Solid-state electrochemiluminescence protein biosensor with aptamer substitution strategy

One solid-state electrochemiluminescence(ECL) protein biosensor based on the competing reaction and substitute reaction between protein-to-DNA aptamer and DNA-to-DNA aptamer was proposed.Additionally,the biosensor was based on ECL photo-quenching effect of ferrocene(Fc) to tris(2,2'-bipyridyl)ruthenium(II)(Ru(bpy)32+).It was built up by modification of Au nanoparticles(AuNPs) and Ru(bpy)3 2+ on one Au electrode firstly,and then self-assembly of one special double-stranded DNA(dsDNA) onto the electrode.This ...     

In situ synthesis of gold nanoparticles on porous polyacrylonitrile nanofibers for sensing applications

A simple and cost-effective method was reported to synthesize small size (6 nm) gold nanoparticles (AuNPs) on polyacrylonitrile (PAN) electrospun nanofibers (AuNPs/PAN). The formation of AuNPs is attributed to the in situ reduction of Au(III) to Au(0) by 4-(dimethylamino)benzaldehyde doped in the PAN nanofibers. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) confirmed that the AuNPs/PAN nanofibers showed good conductivity. The AuNPs/PAN nanofibers were used to immobilize tris(2,2'-bipyridyl)ruthenium(II) ions (Ru(bpy)(3)(2+)) to form an electrochemiluminescence (ECL) sensor. The AuNPs on the PAN nanofibers exhibited an excellent catalytic effect on the ECL of Ru(bpy)(3)(2+) which could be employed to detect low concentrations of phenolic compounds. The linear response range of the ECL sensor to hydroquinone is 0.55-37 μM with limit of detection of 80 nM (S/N = 3). This sensor has been successfully applied to determine the hydroquinone content in photographic developer samples. Our work provides a very simple and cost-effective method to synthesize AuNPs on polymer nanofibers which shows great potential in the field of electrocatalysis and chemo/biosensors.     

Star-shaped electrochemiluminescent metallodendrimers with central polypyridyl Ru(II) complexes: Synthesis and their photophysical and electrochemical properties

Several dendritic bridging ligands were designed and synthesized to develop more sensitive and efficient electrochemiluminescent (ECL) polynuclear Ru(II) complexes. Various types of novel two-armed, four-armed and six-armed tris(bipyridyl)ruthenium core dendrimers were synthesized by coordinating dendritic polybipyridyl ligands with Ru(II) complexes, and the effect of the ligand and the dendritic network on the ECL characteristics were studied. Their electrochemical redox potentials, UV, photoluminescence (PL), and relative ECL intensities were also investigated in detail. The synthesized metallodendrimers exhibited strong metal-to-ligand charge transfer (MLCT) absorption at 428-451 nm and emission at 591-601 nm. Most of the newly synthesized metallodendrimers showed enhanced ECL intensities compared to the reference complex, [Ru(o-phen)₃](PF₆)₂. In particular, the ECL intensities of the six-armed heptanuclear ruthenium complexes were almost four times greater than that of [Ru(o-phen)₃]²⁺. These metallodendrimers could be utilized as efficient ECL materials and light emitting devices.     

Electrochemiluminescence Based on Solid State Tri(4,7‐diphenyl‐1,10‐phenanthroline) Ruthenium(II) Ditetrakis(4‐chlorophenyl) Borate Immobilized on Carbon Fibers

A simple method for immobilization of tri(4,7‐diphenyl‐1,10‐phenanthroline) ruthenium(II) ditetrakis(4‐chlorophenyl) borate ([Ru(dpp)₃][(4‐Clph)₄B]₂) on carbon fiber electrodes was developed. Excellent electrochemical activity and electrochemiluminescence (ECL) signal of the coated carbon fiber electrodes were observed using oxalate as the co‐reactant. In addition, the effects of pH, scan rate, nitrogen and oxygen on ECL intensity were also studied. To demonstrate the reliability, the coated carbon fiber electrodes were used as ECL detectors and very low concentration of phenol was detectable (5.0×10^?8 M).     

