylammonium chloride (CTAC), dodecyltrimethylammonium chloride (DTAC), and sodium dodecylsulfate (SDS), with 1-pentanol as the only organic additive. A difference in the separation was observed between CTAC and SDS/DTAC. Under each optimized separation conditions, CTAC-modified mobile phase provides the least desirable separation, which is attributed to its longer carbon tail (C16 vs. C12). In addition to 1-pentanol, the main organic additive, a second organic additive (3% 1-propanol) in the micelle-modified mobile phase was found to enhance the resolution of PAH chromatographic peaks. However, the extent of the enhancement varies for the different micellar systems, with the greatest resolution improvement seen for CTAC, and little effect for shorter-tail SDS and DTAC. This study shows the potential use of second organic additive (1-propanol), to the main nonpolar additive (1-pentanol), in facilitating the MLC separation of larger nonpolar compounds.     

Matrix Isopotential Synchronous Fluorescence Spectroscopy for Direct Determination of 1-Hydroxypyrene as a Urinary Biomarker of Exposure to Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are present ubiquitously in the environment and exposure to PAHs is a major environmental and occupational health problem. One important approach in assessing human exposure to PAHs is to measure 1-hydroxypyrene excreted in urine. Its present analytical methods require either chromatographic separation^[1] or solvent extracting^[2]. Matrix isopotential synchronous fluorescence spectroscopy (MISFS) is a new fluorimetric technique which consists of performing synchronous scans through a trajectory joining points of equal intensity on a total fluorescence spectrum^[3]. The technique is very useful for resolving highly-spectrally-overlapped mixtures or detecting analytes in complex fluorescent background without the need for tedious prior separation.     

Trennung polyzyklisher aromatischer kohlenwasserstoffe durch hochdruckflössigkeitschromatographie: Vergleich einer bestimmung von benzo[a]pyren nach trennung an saäulen mit quervernetztem celluseacetat und einem reversed-phase system

Separation of polycyclic aromatic hydrocarbons by high-pressure liquid chromatography. Comparison of the determination of benzo(a)pyrene with separation on columns of cross-linked cellulose acetate and a reversed-phase system.

The behaviour of a new high-pressure liquid chromatographic support, i.e. a cross-linked cellulose acetate, as selective separation material for polycyclic aromatic hydrocarbons is discussed. The determination of benzo[a]pyrene is described by an example of separating a so-called benzpyrene fraction. The separation of the benzpyrene fraction was possible by combining column systems with aluminium oxide, cross-linked cellulose acetate or a reversed-phase system. By means of a fluore- scence detector 0.1-0.8 ng benzo[a]pyrene could be detected in 5μl injection volume.     

Preparation and characterization ofp-tert-butyl-calix[6]arene-bonded silica gel stationary phase for high-performance liquid chromatography

Summary For the first time calix[6]arene has been chemically combined with silica gel via a longer spacer to prepare calix[6]arene-bonded silica gel stationary phase for high-performance liquid chromatography (HPLC). The separation of positional isomers and polycyclic aromatic hydrocarbons on the calix[6]arene-bonded phase was achieved with methanol-water as mobile phase. Some nucleosides were also separated on the bonded phase. The reversed-phase chromatographic performance of the bonded phase was studied. The results showed that the calix[6]arene-bonded phase was highly hydrophobic. A possible separation mechanism has been proposed.     

A quaternary solvent system for the reverse-phase liquid-chromatographic separation of polycyclic aromatics

Modern liquid chromatographic (LC) conditions which effect a separation of polycyclic aromatic hydrocarbons (PAH) containing up to ten rings are described. The LC conditions include reverse-phase chromatographic columns in combination with a quaternary solvent system. Methanol and water are combined to form solvent system A, while tetrahydrofuran and acetonitrile form solvent system B. Solvent systems A and B are then combined in a linear gradient relationship to effect the separation. The separation of benzo(a)pyrene and perylene along with benzo(ghi)perylene and indeno (1,2,3-cd)pyrene is achieved. In the same chromatogram the PAHs, coronene, dibenzo(a,e), (a,i), (a,h)pyrene and tribenzo(a,e,i)pyrene are also separated. An increase in column temperature from 45°C to 55°C is shown to shorten the elution time and increase chromatographic resolution of many of the PAHs examined. At least 25 PAHs ranging in molecular weight from 178 to 536 are examined for their chromatographic behavior. As examples, the application of this method to samples from a coal liquefication process are included. The samples are examined with both a UV detector and fluouescence detector to demonstrate the utility of dual detectors when analyzing for PAHs in complex matrices. With minor modification of the gradient this method is applicable to PAHs containing ring systems other than those reported here.     

Development and optimisation of a dopant assisted liquid chromatographic-atmospheric pressure photo ionisation-tandem mass spectrometric method for the determination of 15+1 EU priority PAHs in edible oils

European food legislation defines a set of 16 polycyclic aromatic hydrocarbons (PAHs) as of high concern for human health. The EU set contains structurally very similar PAHs with ring numbers between 4 and 6, and so raises some separation aspects and problems, which were not experienced with traditionally analysed PAHs. Many of the currently applied gas chromatographic mass spectrometric (GC-MS) methods suffer from separation problems, while high performance liquid chromatography with fluorescence detection (HPLC-FLD) is neither capable of detecting the whole set of EU priority PAHs nor does it (compared to GC-MS) allow structural identification. In addition HPLC-FLD shows limitations with difficult matrices due to interferences. The aim of this paper is to fill this gap by describing a liquid chromatographic dopant assisted atmospheric pressure photo ionisation tandem mass spectrometric (LC-DA-APPI-MS/MS) method for the determination of 15+1 EU priority PAHs in edible oil, which complies with the requirements set by European food legislation. Measurements were performed in positive ion mode. Anisole at a flow rate of 30 μl/min was used as dopant. Sample preparation was performed offline by donor-acceptor complex chromatography (DACC). Compared to HPLC-FLD methods the presented method enables the determination of all 15+1 EU priority PAHs at the low μg/kg concentration range including less fluorescence active compounds like benzo[j]fluoranthene and indeno[1,2,3-cd]pyrene. By analysing four reference materials it could be demonstrated that this method provides accurate results and is sufficiently sensitive for food control purposes. Statistically significant differences between the reference values and the measured analyte contents were not found. The method performs well also for very complex samples. Repeatability relative standard deviations (RSDr) of the determination of the target PAHs in olive oil were for most analytes below 5%. The limit of detection (LOD) of the method met the requirement set by EU legislation (0.3 μg/kg).     

Characterization of commercial soybean products by conventional and perfusion reversed-phase high-performance liquid chromatography and multivariate analysis

Conventional and perfusion reversed-phase high-performance liquid chromatography are used to characterize commercial soybean products for human consumption. For this purpose, previously optimized methods of conventional and perfusion chromatography applied to the separation of soybean proteins are employed. Sixty different samples corresponding to 26 different trademarks of soybean products [soybean protein isolate, soybean flour, textured soybean, soybean milks (liquid and powdered), and soybean infant formulas] are analyzed. Characterization of soybean products is carried out on the basis of their protein profiles obtained by both chromatographic methods. Data obtained are processed using multivariate methods such as principal components and discriminant analysis. Perfusion chromatography enables a further and faster characterization of commercial soybean products than conventional chromatography, of great value in the quality control of this kind of product.     

Quantification of polycyclic aromatic hydrocarbons (PAHs) in human hair by HPLC with fluorescence detection: a biological monitoring method to evaluate the exposure to PAHs

A high-performance liquid chromatographic (HPLC) method with fluorescence detection was developed for the quantification of polycyclic aromatic hydrocarbons (PAHs) in human hair. Fifteen kinds of PAHs classified as priority pollutants by the US EPA were quantified with four perdeuterated PAHs as internal standards. After 50 mg hair samples were washed with n-hexane to remove external contamination of PAHs, the samples were digested in 2.5 M sodium hydroxide. The digests were extracted with n-hexane and then analyzed by HPLC. Eleven kinds of PAHs were identified in hair samples of 20 subjects, and 10 kinds of PAHs were eventually quantified using the internal standards. For anthracene, chrysene and benzo[k]fluoranthene, significant differences were observed between smokers and non-smokers. Although benzo[b]fluoranthene, dibenz[a,h]anthracene, benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were observed in the particulates of indoor and outdoor air, they were not detected in all hair samples. The analysis of PAHs in human hair should be useful as a new biomarker to evaluate the exposure to PAHs.     

稠环芳烃在烷基膦酸改性锆镁复合氧化物固定相上的反相液相色谱保留行为

 以稠环芳烃为探针,考察了烷基膦酸改性锆镁复合氧化物材料的反相色谱性能。研究了稠环芳烃类化合物的结构与其保留值的关系,比较了烷基膦酸改性锆镁复合氧化物固定相和十八烷基键合硅胶ZorbaxODS对稠环芳烃异构体的选择性,并对可能的保留机理进行了讨论。以甲醇-水(体积比为75∶25)为流动相,在烷基膦酸改性锆镁复合氧化物固定相上分离了8种稠环芳烃类化合物。     

Efficient syntheses of C(8)-aryl adducts of adenine and guanine formed by reaction of radical cation metabolites of carcinogenic polycyclic aromatic hydrocarbons with DNA