联吡啶钌电化学发光传感器测定海洛因

利用离子液体为粘合剂制作碳糊电极,采用高分子聚合法,合成包埋有Ru(bpy)2(dcbpy)2+的高分子聚合物,将钌聚合物掺杂于离子液体碳糊电极中,制作电化学发光传感器.结果表明,此传感器具有很好的电化学发光特性,与用石蜡油为粘合剂制作的电化学发光传感器相比,离子液体为粘合剂的电化学发光传感器检测三丙胺的检出限降低1个数量级.海洛因对电化学发光传感器的发光信号有很好的增强作用,基于此建立了高灵敏度检测海洛因的电化学发光分析法,海洛因浓度与电化学发光信号在2.0×10-9～2.0×10-5 mol/L范围内呈良好的线性关系,检出限为8×10-10 mol/L (S/N=3).将电化学发光传感器在5.0×10-9 mol/L海洛因溶液中采用线性循环电位连续扫描60圈,相对标准偏差小于2.2%.本方法用于血清中海洛因的检测,其回收率为94%～101%.     

Design of a Solid‐State Electrochemiluminescence Biosensor for Detection of PML/RARα Fusion Gene Using Ru(bpy)${{{2+\hfill \atop 3\hfill}}}$‐AuNPs Aggregations on Gold Electrode

A solid‐state electrochemiluminescence (ECL) biosensor based on special ferrocene‐labeled molecular beacon (Fc‐MB) for highly sensitive detection of promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene was developed successfully using Ru(bpy)${{{2+\hfill \atop 3\hfill}}}$ /2‐(dibutylamino)ethanol (DBAE) as detecting pattern. Such a special sensor involves two main parts, an ECL substrate and an ECL intensity switch. The ECL substrate was made by modifying the complex of Ruthenium (II) tris‐(bipyridine) and Au nanoparticles (Ru(bpy)${{{2+\hfill \atop 3\hfill}}}$ ‐AuNPs) onto the Au electrode (AuE) surface. The molecular beacon probe in which the ferrocene tag could effectively quench the ECL of the Ru(bpy)${{{2+\hfill \atop 3\hfill}}}$ acted as ECL intensity switch. The molecular beacon probe was designed with special base sequence, which could hybridize with its complementary target DNA. In the absence of a target, the hairpin structure of the probe forced the ferrocene (Fc) into close proximity with the ECL substrate, thus reducing ECL intensity. Target binding allowed the Fc away from the ECL substrate and resulted in an obvious increment in ECL intensity due to the decreased Fc quenching effect. The effect of the amount of Ru(bpy)${{{2+\hfill \atop 3\hfill}}}$ and the mixing procedure of Ru(bpy)${{{2+\hfill \atop 3\hfill}}}$ and AuNPs solution on the fabrication of ECL film had been investigated. As a result, the change of ECL intensity had a direct relationship with the logarithm of PML/RARα fusion gene concentration in the range of 0.05–500 pM with a detection limit of 7 fM, and the developed biosensor possessed good molecular recognizability in human serum. Thus, the approach holds promise for the early diagnostics and prognosis monitoring of APL and other diseases.     

A DFT Study on the Reaction Pathways for Carbon?Carbon Bond‐Forming Reactions between Propargylic Alcohols and Alkenes or Ketones Catalyzed by Thiolate‐Bridged Diruthenium Complexes

The reaction pathways of two types of the carbon? carbon bond‐forming reactions catalyzed by thiolate‐bridged diruthenium complexes have been investigated by density‐functional‐theory calculations. It is clarified that both carbon? carbon bond‐forming reactions proceed through a ruthenium–allenylidene complex as a common reactive intermediate. The attack of π electrons on propene or the vinyl alcohol on the ruthenium–allenylidene complex is the first step of the reaction pathways. The reaction pathways are different after the attack of nucleophiles on the ruthenium–alkynyl complex. In the reaction with propene, the carbon? carbon bond‐forming reaction proceeds through a stepwise process, whereas in the reaction with vinyl alcohol, it proceeds through a concerted process. The interactions between the ruthenium–allenylidene complex and propene or vinyl alcohol have been investigated by applying a simple way of looking at orbital interactions.     

Electrochemiluminescent determination of cancer cells based on aptamers, nanoparticles, and magnetic beads

Herein we report a polymerase chain reaction (PCR)-free electrochemiluminescence (ECL) approach that uses ECL nanoprobes for the determination of cancer cells with high sensitivity. The ECL nanoprobe consists of gold nanoparticles (AuNPs), linker DNA, and tris(2,2'-bipyridyl)ruthenium (TBR)-labeled signal DNA. The linker DNA and signal DNA were modified on the surface of the AuNPs through Au-S bonds. The linker DNA can partly hybridize with the aptamers of cancer cells loaded onto the magnetic beads (MB1) to construct the magnetic biocomplexes. In the presence of the cancer cells, the aptamers conjugated with the cancer cells with higher affinity. The ECL nanoprobe was released from the biocomplexes and subsequently hybridized with the capture DNA loaded onto another magnetic bead (MB2) to form the magnetic nanocomposite. The nanocomposites can be easily separated and firmly attached to an electrode on account of their excellent magnetic properties. The ECL intensity of the TBR loaded onto the nanocomposites directly reflected the amount of cancer cells. By using cell lines of Burkitt's lymphoma (Ramos cells) as a model, the ECL response was proportional to the cell concentration in the range from 5 to 100 cells ml(-1); a limit of detection as low as 5 cells ml(-1) of Ramos cells could be achieved. The proposed method described here is ideal for the diagnosis of cancers due to its high sensitivity, simplicity, and low cost.     

[Ru(bpy)2(L-Trp)]ClO4-KCl水溶液体系的电致化学发光特性研究

合成了[Ru(bpy)2(L-Trp)]ClO4, 并对其电致化学发光特性进行研究。发现在KCl溶液中, 在三角波脉冲电压作用下, 该配合物在铂电极上有电致化学发光活性。其线性动力学响应范围为5.9×10^-^9～1.2×10^-^7mol . L^-^1。当信噪比为3时, 可检测浓度为5.9×10^-^9mol . L^-^1。浓度为5.9×10^-^8mol . L^-^1时, 10次测试的相对标准偏差为5.3%。根据电化学研究的结果, 提出了该配合物的电致化学发光反应机理。     

Ultrasensitive electrogenerated chemiluminescence detection of DNA hybridization using carbon-nanotubes loaded with tris(2,2′-bipyridyl) ruthenium derivative tags

An ultrasensitive electrogenerated chemiluminescence (ECL) detection method of DNA hybridization based on single-walled carbon-nanotubes (SWNT) carrying a large number of ruthenium complex tags was developed. The probe single strand DNA (ss-DNA) and ruthenium complex were loaded at SWNT, which was taken as an ECL probe. When the capture ss-DNA with a thiol group was self-assembled onto the surface of gold electrode, and then hybridized with target ss-DNA and further hybridized with the ECL probe to form DNA sandwich conjugate, a strong ECL response was electrochemically generated. The ECL intensity was linearly related to the concentration of perfect-matched target ss-DNA in the range from 2.4 × 10⁻¹⁴ to 1.7 × 10⁻¹² M with a detection limit of 9.0 × l0⁻¹⁵ M. The ECL signal difference permitted to discriminate the perfect-matched target ss-DNA and two-base-mismatched ss-DNA. This work demonstrates that SWNT can provide an amplification platform for carrying a large number of ECL probe and thus resulting in an ultrasensitive ECL detection of DNA hybridization.     

基于DNA电化学发光传感器研究金纳米颗粒对量子点的电化学发光影响

纳米金颗粒具有高的消光系数和良好的表面等离子体共振特性, 其等离子体共振特性受纳米金颗粒的尺寸和周围环境等因素的影响. 本文基于半导体纳米晶电化学发光信号对金纳米颗粒的距离依赖性制备了DNA电化学发光传感器. 首先利用循环伏安法(CV)在玻碳电极(GCE)表面原位沉积金纳米颗粒(AuNPs), 巯基丙酸包裹的CdS量子点(QDs)与氨基修饰的双链DNA (dsDNA)通过酰胺键缩合, 形成量子点修饰的双链DNA(QDs-dsDNA). 最后将QDs-dsDNA 通过dsDNA 另一端的巯基组装到纳米金表面, 得到CdS QDs-DNA/AuNPs/GCE电化学发光传感器. 在优化电极表面QDs-dsDNA密度、金纳米颗粒沉积方法等实验条件的基础上, 对不同传感器的表面性质进行了表征, 如形貌和电化学阻抗等. 进一步通过控制纳米金和CdS QDs之间的DNA研究了纳米金对CdS QDs发光信号的影响作用. 结果显示DNA链的长度和类型对发光信号有着重要的影响. 最后将此传感器用于环境污染物的DNA损伤检测, 显示出很好的灵敏响应.     