The synthesis of the C(8)-aryl adducts of adenine and guanine formed by reaction of the radical cation metabolites of carcinogenic polycyclic aromatic hydrocarbons (PAHs), such as benzo[a]pyrene (BP) and dibenzo[def,p]chrysene (DBC), with DNA is reported. The synthetic approach involves in the key step direct reaction of a PAH aldehyde with a di- or triamine precursor of a purine. The method is operationally simple, affords good yields of adducts, and is broad in its scope. The C(8)-aryl adducts of adenine and guanine derived from BP (6-BP-8-Ade and 6-BP-8-Gua) and DBC (10-DBC-8-Ade and 10-DBC-8-Gua) were synthesized in good yields by this method. Analogous C(8)-aryl adenine and guanine derivatives of other PAHs (anthracene, benz[a]anthracene, and chrysene) were also readily prepared via this approach. This method of synthesis is superior to the only method that is currently available. It entails direct reaction of short-lived PAH radical cations (generated electrochemically or chemically) with 2'-deoxyribonucleosides or the corresponding purine bases. It provides the adducts in low yields accompanied by complex mixtures of secondary products. An alternative synthesis that involves Pd-catalyzed Suzuki-Miyaura coupling of arylboronic acids with 8-bromopurine nucleosides was also investigated. Although the C(8)-purine adducts of PAHs, such as naphthalene, phenanthrene, pyrene, and chrysene, could be prepared by this method, analogous adducts of carcinogenic PAHs and other structurally related PAHs, e.g., anthracene, benz[a]anthracene, benzo[a]pyrene, and dibenzo[def,p]chrysene, could not be obtained. This difference was shown to be a consequence of the facility of competing hydrolytic deboronation of the corresponding arylboronic acids.     

稠环芳烃在烷基膦酸改性锆镁复合氧化物固定相上的反相液相色谱保留行为

以稠环芳烃为探针 ,考察了烷基膦酸改性锆镁复合氧化物材料的反相色谱性能。研究了稠环芳烃类化合物的结构与其保留值的关系 ,比较了烷基膦酸改性锆镁复合氧化物固定相和十八烷基键合硅胶 Zorbax ODS对稠环芳烃异构体的选择性 ,并对可能的保留机理进行了讨论。以甲醇 -水 (体积比为 75∶ 2 5)为流动相 ,在烷基膦酸改性锆镁复合氧化物固定相上分离了 8种稠环芳烃类化合物     

Rapid SPE-HPLC determination of the 16 European priority polycyclic aromatic hydrocarbons in olive oils

Polycyclic aromatic hydrocarbons (PAHs) are a large class of organic compounds. It has been established that the main source of exposure to these compounds for human beings is through food, particularly fats and oils, due to the lipophilic nature of these polycyclic compounds. The aim of this work was to optimise and validate a method involving SPE and HPLC for rapid determination of the 16 European Union (EU) priority PAHs (required by the Recommendation 2005/108/EC) in vegetable oils. Two spectrofluorometric detectors and a UV-Visible detector in series were used to identify and quantify the target compounds. Linearity, recoveries, LOD, and LOQ were found to be in agreement with the performance criteria for benzo[a]pyrene (BaP) analysis as required by the Commission Directive 2005/10/EC, and satisfactory for all the compounds of interest, except for cyclopenta[c,d]pyrene, which presented a very low signal in the UV. Optimised chromatographic conditions for the separation of 25 PAHs, comprising both EPA and EU priority PAHs plus benzo[e]pyrene and benzo[b]chrysene, have been also proposed.     

Enhanced sensitivity and selectivity in the detection of polycyclic aromatic hydrocarbons using sequential simplex optimization, the addition of an organic modifier and wavelength programming

Optimized separation of a mixture of 16 priority pollutant polycyclic aromatic hydrocarbons (PAHs) by high performance liquid chromatography (HPLC) using the sequential simplex optimization method was accomplished by varying the starting and ending compositions of acetonitrile and water, linear gradient time, mobile phase flow rate, column temperature and holding time of the final mobile phase composition. Focusing on the two sets of difficult-to-separate pairs (acenaphthene–fluorene and benzo[g,h,i]perylene–indeno[1,2,3-c,d]pyrene), analysis time was reduced by about ten percent through the use of an organic modifier (isopropanol or methanol), under both optimum and near-optimum conditions, while maintaining good separation of the remaining PAHs. High sensitivity for all of the 16 PAHs was achieved by wavelength programming during elution using five wavelengths (224, 235, 254 270 and 296 nm), depending upon the molar absorptivities of the individual compounds. Detection limits (DLs) ranging from 0.002 (benzo[a]pyrene) to 0.140 μg ml⁻¹ (acenaphthene) were achieved for this set of 16 standard compounds.     

Analysis of the 16 Environmental Protection Agency priority polycyclic aromatic hydrocarbons by high performance liquid chromatography-oxidized diamond film electrodes

The capabilities of using boron-doped diamond (BDD) thin films as electrode materials for analysis of the 16 US Environmental Protection Agency (EPA) priority polyaromatic hydrocarbons (PAHs) after a liquid chromatographic separation were evaluated. The BDD electrode was able to detect all 16 PAHs with high sensitivity due to the low background current and wide potential window. The method provided detection limits ranging from 12-40 nM (3-10 ppb) and repeatable results over consecutive analysis. Calibration curves were linear up to at least 10 microM for all PAHs. The work shows the promising use of diamond as an amperometric detector in high performance liquid chromatography (HPLC), especially for PAHs and other hydrophobic aromatic compounds.