Ultrasensitive and Signal‐on Electrochemiluminescence Aptasensor Using the Multi‐tris(bipyridine)ruthenium(II)‐β‐cyclodextrin Complexes

An ultrasensitive and signal‐on electrochemiluminescence (ECL) aptasensor to detect target protein (thrombin or lysozyme) was developed using the host‐guest recognition between a metallocyclodextrin complex and single‐stranded DNA (ss‐DNA). The aptasensor uses both the photoactive properties of the metallocyclodextrins named multi‐tris(bipyridine)ruthenium(II)‐β‐cyclodextrin complexes and their specific recognition with ss‐DNA, which amplified the ECL signal without luminophore labeling. After investigating the ECL performance of different multi‐tris(bipyridine)ruthenium(II)‐β‐cyclodextrin (multi‐Ru‐β‐CD) complexes, tris‐tris(bipyridine)‐ruthenium(II)‐β‐cyclodextrin (tris(bpyRu)‐β‐CD) was selected as a suitable host molecule to construct an atasensor. First, double‐stranded DNA (ds‐DNA) formed by hybridization of the aptamer and its target DNA was attached to a glassy carbon electrode via coupling interaction, which showed low ECL intensity with 2‐(dibutylamino) ethanol (DBAE) as coreactant, because of the weak recognition between ds‐DNA and tris(bpyRu)‐β‐CD. Upon addition of the corresponding protein, the ECL intensity increased when target ss‐DNA was released because of the higher stability of the aptamer‐protein complex than the aptamer‐DNA one. A linear relationship was observed in the range of 0.01 pmol/L to 100 pmol/L between ECL intensity and the logarithm of thrombin concentrations with a limited detection of 8.5 fmol/L (S/N=3). Meanwhile, the measured concentration of lysozyme was from 0.05 pmol/L to 500 pmol/L and the detection limit was 33 fmol/L (S/N=3). The investigations of proteins in human serum samples were also performed to demonstrate the validity of detection in real clinical samples. The simplicity, high sensitivity and specificity of this aptasensor show great promise for practical applications in protein monitoring and disease diagnosis.     

Amine‐Rich Nitrogen‐Doped Carbon Nanodots as a Platform for Self‐Enhancing Electrochemiluminescence

Amine‐rich nitrogen‐doped carbon nanodots (NCNDs) have been successfully used as co‐reactant in electrochemiluminescence (ECL) processes. Primary or tertiary amino groups on NCNDs have been studied as co‐reactant sites for Ru(bpy)₃²⁺ ECL, showing their eligibility as powerful alternatives to tripropylamine (TPrA). We also report the synthesis and ECL behavior of a new covalently linked hybrid of NCNDs and Ru(bpy)₃²⁺. Notably, the NCNDs in the hybrid act both as carrier for ECL labels and as co‐reactant for ECL generation. As a result, the hybrid shows a higher ECL emission as compared to the combination of the individual components, suggesting the self‐enhancing ECL of the ruthenium complex due to an intramolecular electron transfer process.     

Electrochemiluminescence Immunosensor Based on Functionalized Graphene/Fe3O4‐Au Magnetic Capture Probes for Ultrasensitive Detection of Tetrodotoxin

An ultrasensitive electrochemiluminescence (ECL) immunosensor for the detection of tetrodotoxin (TTX) is proposed, which are composed of the branched poly‐(ethylenimine) (BPEI) functionalized graphene (BGNs)/Fe₃O₄‐Au magnetic capture probes and luminol‐capped gold nanocomposites (luminol‐AuNPs) as the signal tag. Herein, a typical sandwich immunecomplex was constructed on the glassy carbon electrode. The BGNs/Fe₃O₄‐Au hybrids could efficiently conjugate primary antibody via the Au−S chemical bonds or Au−N chemical bonds and rapidly separate under external magnetic field. The introduction of BPEI to GO could enhance the luminol‐ECL intensity. Meanwhile, the multifunctional nanocomposites have been proved with good water‐solubility, excellent electron transfer, outstanding stability, etc. The luminescent luminol‐AuNPs, a high efficient electrochemiluminescence marker, can be assembled on the second antibody, which can produce the ECL signal to achieve the determination of TTX. This proposed ECL immunosensor with a linear range from 0.01–100 ng/mL can be applied in the detection of TTX in real samples with satisfactory results.     

金属离子对联吡啶钌电致化学发光影响的研究

在玻碳电极上, 联吡啶钌[Ru(bpy)₃^2＋]于＋1.50 V (vs. Ag/AgCl)左右被氧化为Ru(bpy)₃^3＋, 该氧化态离子与碱性水溶液中(pH 8.2)的OH•反应生成激发态的[Ru(bpy)₃^2＋*]而发光. 研究比较了15种金属离子对Ru(bpy)₃^2＋碱性水溶液电致化学发光的影响, 并对这些影响进行了初步的解释.     

联吡啶钌电化学发光研究进展

联吡啶钌电化学发光在免疫分析、核酸分析、共反应物分析和适配子传感器等方面具有广泛的应用前景,成为在诸多电化学发光体系如9,10-二苯基蒽、光泽精、联吡啶钌、过氧化草酸酯、鲁米诺、石墨烯和量子点等之中近年来国际上研究最多的电化学发光体系之一.本综述对已发表的绝大多数联吡啶钌电化学发光成果加以归纳总结,简要介绍联吡啶钌电化学发光的概况,并尝试展望其今后的研究趋势.     

Photoluminescent and electrochemiluminescent dual-signaling probe for bio-thiols based on a ruthenium(II) complex

Photoluminescence (PL) and electrochemiluminescence (ECL) detection techniques are highly sensitive and widely used methods for clinical diagnostics and analytical biotechnology. In this work, a unique ruthenium(II) complex, [Ru(bpy)₂(DNBSO-bpy)](PF₆)₂ (bpy: 2,2′-bipyridine; DNBSO-bpy: 2,4-dinitrobenzenesulfonate of 4-(4-hydroxyphenyl)-2,2′-bipyridine), has been designed and synthesized as a highly sensitive and selective PL and ECL dual-signaling probe for the recognition and detection of bio-thiols in aqueous media. As a thiol-responsive probe, the complex can specifically and rapidly react with bio-thiols in aqueous solutions to yield a bipyridine-Ru(II) complex derivative, [Ru(bpy)₂(HP-bpy)]²⁺ (HP-bpy: 4-(4-hydroxyphenyl)-2,2′-bipyridine), accompanied by the remarkable PL and ECL enhancements. The complex was used as a probe for the PL and ECL detections of cysteine (Cys) and glutathione (GSH) in aqueous solutions. The dose-dependent PL and ECL enhancements showed good linear relationships against the Cys/GSH concentrations with the detection limits at nano-molar concentration level. Moreover, the complex-loaded HeLa cells were prepared for PL imaging of the endogenous intracellular thiols. The results demonstrated the practical utility of the complex as a cell-membrane permeable probe for PL imaging detection of bio-thiols in living cells.     

Determination of β-blockers in pharmaceutical preparations and human urine by high-performance liquid chromatography with tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence detection

A highly selective and sensitive detection method based on tris(2,2′-bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] electrogenerated chemiluminescence (ECL) has been developed for the quantitative determination of β-blockers in both pharmaceutical preparations and human urine samples. The ECL emission is based on the reaction between electro-oxidized Ru(bpy)₃³⁺ and the secondary amino groups on the β-blockers. The ECL intensities for the β-blockers were strongly dependent on the pH at which the ECL detections were conducted, with the maximum intensities being obtained at pH 9.0. Under the optimal condition, the detection limit for atenolol and metoprolol were almost 0.5 μM (50 pmol) and 0.08 μM (8 pmol), respectively, with S/N of 3 and a linear working range that extends four orders of magnitude with relative standard deviations below 5% for 10 replicate injected samples. The concentrations of atenolol and metoprolol were determined in pharmaceutical preparations using flow injection analysis with Ru(bpy)₃²⁺ ECL detection based on standard addition method. The determined values by the present method showed acceptable agreement with the stated values by manufacturers. The determination of the five β-blockers in human urine samples was performed using HPLC-Ru(bpy)₃²⁺ ECL detection. The resulting chromatogram was much simpler than that obtained with HPLC-UV absorbance detection.     

Electrogenerated Chemiluminescence Ethanol Biosensor Based on Carbon Nanotube‐Titania‐Nafion Composite Film

Mesoporous titania‐Nafion composite doped with carbon nanotube (CNT) has been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) and alcohol dehydrogenase on an electrode surface to yield a highly sensitive and stable electrogenerated chemiluminescence (ECL) ethanol biosensor. The presence of CNT in the composite film increases not only the sensitivity of the ECL biosensor but also the long‐term stability of the biosensor. The present biosensor responds linearly to ethanol in the wide concentration ranges from 1.0×10^?5 M to 1.0×10^?1 M with a detection limit of 5.0×10^?6 M (S/N=3). The present ECL ethanol biosensor exhibited higher ECL response compared to that obtained with the ECL biosensor based on the corresponding composite without CNT. The present CNT‐based ECL biosensor showed good long‐term stability with 75% of its initial activity retained after 2 weeks of storage in 50 mM phosphate buffer at pH 7.0.